qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Igor Mammedov <imammedo@redhat.com>
To: Julia Suvorova <jusual@redhat.com>
Cc: Ani Sinha <ani@anisinha.ca>, Gerd Hoffmann <kraxel@redhat.com>,
	qemu-devel@nongnu.org, "Michael S. Tsirkin" <mst@redhat.com>
Subject: Re: [RFC PATCH v3 2/7] hw/i386/acpi-build: Add ACPI PCI hot-plug methods to Q35
Date: Thu, 24 Sep 2020 13:04:19 +0200	[thread overview]
Message-ID: <20200924130419.47b68e4d@redhat.com> (raw)
In-Reply-To: <20200924070013.165026-3-jusual@redhat.com>

On Thu, 24 Sep 2020 09:00:08 +0200
Julia Suvorova <jusual@redhat.com> wrote:

> Implement notifications and gpe to support q35 ACPI PCI hot-plug.
> Use 0xcc4 - 0xcd7 range for 'acpi-pci-hotplug' io ports.

Gerd,

does picked IO range looks acceptable to you?


> Signed-off-by: Julia Suvorova <jusual@redhat.com>
with minor nits below fixed:

 Reviewed-by: Igor Mammedov <imammedo@redhat.com>


> ---
>  hw/i386/acpi-build.h    |  4 ++++
>  include/hw/acpi/ich9.h  |  2 ++
>  include/hw/acpi/pcihp.h |  3 ++-
>  hw/acpi/pcihp.c         |  8 ++++----
>  hw/acpi/piix4.c         |  4 +++-
>  hw/i386/acpi-build.c    | 27 ++++++++++++++++-----------
>  6 files changed, 31 insertions(+), 17 deletions(-)
> 
> diff --git a/hw/i386/acpi-build.h b/hw/i386/acpi-build.h
> index 74df5fc612..487ec7710f 100644
> --- a/hw/i386/acpi-build.h
> +++ b/hw/i386/acpi-build.h
> @@ -5,6 +5,10 @@
>  
>  extern const struct AcpiGenericAddress x86_nvdimm_acpi_dsmio;
>  
> +/* PCI Hot-plug registers bases. See docs/spec/acpi_pci_hotplug.txt */
> +#define ACPI_PCIHP_SEJ_BASE 0x8
> +#define ACPI_PCIHP_BNMR_BASE 0x10
> +
>  void acpi_setup(void);
>  
>  #endif
> diff --git a/include/hw/acpi/ich9.h b/include/hw/acpi/ich9.h
> index 28a53181cb..4d19571ed7 100644
> --- a/include/hw/acpi/ich9.h
> +++ b/include/hw/acpi/ich9.h
> @@ -28,6 +28,8 @@
>  #include "hw/acpi/acpi_dev_interface.h"
>  #include "hw/acpi/tco.h"
>  
> +#define ACPI_PCIHP_ADDR_ICH9 0x0cc4
> +
>  typedef struct ICH9LPCPMRegs {
>      /*
>       * In ich9 spec says that pm1_cnt register is 32bit width and
> diff --git a/include/hw/acpi/pcihp.h b/include/hw/acpi/pcihp.h
> index 02f4665767..ce49fb03b9 100644
> --- a/include/hw/acpi/pcihp.h
> +++ b/include/hw/acpi/pcihp.h
> @@ -54,7 +54,8 @@ typedef struct AcpiPciHpState {
>  } AcpiPciHpState;
>  
>  void acpi_pcihp_init(Object *owner, AcpiPciHpState *, PCIBus *root,
> -                     MemoryRegion *address_space_io, bool bridges_enabled);
> +                     MemoryRegion *address_space_io, bool bridges_enabled,
> +                     uint16_t io_base);
>  
>  void acpi_pcihp_device_pre_plug_cb(HotplugHandler *hotplug_dev,
>                                     DeviceState *dev, Error **errp);
> diff --git a/hw/acpi/pcihp.c b/hw/acpi/pcihp.c
> index ff23104aea..bb457bc279 100644
> --- a/hw/acpi/pcihp.c
> +++ b/hw/acpi/pcihp.c
> @@ -38,7 +38,6 @@
>  #include "qom/qom-qobject.h"
>  #include "trace.h"
>  
> -#define ACPI_PCIHP_ADDR 0xae00
>  #define ACPI_PCIHP_SIZE 0x0014
>  #define PCI_UP_BASE 0x0000
>  #define PCI_DOWN_BASE 0x0004
> @@ -381,12 +380,13 @@ static const MemoryRegionOps acpi_pcihp_io_ops = {
>  };
>  
>  void acpi_pcihp_init(Object *owner, AcpiPciHpState *s, PCIBus *root_bus,
> -                     MemoryRegion *address_space_io, bool bridges_enabled)
> +                     MemoryRegion *address_space_io, bool bridges_enabled,
> +                     uint16_t io_base)
>  {
>      s->io_len = ACPI_PCIHP_SIZE;
> -    s->io_base = ACPI_PCIHP_ADDR;
> +    s->io_base = io_base;
>  
> -    s->root= root_bus;
> +    s->root = root_bus;
>      s->legacy_piix = !bridges_enabled;
