From: Kevin Wolf <kwolf@redhat.com>
To: qemu-block@nongnu.org
Cc: kwolf@redhat.com, peter.maydell@linaro.org, qemu-devel@nongnu.org
Subject: [PULL 32/64] block: Flush all children in generic code
Date: Mon, 7 Sep 2020 13:09:04 +0200 [thread overview]
Message-ID: <20200907110936.261684-33-kwolf@redhat.com> (raw)
In-Reply-To: <20200907110936.261684-1-kwolf@redhat.com>
From: Max Reitz <mreitz@redhat.com>
If the driver does not support .bdrv_co_flush() so bdrv_co_flush()
itself has to flush the children of the given node, it should not flush
just bs->file->bs, but in fact all children that might have been written
to (judging from the permissions taken on them).
This is a bug fix for qcow2 images with an external data file, as they
so far did not flush that data_file node.
In any case, the BLKDBG_EVENT() should be emitted on the primary child,
because that is where a blkdebug node would be if there is any.
Suggested-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
---
block/io.c | 23 +++++++++++++++++------
1 file changed, 17 insertions(+), 6 deletions(-)
diff --git a/block/io.c b/block/io.c
index 6f9402117e..8d777cd0ec 100644
--- a/block/io.c
+++ b/block/io.c
@@ -2771,6 +2771,8 @@ static int coroutine_fn bdrv_flush_co_entry(void *opaque)
int coroutine_fn bdrv_co_flush(BlockDriverState *bs)
{
+ BdrvChild *primary_child = bdrv_primary_child(bs);
+ BdrvChild *child;
int current_gen;
int ret = 0;
@@ -2800,7 +2802,7 @@ int coroutine_fn bdrv_co_flush(BlockDriverState *bs)
}
/* Write back cached data to the OS even with cache=unsafe */
- BLKDBG_EVENT(bs->file, BLKDBG_FLUSH_TO_OS);
+ BLKDBG_EVENT(primary_child, BLKDBG_FLUSH_TO_OS);
if (bs->drv->bdrv_co_flush_to_os) {
ret = bs->drv->bdrv_co_flush_to_os(bs);
if (ret < 0) {
@@ -2810,15 +2812,15 @@ int coroutine_fn bdrv_co_flush(BlockDriverState *bs)
/* But don't actually force it to the disk with cache=unsafe */
if (bs->open_flags & BDRV_O_NO_FLUSH) {
- goto flush_parent;
+ goto flush_children;
}
/* Check if we really need to flush anything */
if (bs->flushed_gen == current_gen) {
- goto flush_parent;
+ goto flush_children;
}
- BLKDBG_EVENT(bs->file, BLKDBG_FLUSH_TO_DISK);
+ BLKDBG_EVENT(primary_child, BLKDBG_FLUSH_TO_DISK);
if (!bs->drv) {
/* bs->drv->bdrv_co_flush() might have ejected the BDS
* (even in case of apparent success) */
@@ -2862,8 +2864,17 @@ int coroutine_fn bdrv_co_flush(BlockDriverState *bs)
/* Now flush the underlying protocol. It will also have BDRV_O_NO_FLUSH
* in the case of cache=unsafe, so there are no useless flushes.
