[RFC PATCH v3 2/7] hw/i386/acpi-build: Add ACPI PCI hot-plug methods to Q35

[Julia Suvorova <jusual@redhat.com>]

Implement notifications and gpe to support q35 ACPI PCI hot-plug.
Use 0xcc4 - 0xcd7 range for 'acpi-pci-hotplug' io ports.

Signed-off-by: Julia Suvorova <jusual@redhat.com>
---
 hw/i386/acpi-build.h    |  4 ++++
 include/hw/acpi/ich9.h  |  2 ++
 include/hw/acpi/pcihp.h |  3 ++-
 hw/acpi/pcihp.c         |  8 ++++----
 hw/acpi/piix4.c         |  4 +++-
 hw/i386/acpi-build.c    | 27 ++++++++++++++++-----------
 6 files changed, 31 insertions(+), 17 deletions(-)

diff --git a/hw/i386/acpi-build.h b/hw/i386/acpi-build.h
index 74df5fc612..487ec7710f 100644
--- a/hw/i386/acpi-build.h
+++ b/hw/i386/acpi-build.h
@@ -5,6 +5,10 @@
 
 extern const struct AcpiGenericAddress x86_nvdimm_acpi_dsmio;
 
+/* PCI Hot-plug registers bases. See docs/spec/acpi_pci_hotplug.txt */
+#define ACPI_PCIHP_SEJ_BASE 0x8
+#define ACPI_PCIHP_BNMR_BASE 0x10
+
 void acpi_setup(void);
 
 #endif
diff --git a/include/hw/acpi/ich9.h b/include/hw/acpi/ich9.h
index 28a53181cb..4d19571ed7 100644
--- a/include/hw/acpi/ich9.h
+++ b/include/hw/acpi/ich9.h
@@ -28,6 +28,8 @@
 #include "hw/acpi/acpi_dev_interface.h"
 #include "hw/acpi/tco.h"
 
+#define ACPI_PCIHP_ADDR_ICH9 0x0cc4
+
 typedef struct ICH9LPCPMRegs {
     /*
      * In ich9 spec says that pm1_cnt register is 32bit width and
diff --git a/include/hw/acpi/pcihp.h b/include/hw/acpi/pcihp.h
index 02f4665767..ce49fb03b9 100644
--- a/include/hw/acpi/pcihp.h
+++ b/include/hw/acpi/pcihp.h
@@ -54,7 +54,8 @@ typedef struct AcpiPciHpState {
 } AcpiPciHpState;
 
 void acpi_pcihp_init(Object *owner, AcpiPciHpState *, PCIBus *root,
-                     MemoryRegion *address_space_io, bool bridges_enabled);
+                     MemoryRegion *address_space_io, bool bridges_enabled,
+                     uint16_t io_base);
 
 void acpi_pcihp_device_pre_plug_cb(HotplugHandler *hotplug_dev,
                                    DeviceState *dev, Error **errp);
diff --git a/hw/acpi/pcihp.c b/hw/acpi/pcihp.c
index ff23104aea..bb457bc279 100644
--- a/hw/acpi/pcihp.c
+++ b/hw/acpi/pcihp.c
@@ -38,7 +38,6 @@
 #include "qom/qom-qobject.h"
 #include "trace.h"
 
-#define ACPI_PCIHP_ADDR 0xae00
 #define ACPI_PCIHP_SIZE 0x0014
 #define PCI_UP_BASE 0x0000
 #define PCI_DOWN_BASE 0x0004
@@ -381,12 +380,13 @@ static const MemoryRegionOps acpi_pcihp_io_ops = {
 };
 
 void acpi_pcihp_init(Object *owner, AcpiPciHpState *s, PCIBus *root_bus,
-                     MemoryRegion *address_space_io, bool bridges_enabled)
+                     MemoryRegion *address_space_io, bool bridges_enabled,
+                     uint16_t io_base)
 {
     s->io_len = ACPI_PCIHP_SIZE;
-    s->io_base = ACPI_PCIHP_ADDR;
+    s->io_base = io_base;
 
-    s->root= root_bus;
+    s->root = root_bus;
     s->legacy_piix = !bridges_enabled;
 
     memory_region_init_io(&s->io, owner, &acpi_pcihp_io_ops, s,
diff --git a/hw/acpi/piix4.c b/hw/acpi/piix4.c
index 832f8fba82..a505ab5bcf 100644
--- a/hw/acpi/piix4.c
+++ b/hw/acpi/piix4.c
@@ -50,6 +50,8 @@
 #define GPE_BASE 0xafe0
 #define GPE_LEN 4
 
+#define ACPI_PCIHP_ADDR_PIIX4 0xae00
+
 struct pci_status {
     uint32_t up; /* deprecated, maintained for migration compatibility */
     uint32_t down;
@@ -597,7 +599,7 @@ static void piix4_acpi_system_hot_add_init(MemoryRegion *parent,
     memory_region_add_subregion(parent, GPE_BASE, &s->io_gpe);
 
     acpi_pcihp_init(OBJECT(s), &s->acpi_pci_hotplug, bus, parent,
-                    s->use_acpi_hotplug_bridge);
+                    s->use_acpi_hotplug_bridge, ACPI_PCIHP_ADDR_PIIX4);
 
