From: Dmitry Fomichev <dmitry.fomichev@wdc.com>
To: "Keith Busch" <kbusch@kernel.org>,
"Klaus Jensen" <k.jensen@samsung.com>,
"Kevin Wolf" <kwolf@redhat.com>,
"Philippe Mathieu-Daudé" <philmd@redhat.com>,
"Maxim Levitsky" <mlevitsk@redhat.com>,
"Fam Zheng" <fam@euphon.net>
Cc: Niklas Cassel <niklas.cassel@wdc.com>,
Damien Le Moal <damien.lemoal@wdc.com>,
qemu-block@nongnu.org, Dmitry Fomichev <dmitry.fomichev@wdc.com>,
qemu-devel@nongnu.org,
Alistair Francis <alistair.francis@wdc.com>,
Matias Bjorling <matias.bjorling@wdc.com>
Subject: [PATCH v4 11/14] hw/block/nvme: Support Zone Descriptor Extensions
Date: Thu, 24 Sep 2020 03:20:18 +0900 [thread overview]
Message-ID: <20200923182021.3724-12-dmitry.fomichev@wdc.com> (raw)
In-Reply-To: <20200923182021.3724-1-dmitry.fomichev@wdc.com>
Zone Descriptor Extension is a label that can be assigned to a zone.
It can be set to an Empty zone and it stays assigned until the zone
is reset.
This commit adds a new optional module property, "zone_descr_ext_size".
Its value must be a multiple of 64 bytes. If this value is non-zero,
it becomes possible to assign extensions of that size to any Empty
zones. The default value for this property is 0, therefore setting
extensions is disabled by default.
Signed-off-by: Hans Holmberg <hans.holmberg@wdc.com>
Signed-off-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
---
hw/block/nvme.c | 73 ++++++++++++++++++++++++++++++++++++++++++++++---
hw/block/nvme.h | 8 ++++++
2 files changed, 77 insertions(+), 4 deletions(-)
diff --git a/hw/block/nvme.c b/hw/block/nvme.c
index 3f397a3ea7..cfa791aa72 100644
--- a/hw/block/nvme.c
+++ b/hw/block/nvme.c
@@ -1400,6 +1400,26 @@ static bool nvme_cond_offline_all(uint8_t state)
return state == NVME_ZONE_STATE_READ_ONLY;
}
+static uint16_t nvme_set_zd_ext(NvmeCtrl *n, NvmeNamespace *ns,
+ NvmeZone *zone, uint8_t state)
+{
+ uint16_t status;
+
+ if (state == NVME_ZONE_STATE_EMPTY) {
+ nvme_auto_transition_zone(n, ns, false, true);
+ status = nvme_aor_check(n, ns, 1, 0);
+ if (status != NVME_SUCCESS) {
+ return status;
+ }
+ nvme_aor_inc_active(n, ns);
+ zone->d.za |= NVME_ZA_ZD_EXT_VALID;
+ nvme_assign_zone_state(n, ns, zone, NVME_ZONE_STATE_CLOSED);
+ return NVME_SUCCESS;
+ }
+
+ return NVME_ZONE_INVAL_TRANSITION;
+}
+
typedef uint16_t (*op_handler_t)(NvmeCtrl *, NvmeNamespace *, NvmeZone *,
uint8_t);
typedef bool (*need_to_proc_zone_t)(uint8_t);
@@ -1434,12 +1454,14 @@ static uint16_t nvme_zone_mgmt_send(NvmeCtrl *n, NvmeRequest *req)
NvmeCmd *cmd = (NvmeCmd *)&req->cmd;
NvmeNamespace *ns = req->ns;
