From: Greg Kurz <groug@kaod.org>
To: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Cc: kwolf@redhat.com, berto@igalia.com, pavel.dovgaluk@ispras.ru,
qemu-block@nongnu.org, qemu-devel@nongnu.org, armbru@redhat.com,
stefanha@redhat.com, pbonzini@redhat.com, mreitz@redhat.com,
jsnow@redhat.com, ari@tuxera.com
Subject: Re: [PATCH v2 13/13] block/qed: bdrv_qed_do_open: deal with errp
Date: Fri, 18 Sep 2020 18:07:13 +0200 [thread overview]
Message-ID: <20200918180713.0c09e11d@bahia.lan> (raw)
In-Reply-To: <20200917195519.19589-14-vsementsov@virtuozzo.com>
On Thu, 17 Sep 2020 22:55:19 +0300
Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> wrote:
> Set errp always on failure. Generic bdrv_open_driver supports driver
> functions which can return negative value and forget to set errp.
> That's a strange thing.. Let's improve bdrv_qed_do_open to not behave
> this way. This allows to simplify code in
> bdrv_qed_co_invalidate_cache().
>
> Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
> Reviewed-by: Alberto Garcia <berto@igalia.com>
> ---
Reviewed-by: Greg Kurz <groug@kaod.org>
> block/qed.c | 24 +++++++++++++++---------
> 1 file changed, 15 insertions(+), 9 deletions(-)
>
> diff --git a/block/qed.c b/block/qed.c
> index b27e7546ca..f45c640513 100644
> --- a/block/qed.c
> +++ b/block/qed.c
> @@ -393,6 +393,7 @@ static int coroutine_fn bdrv_qed_do_open(BlockDriverState *bs, QDict *options,
>
> ret = bdrv_pread(bs->file, 0, &le_header, sizeof(le_header));
> if (ret < 0) {
> + error_setg(errp, "Failed to read QED header");
> return ret;
> }
> qed_header_le_to_cpu(&le_header, &s->header);
> @@ -408,25 +409,30 @@ static int coroutine_fn bdrv_qed_do_open(BlockDriverState *bs, QDict *options,
> return -ENOTSUP;
> }
> if (!qed_is_cluster_size_valid(s->header.cluster_size)) {
> + error_setg(errp, "QED cluster size is invalid");
> return -EINVAL;
> }
>
> /* Round down file size to the last cluster */
> file_size = bdrv_getlength(bs->file->bs);
> if (file_size < 0) {
> + error_setg(errp, "Failed to get file length");
> return file_size;
> }
> s->file_size = qed_start_of_cluster(s, file_size);
>
> if (!qed_is_table_size_valid(s->header.table_size)) {
> + error_setg(errp, "QED table size is invalid");
> return -EINVAL;
> }
> if (!qed_is_image_size_valid(s->header.image_size,
> s->header.cluster_size,
> s->header.table_size)) {
> + error_setg(errp, "QED image size is invalid");
> return -EINVAL;
> }
> if (!qed_check_table_offset(s, s->header.l1_table_offset)) {
> + error_setg(errp, "QED table offset is invalid");
> return -EINVAL;
> }
>
> @@ -438,6 +444,7 @@ static int coroutine_fn bdrv_qed_do_open(BlockDriverState *bs, QDict *options,
>
> /* Header size calculation must not overflow uint32_t */
> if (s->header.header_size > UINT32_MAX / s->header.cluster_size) {
> + error_setg(errp, "QED header size is too large");
> return -EINVAL;
> }
>
> @@ -445,6 +452,7 @@ static int coroutine_fn bdrv_qed_do_open(BlockDriverState *bs, QDict *options,
> if ((uint64_t)s->header.backing_filename_offset +
> s->header.backing_filename_size >
> s->header.cluster_size * s->header.header_size) {
> + error_setg(errp, "QED backing filename offset is invalid");
> return -EINVAL;
> }
>
> @@ -453,6 +461,7 @@ static int coroutine_fn bdrv_qed_do_open(BlockDriverState *bs, QDict *options,
> bs->auto_backing_file,
> sizeof(bs->auto_backing_file));
> if (ret < 0) {
> + error_setg(errp, "Failed to read backing filename");
> return ret;
> }
> pstrcpy(bs->backing_file, sizeof(bs->backing_file),
> @@ -475,6 +484,7 @@ static int coroutine_fn bdrv_qed_do_open(BlockDriverState *bs, QDict *options,
>
> ret = qed_write_header_sync(s);
> if (ret) {
> + error_setg(errp, "Failed to update header");
> return ret;
> }
>
> @@ -487,6 +497,7 @@ static int coroutine_fn bdrv_qed_do_open(BlockDriverState *bs, QDict *options,
>
