* [PULL 01/11] capstone: Convert Makefile bits to meson bits
2020-09-22 17:47 [PULL 00/11] capstone + disassembler patch queue Richard Henderson
@ 2020-09-22 17:47 ` Richard Henderson
2020-09-22 17:47 ` [PULL 02/11] capstone: Update to upstream "next" branch Richard Henderson
` (11 subsequent siblings)
12 siblings, 0 replies; 16+ messages in thread
From: Richard Henderson @ 2020-09-22 17:47 UTC (permalink / raw)
To: qemu-devel; +Cc: peter.maydell, Alex Bennée, Paolo Bonzini
There are better ways to do this, e.g. meson cmake subproject,
but that requires cmake 3.7 and some of our CI environments
only provide cmake 3.5.
Nor can we add a meson.build file to capstone/, because the git
submodule would then always report "untracked files". Fixing that
would require creating our own branch on the qemu git mirror, at
which point we could just as easily create a native meson subproject.
Instead, build the library via the main meson.build.
This improves the current state of affairs in that we will re-link
the qemu executables against a changed libcapstone.a, which we wouldn't
do before-hand. In addition, the use of the configuration header file
instead of command-line -DEFINES means that we will rebuild the
capstone objects with changes to meson.build.
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
configure | 64 +++-----------------------
Makefile | 16 -------
meson.build | 111 +++++++++++++++++++++++++++++++++++++++++++---
meson_options.txt | 4 ++
4 files changed, 115 insertions(+), 80 deletions(-)
diff --git a/configure b/configure
index e8e8e984f2..a82b16a60a 100755
--- a/configure
+++ b/configure
@@ -478,7 +478,7 @@ opengl=""
opengl_dmabuf="no"
cpuid_h="no"
avx2_opt=""
-capstone=""
+capstone="auto"
lzo=""
snappy=""
bzip2=""
@@ -1580,7 +1580,7 @@ for opt do
;;
--enable-capstone) capstone="yes"
;;
- --enable-capstone=git) capstone="git"
+ --enable-capstone=git) capstone="internal"
;;
--enable-capstone=system) capstone="system"
;;
@@ -5128,51 +5128,11 @@ fi
# capstone
case "$capstone" in
- "" | yes)
- if $pkg_config capstone; then
- capstone=system
- elif test -e "${source_path}/.git" && test $git_update = 'yes' ; then
- capstone=git
- elif test -e "${source_path}/capstone/Makefile" ; then
- capstone=internal
- elif test -z "$capstone" ; then
- capstone=no
- else
- feature_not_found "capstone" "Install capstone devel or git submodule"
- fi
- ;;
-
- system)
- if ! $pkg_config capstone; then
- feature_not_found "capstone" "Install capstone devel"
- fi
- ;;
-esac
-
-case "$capstone" in
- git | internal)
- if test "$capstone" = git; then
+ auto | yes | internal)
+ # Simpler to always update submodule, even if not needed.
+ if test -e "${source_path}/.git" && test $git_update = 'yes' ; then
git_submodules="${git_submodules} capstone"
fi
- mkdir -p capstone
- if test "$mingw32" = "yes"; then
- LIBCAPSTONE=capstone.lib
- else
- LIBCAPSTONE=libcapstone.a
- fi
- capstone_libs="-Lcapstone -lcapstone"
- capstone_cflags="-I${source_path}/capstone/include"
- ;;
-
- system)
- capstone_libs="$($pkg_config --libs capstone)"
- capstone_cflags="$($pkg_config --cflags capstone)"
- ;;
-
- no)
- ;;
- *)
- error_exit "Unknown state for capstone: $capstone"
;;
esac
@@ -7292,11 +7252,6 @@ fi
if test "$ivshmem" = "yes" ; then
echo "CONFIG_IVSHMEM=y" >> $config_host_mak
fi
-if test "$capstone" != "no" ; then
- echo "CONFIG_CAPSTONE=y" >> $config_host_mak
- echo "CAPSTONE_CFLAGS=$capstone_cflags" >> $config_host_mak
- echo "CAPSTONE_LIBS=$capstone_libs" >> $config_host_mak
-fi
if test "$debug_mutex" = "yes" ; then
echo "CONFIG_DEBUG_MUTEX=y" >> $config_host_mak
fi
@@ -7819,13 +7774,7 @@ done # for target in $targets
if [ "$fdt" = "git" ]; then
subdirs="$subdirs dtc"
fi
-if [ "$capstone" = "git" -o "$capstone" = "internal" ]; then
- subdirs="$subdirs capstone"
-fi
echo "SUBDIRS=$subdirs" >> $config_host_mak
-if test -n "$LIBCAPSTONE"; then
- echo "LIBCAPSTONE=$LIBCAPSTONE" >> $config_host_mak
-fi
if test "$numa" = "yes"; then
echo "CONFIG_NUMA=y" >> $config_host_mak
@@ -8008,7 +7957,8 @@ NINJA=${ninja:-$PWD/ninjatool} $meson setup \
-Db_coverage=$(if test "$gcov" = yes; then echo true; else echo false; fi) \
-Dsdl=$sdl -Dsdl_image=$sdl_image \
-Dvnc=$vnc -Dvnc_sasl=$vnc_sasl -Dvnc_jpeg=$vnc_jpeg -Dvnc_png=$vnc_png \
- -Dgettext=$gettext -Dxkbcommon=$xkbcommon -Du2f=$u2f\
+ -Dgettext=$gettext -Dxkbcommon=$xkbcommon -Du2f=$u2f \
+ -Dcapstone=$capstone \
$cross_arg \
"$PWD" "$source_path"
diff --git a/Makefile b/Makefile
index 7c60b9dcb8..f3da1760ad 100644
--- a/Makefile
+++ b/Makefile
@@ -156,22 +156,6 @@ dtc/all: .git-submodule-status dtc/libfdt
dtc/%: .git-submodule-status
@mkdir -p $@
-# Overriding CFLAGS causes us to lose defines added in the sub-makefile.
-# Not overriding CFLAGS leads to mis-matches between compilation modes.
-# Therefore we replicate some of the logic in the sub-makefile.
-# Remove all the extra -Warning flags that QEMU uses that Capstone doesn't;
-# no need to annoy QEMU developers with such things.
-CAP_CFLAGS = $(patsubst -W%,,$(CFLAGS) $(QEMU_CFLAGS)) $(CAPSTONE_CFLAGS)
-CAP_CFLAGS += -DCAPSTONE_USE_SYS_DYN_MEM
-CAP_CFLAGS += -DCAPSTONE_HAS_ARM
-CAP_CFLAGS += -DCAPSTONE_HAS_ARM64
-CAP_CFLAGS += -DCAPSTONE_HAS_POWERPC
-CAP_CFLAGS += -DCAPSTONE_HAS_X86
-
-.PHONY: capstone/all
-capstone/all: .git-submodule-status
- $(call quiet-command,$(MAKE) -C $(SRC_PATH)/capstone CAPSTONE_SHARED=no BUILDDIR="$(BUILD_DIR)/capstone" CC="$(CC)" AR="$(AR)" LD="$(LD)" RANLIB="$(RANLIB)" CFLAGS="$(CAP_CFLAGS)" $(SUBDIR_MAKEFLAGS) $(BUILD_DIR)/capstone/$(LIBCAPSTONE))
-
.PHONY: slirp/all
slirp/all: .git-submodule-status
$(call quiet-command,$(MAKE) -C $(SRC_PATH)/slirp \
diff --git a/meson.build b/meson.build
index f4d1ab1096..f23273693d 100644
--- a/meson.build
+++ b/meson.build
@@ -10,6 +10,7 @@ else
keyval = import('unstable-keyval')
endif
ss = import('sourceset')
+fs = import('fs')
sh = find_program('sh')
cc = meson.get_compiler('c')
@@ -409,11 +410,6 @@ if 'CONFIG_USB_LIBUSB' in config_host
libusb = declare_dependency(compile_args: config_host['LIBUSB_CFLAGS'].split(),
link_args: config_host['LIBUSB_LIBS'].split())
endif
-capstone = not_found
-if 'CONFIG_CAPSTONE' in config_host
- capstone = declare_dependency(compile_args: config_host['CAPSTONE_CFLAGS'].split(),
- link_args: config_host['CAPSTONE_LIBS'].split())
-endif
libpmem = not_found
if 'CONFIG_LIBPMEM' in config_host
libpmem = declare_dependency(compile_args: config_host['LIBPMEM_CFLAGS'].split(),
@@ -470,7 +466,6 @@ foreach k, v: config_host
config_host_data.set(k, v == 'y' ? 1 : v)
endif
endforeach
-genh += configure_file(output: 'config-host.h', configuration: config_host_data)
minikconf = find_program('scripts/minikconf.py')
config_all_devices = {}
@@ -610,6 +605,108 @@ config_all += {
'CONFIG_ALL': true,
}
+# Submodules
+
+capstone = not_found
+capstone_opt = get_option('capstone')
+if capstone_opt == 'no'
+ capstone_opt = false
+elif capstone_opt in ['yes', 'auto', 'system']
+ have_internal = fs.exists('capstone/Makefile')
+ capstone = dependency('capstone', static: enable_static,
+ required: capstone_opt == 'system' or
+ capstone_opt == 'yes' and not have_internal)
+ if capstone.found()
+ capstone_opt = 'system'
+ elif have_internal
+ capstone_opt = 'internal'
+ else
+ capstone_opt = false
+ endif
+endif
+if capstone_opt == 'internal'
+ capstone_data = configuration_data()
+ capstone_data.set('CAPSTONE_USE_SYS_DYN_MEM', '1')
+
+ capstone_files = files(
+ 'capstone/cs.c',
+ 'capstone/MCInst.c',
+ 'capstone/MCInstrDesc.c',
+ 'capstone/MCRegisterInfo.c',
+ 'capstone/SStream.c',
+ 'capstone/utils.c'
+ )
+
+ if 'CONFIG_ARM_DIS' in config_all_disas
+ capstone_data.set('CAPSTONE_HAS_ARM', '1')
+ capstone_files += files(
+ 'capstone/arch/ARM/ARMDisassembler.c',
+ 'capstone/arch/ARM/ARMInstPrinter.c',
+ 'capstone/arch/ARM/ARMMapping.c',
+ 'capstone/arch/ARM/ARMModule.c'
+ )
+ endif
+
+ # FIXME: This config entry currently depends on a c++ compiler.
+ # Which is needed for building libvixl, but not for capstone.
+ if 'CONFIG_ARM_A64_DIS' in config_all_disas
+ capstone_data.set('CAPSTONE_HAS_ARM64', '1')
+ capstone_files += files(
+ 'capstone/arch/AArch64/AArch64BaseInfo.c',
+ 'capstone/arch/AArch64/AArch64Disassembler.c',
+ 'capstone/arch/AArch64/AArch64InstPrinter.c',
+ 'capstone/arch/AArch64/AArch64Mapping.c',
+ 'capstone/arch/AArch64/AArch64Module.c'
+ )
+ endif
+
+ if 'CONFIG_PPC_DIS' in config_all_disas
+ capstone_data.set('CAPSTONE_HAS_POWERPC', '1')
+ capstone_files += files(
+ 'capstone/arch/PowerPC/PPCDisassembler.c',
+ 'capstone/arch/PowerPC/PPCInstPrinter.c',
+ 'capstone/arch/PowerPC/PPCMapping.c',
+ 'capstone/arch/PowerPC/PPCModule.c'
+ )
+ endif
+
+ if 'CONFIG_I386_DIS' in config_all_disas
+ capstone_data.set('CAPSTONE_HAS_X86', 1)
+ capstone_files += files(
+ 'capstone/arch/X86/X86Disassembler.c',
+ 'capstone/arch/X86/X86DisassemblerDecoder.c',
+ 'capstone/arch/X86/X86ATTInstPrinter.c',
+ 'capstone/arch/X86/X86IntelInstPrinter.c',
+ 'capstone/arch/X86/X86Mapping.c',
+ 'capstone/arch/X86/X86Module.c'
+ )
+ endif
+
+ configure_file(output: 'capstone-defs.h', configuration: capstone_data)
+
+ capstone_cargs = [
+ # FIXME: There does not seem to be a way to completely replace the c_args
+ # that come from add_project_arguments() -- we can only add to them.
+ # So: disable all warnings with a big hammer.