uint32_t dw13 = le32_to_cpu(cmd->cdw13);
+ uint64_t prp1, prp2;
uint64_t slba = 0;
uint32_t zone_idx = 0;
uint16_t status;
uint8_t action, state;
bool all;
NvmeZone *zone;
+ uint8_t *zd_ext;
action = dw13 & 0xff;
all = dw13 & 0x100;
@@ -1494,7 +1516,24 @@ static uint16_t nvme_zone_mgmt_send(NvmeCtrl *n, NvmeRequest *req)
case NVME_ZONE_ACTION_SET_ZD_EXT:
trace_pci_nvme_set_descriptor_extension(slba, zone_idx);
- return NVME_INVALID_FIELD | NVME_DNR;
+ if (all || !n->params.zd_extension_size) {
+ return NVME_INVALID_FIELD | NVME_DNR;
+ }
+ zd_ext = nvme_get_zd_extension(n, ns, zone_idx);
+ prp1 = le64_to_cpu(cmd->dptr.prp1);
+ prp2 = le64_to_cpu(cmd->dptr.prp2);
+ status = nvme_dma_prp(n, zd_ext, n->params.zd_extension_size,
+ prp1, prp2, DMA_DIRECTION_TO_DEVICE, req);
+ if (status) {
+ trace_pci_nvme_err_zd_extension_map_error(zone_idx);
+ return status;
+ }
+
+ status = nvme_set_zd_ext(n, ns, zone, state);
+ if (status == NVME_SUCCESS) {
+ trace_pci_nvme_zd_extension_set(zone_idx);
+ return status;
+ }
break;
default:
@@ -1574,7 +1613,7 @@ static uint16_t nvme_zone_mgmt_recv(NvmeCtrl *n, NvmeRequest *req)
return NVME_INVALID_FIELD | NVME_DNR;
}
- if (zra == NVME_ZONE_REPORT_EXTENDED) {
+ if (zra == NVME_ZONE_REPORT_EXTENDED && !n->params.zd_extension_size) {
return NVME_INVALID_FIELD | NVME_DNR;
}
@@ -1586,6 +1625,9 @@ static uint16_t nvme_zone_mgmt_recv(NvmeCtrl *n, NvmeRequest *req)
partial = (dw13 >> 16) & 0x01;
zone_entry_sz = sizeof(NvmeZoneDescr);
+ if (zra == NVME_ZONE_REPORT_EXTENDED) {
+ zone_entry_sz += n->params.zd_extension_size;
+ }
max_zones = (len - sizeof(NvmeZoneReportHeader)) / zone_entry_sz;
buf = g_malloc0(len);
@@ -1617,6 +1659,14 @@ static uint16_t nvme_zone_mgmt_recv(NvmeCtrl *n, NvmeRequest *req)
z->wp = cpu_to_le64(~0ULL);
}
+ if (zra == NVME_ZONE_REPORT_EXTENDED) {
+ if (zs->d.za & NVME_ZA_ZD_EXT_VALID) {
+ memcpy(buf_p, nvme_get_zd_extension(n, ns, zone_idx),
+ n->params.zd_extension_size);
+ }
+ buf_p += n->params.zd_extension_size;
+ }
+
zone_idx++;
}
@@ -2727,7 +2777,6 @@ static uint16_t nvme_aer(NvmeCtrl *n, NvmeRequest *req)
n->aer_reqs[n->outstanding_aers] = req;
n->outstanding_aers++;
-
if (!QTAILQ_EMPTY(&n->aer_queue)) {
nvme_process_aers(n);
}
@@ -3361,6 +3410,7 @@ static int nvme_init_zone_meta(NvmeCtrl *n, NvmeNamespace *ns,
ns->imp_open_zones = g_malloc0(sizeof(NvmeZoneList));
ns->closed_zones = g_malloc0(sizeof(NvmeZoneList));
ns->full_zones = g_malloc0(sizeof(NvmeZoneList));
+ ns->zd_extensions = g_malloc0(n->params.zd_extension_size * n->num_zones);
zone = ns->zone_array;
