From: "Michael S. Tsirkin" <mst@redhat.com> To: qemu-devel@nongnu.org Cc: Peter Maydell <peter.maydell@linaro.org>, Jason Wang <jasowang@redhat.com> Subject: [PULL 03/15] vhost-vdpa: batch updating IOTLB mappings Date: Fri, 18 Sep 2020 11:05:57 -0400 [thread overview] Message-ID: <20200918150506.286890-4-mst@redhat.com> (raw) In-Reply-To: <20200918150506.286890-1-mst@redhat.com> From: Jason Wang <jasowang@redhat.com> To speed up the memory mapping updating between vhost-vDPA and vDPA device driver, this patch passes the IOTLB batching flags via IOTLB API. Two new flags was introduced, VHOST_IOTLB_BATCH_BEGIN is a hint that a bathced IOTLB updating may be initiated from the userspace. VHOST_IOTLB_BATCH_END is a hint that userspace has finished the updating: VHOST_IOTLB_BATCH_BEGIN VHOST_IOTLB_UPDATE/VHOST_IOTLB_INVALIDATE ... VHOST_IOTLB_BATCH_END Vhost-vDPA can then know that all mappings has been set and can do optimization like passing all the mappings to the vDPA device driver. Signed-off-by: Jason Wang <jasowang@redhat.com> Message-Id: <20200907104903.31551-4-jasowang@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> --- include/hw/virtio/vhost-vdpa.h | 1 + hw/virtio/vhost-vdpa.c | 66 ++++++++++++++++++++++++++++++++++ 2 files changed, 67 insertions(+) diff --git a/include/hw/virtio/vhost-vdpa.h b/include/hw/virtio/vhost-vdpa.h index 6455663388..9b81a409da 100644 --- a/include/hw/virtio/vhost-vdpa.h +++ b/include/hw/virtio/vhost-vdpa.h @@ -18,6 +18,7 @@ typedef struct vhost_vdpa { int device_fd; uint32_t msg_type; MemoryListener listener; + struct vhost_dev *dev; } VhostVDPA; extern AddressSpace address_space_memory; diff --git a/hw/virtio/vhost-vdpa.c b/hw/virtio/vhost-vdpa.c index 4580f3efd8..ba1ae3ea44 100644 --- a/hw/virtio/vhost-vdpa.c +++ b/hw/virtio/vhost-vdpa.c @@ -78,6 +78,46 @@ static int vhost_vdpa_dma_unmap(struct vhost_vdpa *v, hwaddr iova, return ret; } +static void vhost_vdpa_listener_begin(MemoryListener *listener) +{ + struct vhost_vdpa *v = container_of(listener, struct vhost_vdpa, listener); + struct vhost_dev *dev = v->dev; + struct vhost_msg_v2 msg; + int fd = v->device_fd; + + if (!(dev->backend_cap & (0x1ULL << VHOST_BACKEND_F_IOTLB_BATCH))) { + return; + } + + msg.type = v->msg_type; + msg.iotlb.type = VHOST_IOTLB_BATCH_BEGIN; + + if (write(fd, &msg, sizeof(msg)) != sizeof(msg)) { + error_report("failed to write, fd=%d, errno=%d (%s)", + fd, errno, strerror(errno)); + } +} + +static void vhost_vdpa_listener_commit(MemoryListener *listener) +{ + struct vhost_vdpa *v = container_of(listener, struct vhost_vdpa, listener); + struct vhost_dev *dev = v->dev; + struct vhost_msg_v2 msg; + int fd = v->device_fd; + + if (!