+ '-Wno-error', '-w',
+
+ # Include all configuration defines via a header file, which will wind up
+ # as a dependency on the object file, and thus changes here will result
+ # in a rebuild.
+ '-include', 'capstone-defs.h'
+ ]
+
+ libcapstone = static_library('capstone',
+ sources: capstone_files,
+ c_args: capstone_cargs,
+ include_directories: 'capstone/include')
+ capstone = declare_dependency(link_with: libcapstone,
+ include_directories: 'capstone/include')
+endif
+config_host_data.set('CONFIG_CAPSTONE', capstone.found())
+
+genh += configure_file(output: 'config-host.h', configuration: config_host_data)
+
# Generators
hxtool = find_program('scripts/hxtool')
@@ -1512,7 +1609,7 @@ summary_info += {'vvfat support': config_host.has_key('CONFIG_VVFAT')}
summary_info += {'qed support': config_host.has_key('CONFIG_QED')}
summary_info += {'parallels support': config_host.has_key('CONFIG_PARALLELS')}
summary_info += {'sheepdog support': config_host.has_key('CONFIG_SHEEPDOG')}
-summary_info += {'capstone': config_host.has_key('CONFIG_CAPSTONE')}
+summary_info += {'capstone': capstone_opt}
summary_info += {'libpmem support': config_host.has_key('CONFIG_LIBPMEM')}
summary_info += {'libdaxctl support': config_host.has_key('CONFIG_LIBDAXCTL')}
summary_info += {'libudev': config_host.has_key('CONFIG_LIBUDEV')}
diff --git a/meson_options.txt b/meson_options.txt
index 543cf70043..e650a937e7 100644
--- a/meson_options.txt
+++ b/meson_options.txt
@@ -22,3 +22,7 @@ option('vnc_sasl', type : 'feature', value : 'auto',
description: 'SASL authentication for VNC server')
option('xkbcommon', type : 'feature', value : 'auto',
description: 'xkbcommon support')
+
+option('capstone', type: 'combo', value: 'auto',
+ choices: ['no', 'yes', 'auto', 'system', 'internal'],
+ description: 'Whether and how to find the capstone library')
--
2.25.1
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PULL 02/11] capstone: Update to upstream "next" branch
2020-09-22 17:47 [PULL 00/11] capstone + disassembler patch queue Richard Henderson
2020-09-22 17:47 ` [PULL 01/11] capstone: Convert Makefile bits to meson bits Richard Henderson
@ 2020-09-22 17:47 ` Richard Henderson
2020-09-22 17:47 ` [PULL 03/11] capstone: Require version 4.0 from a system library Richard Henderson
` (10 subsequent siblings)
12 siblings, 0 replies; 16+ messages in thread
From: Richard Henderson @ 2020-09-22 17:47 UTC (permalink / raw)
To: qemu-devel; +Cc: peter.maydell, Alex Bennée, Philippe Mathieu-Daudé
This branch contains a number of improvements over master,
including making all of the disassembler data constant.
We are skipping past the 4.0 branchpoint, which changed
the location of the includes within the source directory.
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
meson.build | 3 ++-
capstone | 2 +-
2 files changed, 3 insertions(+), 2 deletions(-)
diff --git a/meson.build b/meson.build
index f23273693d..4c92b43fe5 100644
--- a/meson.build
+++ b/meson.build
@@ -677,6 +677,7 @@ if capstone_opt == 'internal'
'capstone/arch/X86/X86DisassemblerDecoder.c',
'capstone/arch/X86/X86ATTInstPrinter.c',
'capstone/arch/X86/X86IntelInstPrinter.c',
+ 'capstone/arch/X86/X86InstPrinterCommon.c',
'capstone/arch/X86/X86Mapping.c',
'capstone/arch/X86/X86Module.c'
)
@@ -701,7 +702,7 @@ if capstone_opt == 'internal'
c_args: capstone_cargs,
include_directories: 'capstone/include')
capstone = declare_dependency(link_with: libcapstone,
- include_directories: 'capstone/include')
+ include_directories: 'capstone/include/capstone')
endif
config_host_data.set('CONFIG_CAPSTONE', capstone.found())
diff --git a/capstone b/capstone
index 22ead3e0bf..f8b1b83301 160000
--- a/capstone
+++ b/capstone
@@ -1 +1 @@
-Subproject commit 22ead3e0bfdb87516656453336160e0a37b066bf
+Subproject commit f8b1b833015a4ae47110ed068e0deb7106ced66d
--
2.25.1
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PULL 03/11] capstone: Require version 4.0 from a system library
2020-09-22 17:47 [PULL 00/11] capstone + disassembler patch queue Richard Henderson
2020-09-22 17:47 ` [PULL 01/11] capstone: Convert Makefile bits to meson bits Richard Henderson
2020-09-22 17:47 ` [PULL 02/11] capstone: Update to upstream "next" branch Richard Henderson
@ 2020-09-22 17:47 ` Richard Henderson
2020-09-22 17:47 ` [PULL 04/11] disas: Move host asm annotations to tb_gen_code Richard Henderson
` (9 subsequent siblings)
12 siblings, 0 replies; 16+ messages in thread
From: Richard Henderson @ 2020-09-22 17:47 UTC (permalink / raw)
To: qemu-devel; +Cc: peter.maydell, Alex Bennée, Philippe Mathieu-Daudé
We're about to use a portion of the 4.0 API.
Reject a system library version prior to that.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
meson.build | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/meson.build b/meson.build
index 4c92b43fe5..114b136129 100644
--- a/meson.build
+++ b/meson.build
@@ -613,7 +613,7 @@ if capstone_opt == 'no'
capstone_opt = false
elif capstone_opt in ['yes', 'auto', 'system']
have_internal = fs.exists('capstone/Makefile')
- capstone = dependency('capstone', static: enable_static,
+ capstone = dependency('capstone', version: '>=4.0', static: enable_static,
required: capstone_opt == 'system' or
capstone_opt == 'yes' and not have_internal)
if capstone.found()
--
2.25.1
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PULL 04/11] disas: Move host asm annotations to tb_gen_code
2020-09-22 17:47 [PULL 00/11] capstone + disassembler patch queue Richard Henderson
` (2 preceding siblings ...)
2020-09-22 17:47 ` [PULL 03/11] capstone: Require version 4.0 from a system library Richard Henderson
@ 2020-09-22 17:47 ` Richard Henderson
2020-09-22 17:47 ` [PULL 05/11] disas: Clean up CPUDebug initialization Richard Henderson
` (8 subsequent siblings)
12 siblings, 0 replies; 16+ messages in thread
From: Richard Henderson @ 2020-09-22 17:47 UTC (permalink / raw)
To: qemu-devel; +Cc: peter.maydell, Thomas Huth, Alex Bennée
Instead of creating GStrings and passing them into log_disas,
just print the annotations directly in tb_gen_code.
Fix the annotations for the slow paths of the TB, after the
part implementing the final guest instruction.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
include/disas/disas.h | 2 +-
include/exec/log.h | 4 ++--
accel/tcg/translate-all.c | 24 +++++++++++++++---------
disas.c | 29 +++++++++--------------------
tcg/tcg.c | 4 ++--
5 files changed, 29 insertions(+), 34 deletions(-)
diff --git a/include/disas/disas.h b/include/disas/disas.h
index 1b6e035e32..36c33f6f19 100644
--- a/include/disas/disas.h
+++ b/include/disas/disas.h
@@ -7,7 +7,7 @@
#include "cpu.h"
/* Disassemble this for me please... (debugging). */
-void disas(FILE *out, void *code, unsigned long size, const char *note);
+void disas(FILE *out, void *code, unsigned long size);
void target_disas(FILE *out, CPUState *cpu, target_ulong code,
target_ulong size);
diff --git a/include/exec/log.h b/include/exec/log.h
index 3ed797c1c8..fcc7b9e00b 100644
--- a/include/exec/log.h
+++ b/include/exec/log.h
@@ -56,13 +56,13 @@ static inline void log_target_disas(CPUState *cpu, target_ulong start,
rcu_read_unlock();
}
-static inline void log_disas(void *code, unsigned long size, const char *note)
+static inline void log_disas(void *code, unsigned long size)
{
QemuLogFile *logfile;
rcu_read_lock();
logfile = atomic_rcu_read(&qemu_logfile);
if (logfile) {
- disas(logfile->fd, code, size, note);
+ disas(logfile->fd, code, size);
}
rcu_read_unlock();
}
diff --git a/accel/tcg/translate-all.c b/accel/tcg/translate-all.c
index 2d83013633..2874104a6a 100644
--- a/accel/tcg/translate-all.c
+++ b/accel/tcg/translate-all.c
@@ -1815,10 +1815,9 @@ TranslationBlock *tb_gen_code(CPUState *cpu,
qemu_log_in_addr_range(tb->pc)) {
FILE *logfile = qemu_log_lock();
int code_size, data_size = 0;
- g_autoptr(GString) note = g_string_new("[tb header & initial instruction]");
- size_t chunk_start = 0;
+ size_t chunk_start;
int insn = 0;
- qemu_log("OUT: [size=%d]\n", gen_code_size);
+
if (tcg_ctx->data_gen_ptr) {
code_size = tcg_ctx->data_gen_ptr - tb->tc.ptr;
data_size = gen_code_size - code_size;
@@ -1827,26 +1826,33 @@ TranslationBlock *tb_gen_code(CPUState *cpu,
}
/* Dump header and the first instruction */
+ qemu_log("OUT: [size=%d]\n", gen_code_size);
+ qemu_log(" -- guest addr 0x" TARGET_FMT_lx " + tb prologue\n",
+ tcg_ctx->gen_insn_data[insn][0]);
chunk_start = tcg_ctx->gen_insn_end_off[insn];
- log_disas(tb->tc.ptr, chunk_start, note->str);
+ log_disas(tb->tc.ptr, chunk_start);
/*
* Dump each instruction chunk, wrapping up empty chunks into
* the next instruction. The whole array is offset so the
* first entry is the beginning of the 2nd instruction.