     s->cpu_hotplug_legacy = true;
     object_property_add_bool(OBJECT(s), "cpu-hotplug-legacy",
diff --git a/hw/i386/acpi-build.c b/hw/i386/acpi-build.c
index 0e0535d2e3..cf503b16af 100644
--- a/hw/i386/acpi-build.c
+++ b/hw/i386/acpi-build.c
@@ -201,10 +201,6 @@ static void acpi_get_pm_info(MachineState *machine, AcpiPmInfo *pm)
         /* w2k requires FADT(rev1) or it won't boot, keep PC compatible */
         pm->fadt.rev = 1;
         pm->cpu_hp_io_base = PIIX4_CPU_HOTPLUG_IO_BASE;
-        pm->pcihp_io_base =
-            object_property_get_uint(obj, ACPI_PCIHP_IO_BASE_PROP, NULL);
-        pm->pcihp_io_len =
-            object_property_get_uint(obj, ACPI_PCIHP_IO_LEN_PROP, NULL);
     }
     if (lpc) {
         struct AcpiGenericAddress r = { .space_id = AML_AS_SYSTEM_IO,
@@ -214,6 +210,10 @@ static void acpi_get_pm_info(MachineState *machine, AcpiPmInfo *pm)
         pm->fadt.flags |= 1 << ACPI_FADT_F_RESET_REG_SUP;
         pm->cpu_hp_io_base = ICH9_CPU_HOTPLUG_IO_BASE;
     }
+    pm->pcihp_io_base =
+        object_property_get_uint(obj, ACPI_PCIHP_IO_BASE_PROP, NULL);
+    pm->pcihp_io_len =
+        object_property_get_uint(obj, ACPI_PCIHP_IO_LEN_PROP, NULL);
 
     /* The above need not be conditional on machine type because the reset port
      * happens to be the same on PIIX (pc) and ICH9 (q35). */
@@ -472,7 +472,7 @@ static void build_append_pci_bus_devices(Aml *parent_scope, PCIBus *bus,
         QLIST_FOREACH(sec, &bus->child, sibling) {
             int32_t devfn = sec->parent_dev->devfn;
 
-            if (pci_bus_is_root(sec) || pci_bus_is_express(sec)) {
+            if (pci_bus_is_root(sec)) {
                 continue;
             }
 
@@ -1368,7 +1368,7 @@ static void build_piix4_isa_bridge(Aml *table)
     aml_append(table, scope);
 }
 
-static void build_piix4_pci_hotplug(Aml *table)
+static void build_x86_pci_hotplug(Aml *table, uint64_t pcihp_addr)
 {
     Aml *scope;
     Aml *field;
@@ -1377,20 +1377,22 @@ static void build_piix4_pci_hotplug(Aml *table)
     scope =  aml_scope("_SB.PCI0");
 
     aml_append(scope,
-        aml_operation_region("PCST", AML_SYSTEM_IO, aml_int(0xae00), 0x08));
+        aml_operation_region("PCST", AML_SYSTEM_IO, aml_int(pcihp_addr), 0x08));
     field = aml_field("PCST", AML_DWORD_ACC, AML_NOLOCK, AML_WRITE_AS_ZEROS);
     aml_append(field, aml_named_field("PCIU", 32));
     aml_append(field, aml_named_field("PCID", 32));
     aml_append(scope, field);
 
     aml_append(scope,
-        aml_operation_region("SEJ", AML_SYSTEM_IO, aml_int(0xae08), 0x04));
+    aml_operation_region("SEJ", AML_SYSTEM_IO,
+                         aml_int(pcihp_addr + ACPI_PCIHP_SEJ_BASE), 0x04));
     field = aml_field("SEJ", AML_DWORD_ACC, AML_NOLOCK, AML_WRITE_AS_ZEROS);
     aml_append(field, aml_named_field("B0EJ", 32));
     aml_append(scope, field);
 
     aml_append(scope,
-        aml_operation_region("BNMR", AML_SYSTEM_IO, aml_int(0xae10), 0x04));
+        aml_operation_region("BNMR", AML_SYSTEM_IO,
+                             aml_int(pcihp_addr + ACPI_PCIHP_BNMR_BASE), 0x04));
     field = aml_field("BNMR", AML_DWORD_ACC, AML_NOLOCK, AML_WRITE_AS_ZEROS);
     aml_append(field, aml_named_field("BNUM", 32));
     aml_append(scope, field);
@@ -1504,7 +1506,7 @@ build_dsdt(GArray *table_data, BIOSLinker *linker,
         build_hpet_aml(dsdt);
         build_piix4_isa_bridge(dsdt);
         build_isa_devices_aml(dsdt);
-        build_piix4_pci_hotplug(dsdt);
+        build_x86_pci_hotplug(dsdt, pm->pcihp_io_base);
         build_piix4_pci0_int(dsdt);
     } else {
         sb_scope = aml_scope("_SB");
@@ -1520,6 +1522,9 @@ build_dsdt(GArray *table_data, BIOSLinker *linker,
         build_hpet_aml(dsdt);
         build_q35_isa_bridge(dsdt);
         build_isa_devices_aml(dsdt);
+        if (pm->pcihp_bridge_en) {
+            build_x86_pci_hotplug(dsdt, pm->pcihp_io_base);
+        }
         build_q35_pci0_int(dsdt);
         if (pcms->smbus && !pcmc->do_not_add_smb_acpi) {
             build_smb0(dsdt, pcms->smbus, ICH9_SMB_DEV, ICH9_SMB_FUNC);
@@ -1546,7 +1551,7 @@ build_dsdt(GArray *table_data, BIOSLinker *linker,
     {
         aml_append(scope, aml_name_decl("_HID", aml_string("ACPI0006")));
 
-        if (misc->is_piix4) {
+        if (misc->is_piix4 || pm->pcihp_bridge_en) {
             method = aml_method("_E01", 0, AML_NOTSERIALIZED);
             aml_append(method,
                 aml_acquire(aml_name("\\_SB.PCI0.BLCK"), 0xFFFF));
-- 
2.25.4