> ret = qed_read_l1_table_sync(s);
> if (ret) {
> + error_setg(errp, "Failed to read L1 table");
> goto out;
> }
>
> @@ -503,6 +514,7 @@ static int coroutine_fn bdrv_qed_do_open(BlockDriverState *bs, QDict *options,
>
> ret = qed_check(s, &result, true);
> if (ret) {
> + error_setg(errp, "Image corrupted");
> goto out;
> }
> }
> @@ -1537,22 +1549,16 @@ static void coroutine_fn bdrv_qed_co_invalidate_cache(BlockDriverState *bs,
> Error **errp)
> {
> BDRVQEDState *s = bs->opaque;
> - Error *local_err = NULL;
> int ret;
>
> bdrv_qed_close(bs);
>
> bdrv_qed_init_state(bs);
> qemu_co_mutex_lock(&s->table_lock);
> - ret = bdrv_qed_do_open(bs, NULL, bs->open_flags, &local_err);
> + ret = bdrv_qed_do_open(bs, NULL, bs->open_flags, errp);
> qemu_co_mutex_unlock(&s->table_lock);
> - if (local_err) {
> - error_propagate_prepend(errp, local_err,
> - "Could not reopen qed layer: ");
> - return;
> - } else if (ret < 0) {
> - error_setg_errno(errp, -ret, "Could not reopen qed layer");
> - return;
> + if (ret < 0) {
> + error_prepend(errp, "Could not reopen qed layer: ");
> }
> }
>
next prev parent reply other threads:[~2020-09-18 16:25 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-09-17 19:55 [PATCH v2 00/13] block: deal with errp: part I Vladimir Sementsov-Ogievskiy
2020-09-17 19:55 ` [PATCH v2 01/13] block: return status from bdrv_append and friends Vladimir Sementsov-Ogievskiy
2020-09-17 19:55 ` [PATCH v2 02/13] block: use return status of bdrv_append() Vladimir Sementsov-Ogievskiy
2020-09-17 19:55 ` [PATCH v2 03/13] block: check return value of bdrv_open_child and drop error propagation Vladimir Sementsov-Ogievskiy
2020-09-17 19:55 ` [PATCH v2 04/13] blockdev: fix drive_backup_prepare() missed error Vladimir Sementsov-Ogievskiy
2020-09-17 19:55 ` [PATCH v2 05/13] block: drop extra error propagation for bdrv_set_backing_hd Vladimir Sementsov-Ogievskiy
2020-09-17 19:55 ` [PATCH v2 06/13] block/mirror: drop extra error propagation in commit_active_start() Vladimir Sementsov-Ogievskiy
2020-09-17 19:55 ` [PATCH v2 07/13] blockjob: return status from block_job_set_speed() Vladimir Sementsov-Ogievskiy
2020-09-17 19:55 ` [PATCH v2 08/13] block/qcow2: qcow2_get_specific_info(): drop error propagation Vladimir Sementsov-Ogievskiy
2020-09-18 15:04 ` Alberto Garcia
2020-09-17 19:55 ` [PATCH v2 09/13] block/qcow2-bitmap: improve qcow2_load_dirty_bitmaps() interface Vladimir Sementsov-Ogievskiy
2020-09-18 14:54 ` Alberto Garcia
2020-09-18 14:59 ` Vladimir Sementsov-Ogievskiy
2020-09-18 15:15 ` Greg Kurz
2020-09-17 19:55 ` [PATCH v2 10/13] block/qcow2-bitmap: return status from qcow2_store_persistent_dirty_bitmaps Vladimir Sementsov-Ogievskiy
2020-09-18 15:21 ` Alberto Garcia
2020-09-17 19:55 ` [PATCH v2 11/13] block/qcow2: read_cache_sizes: return status value Vladimir Sementsov-Ogievskiy
2020-09-17 19:55 ` [PATCH v2 12/13] block/qcow2: simplify qcow2_co_invalidate_cache() Vladimir Sementsov-Ogievskiy
2020-09-18 15:26 ` Alberto Garcia
2020-09-18 15:30 ` Greg Kurz
2020-09-18 15:51 ` Alberto Garcia
2020-09-18 16:01 ` Vladimir Sementsov-Ogievskiy
2020-09-18 16:10 ` Greg Kurz
2020-09-17 19:55 ` [PATCH v2 13/13] block/qed: bdrv_qed_do_open: deal with errp Vladimir Sementsov-Ogievskiy
2020-09-18 16:07 ` Greg Kurz [this message]
2020-09-17 20:15 ` [PATCH v2 00/13] block: deal with errp: part I no-reply
2020-09-18 12:27 ` Vladimir Sementsov-Ogievskiy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200918180713.0c09e11d@bahia.lan \
--to=groug@kaod.org \
--cc=ari@tuxera.com \
--cc=armbru@redhat.com \
--cc=berto@igalia.com \
--cc=jsnow@redhat.com \
--cc=kwolf@redhat.com \
--cc=mreitz@redhat.com \
--cc=pavel.dovgaluk@ispras.ru \
--cc=pbonzini@redhat.com \
--cc=qemu-block@nongnu.org \
--cc=qemu-devel@nongnu.org \
--cc=stefanha@redhat.com \
--cc=vsementsov@virtuozzo.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).