*/
- while (insn <= tb->icount && chunk_start < code_size) {
+ while (insn < tb->icount) {
size_t chunk_end = tcg_ctx->gen_insn_end_off[insn];
if (chunk_end > chunk_start) {
- g_string_printf(note, "[guest addr: " TARGET_FMT_lx "]",
- tcg_ctx->gen_insn_data[insn][0]);
- log_disas(tb->tc.ptr + chunk_start, chunk_end - chunk_start,
- note->str);
+ qemu_log(" -- guest addr 0x" TARGET_FMT_lx "\n",
+ tcg_ctx->gen_insn_data[insn][0]);
+ log_disas(tb->tc.ptr + chunk_start, chunk_end - chunk_start);
chunk_start = chunk_end;
}
insn++;
}
+ if (chunk_start < code_size) {
+ qemu_log(" -- tb slow paths + alignment\n");
+ log_disas(tb->tc.ptr + chunk_start, code_size - chunk_start);
+ }
+
/* Finally dump any data we may have after the block */
if (data_size) {
int i;
diff --git a/disas.c b/disas.c
index c1397d3933..a4304e8137 100644
--- a/disas.c
+++ b/disas.c
@@ -262,8 +262,7 @@ static void cap_dump_insn_units(disassemble_info *info, cs_insn *insn,
}
}
-static void cap_dump_insn(disassemble_info *info, cs_insn *insn,
- const char *note)
+static void cap_dump_insn(disassemble_info *info, cs_insn *insn)
{
fprintf_function print = info->fprintf_func;
int i, n, split;
@@ -284,11 +283,7 @@ static void cap_dump_insn(disassemble_info *info, cs_insn *insn,
}
/* Print the actual instruction. */
- print(info->stream, " %-8s %s", insn->mnemonic, insn->op_str);
- if (note) {
- print(info->stream, "\t\t%s", note);
- }
- print(info->stream, "\n");
+ print(info->stream, " %-8s %s\n", insn->mnemonic, insn->op_str);
/* Dump any remaining part of the insn on subsequent lines. */
for (i = split; i < n; i += split) {
@@ -320,7 +315,7 @@ static bool cap_disas_target(disassemble_info *info, uint64_t pc, size_t size)
size -= tsize;
while (cs_disasm_iter(handle, &cbuf, &csize, &pc, insn)) {
- cap_dump_insn(info, insn, NULL);
+ cap_dump_insn(info, insn);
}
/* If the target memory is not consumed, go back for more... */
@@ -349,8 +344,7 @@ static bool cap_disas_target(disassemble_info *info, uint64_t pc, size_t size)
}
/* Disassemble SIZE bytes at CODE for the host. */
-static bool cap_disas_host(disassemble_info *info, void *code, size_t size,
- const char *note)
+static bool cap_disas_host(disassemble_info *info, void *code, size_t size)
{
csh handle;
const uint8_t *cbuf;
@@ -366,8 +360,7 @@ static bool cap_disas_host(disassemble_info *info, void *code, size_t size,
pc = (uintptr_t)code;
while (cs_disasm_iter(handle, &cbuf, &size, &pc, insn)) {
- cap_dump_insn(info, insn, note);
- note = NULL;
+ cap_dump_insn(info, insn);
}
if (size != 0) {
(*info->fprintf_func)(info->stream,
@@ -411,7 +404,7 @@ static bool cap_disas_monitor(disassemble_info *info, uint64_t pc, int count)
csize += tsize;
if (cs_disasm_iter(handle, &cbuf, &csize, &pc, insn)) {
- cap_dump_insn(info, insn, NULL);
+ cap_dump_insn(info, insn);
if (--count <= 0) {
break;
}
@@ -425,7 +418,7 @@ static bool cap_disas_monitor(disassemble_info *info, uint64_t pc, int count)
#endif /* !CONFIG_USER_ONLY */
#else
# define cap_disas_target(i, p, s) false
-# define cap_disas_host(i, p, s, n) false
+# define cap_disas_host(i, p, s) false
# define cap_disas_monitor(i, p, c) false
# define cap_disas_plugin(i, p, c) false
#endif /* CONFIG_CAPSTONE */
@@ -595,7 +588,7 @@ char *plugin_disas(CPUState *cpu, uint64_t addr, size_t size)
}
/* Disassemble this for me please... (debugging). */
-void disas(FILE *out, void *code, unsigned long size, const char *note)
+void disas(FILE *out, void *code, unsigned long size)
{
uintptr_t pc;
int count;
@@ -673,7 +666,7 @@ void disas(FILE *out, void *code, unsigned long size, const char *note)
print_insn = print_insn_hppa;
#endif
- if (s.info.cap_arch >= 0 && cap_disas_host(&s.info, code, size, note)) {
+ if (s.info.cap_arch >= 0 && cap_disas_host(&s.info, code, size)) {
return;
}
@@ -683,10 +676,6 @@ void disas(FILE *out, void *code, unsigned long size, const char *note)
for (pc = (uintptr_t)code; size > 0; pc += count, size -= count) {
fprintf(out, "0x%08" PRIxPTR ": ", pc);
count = print_insn(pc, &s.info);
- if (note) {
- fprintf(out, "\t\t%s", note);
- note = NULL;
- }
fprintf(out, "\n");
if (count < 0) {
break;
diff --git a/tcg/tcg.c b/tcg/tcg.c
index 62f299e36e..9a111ce604 100644
--- a/tcg/tcg.c
+++ b/tcg/tcg.c
@@ -1101,7 +1101,7 @@ void tcg_prologue_init(TCGContext *s)
size_t data_size = prologue_size - code_size;
size_t i;
- log_disas(buf0, code_size, NULL);
+ log_disas(buf0, code_size);
for (i = 0; i < data_size; i += sizeof(tcg_target_ulong)) {
if (sizeof(tcg_target_ulong) == 8) {
@@ -1115,7 +1115,7 @@ void tcg_prologue_init(TCGContext *s)
}
}
} else {
- log_disas(buf0, prologue_size, NULL);
+ log_disas(buf0, prologue_size);
}
qemu_log("\n");
qemu_log_flush();
--
2.25.1
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PULL 05/11] disas: Clean up CPUDebug initialization
2020-09-22 17:47 [PULL 00/11] capstone + disassembler patch queue Richard Henderson
` (3 preceding siblings ...)
2020-09-22 17:47 ` [PULL 04/11] disas: Move host asm annotations to tb_gen_code Richard Henderson
@ 2020-09-22 17:47 ` Richard Henderson
2020-09-22 17:47 ` [PULL 06/11] disas: Use qemu/bswap.h for bfd endian loads Richard Henderson
` (7 subsequent siblings)
12 siblings, 0 replies; 16+ messages in thread
From: Richard Henderson @ 2020-09-22 17:47 UTC (permalink / raw)
To: qemu-devel; +Cc: peter.maydell, Thomas Huth, Alex Bennée
Rename several functions, dropping "generic" and making "host"
vs "target" clearer. Make a bunch of functions static that are
not used outside this file. Replace INIT_DISASSEMBLE_INFO with
a trio of functions.
Acked-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
include/disas/dis-asm.h | 62 --------
disas.c | 330 ++++++++++++++++++----------------------
2 files changed, 151 insertions(+), 241 deletions(-)
diff --git a/include/disas/dis-asm.h b/include/disas/dis-asm.h
index 9856bf7921..dda247eaf2 100644
--- a/include/disas/dis-asm.h
+++ b/include/disas/dis-asm.h
@@ -406,7 +406,6 @@ typedef struct disassemble_info {
} disassemble_info;
-\f
/* Standard disassemblers. Disassemble one instruction at the given
target address. Return number of bytes processed. */
typedef int (*disassembler_ftype) (bfd_vma, disassemble_info *);
@@ -461,67 +460,6 @@ int print_insn_riscv32 (bfd_vma, disassemble_info*);
int print_insn_riscv64 (bfd_vma, disassemble_info*);
int print_insn_rx(bfd_vma, disassemble_info *);
-#if 0
-/* Fetch the disassembler for a given BFD, if that support is available. */
-disassembler_ftype disassembler(bfd *);
-#endif
-
-\f
-/* This block of definitions is for particular callers who read instructions
- into a buffer before calling the instruction decoder. */
-
-/* Here is a function which callers may wish to use for read_memory_func.
- It gets bytes from a buffer. */
-int buffer_read_memory(bfd_vma, bfd_byte *, int, struct disassemble_info *);
-
-/* This function goes with buffer_read_memory.
- It prints a message using info->fprintf_func and info->stream. */
-void perror_memory(int, bfd_vma, struct disassemble_info *);
-
-
-/* Just print the address in hex. This is included for completeness even
- though both GDB and objdump provide their own (to print symbolic
- addresses). */
-void generic_print_address(bfd_vma, struct disassemble_info *);
-
-/* Always true. */
-int generic_symbol_at_address(bfd_vma, struct disassemble_info *);
-
-/* Macro to initialize a disassemble_info struct. This should be called
- by all applications creating such a struct. */
-#define INIT_DISASSEMBLE_INFO(INFO, STREAM, FPRINTF_FUNC) \
- (INFO).flavour = bfd_target_unknown_flavour, \
- (INFO).arch = bfd_arch_unknown, \
- (INFO).mach = 0, \
- (INFO).endian = BFD_ENDIAN_UNKNOWN, \
- INIT_DISASSEMBLE_INFO_NO_ARCH(INFO, STREAM, FPRINTF_FUNC)
-
-/* Call this macro to initialize only the internal variables for the
- disassembler. Architecture dependent things such as byte order, or machine
- variant are not touched by this macro. This makes things much easier for
- GDB which must initialize these things separately. */
-
-#define INIT_DISASSEMBLE_INFO_NO_ARCH(INFO, STREAM, FPRINTF_FUNC) \
- (INFO).fprintf_func = (FPRINTF_FUNC), \
- (INFO).stream = (STREAM), \
- (INFO).symbols = NULL, \
- (INFO).num_symbols = 0, \
- (INFO).private_data = NULL, \
- (INFO).buffer = NULL, \
- (INFO).buffer_vma = 0, \
- (INFO).buffer_length = 0, \
- (INFO).read_memory_func = buffer_read_memory, \
- (INFO).memory_error_func = perror_memory, \
- (INFO).print_address_func = generic_print_address, \
- (INFO).print_insn = NULL, \
- (INFO).symbol_at_address_func = generic_symbol_at_address, \
- (INFO).flags = 0, \
- (INFO).bytes_per_line = 0, \
- (INFO).bytes_per_chunk = 0, \
- (INFO).display_endian = BFD_ENDIAN_UNKNOWN, \
- (INFO).disassembler_options = NULL, \
- (INFO).insn_info_valid = 0
-
#ifndef ATTRIBUTE_UNUSED
#define ATTRIBUTE_UNUSED __attribute__((unused))
#endif
diff --git a/disas.c b/disas.c
index a4304e8137..1f35a4a33b 100644
--- a/disas.c
+++ b/disas.c
@@ -16,78 +16,68 @@ typedef struct CPUDebug {
/* Filled in by elfload.c. Simplistic, but will do for now. */
struct syminfo *syminfos = NULL;
-/* Get LENGTH bytes from info's buffer, at target address memaddr.
- Transfer them to myaddr. */
-int
-buffer_read_memory(bfd_vma memaddr, bfd_byte *myaddr, int length,
- struct disassemble_info *info)
+/*
+ * Get LENGTH bytes from info's buffer, at host address memaddr.
+ * Transfer them to myaddr.
+ */
+static int host_read_memory(bfd_vma memaddr, bfd_byte *myaddr, int length,
+ struct disassemble_info *info)
{
if (memaddr < info->buffer_vma
- || memaddr + length > info->buffer_vma + info->buffer_length)
+ || memaddr + length > info->buffer_vma + info->buffer_length) {
/* Out of bounds. Use EIO because GDB uses it. */
return EIO;
+ }
memcpy (myaddr, info->buffer + (memaddr - info->buffer_vma), length);
return 0;
}
-/* Get LENGTH bytes from info's buffer, at target address memaddr.
- Transfer them to myaddr. */
-static int
-target_read_memory (bfd_vma memaddr,
- bfd_byte *myaddr,
- int length,
- struct disassemble_info *info)
+/*
+ * Get LENGTH bytes from info's buffer, at target address memaddr.
+ * Transfer them to myaddr.
+ */
+static int target_read_memory(bfd_vma memaddr, bfd_byte *myaddr, int length,
+ struct disassemble_info *info)
{
CPUDebug *s = container_of(info, CPUDebug, info);
- int r;
-
- r = cpu_memory_rw_debug(s->cpu, memaddr, myaddr, length, 0);
-
+ int r = cpu_memory_rw_debug(s->cpu, memaddr, myaddr, length, 0);
return r ? EIO : 0;
}
-/* Print an error message. We can assume that this is in response to
- an error return from buffer_read_memory. */
-void
-perror_memory (int status, bfd_vma memaddr, struct disassemble_info *info)
+/*
+ * Print an error message. We can assume that this is in response to
+ * an error return from {host,target}_read_memory.
