From: Vitaly Kuznetsov <vkuznets@redhat.com>
To: qemu-devel@nongnu.org
Cc: Paolo Bonzini <pbonzini@redhat.com>,
Marcelo Tosatti <mtosatti@redhat.com>,
Eduardo Habkost <ehabkost@redhat.com>
Subject: [PATCH RFC 13/22] i386: split hyperv_handle_properties() into hyperv_expand_features()/hyperv_fill_cpuids()
Date: Fri, 4 Sep 2020 16:54:22 +0200 [thread overview]
Message-ID: <20200904145431.196885-14-vkuznets@redhat.com> (raw)
In-Reply-To: <20200904145431.196885-1-vkuznets@redhat.com>
The intention is to call hyperv_expand_features() early, before vCPUs
are created and use the acquired data later when we set guest visible
CPUID data.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
---
target/i386/kvm.c | 45 +++++++++++++++++++++++++++++----------------
1 file changed, 29 insertions(+), 16 deletions(-)
diff --git a/target/i386/kvm.c b/target/i386/kvm.c
index b7f0e200a75f..c4bb147090a9 100644
--- a/target/i386/kvm.c
+++ b/target/i386/kvm.c
@@ -1177,18 +1177,18 @@ static int hv_cpuid_check_and_set(CPUState *cs, struct kvm_cpuid2 *cpuid,
}
/*
- * Fill in Hyper-V CPUIDs. Returns the number of entries filled in cpuid_ent in
- * case of success, errno < 0 in case of failure and 0 when no Hyper-V
- * extentions are enabled.
+ * Expand Hyper-V CPU features. In partucular, check that all the requested
+ * features are supported by the host and the sanity of the configuration
+ * (that all the required dependencies are included). Also, this takes care
+ * of 'hv_passthrough' mode and fills the environment with all supported
+ * Hyper-V features.
*/
-static int hyperv_handle_properties(CPUState *cs,
- struct kvm_cpuid_entry2 *cpuid_ent)
+static int hyperv_expand_features(CPUState *cs)
{
X86CPU *cpu = X86_CPU(cs);
CPUX86State *env = &cpu->env;
struct kvm_cpuid2 *cpuid;
struct kvm_cpuid_entry2 *c;
- uint32_t cpuid_i = 0;
int r;
if (!hyperv_enabled(cpu))
@@ -1317,11 +1317,26 @@ static int hyperv_handle_properties(CPUState *cs,
/* Not exposed by KVM but needed to make CPU hotplug in Windows work */
env->features[FEAT_HYPERV_EDX] |= HV_CPU_DYNAMIC_PARTITIONING_AVAILABLE;
+ g_free(cpuid);
+
if (r) {
- r = -ENOSYS;
- goto free;
+ return -ENOSYS;
}
+ return 0;
+}
+
+/*
+ * Fill in Hyper-V CPUIDs. Returns the number of entries filled in cpuid_ent.
+ */
+static int hyperv_fill_cpuids(CPUState *cs,
+ struct kvm_cpuid_entry2 *cpuid_ent)
+{
+ X86CPU *cpu = X86_CPU(cs);
+ CPUX86State *env = &cpu->env;
+ struct kvm_cpuid_entry2 *c;
+ uint32_t cpuid_i = 0;
+
c = &cpuid_ent[cpuid_i++];
c->function = HV_CPUID_VENDOR_AND_MAX_FUNCTIONS;
c->eax = hyperv_feat_enabled(cpu, HYPERV_FEAT_EVMCS) ?