(dev->backend_cap & (0x1ULL << VHOST_BACKEND_F_IOTLB_BATCH))) { + return; + } + + msg.type = v->msg_type; + msg.iotlb.type = VHOST_IOTLB_BATCH_END; + + if (write(fd, &msg, sizeof(msg)) != sizeof(msg)) { + error_report("failed to write, fd=%d, errno=%d (%s)", + fd, errno, strerror(errno)); + } +} + static void vhost_vdpa_listener_region_add(MemoryListener *listener, MemoryRegionSection *section) { @@ -191,6 +231,8 @@ static void vhost_vdpa_listener_region_del(MemoryListener *listener, * depends on the addnop(). */ static const MemoryListener vhost_vdpa_memory_listener = { + .begin = vhost_vdpa_listener_begin, + .commit = vhost_vdpa_listener_commit, .region_add = vhost_vdpa_listener_region_add, .region_del = vhost_vdpa_listener_region_del, }; @@ -226,6 +268,7 @@ static int vhost_vdpa_init(struct vhost_dev *dev, void *opaque) assert(dev->vhost_ops->backend_type == VHOST_BACKEND_TYPE_VDPA); v = opaque; + v->dev = dev; dev->opaque = opaque ; vhost_vdpa_call(dev, VHOST_GET_FEATURES, &features); dev->backend_features = features; @@ -280,6 +323,28 @@ static int vhost_vdpa_set_features(struct vhost_dev *dev, return !(status & VIRTIO_CONFIG_S_FEATURES_OK); } +static int vhost_vdpa_set_backend_cap(struct vhost_dev *dev) +{ + uint64_t features; + uint64_t f = 0x1ULL << VHOST_BACKEND_F_IOTLB_MSG_V2 | + 0x1ULL << VHOST_BACKEND_F_IOTLB_BATCH; + int r; + + if (vhost_vdpa_call(dev, VHOST_GET_BACKEND_FEATURES, &features)) { + return 0; + } + + features &= f; + r = vhost_vdpa_call(dev, VHOST_SET_BACKEND_FEATURES, &features); + if (r) { + return 0; + } + + dev->backend_cap = features; + + return 0; +} + int vhost_vdpa_get_device_id(struct vhost_dev *dev, uint32_t *device_id) { @@ -452,6 +517,7 @@ const VhostOps vdpa_ops = { .vhost_set_vring_kick = vhost_vdpa_set_vring_kick, .vhost_set_vring_call = vhost_vdpa_set_vring_call, .vhost_get_features = vhost_vdpa_get_features, + .vhost_set_backend_cap = vhost_vdpa_set_backend_cap, .vhost_set_owner = vhost_vdpa_set_owner, .vhost_set_vring_endian = NULL, .vhost_backend_memslots_limit = vhost_vdpa_memslots_limit, -- MST
WARNING: multiple messages have this Message-ID (diff)
From: "Michael S. Tsirkin" <mst@redhat.com> To: qemu-devel@nongnu.org Cc: Peter Maydell <peter.maydell@linaro.org>, Jason Wang <jasowang@redhat.com> Subject: [PULL 03/15] vhost-vdpa: batch updating IOTLB mappings Date: Fri, 18 Sep 2020 11:06:47 -0400 [thread overview] Message-ID: <20200918150506.286890-4-mst@redhat.com> (raw) Message-ID: <20200918150647.boSYrJ3UuQnOZLQVEtRd5UNASEPsIdC1thwH9BRxVro@z> (raw) In-Reply-To: <20200918150506.286890-1-mst@redhat.com> From: Jason Wang <jasowang@redhat.com> To speed up the memory mapping updating between vhost-vDPA and vDPA device driver, this patch passes the IOTLB batching flags via IOTLB API. Two new flags was introduced, VHOST_IOTLB_BATCH_BEGIN is a hint that a bathced IOTLB updating may be initiated from the userspace. VHOST_IOTLB_BATCH_END is a hint that userspace has finished the updating: VHOST_IOTLB_BATCH_BEGIN VHOST_IOTLB_UPDATE/VHOST_IOTLB_INVALIDATE ... VHOST_IOTLB_BATCH_END Vhost-vDPA can then know that all mappings has been set and can do optimization like passing all the mappings to the vDPA device