+ */
+static void perror_memory(int status, bfd_vma memaddr,
+ struct disassemble_info *info)
{
- if (status != EIO)
- /* Can't happen. */
- (*info->fprintf_func) (info->stream, "Unknown error %d\n", status);
- else
- /* Actually, address between memaddr and memaddr + len was
- out of bounds. */
- (*info->fprintf_func) (info->stream,
- "Address 0x%" PRIx64 " is out of bounds.\n", memaddr);
+ if (status != EIO) {
+ /* Can't happen. */
+ info->fprintf_func(info->stream, "Unknown error %d\n", status);
+ } else {
+ /* Address between memaddr and memaddr + len was out of bounds. */
+ info->fprintf_func(info->stream,
+ "Address 0x%" PRIx64 " is out of bounds.\n",
+ memaddr);
+ }
}
-/* This could be in a separate file, to save minuscule amounts of space
- in statically linked executables. */
-
-/* Just print the address is hex. This is included for completeness even
- though both GDB and objdump provide their own (to print symbolic
- addresses). */
-
-void
-generic_print_address (bfd_vma addr, struct disassemble_info *info)
+/* Print address in hex. */
+static void print_address(bfd_vma addr, struct disassemble_info *info)
{
- (*info->fprintf_func) (info->stream, "0x%" PRIx64, addr);
+ info->fprintf_func(info->stream, "0x%" PRIx64, addr);
}
/* Print address in hex, truncated to the width of a host virtual address. */
-static void
-generic_print_host_address(bfd_vma addr, struct disassemble_info *info)
+static void host_print_address(bfd_vma addr, struct disassemble_info *info)
{
- uint64_t mask = ~0ULL >> (64 - (sizeof(void *) * 8));
- generic_print_address(addr & mask, info);
+ print_address((uintptr_t)addr, info);
}
-/* Just return the given address. */
-
-int
-generic_symbol_at_address (bfd_vma addr, struct disassemble_info *info)
+/* Stub prevents some fruitless earching in optabs disassemblers. */
+static int symbol_at_address(bfd_vma addr, struct disassemble_info *info)
{
- return 1;
+ return 1;
}
bfd_vma bfd_getl64 (const bfd_byte *addr)
@@ -423,36 +413,116 @@ static bool cap_disas_monitor(disassemble_info *info, uint64_t pc, int count)
# define cap_disas_plugin(i, p, c) false
#endif /* CONFIG_CAPSTONE */
+static void initialize_debug(CPUDebug *s)
+{
+ memset(s, 0, sizeof(*s));
+ s->info.arch = bfd_arch_unknown;
+ s->info.cap_arch = -1;
+ s->info.cap_insn_unit = 4;
+ s->info.cap_insn_split = 4;
+ s->info.memory_error_func = perror_memory;
+ s->info.symbol_at_address_func = symbol_at_address;
+}
+
+static void initialize_debug_target(CPUDebug *s, CPUState *cpu)
+{
+ initialize_debug(s);
+
+ s->cpu = cpu;
+ s->info.read_memory_func = target_read_memory;
+ s->info.print_address_func = print_address;
+#ifdef TARGET_WORDS_BIGENDIAN
+ s->info.endian = BFD_ENDIAN_BIG;
+#else
+ s->info.endian = BFD_ENDIAN_LITTLE;
+#endif
+
+ CPUClass *cc = CPU_GET_CLASS(cpu);
+ if (cc->disas_set_info) {
+ cc->disas_set_info(cpu, &s->info);
+ }
+}
+
+static void initialize_debug_host(CPUDebug *s)
+{
+ initialize_debug(s);
+
+ s->info.read_memory_func = host_read_memory;
+ s->info.print_address_func = host_print_address;
+#ifdef HOST_WORDS_BIGENDIAN
+ s->info.endian = BFD_ENDIAN_BIG;
+#else
+ s->info.endian = BFD_ENDIAN_LITTLE;
+#endif
+#if defined(CONFIG_TCG_INTERPRETER)
+ s->info.print_insn = print_insn_tci;
+#elif defined(__i386__)
+ s->info.mach = bfd_mach_i386_i386;
+ s->info.print_insn = print_insn_i386;
+ s->info.cap_arch = CS_ARCH_X86;
+ s->info.cap_mode = CS_MODE_32;
+ s->info.cap_insn_unit = 1;
+ s->info.cap_insn_split = 8;
+#elif defined(__x86_64__)
+ s->info.mach = bfd_mach_x86_64;
+ s->info.print_insn = print_insn_i386;
+ s->info.cap_arch = CS_ARCH_X86;
+ s->info.cap_mode = CS_MODE_64;
+ s->info.cap_insn_unit = 1;
+ s->info.cap_insn_split = 8;
+#elif defined(_ARCH_PPC)
+ s->info.disassembler_options = (char *)"any";
+ s->info.print_insn = print_insn_ppc;
+ s->info.cap_arch = CS_ARCH_PPC;
+# ifdef _ARCH_PPC64
+ s->info.cap_mode = CS_MODE_64;
+# endif
+#elif defined(__riscv) && defined(CONFIG_RISCV_DIS)
+#if defined(_ILP32) || (__riscv_xlen == 32)
+ s->info.print_insn = print_insn_riscv32;
+#elif defined(_LP64)
+ s->info.print_insn = print_insn_riscv64;
+#else
+#error unsupported RISC-V ABI
+#endif
+#elif defined(__aarch64__) && defined(CONFIG_ARM_A64_DIS)
+ s->info.print_insn = print_insn_arm_a64;
+ s->info.cap_arch = CS_ARCH_ARM64;
+#elif defined(__alpha__)
+ s->info.print_insn = print_insn_alpha;
+#elif defined(__sparc__)
+ s->info.print_insn = print_insn_sparc;
+ s->info.mach = bfd_mach_sparc_v9b;
+#elif defined(__arm__)
+ /* TCG only generates code for arm mode. */
+ s->info.print_insn = print_insn_arm;
+ s->info.cap_arch = CS_ARCH_ARM;
+#elif defined(__MIPSEB__)
+ s->info.print_insn = print_insn_big_mips;
+#elif defined(__MIPSEL__)
+ s->info.print_insn = print_insn_little_mips;
+#elif defined(__m68k__)
+ s->info.print_insn = print_insn_m68k;
+#elif defined(__s390__)
+ s->info.print_insn = print_insn_s390;
+#elif defined(__hppa__)
+ s->info.print_insn = print_insn_hppa;
+#endif
+}
+
/* Disassemble this for me please... (debugging). */
void target_disas(FILE *out, CPUState *cpu, target_ulong code,
target_ulong size)
{
- CPUClass *cc = CPU_GET_CLASS(cpu);
target_ulong pc;
int count;
CPUDebug s;
- INIT_DISASSEMBLE_INFO(s.info, out, fprintf);
-
- s.cpu = cpu;
- s.info.read_memory_func = target_read_memory;
+ initialize_debug_target(&s, cpu);
+ s.info.fprintf_func = fprintf;
+ s.info.stream = out;
s.info.buffer_vma = code;
s.info.buffer_length = size;
- s.info.print_address_func = generic_print_address;
- s.info.cap_arch = -1;
- s.info.cap_mode = 0;
- s.info.cap_insn_unit = 4;
- s.info.cap_insn_split = 4;
-
-#ifdef TARGET_WORDS_BIGENDIAN
- s.info.endian = BFD_ENDIAN_BIG;
-#else
- s.info.endian = BFD_ENDIAN_LITTLE;
-#endif
-
- if (cc->disas_set_info) {
- cc->disas_set_info(cpu, &s.info);
- }
if (s.info.cap_arch >= 0 && cap_disas_target(&s.info, code, size)) {
return;
@@ -540,34 +610,17 @@ bool cap_disas_plugin(disassemble_info *info, uint64_t pc, size_t size)
*/
char *plugin_disas(CPUState *cpu, uint64_t addr, size_t size)
{
- CPUClass *cc = CPU_GET_CLASS(cpu);
int count;
CPUDebug s;
GString *ds = g_string_set_size(&plugin_disas_output, 0);
g_assert(ds == &plugin_disas_output);
- INIT_DISASSEMBLE_INFO(s.info, NULL, plugin_printf);
-
- s.cpu = cpu;
- s.info.read_memory_func = target_read_memory;
+ initialize_debug_target(&s, cpu);
+ s.info.fprintf_func = plugin_printf;
s.info.buffer_vma = addr;
s.info.buffer_length = size;
s.info.print_address_func = plugin_print_address;
- s.info.cap_arch = -1;
- s.info.cap_mode = 0;
- s.info.cap_insn_unit = 4;
- s.info.cap_insn_split = 4;
-
-#ifdef TARGET_WORDS_BIGENDIAN
- s.info.endian = BFD_ENDIAN_BIG;
-#else
- s.info.endian = BFD_ENDIAN_LITTLE;
-#endif
-
- if (cc->disas_set_info) {
- cc->disas_set_info(cpu, &s.info);
- }
if (s.info.cap_arch >= 0 && cap_disas_plugin(&s.info, addr, size)) {
return g_strdup(ds->str);
@@ -593,89 +646,24 @@ void disas(FILE *out, void *code, unsigned long size)
uintptr_t pc;
int count;
CPUDebug s;
- int (*print_insn)(bfd_vma pc, disassemble_info *info) = NULL;
-
- INIT_DISASSEMBLE_INFO(s.info, out, fprintf);
- s.info.print_address_func = generic_print_host_address;
+ initialize_debug_host(&s);
+ s.info.fprintf_func = fprintf;
+ s.info.stream = out;
s.info.buffer = code;
s.info.buffer_vma = (uintptr_t)code;
s.info.buffer_length = size;
- s.info.cap_arch = -1;
- s.info.cap_mode = 0;
- s.info.cap_insn_unit = 4;
- s.info.cap_insn_split = 4;
-
-#ifdef HOST_WORDS_BIGENDIAN
- s.info.endian = BFD_ENDIAN_BIG;
-#else
- s.info.endian = BFD_ENDIAN_LITTLE;
-#endif
-#if defined(CONFIG_TCG_INTERPRETER)
- print_insn = print_insn_tci;
-#elif defined(__i386__)
- s.info.mach = bfd_mach_i386_i386;
- print_insn = print_insn_i386;
- s.info.cap_arch = CS_ARCH_X86;
- s.info.cap_mode = CS_MODE_32;
- s.info.cap_insn_unit = 1;
- s.info.cap_insn_split = 8;
-#elif defined(__x86_64__)
- s.info.mach = bfd_mach_x86_64;
- print_insn = print_insn_i386;
- s.info.cap_arch = CS_ARCH_X86;
- s.info.cap_mode = CS_MODE_64;
- s.info.cap_insn_unit = 1;
- s.info.cap_insn_split = 8;
-#elif defined(_ARCH_PPC)
- s.info.disassembler_options = (char *)"any";
- print_insn = print_insn_ppc;
- s.info.cap_arch = CS_ARCH_PPC;
-# ifdef _ARCH_PPC64
- s.info.cap_mode = CS_MODE_64;
-# endif
-#elif defined(__riscv) && defined(CONFIG_RISCV_DIS)
-#if defined(_ILP32) || (__riscv_xlen == 32)
- print_insn = print_insn_riscv32;
-#elif defined(_LP64)
- print_insn = print_insn_riscv64;
-#else
-#error unsupported RISC-V ABI
-#endif
-#elif defined(__aarch64__) && defined(CONFIG_ARM_A64_DIS)
- print_insn = print_insn_arm_a64;
- s.info.cap_arch = CS_ARCH_ARM64;
-#elif defined(__alpha__)
- print_insn = print_insn_alpha;
-#elif defined(__sparc__)
- print_insn = print_insn_sparc;
- s.info.mach = bfd_mach_sparc_v9b;
-#elif defined(__arm__)
- print_insn = print_insn_arm;
- s.info.cap_arch = CS_ARCH_ARM;
- /* TCG only generates code for arm mode. */
-#elif defined(__MIPSEB__)
- print_insn = print_insn_big_mips;
-#elif defined(__MIPSEL__)
- print_insn = print_insn_little_mips;
-#elif defined(__m68k__)
- print_insn = print_insn_m68k;
-#elif defined(__s390__)
- print_insn = print_insn_s390;
-#elif defined(__hppa__)
- print_insn = print_insn_hppa;
-#endif
if (s.info.cap_arch >= 0 && cap_disas_host(&s.info, code, size)) {
return;
}
- if (print_insn == NULL) {
- print_insn = print_insn_od_host;
+ if (s.info.print_insn == NULL) {
+ s.info.print_insn = print_insn_od_host;
}
for (pc = (uintptr_t)code; size > 0; pc += count, size -= count) {
fprintf(out, "0x%08" PRIxPTR ": ", pc);
- count = print_insn(pc, &s.info);
+ count = s.info.print_insn(pc, &s.info);
fprintf(out, "\n");
if (count < 0) {
break;
@@ -720,31 +708,15 @@ physical_read_memory(bfd_vma memaddr, bfd_byte *myaddr, int length,
void monitor_disas(Monitor *mon, CPUState *cpu,
target_ulong pc, int nb_insn, int is_physical)
{
- CPUClass *cc = CPU_GET_CLASS(cpu);
int count, i;
CPUDebug s;
- INIT_DISASSEMBLE_INFO(s.info, NULL, qemu_fprintf);
-
- s.cpu = cpu;
- s.info.read_memory_func
- = (is_physical ? physical_read_memory : target_read_memory);
- s.info.print_address_func = generic_print_address;
- s.info.buffer_vma = pc;
- s.info.cap_arch = -1;
- s.info.cap_mode = 0;
- s.info.cap_insn_unit = 4;
- s.info.cap_insn_split = 4;
-
-#ifdef TARGET_WORDS_BIGENDIAN
- s.info.endian = BFD_ENDIAN_BIG;
-#else
- s.info.endian = BFD_ENDIAN_LITTLE;
-#endif
-
- if (cc->disas_set_info) {
- cc->disas_set_info(cpu, &s.info);
+ initialize_debug_target(&s, cpu);
+ s.info.fprintf_func = qemu_fprintf;
+ if (is_physical) {
+ s.info.read_memory_func = physical_read_memory;
}
+ s.info.buffer_vma = pc;
if (s.info.cap_arch >= 0 && cap_disas_monitor(&s.info, pc, nb_insn)) {
return;
--
2.25.1
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PULL 06/11] disas: Use qemu/bswap.h for bfd endian loads
2020-09-22 17:47 [PULL 00/11] capstone + disassembler patch queue Richard Henderson
` (4 preceding siblings ...)