nvme_init_zone_list(ns->exp_open_zones);
@@ -3434,6 +3484,17 @@ static void nvme_zoned_init_ctrl(NvmeCtrl *n, Error **errp)
" adjusting", n->params.max_active_zones, nz);
n->params.max_active_zones = nz;
}
+ if (n->params.zd_extension_size) {
+ if (n->params.zd_extension_size & 0x3f) {
+ error_setg(errp,
+ "zone descriptor extension size must be a multiple of 64B");
+ return;
+ }
+ if ((n->params.zd_extension_size >> 6) > 0xff) {
+ error_setg(errp, "zone descriptor extension size is too large");
+ return;
+ }
+ }
return;
}
@@ -3458,7 +3519,8 @@ static int nvme_zoned_init_ns(NvmeCtrl *n, NvmeNamespace *ns, int lba_index,
ns->id_ns_zoned->ozcs = n->params.cross_zone_read ? 0x01 : 0x00;
ns->id_ns_zoned->lbafe[lba_index].zsze = cpu_to_le64(n->zone_size);
- ns->id_ns_zoned->lbafe[lba_index].zdes = 0;
+ ns->id_ns_zoned->lbafe[lba_index].zdes =
+ n->params.zd_extension_size >> 6; /* Units of 64B */
if (n->params.fill_pattern == 0) {
ns->id_ns.dlfeat = 0x01;
@@ -3481,6 +3543,7 @@ static void nvme_zoned_clear(NvmeCtrl *n)
g_free(ns->imp_open_zones);
g_free(ns->closed_zones);
g_free(ns->full_zones);
+ g_free(ns->zd_extensions);
}
}
@@ -3849,6 +3912,8 @@ static Property nvme_props[] = {
NVME_DEFAULT_ZONE_SIZE),
DEFINE_PROP_UINT64("zone_capacity", NvmeCtrl, params.zone_capacity_mb, 0),
DEFINE_PROP_UINT32("zone_append_size_limit", NvmeCtrl, params.zasl_kb, 0),
+ DEFINE_PROP_UINT32("zone_descr_ext_size", NvmeCtrl,
+ params.zd_extension_size, 0),
DEFINE_PROP_UINT32("max_active", NvmeCtrl, params.max_active_zones, 0),
DEFINE_PROP_UINT32("max_open", NvmeCtrl, params.max_open_zones, 0),
DEFINE_PROP_BOOL("cross_zone_read", NvmeCtrl, params.cross_zone_read, true),
diff --git a/hw/block/nvme.h b/hw/block/nvme.h
index 6efd566cb2..0e82fca815 100644
--- a/hw/block/nvme.h
+++ b/hw/block/nvme.h
@@ -24,6 +24,7 @@ typedef struct NvmeParams {
uint64_t zone_capacity_mb;
uint32_t max_active_zones;
uint32_t max_open_zones;
+ uint32_t zd_extension_size;
} NvmeParams;
typedef struct NvmeAsyncEvent {
@@ -105,6 +106,7 @@ typedef struct NvmeNamespace {
NvmeZoneList *imp_open_zones;
NvmeZoneList *closed_zones;
NvmeZoneList *full_zones;
+ uint8_t *zd_extensions;
int32_t nr_open_zones;
int32_t nr_active_zones;
} NvmeNamespace;
@@ -218,6 +220,12 @@ static inline bool nvme_wp_is_valid(NvmeZone *zone)
st != NVME_ZONE_STATE_OFFLINE;
}
+static inline uint8_t *nvme_get_zd_extension(NvmeCtrl *n, NvmeNamespace *ns,
+ uint32_t zone_idx)
+{
+ return &ns->zd_extensions[zone_idx * n->params.zd_extension_size];
+}
+
/*
* Initialize a zone list head.