@@ -1382,12 +1397,8 @@ static int hyperv_handle_properties(CPUState *cs,
c->ecx = env->features[FEAT_HV_NESTED_ECX];
c->edx = env->features[FEAT_HV_NESTED_EDX];
}
- r = cpuid_i;
-free:
- g_free(cpuid);
-
- return r;
+ return cpuid_i;
}
static Error *hv_passthrough_mig_blocker;
@@ -1529,11 +1540,13 @@ int kvm_arch_init_vcpu(CPUState *cs)
env->apic_bus_freq = KVM_APIC_BUS_FREQUENCY;
/* Paravirtualization CPUIDs */
- r = hyperv_handle_properties(cs, cpuid_data.entries);
+ r = hyperv_expand_features(cs);
if (r < 0) {
return r;
- } else if (r > 0) {
- cpuid_i = r;
+ }
+
+ if (hyperv_enabled(cpu)) {
+ cpuid_i = hyperv_fill_cpuids(cs, cpuid_data.entries);
kvm_base = KVM_CPUID_SIGNATURE_NEXT;
has_msr_hv_hypercall = true;
}
--
2.25.4
next prev parent reply other threads:[~2020-09-04 15:02 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-09-04 14:54 [PATCH RFC 00/22] i386: KVM: expand Hyper-V features early Vitaly Kuznetsov
2020-09-04 14:54 ` [PATCH RFC 01/22] WIP: update linux/headers Vitaly Kuznetsov
2020-09-04 14:54 ` [PATCH RFC 02/22] i386: drop x86_cpu_get_supported_feature_word() forward declaration Vitaly Kuznetsov
2020-09-04 14:54 ` [PATCH RFC 03/22] i386: move hyperv_vendor_id initialization to x86_cpu_realizefn() Vitaly Kuznetsov
2020-09-18 22:14 ` Eduardo Habkost
2020-09-22 10:23 ` Vitaly Kuznetsov
2020-09-04 14:54 ` [PATCH RFC 04/22] i386: move hyperv_interface_id " Vitaly Kuznetsov
2020-09-18 22:23 ` Eduardo Habkost
2020-09-04 14:54 ` [PATCH RFC 05/22] i386: move hyperv_version_id " Vitaly Kuznetsov
2020-09-18 22:15 ` Eduardo Habkost
2020-09-04 14:54 ` [PATCH RFC 06/22] i386: move hyperv_limits " Vitaly Kuznetsov
2020-09-18 22:16 ` Eduardo Habkost
2020-09-04 14:54 ` [PATCH RFC 07/22] i386: fill in FEAT_HYPERV_EDX from edx instead of eax Vitaly Kuznetsov
2020-09-18 22:21 ` Eduardo Habkost
2020-09-04 14:54 ` [PATCH RFC 08/22] i386: invert hyperv_spinlock_attempts setting logic with hv_passthrough Vitaly Kuznetsov
2020-09-04 14:54 ` [PATCH RFC 09/22] i386: add reserved FEAT_HYPERV_ECX CPUID leaf Vitaly Kuznetsov
2020-09-18 22:25 ` Eduardo Habkost
2020-09-22 10:27 ` Vitaly Kuznetsov
2020-09-04 14:54 ` [PATCH RFC 10/22] i386: add reserved FEAT_HV_RECOMM_ECX/FEAT_HV_RECOMM_EDX CPUID leaves Vitaly Kuznetsov
2020-09-04 14:54 ` [PATCH RFC 11/22] i386: add reserved FEAT_HV_NESTED_EBX/ECX/EDX " Vitaly Kuznetsov
2020-09-04 14:54 ` [PATCH RFC 12/22] i386: always fill Hyper-V CPUID feature leaves from X86CPU data Vitaly Kuznetsov
2020-09-18 22:32 ` Eduardo Habkost
2020-09-22 10:30 ` Vitaly Kuznetsov
2020-09-04 14:54 ` Vitaly Kuznetsov [this message]
2020-09-04 14:54 ` [PATCH RFC 14/22] i386: move eVMCS enablement to hyperv_init_vcpu() Vitaly Kuznetsov
2020-09-04 14:54 ` [PATCH RFC 15/22] i386: switch hyperv_expand_features() to using error_setg() Vitaly Kuznetsov
2020-09-04 14:54 ` [PATCH RFC 16/22] i386: make hyperv_expand_features() return void Vitaly Kuznetsov
2020-09-04 14:54 ` [PATCH RFC 17/22] i386: adjust the expected KVM_GET_SUPPORTED_HV_CPUID array size Vitaly Kuznetsov
2020-09-04 14:54 ` [PATCH RFC 18/22] i386: prefer system KVM_GET_SUPPORTED_HV_CPUID ioctl over vCPU's one Vitaly Kuznetsov
2020-09-04 14:54 ` [PATCH RFC 19/22] i386: prepare hyperv_expand_features() to be called at CPU feature expansion time Vitaly Kuznetsov
2020-09-04 14:54 ` [PATCH RFC 20/22] i386: use global kvm_state in hyperv_enabled() check Vitaly Kuznetsov
2020-09-04 14:54 ` [PATCH RFC 21/22] i386: record if Hyper-V features were already expanded Vitaly Kuznetsov
2020-09-04 14:54 ` [PATCH RFC 22/22] i386: expand Hyper-V features early Vitaly Kuznetsov
2020-09-18 22:38 ` Eduardo Habkost
2020-09-22 10:33 ` Vitaly Kuznetsov
2020-09-18 22:47 ` Eduardo Habkost
2020-09-22 10:37 ` Vitaly Kuznetsov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200904145431.196885-14-vkuznets@redhat.com \
--to=vkuznets@redhat.com \
--cc=ehabkost@redhat.com \
--cc=mtosatti@redhat.com \
--cc=pbonzini@redhat.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).