2020-09-22 17:47 ` [PULL 05/11] disas: Clean up CPUDebug initialization Richard Henderson
@ 2020-09-22 17:47 ` Richard Henderson
2020-09-22 17:47 ` [PULL 07/11] disas: Cleanup plugin_disas Richard Henderson
` (6 subsequent siblings)
12 siblings, 0 replies; 16+ messages in thread
From: Richard Henderson @ 2020-09-22 17:47 UTC (permalink / raw)
To: qemu-devel; +Cc: peter.maydell, Alex Bennée, Philippe Mathieu-Daudé
Use the routines we have already instead of open-coding.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
include/disas/dis-asm.h | 32 ++++++++++++++++++++----
disas.c | 55 -----------------------------------------
2 files changed, 27 insertions(+), 60 deletions(-)
diff --git a/include/disas/dis-asm.h b/include/disas/dis-asm.h
index dda247eaf2..6b45aa9898 100644
--- a/include/disas/dis-asm.h
+++ b/include/disas/dis-asm.h
@@ -466,11 +466,33 @@ int print_insn_rx(bfd_vma, disassemble_info *);
/* from libbfd */
-bfd_vma bfd_getl64 (const bfd_byte *addr);
-bfd_vma bfd_getl32 (const bfd_byte *addr);
-bfd_vma bfd_getb32 (const bfd_byte *addr);
-bfd_vma bfd_getl16 (const bfd_byte *addr);
-bfd_vma bfd_getb16 (const bfd_byte *addr);
+#include "qemu/bswap.h"
+
+static inline bfd_vma bfd_getl64(const bfd_byte *addr)
+{
+ return ldq_le_p(addr);
+}
+
+static inline bfd_vma bfd_getl32(const bfd_byte *addr)
+{
+ return (uint32_t)ldl_le_p(addr);
+}
+
+static inline bfd_vma bfd_getl16(const bfd_byte *addr)
+{
+ return lduw_le_p(addr);
+}
+
+static inline bfd_vma bfd_getb32(const bfd_byte *addr)
+{
+ return (uint32_t)ldl_be_p(addr);
+}
+
+static inline bfd_vma bfd_getb16(const bfd_byte *addr)
+{
+ return lduw_be_p(addr);
+}
+
typedef bool bfd_boolean;
#endif /* DISAS_DIS_ASM_H */
diff --git a/disas.c b/disas.c
index 1f35a4a33b..8d1403dedc 100644
--- a/disas.c
+++ b/disas.c
@@ -80,61 +80,6 @@ static int symbol_at_address(bfd_vma addr, struct disassemble_info *info)
return 1;
}
-bfd_vma bfd_getl64 (const bfd_byte *addr)
-{
- unsigned long long v;
-
- v = (unsigned long long) addr[0];
- v |= (unsigned long long) addr[1] << 8;
- v |= (unsigned long long) addr[2] << 16;
- v |= (unsigned long long) addr[3] << 24;
- v |= (unsigned long long) addr[4] << 32;
- v |= (unsigned long long) addr[5] << 40;
- v |= (unsigned long long) addr[6] << 48;
- v |= (unsigned long long) addr[7] << 56;
- return (bfd_vma) v;
-}
-
-bfd_vma bfd_getl32 (const bfd_byte *addr)
-{
- unsigned long v;
-
- v = (unsigned long) addr[0];
- v |= (unsigned long) addr[1] << 8;
- v |= (unsigned long) addr[2] << 16;
- v |= (unsigned long) addr[3] << 24;
- return (bfd_vma) v;
-}
-
-bfd_vma bfd_getb32 (const bfd_byte *addr)
-{
- unsigned long v;
-
- v = (unsigned long) addr[0] << 24;
- v |= (unsigned long) addr[1] << 16;
- v |= (unsigned long) addr[2] << 8;
- v |= (unsigned long) addr[3];
- return (bfd_vma) v;
-}
-
-bfd_vma bfd_getl16 (const bfd_byte *addr)
-{
- unsigned long v;
-
- v = (unsigned long) addr[0];
- v |= (unsigned long) addr[1] << 8;
- return (bfd_vma) v;
-}
-
-bfd_vma bfd_getb16 (const bfd_byte *addr)
-{
- unsigned long v;
-
- v = (unsigned long) addr[0] << 24;
- v |= (unsigned long) addr[1] << 16;
- return (bfd_vma) v;
-}
-
static int print_insn_objdump(bfd_vma pc, disassemble_info *info,
const char *prefix)
{
--
2.25.1
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PULL 07/11] disas: Cleanup plugin_disas
2020-09-22 17:47 [PULL 00/11] capstone + disassembler patch queue Richard Henderson
` (5 preceding siblings ...)
2020-09-22 17:47 ` [PULL 06/11] disas: Use qemu/bswap.h for bfd endian loads Richard Henderson
@ 2020-09-22 17:47 ` Richard Henderson
2020-09-22 17:47 ` [PULL 08/11] disas: Configure capstone for aarch64 host without libvixl Richard Henderson
` (5 subsequent siblings)
12 siblings, 0 replies; 16+ messages in thread
From: Richard Henderson @ 2020-09-22 17:47 UTC (permalink / raw)
To: qemu-devel; +Cc: peter.maydell, Alex Bennée
Do not retain a GString in thread-local storage. Allocate a
new one and free it on every invocation. Do not g_strdup the
result; return the buffer from the GString. Do not use
warn_report.
Using cs_disasm allocated memory via the &insn parameter, but
that was never freed. Use cs_disasm_iter so that we use the
memory that we've already allocated, and so that we only try
to disassemble one insn, as desired. Do not allocate 1k to
hold the bytes for a single instruction.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
disas.c | 55 +++++++++++++++++++------------------------------------
1 file changed, 19 insertions(+), 36 deletions(-)
diff --git a/disas.c b/disas.c
index 8d1403dedc..54a540180f 100644
--- a/disas.c
+++ b/disas.c
@@ -493,13 +493,12 @@ void target_disas(FILE *out, CPUState *cpu, target_ulong code,
}
}
-static __thread GString plugin_disas_output;
-
static int plugin_printf(FILE *stream, const char *fmt, ...)
{
- va_list va;
- GString *s = &plugin_disas_output;
+ /* We abuse the FILE parameter to pass a GString. */
+ GString *s = (GString *)stream;
int initial_len = s->len;
+ va_list va;
va_start(va, fmt);
g_string_append_vprintf(s, fmt, va);
@@ -519,28 +518,20 @@ static void plugin_print_address(bfd_vma addr, struct disassemble_info *info)
static
bool cap_disas_plugin(disassemble_info *info, uint64_t pc, size_t size)
{
- uint8_t cap_buf[1024];
+ uint8_t cap_buf[64];
+ const uint8_t *cbuf = cap_buf;
csh handle;
- cs_insn *insn;
- size_t csize = 0;
- int count;
- GString *s = &plugin_disas_output;
if (cap_disas_start(info, &handle) != CS_ERR_OK) {
return false;
}
- insn = cap_insn;
- size_t tsize = MIN(sizeof(cap_buf) - csize, size);
- const uint8_t *cbuf = cap_buf;
- target_read_memory(pc, cap_buf, tsize, info);
+ assert(size < sizeof(cap_buf));
+ target_read_memory(pc, cap_buf, size, info);
- count = cs_disasm(handle, cbuf, size, 0, 1, &insn);
-
- if (count) {
- g_string_printf(s, "%s %s", insn->mnemonic, insn->op_str);
- } else {
- g_string_printf(s, "cs_disasm failed");
+ if (cs_disasm_iter(handle, &cbuf, &size, &pc, cap_insn)) {
+ GString *s = (GString *)info->stream;
+ g_string_printf(s, "%s %s", cap_insn->mnemonic, cap_insn->op_str);
}
cs_close(&handle);
@@ -555,34 +546,26 @@ bool cap_disas_plugin(disassemble_info *info, uint64_t pc, size_t size)
*/
char *plugin_disas(CPUState *cpu, uint64_t addr, size_t size)
{
- int count;
CPUDebug s;
- GString *ds = g_string_set_size(&plugin_disas_output, 0);
-
- g_assert(ds == &plugin_disas_output);
+ GString *ds = g_string_new(NULL);
initialize_debug_target(&s, cpu);
s.info.fprintf_func = plugin_printf;
+ s.info.stream = (FILE *)ds; /* abuse this slot */
s.info.buffer_vma = addr;
s.info.buffer_length = size;
s.info.print_address_func = plugin_print_address;
if (s.info.cap_arch >= 0 && cap_disas_plugin(&s.info, addr, size)) {
- return g_strdup(ds->str);
+ ; /* done */
+ } else if (s.info.print_insn) {
+ s.info.print_insn(addr, &s.info);
+ } else {
+ ; /* cannot disassemble -- return empty string */
}
- if (s.info.print_insn == NULL) {
- s.info.print_insn = print_insn_od_target;
- }
-
- count = s.info.print_insn(addr, &s.info);
-
- /* The decoder probably read more than it needed it's not critical */
- if (count < size) {
- warn_report("%s: %zu bytes left over", __func__, size - count);
- }
-
- return g_strdup(ds->str);
+ /* Return the buffer, freeing the GString container. */
+ return g_string_free(ds, false);
}
/* Disassemble this for me please... (debugging). */
--
2.25.1
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PULL 08/11] disas: Configure capstone for aarch64 host without libvixl
2020-09-22 17:47 [PULL 00/11] capstone + disassembler patch queue Richard Henderson
` (6 preceding siblings ...)
2020-09-22 17:47 ` [PULL 07/11] disas: Cleanup plugin_disas Richard Henderson
@ 2020-09-22 17:47 ` Richard Henderson
2020-09-22 17:47 ` [PULL 09/11] disas: Split out capstone code to disas/capstone.c Richard Henderson
` (4 subsequent siblings)
12 siblings, 0 replies; 16+ messages in thread
From: Richard Henderson @ 2020-09-22 17:47 UTC (permalink / raw)
To: qemu-devel
Cc: peter.maydell, Thomas Huth, Alex Bennée,
Philippe Mathieu-Daudé
The ifdef tangle failed to set cap_arch if libvixl itself
was not configured (e.g. due to lack of c++ compiler).
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
disas.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/disas.c b/disas.c
index 54a540180f..cafd063d42 100644
--- a/disas.c
+++ b/disas.c
@@ -430,9 +430,11 @@ static void initialize_debug_host(CPUDebug *s)
#else
#error unsupported RISC-V ABI
#endif
-#elif defined(__aarch64__) && defined(CONFIG_ARM_A64_DIS)
- s->info.print_insn = print_insn_arm_a64;
+#elif defined(__aarch64__)
s->info.cap_arch = CS_ARCH_ARM64;
+# ifdef CONFIG_ARM_A64_DIS
+ s->info.print_insn = print_insn_arm_a64;
+# endif
#elif defined(__alpha__)
s->info.print_insn = print_insn_alpha;
#elif defined(__sparc__)
--
2.25.1
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PULL 09/11] disas: Split out capstone code to disas/capstone.c
2020-09-22 17:47 [PULL 00/11] capstone + disassembler patch queue Richard Henderson
` (7 preceding siblings ...)