>  
>      memory_region_init_io(&s->io, owner, &acpi_pcihp_io_ops, s,
> diff --git a/hw/acpi/piix4.c b/hw/acpi/piix4.c
> index 832f8fba82..a505ab5bcf 100644
> --- a/hw/acpi/piix4.c
> +++ b/hw/acpi/piix4.c
> @@ -50,6 +50,8 @@
>  #define GPE_BASE 0xafe0
>  #define GPE_LEN 4
>  
> +#define ACPI_PCIHP_ADDR_PIIX4 0xae00
> +
>  struct pci_status {
>      uint32_t up; /* deprecated, maintained for migration compatibility */
>      uint32_t down;
> @@ -597,7 +599,7 @@ static void piix4_acpi_system_hot_add_init(MemoryRegion *parent,
>      memory_region_add_subregion(parent, GPE_BASE, &s->io_gpe);
>  
>      acpi_pcihp_init(OBJECT(s), &s->acpi_pci_hotplug, bus, parent,
> -                    s->use_acpi_hotplug_bridge);
> +                    s->use_acpi_hotplug_bridge, ACPI_PCIHP_ADDR_PIIX4);
>  
>      s->cpu_hotplug_legacy = true;
>      object_property_add_bool(OBJECT(s), "cpu-hotplug-legacy",
> diff --git a/hw/i386/acpi-build.c b/hw/i386/acpi-build.c
> index 0e0535d2e3..cf503b16af 100644
> --- a/hw/i386/acpi-build.c
> +++ b/hw/i386/acpi-build.c
> @@ -201,10 +201,6 @@ static void acpi_get_pm_info(MachineState *machine, AcpiPmInfo *pm)
>          /* w2k requires FADT(rev1) or it won't boot, keep PC compatible */
>          pm->fadt.rev = 1;
>          pm->cpu_hp_io_base = PIIX4_CPU_HOTPLUG_IO_BASE;
> -        pm->pcihp_io_base =
> -            object_property_get_uint(obj, ACPI_PCIHP_IO_BASE_PROP, NULL);
> -        pm->pcihp_io_len =
> -            object_property_get_uint(obj, ACPI_PCIHP_IO_LEN_PROP, NULL);
>      }
>      if (lpc) {
>          struct AcpiGenericAddress r = { .space_id = AML_AS_SYSTEM_IO,
> @@ -214,6 +210,10 @@ static void acpi_get_pm_info(MachineState *machine, AcpiPmInfo *pm)
>          pm->fadt.flags |= 1 << ACPI_FADT_F_RESET_REG_SUP;
>          pm->cpu_hp_io_base = ICH9_CPU_HOTPLUG_IO_BASE;
>      }
> +    pm->pcihp_io_base =
> +        object_property_get_uint(obj, ACPI_PCIHP_IO_BASE_PROP, NULL);
> +    pm->pcihp_io_len =
> +        object_property_get_uint(obj, ACPI_PCIHP_IO_LEN_PROP, NULL);
>  
>      /* The above need not be conditional on machine type because the reset port
>       * happens to be the same on PIIX (pc) and ICH9 (q35). */
> @@ -472,7 +472,7 @@ static void build_append_pci_bus_devices(Aml *parent_scope, PCIBus *bus,
>          QLIST_FOREACH(sec, &bus->child, sibling) {
>              int32_t devfn = sec->parent_dev->devfn;
>  
> -            if (pci_bus_is_root(sec) || pci_bus_is_express(sec)) {
> +            if (pci_bus_is_root(sec)) {
>                  continue;
>              }
>  
> @@ -1368,7 +1368,7 @@ static void build_piix4_isa_bridge(Aml *table)
>      aml_append(table, scope);
>  }
>  
> -static void build_piix4_pci_hotplug(Aml *table)
> +static void build_x86_pci_hotplug(Aml *table, uint64_t pcihp_addr)
maybe
  s/_pci_/_acpi_pci_/
otherwise it could be a bit confusing 

>  {
>      Aml *scope;
>      Aml *field;
> @@ -1377,20 +1377,22 @@ static void build_piix4_pci_hotplug(Aml *table)
>      scope =  aml_scope("_SB.PCI0");
>  
>      aml_append(scope,
> -        aml_operation_region("PCST", AML_SYSTEM_IO, aml_int(0xae00), 0x08));
> +        aml_operation_region("PCST", AML_SYSTEM_IO, aml_int(pcihp_addr), 0x08));
>      field = aml_field("PCST", AML_DWORD_ACC, AML_NOLOCK, AML_WRITE_AS_ZEROS);
>      aml_append(field, aml_named_field("PCIU", 32));
>      aml_append(field, aml_named_field("PCID", 32));
>      aml_append(scope, field);
>  
>      aml_append(scope,
> -        aml_operation_region("SEJ", AML_SYSTEM_IO, aml_int(0xae08), 0x04));
> +    aml_operation_region("SEJ", AML_SYSTEM_IO,
not aligned properly