driver. Signed-off-by: Jason Wang <jasowang@redhat.com> Message-Id: <20200907104903.31551-4-jasowang@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> --- include/hw/virtio/vhost-vdpa.h | 1 + hw/virtio/vhost-vdpa.c | 66 ++++++++++++++++++++++++++++++++++ 2 files changed, 67 insertions(+) diff --git a/include/hw/virtio/vhost-vdpa.h b/include/hw/virtio/vhost-vdpa.h index 6455663388..9b81a409da 100644 --- a/include/hw/virtio/vhost-vdpa.h +++ b/include/hw/virtio/vhost-vdpa.h @@ -18,6 +18,7 @@ typedef struct vhost_vdpa { int device_fd; uint32_t msg_type; MemoryListener listener; + struct vhost_dev *dev; } VhostVDPA; extern AddressSpace address_space_memory; diff --git a/hw/virtio/vhost-vdpa.c b/hw/virtio/vhost-vdpa.c index 4580f3efd8..ba1ae3ea44 100644 --- a/hw/virtio/vhost-vdpa.c +++ b/hw/virtio/vhost-vdpa.c @@ -78,6 +78,46 @@ static int vhost_vdpa_dma_unmap(struct vhost_vdpa *v, hwaddr iova, return ret; } +static void vhost_vdpa_listener_begin(MemoryListener *listener) +{ + struct vhost_vdpa *v = container_of(listener, struct vhost_vdpa, listener); + struct vhost_dev *dev = v->dev; + struct vhost_msg_v2 msg; + int fd = v->device_fd; + + if (!(dev->backend_cap & (0x1ULL << VHOST_BACKEND_F_IOTLB_BATCH))) { + return; + } + + msg.type = v->msg_type; + msg.iotlb.type = VHOST_IOTLB_BATCH_BEGIN; + + if (write(fd, &msg, sizeof(msg)) != sizeof(msg)) { + error_report("failed to write, fd=%d, errno=%d (%s)", + fd, errno, strerror(errno)); + } +} + +static void vhost_vdpa_listener_commit(MemoryListener *listener) +{ + struct vhost_vdpa *v = container_of(listener, struct vhost_vdpa, listener); + struct vhost_dev *dev = v->dev; + struct vhost_msg_v2 msg; + int fd = v->device_fd; + + if (!(dev->backend_cap & (0x1ULL << VHOST_BACKEND_F_IOTLB_BATCH))) { + return; + } + + msg.type = v->msg_type; + msg.iotlb.type = VHOST_IOTLB_BATCH_END; + + if (write(fd, &msg, sizeof(msg)) != sizeof(msg)) { + error_report("failed to write, fd=%d, errno=%d (%s)", + fd, errno, strerror(errno)); + } +} + static void vhost_vdpa_listener_region_add(MemoryListener *listener, MemoryRegionSection *section) { @@ -191,6 +231,8 @@ static void vhost_vdpa_listener_region_del(MemoryListener *listener, * depends on the addnop(). */ static const MemoryListener vhost_vdpa_memory_listener = { + .begin = vhost_vdpa_listener_begin, + .commit = vhost_vdpa_listener_commit, .region_add = vhost_vdpa_listener_region_add, .region_del = vhost_vdpa_listener_region_del, }; @@ -226,6 +268,7 @@ static int vhost_vdpa_init(struct vhost_dev *dev, void *opaque) assert(dev->vhost_ops->backend_type == VHOST_BACKEND_TYPE_VDPA); v = opaque; + v->dev = dev; dev->opaque = opaque ; vhost_vdpa_call(dev, VHOST_GET_FEATURES, &features); dev->backend_features = features; @@ -280,6 +323,28 @@ static int vhost_vdpa_set_features(struct vhost_dev *dev, return !