*/
-flush_parent:
- ret = bs->file ? bdrv_co_flush(bs->file->bs) : 0;
+flush_children:
+ ret = 0;
+ QLIST_FOREACH(child, &bs->children, next) {
+ if (child->perm & (BLK_PERM_WRITE | BLK_PERM_WRITE_UNCHANGED)) {
+ int this_child_ret = bdrv_co_flush(child->bs);
+ if (!ret) {
+ ret = this_child_ret;
+ }
+ }
+ }
+
out:
/* Notify any pending flushes that we have completed */
if (ret == 0) {
--
2.25.4
next prev parent reply other threads:[~2020-09-07 11:25 UTC|newest]
Thread overview: 72+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-09-07 11:08 [PULL 00/64] Block layer patches Kevin Wolf
2020-09-07 11:08 ` [PULL 01/64] block: Raise an error when backing file parameter is an empty string Kevin Wolf
2020-09-07 11:08 ` [PULL 02/64] block/nvme: Replace magic value by SCALE_MS definition Kevin Wolf
2020-09-07 11:08 ` [PULL 03/64] block/nvme: Avoid further processing if trace event not enabled Kevin Wolf
2020-09-07 11:08 ` [PULL 04/64] block/nvme: Let nvme_create_queue_pair() fail gracefully Kevin Wolf
2020-09-07 11:08 ` [PULL 05/64] block/nvme: Define INDEX macros to ease code review Kevin Wolf
2020-09-07 11:08 ` [PULL 06/64] block/nvme: Improve error message when IO queue creation failed Kevin Wolf
2020-09-07 11:08 ` [PULL 07/64] block/nvme: Use common error path in nvme_add_io_queue() Kevin Wolf
2020-09-07 11:08 ` [PULL 08/64] block/nvme: Rename local variable Kevin Wolf
2020-09-07 11:08 ` [PULL 09/64] block/nvme: Use union of NvmeIdCtrl / NvmeIdNs structures Kevin Wolf
2020-09-07 11:08 ` [PULL 10/64] block/nvme: Replace qemu_try_blockalign0 by qemu_try_blockalign/memset Kevin Wolf
2020-09-07 11:08 ` [PULL 11/64] block/nvme: Replace qemu_try_blockalign(bs) by qemu_try_memalign(pg_sz) Kevin Wolf
2020-09-07 11:08 ` [PULL 12/64] block/nvme: Simplify nvme_init_queue() arguments Kevin Wolf
2020-09-07 11:08 ` [PULL 13/64] block/nvme: Replace BDRV_POLL_WHILE by AIO_WAIT_WHILE Kevin Wolf
2020-09-07 11:08 ` [PULL 14/64] block/nvme: Simplify nvme_create_queue_pair() arguments Kevin Wolf
2020-09-07 11:08 ` [PULL 15/64] block/nvme: Extract nvme_poll_queue() Kevin Wolf
2020-09-07 11:08 ` [PULL 16/64] block/nvme: Use an array of EventNotifier Kevin Wolf
2020-09-07 11:08 ` [PULL 17/64] block: Add child access functions Kevin Wolf
2020-09-07 11:08 ` [PULL 18/64] block: Add chain helper functions Kevin Wolf
2020-09-07 11:08 ` [PULL 19/64] block: bdrv_cow_child() for bdrv_has_zero_init() Kevin Wolf
2020-09-07 11:08 ` [PULL 20/64] block: bdrv_set_backing_hd() is about bs->backing Kevin Wolf
2020-09-07 11:08 ` [PULL 21/64] block: Include filters when freezing backing chain Kevin Wolf
2020-09-07 11:08 ` [PULL 22/64] block: Drop bdrv_is_encrypted() Kevin Wolf
2020-09-07 11:08 ` [PULL 23/64] block: Add bdrv_supports_compressed_writes() Kevin Wolf
2020-09-07 11:08 ` [PULL 24/64] throttle: Support compressed writes Kevin Wolf
2020-09-07 11:08 ` [PULL 25/64] copy-on-read: " Kevin Wolf
2020-09-07 11:08 ` [PULL 26/64] block: Use bdrv_filter_(bs|child) where obvious Kevin Wolf
2020-09-07 11:08 ` [PULL 27/64] block: Use CAFs in block status functions Kevin Wolf
2020-09-07 11:09 ` [PULL 28/64] stream: Deal with filters Kevin Wolf
2020-09-07 11:09 ` [PULL 29/64] block: Use CAFs when working with backing chains Kevin Wolf
2020-09-07 11:09 ` [PULL 30/64] block: Use bdrv_cow_child() in bdrv_co_truncate() Kevin Wolf