2020-09-22 17:47 ` [PULL 08/11] disas: Configure capstone for aarch64 host without libvixl Richard Henderson
@ 2020-09-22 17:47 ` Richard Henderson
2020-09-22 17:47 ` [PULL 10/11] disas: Enable capstone disassembly for s390x Richard Henderson
` (3 subsequent siblings)
12 siblings, 0 replies; 16+ messages in thread
From: Richard Henderson @ 2020-09-22 17:47 UTC (permalink / raw)
To: qemu-devel; +Cc: peter.maydell, Alex Bennée
There is nothing target-specific about this code, so it
can be added to common_ss. This also requires that the
base capstone dependency be added to common_ss, so that
we get the correct include paths added to CFLAGS.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
meson.build | 1 +
include/disas/dis-asm.h | 12 ++
disas.c | 275 --------------------------------------
disas/capstone.c | 286 ++++++++++++++++++++++++++++++++++++++++
disas/meson.build | 1 +
5 files changed, 300 insertions(+), 275 deletions(-)
create mode 100644 disas/capstone.c
diff --git a/meson.build b/meson.build
index 114b136129..f06e3a1b65 100644
--- a/meson.build
+++ b/meson.build
@@ -965,6 +965,7 @@ common_ss.add(files('cpus-common.c'))
subdir('softmmu')
+common_ss.add(capstone)
specific_ss.add(files('disas.c', 'exec.c', 'gdbstub.c'), capstone, libpmem, libdaxctl)
specific_ss.add(files('exec-vary.c'))
specific_ss.add(when: 'CONFIG_TCG', if_true: files(
diff --git a/include/disas/dis-asm.h b/include/disas/dis-asm.h
index 6b45aa9898..2164762b46 100644
--- a/include/disas/dis-asm.h
+++ b/include/disas/dis-asm.h
@@ -460,6 +460,18 @@ int print_insn_riscv32 (bfd_vma, disassemble_info*);
int print_insn_riscv64 (bfd_vma, disassemble_info*);
int print_insn_rx(bfd_vma, disassemble_info *);
+#ifdef CONFIG_CAPSTONE
+bool cap_disas_target(disassemble_info *info, uint64_t pc, size_t size);
+bool cap_disas_host(disassemble_info *info, void *code, size_t size);
+bool cap_disas_monitor(disassemble_info *info, uint64_t pc, int count);
+bool cap_disas_plugin(disassemble_info *info, uint64_t pc, size_t size);
+#else
+# define cap_disas_target(i, p, s) false
+# define cap_disas_host(i, p, s) false
+# define cap_disas_monitor(i, p, c) false
+# define cap_disas_plugin(i, p, c) false
+#endif /* CONFIG_CAPSTONE */
+
#ifndef ATTRIBUTE_UNUSED
#define ATTRIBUTE_UNUSED __attribute__((unused))
#endif
diff --git a/disas.c b/disas.c
index cafd063d42..9dfbeededc 100644
--- a/disas.c
+++ b/disas.c
@@ -109,255 +109,6 @@ static int print_insn_od_target(bfd_vma pc, disassemble_info *info)
return print_insn_objdump(pc, info, "OBJD-T");
}
-#ifdef CONFIG_CAPSTONE
-/* Temporary storage for the capstone library. This will be alloced via
- malloc with a size private to the library; thus there's no reason not
- to share this across calls and across host vs target disassembly. */
-static __thread cs_insn *cap_insn;
-
-/* Initialize the Capstone library. */
-/* ??? It would be nice to cache this. We would need one handle for the
- host and one for the target. For most targets we can reset specific
- parameters via cs_option(CS_OPT_MODE, new_mode), but we cannot change
- CS_ARCH_* in this way. Thus we would need to be able to close and
- re-open the target handle with a different arch for the target in order
- to handle AArch64 vs AArch32 mode switching. */
-static cs_err cap_disas_start(disassemble_info *info, csh *handle)
-{
- cs_mode cap_mode = info->cap_mode;
- cs_err err;
-
- cap_mode += (info->endian == BFD_ENDIAN_BIG ? CS_MODE_BIG_ENDIAN
- : CS_MODE_LITTLE_ENDIAN);
-
- err = cs_open(info->cap_arch, cap_mode, handle);
- if (err != CS_ERR_OK) {
- return err;
- }
-
- /* ??? There probably ought to be a better place to put this. */
- if (info->cap_arch == CS_ARCH_X86) {
- /* We don't care about errors (if for some reason the library
- is compiled without AT&T syntax); the user will just have
- to deal with the Intel syntax. */
- cs_option(*handle, CS_OPT_SYNTAX, CS_OPT_SYNTAX_ATT);
- }
-
- /* "Disassemble" unknown insns as ".byte W,X,Y,Z". */
- cs_option(*handle, CS_OPT_SKIPDATA, CS_OPT_ON);
-
- /* Allocate temp space for cs_disasm_iter. */
- if (cap_insn == NULL) {
- cap_insn = cs_malloc(*handle);
- if (cap_insn == NULL) {
- cs_close(handle);
- return CS_ERR_MEM;
- }
- }
- return CS_ERR_OK;
-}
-
-static void cap_dump_insn_units(disassemble_info *info, cs_insn *insn,
- int i, int n)
-{
- fprintf_function print = info->fprintf_func;
- FILE *stream = info->stream;
-
- switch (info->cap_insn_unit) {
- case 4:
- if (info->endian == BFD_ENDIAN_BIG) {
- for (; i < n; i += 4) {
- print(stream, " %08x", ldl_be_p(insn->bytes + i));
-
- }
- } else {
- for (; i < n; i += 4) {
- print(stream, " %08x", ldl_le_p(insn->bytes + i));
- }
- }
- break;
-
- case 2:
- if (info->endian == BFD_ENDIAN_BIG) {
- for (; i < n; i += 2) {
- print(stream, " %04x", lduw_be_p(insn->bytes + i));
- }
- } else {
- for (; i < n; i += 2) {
- print(stream, " %04x", lduw_le_p(insn->bytes + i));
- }
- }
- break;
-
- default:
- for (; i < n; i++) {
- print(stream, " %02x", insn->bytes[i]);
- }
- break;
- }
-}
-
-static void cap_dump_insn(disassemble_info *info, cs_insn *insn)
-{
- fprintf_function print = info->fprintf_func;
- int i, n, split;
-
- print(info->stream, "0x%08" PRIx64 ": ", insn->address);
-
- n = insn->size;
- split = info->cap_insn_split;
-
- /* Dump the first SPLIT bytes of the instruction. */
- cap_dump_insn_units(info, insn, 0, MIN(n, split));
-
- /* Add padding up to SPLIT so that mnemonics line up. */
- if (n < split) {
- int width = (split - n) / info->cap_insn_unit;
- width *= (2 * info->cap_insn_unit + 1);
- print(info->stream, "%*s", width, "");
- }
-
- /* Print the actual instruction. */
- print(info->stream, " %-8s %s\n", insn->mnemonic, insn->op_str);
-
- /* Dump any remaining part of the insn on subsequent lines. */
- for (i = split; i < n; i += split) {
- print(info->stream, "0x%08" PRIx64 ": ", insn->address + i);
- cap_dump_insn_units(info, insn, i, MIN(n, i + split));
- print(info->stream, "\n");
- }
-}
-
-/* Disassemble SIZE bytes at PC for the target. */
-static bool cap_disas_target(disassemble_info *info, uint64_t pc, size_t size)
-{
- uint8_t cap_buf[1024];
- csh handle;
- cs_insn *insn;
- size_t csize = 0;
-
- if (cap_disas_start(info, &handle) != CS_ERR_OK) {
- return false;
- }
- insn = cap_insn;
-
- while (1) {
- size_t tsize = MIN(sizeof(cap_buf) - csize, size);
- const uint8_t *cbuf = cap_buf;
-
- target_read_memory(pc + csize, cap_buf + csize, tsize, info);
- csize += tsize;
- size -= tsize;
-
- while (cs_disasm_iter(handle, &cbuf, &csize, &pc, insn)) {
- cap_dump_insn(info, insn);
- }
-
- /* If the target memory is not consumed, go back for more... */
- if (size != 0) {
- /* ... taking care to move any remaining fractional insn
- to the beginning of the buffer. */
- if (csize != 0) {
- memmove(cap_buf, cbuf, csize);
- }
- continue;
- }
-
- /* Since the target memory is consumed, we should not have
- a remaining fractional insn. */
- if (csize != 0) {
- (*info->fprintf_func)(info->stream,
- "Disassembler disagrees with translator "
- "over instruction decoding\n"
- "Please report this to qemu-devel@nongnu.org\n");
- }
- break;
- }
-
- cs_close(&handle);
- return true;
-}
-
-/* Disassemble SIZE bytes at CODE for the host. */
-static bool cap_disas_host(disassemble_info *info, void *code, size_t size)
-{
- csh handle;
- const uint8_t *cbuf;
- cs_insn *insn;
- uint64_t pc;
-
- if (cap_disas_start(info, &handle) != CS_ERR_OK) {
- return false;
- }
- insn = cap_insn;
-
- cbuf = code;
- pc = (uintptr_t)code;
-
- while (cs_disasm_iter(handle, &cbuf, &size, &pc, insn)) {
- cap_dump_insn(info, insn);
- }
- if (size != 0) {
- (*info->fprintf_func)(info->stream,
- "Disassembler disagrees with TCG over instruction encoding\n"
- "Please report this to qemu-devel@nongnu.org\n");
- }
-
- cs_close(&handle);
- return true;
-}
-
-#if !defined(CONFIG_USER_ONLY)
-/* Disassemble COUNT insns at PC for the target. */
-static bool cap_disas_monitor(disassemble_info *info, uint64_t pc, int count)
-{
- uint8_t cap_buf[32];
- csh handle;
- cs_insn *insn;
- size_t csize = 0;
-
- if (cap_disas_start(info, &handle) != CS_ERR_OK) {
- return false;
- }
- insn = cap_insn;
-
- while (1) {
- /* We want to read memory for one insn, but generically we do not
- know how much memory that is. We have a small buffer which is
- known to be sufficient for all supported targets. Try to not
- read beyond the page, Just In Case. For even more simplicity,
- ignore the actual target page size and use a 1k boundary. If
- that turns out to be insufficient, we'll come back around the
- loop and read more. */
- uint64_t epc = QEMU_ALIGN_UP(pc + csize + 1, 1024);
- size_t tsize = MIN(sizeof(cap_buf) - csize, epc - pc);
- const uint8_t *cbuf = cap_buf;
-
- /* Make certain that we can make progress. */
- assert(tsize != 0);
- info->read_memory_func(pc, cap_buf + csize, tsize, info);
- csize += tsize;
-
- if (cs_disasm_iter(handle, &cbuf, &csize, &pc, insn)) {
- cap_dump_insn(info, insn);
- if (--count <= 0) {
- break;
- }
- }
- memmove(cap_buf, cbuf, csize);
- }
-
- cs_close(&handle);
- return true;
-}
-#endif /* !CONFIG_USER_ONLY */
-#else
-# define cap_disas_target(i, p, s) false
-# define cap_disas_host(i, p, s) false
-# define cap_disas_monitor(i, p, c) false
-# define cap_disas_plugin(i, p, c) false
-#endif /* CONFIG_CAPSTONE */
-
static void initialize_debug(CPUDebug *s)
{
memset(s, 0, sizeof(*s));
@@ -515,32 +266,6 @@ static void plugin_print_address(bfd_vma addr, struct disassemble_info *info)
}
-#ifdef CONFIG_CAPSTONE
-/* Disassemble a single instruction directly into plugin output */
-static
-bool cap_disas_plugin(disassemble_info *info, uint64_t pc, size_t size)
-{
- uint8_t cap_buf[64];
- const uint8_t *cbuf = cap_buf;
- csh handle;
-
- if (cap_disas_start(info, &handle) != CS_ERR_OK) {
- return false;
- }
-
- assert(size < sizeof(cap_buf));
- target_read_memory(pc, cap_buf, size, info);
-
- if (cs_disasm_iter(handle, &cbuf, &size, &pc, cap_insn)) {
- GString *s = (GString *)info->stream;
- g_string_printf(s, "%s %s", cap_insn->mnemonic, cap_insn->op_str);
- }
-
- cs_close(&handle);
- return true;
-}
-#endif
-
/*
* We should only be dissembling one instruction at a time here. If
* there is left over it usually indicates the front end has read more
diff --git a/disas/capstone.c b/disas/capstone.c
new file mode 100644
index 0000000000..b48f83958d
--- /dev/null
+++ b/disas/capstone.c
@@ -0,0 +1,286 @@
+/*
+ * Interface to the capstone disassembler.