(status & VIRTIO_CONFIG_S_FEATURES_OK); } +static int vhost_vdpa_set_backend_cap(struct vhost_dev *dev) +{ + uint64_t features; + uint64_t f = 0x1ULL << VHOST_BACKEND_F_IOTLB_MSG_V2 | + 0x1ULL << VHOST_BACKEND_F_IOTLB_BATCH; + int r; + + if (vhost_vdpa_call(dev, VHOST_GET_BACKEND_FEATURES, &features)) { + return 0; + } + + features &= f; + r = vhost_vdpa_call(dev, VHOST_SET_BACKEND_FEATURES, &features); + if (r) { + return 0; + } + + dev->backend_cap = features; + + return 0; +} + int vhost_vdpa_get_device_id(struct vhost_dev *dev, uint32_t *device_id) { @@ -452,6 +517,7 @@ const VhostOps vdpa_ops = { .vhost_set_vring_kick = vhost_vdpa_set_vring_kick, .vhost_set_vring_call = vhost_vdpa_set_vring_call, .vhost_get_features = vhost_vdpa_get_features, + .vhost_set_backend_cap = vhost_vdpa_set_backend_cap, .vhost_set_owner = vhost_vdpa_set_owner, .vhost_set_vring_endian = NULL, .vhost_backend_memslots_limit = vhost_vdpa_memslots_limit, -- MST
next prev parent reply other threads:[~2020-09-18 15:09 UTC|newest] Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-09-18 15:05 [PULL 00/15] virtio,pc,acpi: fixes, tests Michael S. Tsirkin 2020-09-18 15:05 ` [PULL 01/15] linux headers: sync to 5.9-rc4 Michael S. Tsirkin 2020-09-18 15:05 ` Michael S. Tsirkin [this message] 2020-09-18 15:06 ` [PULL 03/15] vhost-vdpa: batch updating IOTLB mappings Michael S. Tsirkin 2020-09-18 15:05 ` [PULL 04/15] virtio-mem: detach the element from the virtqueue when error occurs Michael S. Tsirkin 2020-09-18 15:06 ` [PULL 05/15] pc: fix auto_enable_numa_with_memhp/auto_enable_numa_with_memdev for the 5.0 machine Michael S. Tsirkin 2020-09-18 15:06 ` [PULL 06/15] vhost: recheck dev state in the vhost_migration_log routine Michael S. Tsirkin 2020-09-18 15:06 ` [PULL 07/15] vhost: check queue state in the vhost_dev_set_log routine Michael S. Tsirkin 2020-09-18 15:30 ` Raphael Norwitz 2020-09-18 15:06 ` [PULL 08/15] tests/qtest/vhost-user-test: prepare the tests for adding new dev class Michael S. Tsirkin 2020-09-18 15:06 ` [PULL 09/15] tests/qtest/libqos/virtio-blk: add support for vhost-user-blk Michael S. Tsirkin 2020-09-18 15:06 ` [PULL 10/15] tests/qtest/vhost-user-test: add support for the vhost-user-blk device Michael S. Tsirkin 2020-09-18 15:06 ` [PULL 11/15] tests/qtest/vhost-user-test: add migrate_reconnect test Michael S. Tsirkin 2020-09-18 15:06 ` [PULL 12/15] tests/qtest/vhost-user-test: enable the reconnect tests Michael S. Tsirkin 2020-09-18 15:06 ` [PULL 13/15] cphp: remove deprecated cpu-add command(s) Michael S. Tsirkin 2020-09-18 15:06 ` [PULL 14/15] virtio-iommu: Check gtrees are non null before destroying them Michael S. Tsirkin 2020-09-18 15:06 ` [PULL 15/15] virtio-iommu-pci: force virtio version 1 Michael S. Tsirkin 2020-09-18 15:10 ` [PULL 00/15] virtio,pc,acpi: fixes, tests Peter Maydell
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20200918150506.286890-4-mst@redhat.com \ --to=mst@redhat.com \ --cc=jasowang@redhat.com \ --cc=peter.maydell@linaro.org \ --cc=qemu-devel@nongnu.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).