2020-09-07 11:09 ` [PULL 31/64] block: Re-evaluate backing file handling in reopen Kevin Wolf
2020-09-07 11:09 ` Kevin Wolf [this message]
2020-09-07 11:09 ` [PULL 33/64] vmdk: Drop vmdk_co_flush() Kevin Wolf
2020-09-07 11:09 ` [PULL 34/64] block: Iterate over children in refresh_limits Kevin Wolf
2020-09-07 11:09 ` [PULL 35/64] block: Use CAFs in bdrv_refresh_filename() Kevin Wolf
2020-09-07 11:09 ` [PULL 36/64] block: Use CAF in bdrv_co_rw_vmstate() Kevin Wolf
2020-09-07 11:09 ` [PULL 37/64] block/snapshot: Fix fallback Kevin Wolf
2021-04-30 22:30 ` Peter Maydell
2021-05-03 9:40 ` Kevin Wolf
2021-05-03 9:45 ` Max Reitz
2021-05-03 10:17 ` Kevin Wolf
2020-09-07 11:09 ` [PULL 38/64] block: Use CAFs for debug breakpoints Kevin Wolf
2020-09-07 11:09 ` [PULL 39/64] block: Improve get_allocated_file_size's default Kevin Wolf
2020-09-07 11:09 ` [PULL 40/64] block/null: Implement bdrv_get_allocated_file_size Kevin Wolf
2020-09-07 11:09 ` [PULL 41/64] blockdev: Use CAF in external_snapshot_prepare() Kevin Wolf
2020-09-07 11:09 ` [PULL 42/64] block: Report data child for query-blockstats Kevin Wolf
2020-09-07 11:09 ` [PULL 43/64] block: Use child access functions for QAPI queries Kevin Wolf
2020-09-07 11:09 ` [PULL 44/64] block-copy: Use CAF to find sync=top base Kevin Wolf
2020-09-07 11:09 ` [PULL 45/64] mirror: Deal with filters Kevin Wolf
2020-09-07 11:09 ` [PULL 46/64] backup: " Kevin Wolf
2020-09-07 11:09 ` [PULL 47/64] commit: " Kevin Wolf
2020-09-07 11:09 ` [PULL 48/64] nbd: Use CAF when looking for dirty bitmap Kevin Wolf
2020-09-07 11:09 ` [PULL 49/64] qemu-img: Use child access functions Kevin Wolf
2020-09-07 11:09 ` [PULL 50/64] block: Drop backing_bs() Kevin Wolf
2020-09-07 11:09 ` [PULL 51/64] blockdev: Fix active commit choice Kevin Wolf
2020-09-07 11:09 ` [PULL 52/64] block: Inline bdrv_co_block_status_from_*() Kevin Wolf
2020-09-07 11:09 ` [PULL 53/64] block: Leave BDS.backing_{file,format} constant Kevin Wolf
2020-09-07 11:09 ` [PULL 54/64] iotests: Test that qcow2's data-file is flushed Kevin Wolf
2020-09-07 11:09 ` [PULL 55/64] iotests: Let complete_and_wait() work with commit Kevin Wolf
2020-09-07 11:09 ` [PULL 56/64] iotests: Add filter commit test cases Kevin Wolf
2020-09-07 11:09 ` [PULL 57/64] iotests: Add filter mirror " Kevin Wolf
2020-09-07 11:09 ` [PULL 58/64] iotests: Add test for commit in sub directory Kevin Wolf
2020-09-07 11:09 ` [PULL 59/64] iotests: Test committing to overridden backing Kevin Wolf
2020-09-07 11:09 ` [PULL 60/64] iotests: Allow running from different directory Kevin Wolf
2020-09-07 11:09 ` [PULL 61/64] file-win32: Fix "locking" option Kevin Wolf
2020-09-07 11:09 ` [PULL 62/64] block/nvme: Group controller registers in NVMeRegs structure Kevin Wolf
2020-09-07 11:09 ` [PULL 63/64] block/nvme: Use generic NvmeBar structure Kevin Wolf
2020-09-07 11:09 ` [PULL 64/64] block/nvme: Pair doorbell registers Kevin Wolf
2020-09-07 20:22 ` [PULL 00/64] Block layer patches Peter Maydell
2020-09-08 7:01 ` Kevin Wolf
2020-09-08 9:01 ` Max Reitz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200907110936.261684-33-kwolf@redhat.com \
--to=kwolf@redhat.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-block@nongnu.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).