*/
--
2.21.0
next prev parent reply other threads:[~2020-09-23 18:39 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-09-23 18:20 [PATCH v4 00/14] hw/block/nvme: Support Namespace Types and Zoned Namespace Command Set Dmitry Fomichev
2020-09-23 18:20 ` [PATCH v4 01/14] hw/block/nvme: Report actual LBA data shift in LBAF Dmitry Fomichev
2020-09-24 12:12 ` Klaus Jensen
2020-09-23 18:20 ` [PATCH v4 02/14] hw/block/nvme: Add Commands Supported and Effects log Dmitry Fomichev
2020-09-23 18:20 ` [PATCH v4 03/14] hw/block/nvme: Introduce the Namespace Types definitions Dmitry Fomichev
2020-09-23 18:20 ` [PATCH v4 04/14] hw/block/nvme: Define trace events related to NS Types Dmitry Fomichev
2020-09-23 18:20 ` [PATCH v4 05/14] hw/block/nvme: Add support for Namespace Types Dmitry Fomichev
2020-09-23 18:20 ` [PATCH v4 06/14] hw/block/nvme: Add support for active/inactive namespaces Dmitry Fomichev
2020-09-24 12:12 ` Klaus Jensen
2020-09-24 18:17 ` Niklas Cassel
2020-09-24 18:55 ` Klaus Jensen
2020-09-24 19:40 ` Niklas Cassel
2020-09-23 18:20 ` [PATCH v4 07/14] hw/block/nvme: Make Zoned NS Command Set definitions Dmitry Fomichev
2020-09-23 18:20 ` [PATCH v4 08/14] hw/block/nvme: Define Zoned NS Command Set trace events Dmitry Fomichev
2020-09-23 18:20 ` [PATCH v4 09/14] hw/block/nvme: Support Zoned Namespace Command Set Dmitry Fomichev
2020-09-25 18:24 ` Klaus Jensen
2020-09-23 18:20 ` [PATCH v4 10/14] hw/block/nvme: Introduce max active and open zone limits Dmitry Fomichev
2020-09-23 18:20 ` Dmitry Fomichev [this message]
2020-09-23 18:20 ` [PATCH v4 12/14] hw/block/nvme: Add injection of Offline/Read-Only zones Dmitry Fomichev
2020-09-23 18:20 ` [PATCH v4 13/14] hw/block/nvme: Use zone metadata file for persistence Dmitry Fomichev
2020-09-23 18:20 ` [PATCH v4 14/14] hw/block/nvme: Document zoned parameters in usage text Dmitry Fomichev
2020-09-24 21:07 ` [PATCH v4 00/14] hw/block/nvme: Support Namespace Types and Zoned Namespace Command Set Klaus Jensen
2020-09-28 2:33 ` Dmitry Fomichev
2020-09-28 6:36 ` Klaus Jensen
2020-09-28 21:25 ` Keith Busch
2020-09-28 22:54 ` Damien Le Moal
2020-09-29 10:46 ` Klaus Jensen
2020-09-29 11:13 ` Damien Le Moal
2020-09-29 17:44 ` Keith Busch
2020-09-29 15:43 ` Dmitry Fomichev
2020-09-29 16:36 ` Klaus Jensen
2020-09-29 17:29 ` Keith Busch
2020-09-29 18:00 ` Klaus Jensen
2020-09-29 18:15 ` Keith Busch
2020-09-29 18:18 ` Klaus Jensen
2020-09-29 18:17 ` Matias Bjorling
2020-09-29 18:36 ` Klaus Jensen
2020-09-29 19:42 ` Matias Bjorling
2020-09-29 15:42 ` Dmitry Fomichev
2020-09-29 18:39 ` Klaus Jensen
2020-09-29 19:22 ` Keith Busch
2020-09-29 19:53 ` Dmitry Fomichev
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200923182021.3724-12-dmitry.fomichev@wdc.com \
--to=dmitry.fomichev@wdc.com \
--cc=alistair.francis@wdc.com \
--cc=damien.lemoal@wdc.com \
--cc=fam@euphon.net \
--cc=k.jensen@samsung.com \
--cc=kbusch@kernel.org \
--cc=kwolf@redhat.com \
--cc=matias.bjorling@wdc.com \
--cc=mlevitsk@redhat.com \
--cc=niklas.cassel@wdc.com \
--cc=philmd@redhat.com \
--cc=qemu-block@nongnu.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).