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ */
+
+#include "qemu/osdep.h"
+#include "qemu/bswap.h"
+#include "disas/dis-asm.h"
+#include "disas/capstone.h"
+
+
+/*
+ * Temporary storage for the capstone library. This will be alloced via
+ * malloc with a size private to the library; thus there's no reason not
+ * to share this across calls and across host vs target disassembly.
+ */
+static __thread cs_insn *cap_insn;
+
+/*
+ * Initialize the Capstone library.
+ *
+ * ??? It would be nice to cache this. We would need one handle for the
+ * host and one for the target. For most targets we can reset specific
+ * parameters via cs_option(CS_OPT_MODE, new_mode), but we cannot change
+ * CS_ARCH_* in this way. Thus we would need to be able to close and
+ * re-open the target handle with a different arch for the target in order
+ * to handle AArch64 vs AArch32 mode switching.
+ */
+static cs_err cap_disas_start(disassemble_info *info, csh *handle)
+{
+ cs_mode cap_mode = info->cap_mode;
+ cs_err err;
+
+ cap_mode += (info->endian == BFD_ENDIAN_BIG ? CS_MODE_BIG_ENDIAN
+ : CS_MODE_LITTLE_ENDIAN);
+
+ err = cs_open(info->cap_arch, cap_mode, handle);
+ if (err != CS_ERR_OK) {
+ return err;
+ }
+
+ /* "Disassemble" unknown insns as ".byte W,X,Y,Z". */
+ cs_option(*handle, CS_OPT_SKIPDATA, CS_OPT_ON);
+
+ if (info->cap_arch == CS_ARCH_X86) {
+ /*
+ * We don't care about errors (if for some reason the library
+ * is compiled without AT&T syntax); the user will just have
+ * to deal with the Intel syntax.
+ */
+ cs_option(*handle, CS_OPT_SYNTAX, CS_OPT_SYNTAX_ATT);
+ }
+
+ /* Allocate temp space for cs_disasm_iter. */
+ if (cap_insn == NULL) {
+ cap_insn = cs_malloc(*handle);
+ if (cap_insn == NULL) {
+ cs_close(handle);
+ return CS_ERR_MEM;
+ }
+ }
+ return CS_ERR_OK;
+}
+
+static void cap_dump_insn_units(disassemble_info *info, cs_insn *insn,
+ int i, int n)
+{
+ fprintf_function print = info->fprintf_func;
+ FILE *stream = info->stream;
+
+ switch (info->cap_insn_unit) {
+ case 4:
+ if (info->endian == BFD_ENDIAN_BIG) {
+ for (; i < n; i += 4) {
+ print(stream, " %08x", ldl_be_p(insn->bytes + i));
+
+ }
+ } else {
+ for (; i < n; i += 4) {
+ print(stream, " %08x", ldl_le_p(insn->bytes + i));
+ }
+ }
+ break;
+
+ case 2:
+ if (info->endian == BFD_ENDIAN_BIG) {
+ for (; i < n; i += 2) {
+ print(stream, " %04x", lduw_be_p(insn->bytes + i));
+ }
+ } else {
+ for (; i < n; i += 2) {
+ print(stream, " %04x", lduw_le_p(insn->bytes + i));
+ }
+ }
+ break;
+
+ default:
+ for (; i < n; i++) {
+ print(stream, " %02x", insn->bytes[i]);
+ }
+ break;
+ }
+}
+
+static void cap_dump_insn(disassemble_info *info, cs_insn *insn)
+{
+ fprintf_function print = info->fprintf_func;
+ FILE *stream = info->stream;
+ int i, n, split;
+
+ print(stream, "0x%08" PRIx64 ": ", insn->address);
+
+ n = insn->size;
+ split = info->cap_insn_split;
+
+ /* Dump the first SPLIT bytes of the instruction. */
+ cap_dump_insn_units(info, insn, 0, MIN(n, split));
+
+ /* Add padding up to SPLIT so that mnemonics line up. */
+ if (n < split) {
+ int width = (split - n) / info->cap_insn_unit;
+ width *= (2 * info->cap_insn_unit + 1);
+ print(stream, "%*s", width, "");
+ }
+
+ /* Print the actual instruction. */
+ print(stream, " %-8s %s\n", insn->mnemonic, insn->op_str);
+
+ /* Dump any remaining part of the insn on subsequent lines. */
+ for (i = split; i < n; i += split) {
+ print(stream, "0x%08" PRIx64 ": ", insn->address + i);
+ cap_dump_insn_units(info, insn, i, MIN(n, i + split));
+ print(stream, "\n");
+ }
+}
+
+/* Disassemble SIZE bytes at PC for the target. */
+bool cap_disas_target(disassemble_info *info, uint64_t pc, size_t size)
+{
+ uint8_t cap_buf[1024];
+ csh handle;
+ cs_insn *insn;
+ size_t csize = 0;
+
+ if (cap_disas_start(info, &handle) != CS_ERR_OK) {
+ return false;
+ }
+ insn = cap_insn;
+
+ while (1) {
+ size_t tsize = MIN(sizeof(cap_buf) - csize, size);
+ const uint8_t *cbuf = cap_buf;
+
+ info->read_memory_func(pc + csize, cap_buf + csize, tsize, info);
+ csize += tsize;
+ size -= tsize;
+
+ while (cs_disasm_iter(handle, &cbuf, &csize, &pc, insn)) {
+ cap_dump_insn(info, insn);
+ }
+
+ /* If the target memory is not consumed, go back for more... */
+ if (size != 0) {
+ /*
+ * ... taking care to move any remaining fractional insn
+ * to the beginning of the buffer.
+ */
+ if (csize != 0) {
+ memmove(cap_buf, cbuf, csize);
+ }
+ continue;
+ }
+
+ /*
+ * Since the target memory is consumed, we should not have
+ * a remaining fractional insn.
+ */
+ if (csize != 0) {
+ info->fprintf_func(info->stream,
+ "Disassembler disagrees with translator "
+ "over instruction decoding\n"
+ "Please report this to qemu-devel@nongnu.org\n");
+ }
+ break;
+ }
+
+ cs_close(&handle);
+ return true;
+}
+
+/* Disassemble SIZE bytes at CODE for the host. */
+bool cap_disas_host(disassemble_info *info, void *code, size_t size)
+{
+ csh handle;
+ const uint8_t *cbuf;
+ cs_insn *insn;
+ uint64_t pc;
+
+ if (cap_disas_start(info, &handle) != CS_ERR_OK) {
+ return false;
+ }
+ insn = cap_insn;
+
+ cbuf = code;
+ pc = (uintptr_t)code;
+
+ while (cs_disasm_iter(handle, &cbuf, &size, &pc, insn)) {
+ cap_dump_insn(info, insn);
+ }
+ if (size != 0) {
+ info->fprintf_func(info->stream,
+ "Disassembler disagrees with TCG over instruction encoding\n"
+ "Please report this to qemu-devel@nongnu.org\n");
+ }
+
+ cs_close(&handle);
+ return true;
+}
+
+/* Disassemble COUNT insns at PC for the target. */
+bool cap_disas_monitor(disassemble_info *info, uint64_t pc, int count)
+{
+ uint8_t cap_buf[32];
+ csh handle;
+ cs_insn *insn;
+ size_t csize = 0;
+
+ if (cap_disas_start(info, &handle) != CS_ERR_OK) {
+ return false;
+ }
+ insn = cap_insn;
+
+ while (1) {
+ /*
+ * We want to read memory for one insn, but generically we do not
+ * know how much memory that is. We have a small buffer which is
+ * known to be sufficient for all supported targets. Try to not
+ * read beyond the page, Just In Case. For even more simplicity,
+ * ignore the actual target page size and use a 1k boundary. If
+ * that turns out to be insufficient, we'll come back around the
+ * loop and read more.
+ */
+ uint64_t epc = QEMU_ALIGN_UP(pc + csize + 1, 1024);
+ size_t tsize = MIN(sizeof(cap_buf) - csize, epc - pc);
+ const uint8_t *cbuf = cap_buf;
+
+ /* Make certain that we can make progress. */
+ assert(tsize != 0);
+ info->read_memory_func(pc, cap_buf + csize, tsize, info);
+ csize += tsize;
+
+ if (cs_disasm_iter(handle, &cbuf, &csize, &pc, insn)) {
+ cap_dump_insn(info, insn);
+ if (--count <= 0) {
+ break;
+ }
+ }
+ memmove(cap_buf, cbuf, csize);
+ }
+
+ cs_close(&handle);
+ return true;
+}
+
+/* Disassemble a single instruction directly into plugin output */
+bool cap_disas_plugin(disassemble_info *info, uint64_t pc, size_t size)
+{
+ uint8_t cap_buf[32];
+ const uint8_t *cbuf = cap_buf;
+ csh handle;
+
+ if (cap_disas_start(info, &handle) != CS_ERR_OK) {
+ return false;
+ }
+
+ assert(size < sizeof(cap_buf));
+ info->read_memory_func(pc, cap_buf, size, info);
+
+ if (cs_disasm_iter(handle, &cbuf, &size, &pc, cap_insn)) {
+ info->fprintf_func(info->stream, "%s %s",
+ cap_insn->mnemonic, cap_insn->op_str);
+ }
+
+ cs_close(&handle);
+ return true;
+}
diff --git a/disas/meson.build b/disas/meson.build
index bde8280c73..09a852742e 100644
--- a/disas/meson.build
+++ b/disas/meson.build
@@ -21,5 +21,6 @@ common_ss.add(when: 'CONFIG_S390_DIS', if_true: files('s390.c'))
common_ss.add(when: 'CONFIG_SH4_DIS', if_true: files('sh4.c'))
common_ss.add(when: 'CONFIG_SPARC_DIS', if_true: files('sparc.c'))
common_ss.add(when: 'CONFIG_XTENSA_DIS', if_true: files('xtensa.c'))
+common_ss.add(when: capstone, if_true: files('capstone.c'))
specific_ss.add(when: 'CONFIG_TCG_INTERPRETER', if_true: files('tci.c'))
--
2.25.1
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PULL 10/11] disas: Enable capstone disassembly for s390x
2020-09-22 17:47 [PULL 00/11] capstone + disassembler patch queue Richard Henderson
` (8 preceding siblings ...)
2020-09-22 17:47 ` [PULL 09/11] disas: Split out capstone code to disas/capstone.c Richard Henderson
@ 2020-09-22 17:47 ` Richard Henderson
2020-09-22 17:47 ` [PULL 11/11] disas/capstone: Add skipdata hook " Richard Henderson
` (2 subsequent siblings)
12 siblings, 0 replies; 16+ messages in thread
From: Richard Henderson @ 2020-09-22 17:47 UTC (permalink / raw)
To: qemu-devel; +Cc: peter.maydell, Thomas Huth, Alex Bennée
Enable s390x, aka SYSZ, in the git submodule build.
Set the capstone parameters for both s390x host and guest.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
meson.build | 11 +++++++++++
disas.c | 3 +++
target/s390x/cpu.c | 4 ++++
3 files changed, 18 insertions(+)
diff --git a/meson.build b/meson.build
index f06e3a1b65..d9f021837b 100644
--- a/meson.build
+++ b/meson.build
@@ -670,6 +670,17 @@ if capstone_opt == 'internal'
)
endif
+ if 'CONFIG_S390_DIS' in config_all_disas
+ capstone_data.set('CAPSTONE_HAS_SYSZ', '1')
+ capstone_files += files(
+ 'capstone/arch/SystemZ/SystemZDisassembler.c',
+ 'capstone/arch/SystemZ/SystemZInstPrinter.c',
+ 'capstone/arch/SystemZ/SystemZMapping.c',
+ 'capstone/arch/SystemZ/SystemZModule.c',
+ 'capstone/arch/SystemZ/SystemZMCTargetDesc.c'
+ )
+ endif
+
if 'CONFIG_I386_DIS' in config_all_disas
capstone_data.set('CAPSTONE_HAS_X86', 1)
capstone_files += files(
diff --git a/disas.c b/disas.c
index 9dfbeededc..7c18d7d2a7 100644
--- a/disas.c
+++ b/disas.c
@@ -203,6 +203,9 @@ static void initialize_debug_host(CPUDebug *s)
s->info.print_insn = print_insn_m68k;
#elif defined(__s390__)
s->info.print_insn = print_insn_s390;
+ s->info.cap_arch = CS_ARCH_SYSZ;
+ s->info.cap_insn_unit = 2;
+ s->info.cap_insn_split = 6;
#elif defined(__hppa__)
s->info.print_insn = print_insn_hppa;
#endif
diff --git a/target/s390x/cpu.c b/target/s390x/cpu.c
index e350edc9f5..f21b1f7795 100644
--- a/target/s390x/cpu.c
+++ b/target/s390x/cpu.c
@@ -44,6 +44,7 @@
#include "sysemu/tcg.h"
#endif
#include "fpu/softfloat-helpers.h"
+#include "disas/capstone.h"
#define CR0_RESET 0xE0UL
#define CR14_RESET 0xC2000000UL;
@@ -182,6 +183,9 @@ static void s390_cpu_disas_set_info(CPUState *cpu, disassemble_info *info)
{
info->mach = bfd_mach_s390_64;
info->print_insn = print_insn_s390;
+ info->cap_arch = CS_ARCH_SYSZ;
+ info->cap_insn_unit = 2;
+ info->cap_insn_split = 6;
}
static void s390_cpu_realizefn(DeviceState *dev, Error **errp)
--
2.25.1
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PULL 11/11] disas/capstone: Add skipdata hook for s390x
2020-09-22 17:47 [PULL 00/11] capstone + disassembler patch queue Richard Henderson
` (9 preceding siblings ...)
2020-09-22 17:47 ` [PULL 10/11] disas: Enable capstone disassembly for s390x Richard Henderson
@ 2020-09-22 17:47 ` Richard Henderson
2020-09-24 5:38 ` [PULL 00/11] capstone + disassembler patch queue Paolo Bonzini
2020-09-25 10:03 ` Peter Maydell
12 siblings, 0 replies; 16+ messages in thread
From: Richard Henderson @ 2020-09-22 17:47 UTC (permalink / raw)
To: qemu-devel
Cc: peter.maydell, Thomas Huth, Alex Bennée,
Philippe Mathieu-Daudé
It is always possible to tell the length of an insn, even if the
actual insn is unknown. Skip the correct number of bytes, so that
we stay in sync with the instruction stream.
Acked-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
disas/capstone.c | 42 +++++++++++++++++++++++++++++++++++++++++-
1 file changed, 41 insertions(+), 1 deletion(-)
diff --git a/disas/capstone.c b/disas/capstone.c
index b48f83958d..0a9ef9c892 100644
--- a/disas/capstone.c
+++ b/disas/capstone.c
@@ -16,6 +16,39 @@
*/
static __thread cs_insn *cap_insn;
+/*
+ * The capstone library always skips 2 bytes for S390X.
+ * This is less than ideal, since we can tell from the first two bits
+ * the size of the insn and thus stay in sync with the insn stream.
+ */
+static size_t CAPSTONE_API
+cap_skipdata_s390x_cb(const uint8_t *code, size_t code_size,
+ size_t offset, void *user_data)
+{
+ size_t ilen;
+
+ /* See get_ilen() in target/s390x/internal.h. */
+ switch (code[offset] >> 6) {
+ case 0:
+ ilen = 2;
+ break;
+ case 1:
+ case 2:
+ ilen = 4;
+ break;
+ default:
+ ilen = 6;
+ break;
+ }
+
+ return ilen;
+}
+
+static const cs_opt_skipdata cap_skipdata_s390x = {
+ .mnemonic = ".byte",
+ .callback = cap_skipdata_s390x_cb
+};
+
/*
* Initialize the Capstone library.
*
@@ -42,13 +75,20 @@ static cs_err cap_disas_start(disassemble_info *info, csh *handle)
/* "Disassemble" unknown insns as ".byte W,X,Y,Z". */
cs_option(*handle, CS_OPT_SKIPDATA, CS_OPT_ON);
- if (info->cap_arch == CS_ARCH_X86) {
+ switch (info->cap_arch) {
+ case CS_ARCH_SYSZ:
+ cs_option(*handle, CS_OPT_SKIPDATA_SETUP,
+ (uintptr_t)&cap_skipdata_s390x);
+ break;
+
+ case CS_ARCH_X86:
/*
* We don't care about errors (if for some reason the library
* is compiled without AT&T syntax); the user will just have
* to deal with the Intel syntax.
*/
cs_option(*handle, CS_OPT_SYNTAX, CS_OPT_SYNTAX_ATT);
+ break;
}
/* Allocate temp space for cs_disasm_iter. */
--
2.25.1
^ permalink raw reply related [flat|nested] 16+ messages in thread* Re: [PULL 00/11] capstone + disassembler patch queue
2020-09-22 17:47 [PULL 00/11] capstone + disassembler patch queue Richard Henderson
` (10 preceding siblings ...)
2020-09-22 17:47 ` [PULL 11/11] disas/capstone: Add skipdata hook " Richard Henderson
@ 2020-09-24 5:38 ` Paolo Bonzini
2020-09-25 10:03 ` Peter Maydell
12 siblings, 0 replies; 16+ messages in thread
From: Paolo Bonzini @ 2020-09-24 5:38 UTC (permalink / raw)
To: Richard Henderson, qemu-devel; +Cc: peter.maydell
On 22/09/20 19:47, Richard Henderson wrote:
> The following changes since commit 834b9273d5cdab68180dc8c84d641aaa4344b057:
>
> Merge remote-tracking branch 'remotes/vivier2/tags/trivial-branch-for-5.2-pull-request' into staging (2020-09-22 15:42:23 +0100)
>
> are available in the Git repository at:
>
> https://github.com/rth7680/qemu.git tags/pull-cap-20200922
>
> for you to fetch changes up to fcfea6ced053045beb1dc8d22bdeaacc9c03d0b9:
>
> disas/capstone: Add skipdata hook for s390x (2020-09-22 08:59:28 -0700)
>
> ----------------------------------------------------------------
> Update capstone submodule from v3.0.5 to v5 ("next").
> Convert submodule build to meson.
> Enable capstone disassembly for s390x.
> Code cleanups in disas.c
>
> ----------------------------------------------------------------
> Richard Henderson (11):
> capstone: Convert Makefile bits to meson bits
> capstone: Update to upstream "next" branch
> capstone: Require version 4.0 from a system library
> disas: Move host asm annotations to tb_gen_code
> disas: Clean up CPUDebug initialization
> disas: Use qemu/bswap.h for bfd endian loads
> disas: Cleanup plugin_disas
> disas: Configure capstone for aarch64 host without libvixl
> disas: Split out capstone code to disas/capstone.c
> disas: Enable capstone disassembly for s390x
> disas/capstone: Add skipdata hook for s390x
>
> configure | 64 +----
> Makefile | 16 --
> meson.build | 124 +++++++-
> include/disas/dis-asm.h | 104 +++----
> include/disas/disas.h | 2 +-
> include/exec/log.h | 4 +-
> accel/tcg/translate-all.c | 24 +-
> disas.c | 707 +++++++++++-----------------------------------
> disas/capstone.c | 326 +++++++++++++++++++++
> target/s390x/cpu.c | 4 +
> tcg/tcg.c | 4 +-
> capstone | 2 +-
> disas/meson.build | 1 +
> meson_options.txt | 4 +
> 14 files changed, 681 insertions(+), 705 deletions(-)
> create mode 100644 disas/capstone.c
>
I will pull this as well into my branch (as a kind of topic branch) to
avoid further conflicts.
Paolo
^ permalink raw reply [flat|nested] 16+ messages in thread* Re: [PULL 00/11] capstone + disassembler patch queue
2020-09-22 17:47 [PULL 00/11] capstone + disassembler patch queue Richard Henderson
` (11 preceding siblings ...)
2020-09-24 5:38 ` [PULL 00/11] capstone + disassembler patch queue Paolo Bonzini
@ 2020-09-25 10:03 ` Peter Maydell
2020-09-25 12:33 ` Paolo Bonzini
2020-09-25 14:30 ` Richard Henderson
12 siblings, 2 replies; 16+ messages in thread
From: Peter Maydell @ 2020-09-25 10:03 UTC (permalink / raw)
To: Richard Henderson; +Cc: QEMU Developers
On Tue, 22 Sep 2020 at 18:47, Richard Henderson
<richard.henderson@linaro.org> wrote:
>
> The following changes since commit 834b9273d5cdab68180dc8c84d641aaa4344b057:
>
> Merge remote-tracking branch 'remotes/vivier2/tags/trivial-branch-for-5.2-pull-request' into staging (2020-09-22 15:42:23 +0100)
>
> are available in the Git repository at:
>
> https://github.com/rth7680/qemu.git tags/pull-cap-20200922
>
> for you to fetch changes up to fcfea6ced053045beb1dc8d22bdeaacc9c03d0b9:
>
> disas/capstone: Add skipdata hook for s390x (2020-09-22 08:59:28 -0700)
>
> ----------------------------------------------------------------
> Update capstone submodule from v3.0.5 to v5 ("next").
> Convert submodule build to meson.
> Enable capstone disassembly for s390x.
> Code cleanups in disas.c
Fails to build:
Linux qemu01 4.15.0-72-generic s390x
From https://git-us.linaro.org/people/pmaydell/qemu-arm
8c1c07929f..a53ea1e6f9 staging -> pmaydell/staging
Fetching submodule capstone
From https://git.qemu.org/git/capstone
fc236325..4457d451 master -> origin/master
02af5976..2f38802e next -> origin/next
d57e7af3..7ca653c7 v4 -> origin/v4
* [new tag] 4.0.2 -> 4.0.2
make: Entering directory '/home/ubuntu/qemu/build/all'
config-host.mak is out-of-date, running configure
make: *** No rule to make target 'capstone/all', needed by 'Makefile'. Stop.
make: *** Waiting for unfinished jobs....
GIT ui/keycodemapdb tests/fp/berkeley-testfloat-3
tests/fp/berkeley-softfloat-3 meson dtc capstone slirp roms/SLOF
cross containers no
NOTE: guest cross-compilers enabled: cc cc
make: Leaving directory '/home/ubuntu/qemu/build/all'
thanks
-- PMM
^ permalink raw reply [flat|nested] 16+ messages in thread* Re: [PULL 00/11] capstone + disassembler patch queue
2020-09-25 10:03 ` Peter Maydell
@ 2020-09-25 12:33 ` Paolo Bonzini
2020-09-25 14:30 ` Richard Henderson
1 sibling, 0 replies; 16+ messages in thread
From: Paolo Bonzini @ 2020-09-25 12:33 UTC (permalink / raw)
To: Peter Maydell, Richard Henderson; +Cc: QEMU Developers
On 25/09/20 12:03, Peter Maydell wrote:
>
> Linux qemu01 4.15.0-72-generic s390x
> From https://git-us.linaro.org/people/pmaydell/qemu-arm
> 8c1c07929f..a53ea1e6f9 staging -> pmaydell/staging
> Fetching submodule capstone
> From https://git.qemu.org/git/capstone
> fc236325..4457d451 master -> origin/master
> 02af5976..2f38802e next -> origin/next
> d57e7af3..7ca653c7 v4 -> origin/v4
> * [new tag] 4.0.2 -> 4.0.2
> make: Entering directory '/home/ubuntu/qemu/build/all'
> config-host.mak is out-of-date, running configure
> make: *** No rule to make target 'capstone/all', needed by 'Makefile'. Stop.
> make: *** Waiting for unfinished jobs....
> GIT ui/keycodemapdb tests/fp/berkeley-testfloat-3
> tests/fp/berkeley-softfloat-3 meson dtc capstone slirp roms/SLOF
> cross containers no
I think this is just temporary and running "make" again would fix it.
It can be worked around too, though.
Paolo
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [PULL 00/11] capstone + disassembler patch queue
2020-09-25 10:03 ` Peter Maydell
2020-09-25 12:33 ` Paolo Bonzini
@ 2020-09-25 14:30 ` Richard Henderson
1 sibling, 0 replies; 16+ messages in thread
From: Richard Henderson @ 2020-09-25 14:30 UTC (permalink / raw)
To: Peter Maydell; +Cc: QEMU Developers
On 9/25/20 3:03 AM, Peter Maydell wrote:
> make: Entering directory '/home/ubuntu/qemu/build/all'
> config-host.mak is out-of-date, running configure
> make: *** No rule to make target 'capstone/all', needed by 'Makefile'. Stop.
> make: *** Waiting for unfinished jobs....
Incremental build fails the first time, yes.
Running make a second time succeeds.
r~
^ permalink raw reply [flat|nested] 16+ messages in thread