> +                         aml_int(pcihp_addr + ACPI_PCIHP_SEJ_BASE), 0x04));
>      field = aml_field("SEJ", AML_DWORD_ACC, AML_NOLOCK, AML_WRITE_AS_ZEROS);
>      aml_append(field, aml_named_field("B0EJ", 32));
>      aml_append(scope, field);
>  
>      aml_append(scope,
> -        aml_operation_region("BNMR", AML_SYSTEM_IO, aml_int(0xae10), 0x04));
> +        aml_operation_region("BNMR", AML_SYSTEM_IO,
> +                             aml_int(pcihp_addr + ACPI_PCIHP_BNMR_BASE), 0x04));
>      field = aml_field("BNMR", AML_DWORD_ACC, AML_NOLOCK, AML_WRITE_AS_ZEROS);
>      aml_append(field, aml_named_field("BNUM", 32));
>      aml_append(scope, field);
> @@ -1504,7 +1506,7 @@ build_dsdt(GArray *table_data, BIOSLinker *linker,
>          build_hpet_aml(dsdt);
>          build_piix4_isa_bridge(dsdt);
>          build_isa_devices_aml(dsdt);
> -        build_piix4_pci_hotplug(dsdt);
> +        build_x86_pci_hotplug(dsdt, pm->pcihp_io_base);
>          build_piix4_pci0_int(dsdt);
>      } else {
>          sb_scope = aml_scope("_SB");
> @@ -1520,6 +1522,9 @@ build_dsdt(GArray *table_data, BIOSLinker *linker,
>          build_hpet_aml(dsdt);
>          build_q35_isa_bridge(dsdt);
>          build_isa_devices_aml(dsdt);
> +        if (pm->pcihp_bridge_en) {
> +            build_x86_pci_hotplug(dsdt, pm->pcihp_io_base);
> +        }
>          build_q35_pci0_int(dsdt);
>          if (pcms->smbus && !pcmc->do_not_add_smb_acpi) {
>              build_smb0(dsdt, pcms->smbus, ICH9_SMB_DEV, ICH9_SMB_FUNC);
> @@ -1546,7 +1551,7 @@ build_dsdt(GArray *table_data, BIOSLinker *linker,
>      {
>          aml_append(scope, aml_name_decl("_HID", aml_string("ACPI0006")));
>  
> -        if (misc->is_piix4) {
> +        if (misc->is_piix4 || pm->pcihp_bridge_en) {
>              method = aml_method("_E01", 0, AML_NOTSERIALIZED);
>              aml_append(method,
>                  aml_acquire(aml_name("\\_SB.PCI0.BLCK"), 0xFFFF));



  reply	other threads:[~2020-09-24 11:05 UTC|newest]

Thread overview: 40+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-09-24  7:00 [RFC PATCH v3 0/7] Use ACPI PCI hot-plug for Q35 Julia Suvorova
2020-09-24  7:00 ` [RFC PATCH v3 1/7] hw/acpi/pcihp: Enhance acpi_pcihp_disable_root_bus() to support Q35 Julia Suvorova
2020-09-24 10:53   ` Igor Mammedov
2020-09-24 10:54   ` Ani Sinha
2020-09-24  7:00 ` [RFC PATCH v3 2/7] hw/i386/acpi-build: Add ACPI PCI hot-plug methods to Q35 Julia Suvorova
2020-09-24 11:04   ` Igor Mammedov [this message]
2020-09-25  8:20     ` Gerd Hoffmann
2020-09-24 13:15   ` Ani Sinha
2020-09-24 13:58     ` Julia Suvorova
2020-09-24  7:00 ` [RFC PATCH v3 3/7] hw/pci/pcie: Do not initialize slot capability if acpihp is used Julia Suvorova
2020-09-24  7:36   ` Michael S. Tsirkin
2020-09-24  8:23     ` Julia Suvorova
2020-09-24  9:02       ` Michael S. Tsirkin
2020-09-24 11:54       ` Ani Sinha
2020-09-24 11:14   ` Igor Mammedov
2020-09-24 11:37     ` Ani Sinha
2020-09-24  7:00 ` [RFC PATCH v3 4/7] hw/acpi/ich9: Enable ACPI PCI hot-plug Julia Suvorova
2020-09-24  7:37   ` Michael S. Tsirkin
2020-09-24 11:28   ` Ani Sinha
2020-09-24 14:27     ` Julia Suvorova
2020-09-24  7:00 ` [RFC PATCH v3 5/7] bios-tables-test: Allow changes in DSDT ACPI tables Julia Suvorova
2020-09-24 10:57   ` Ani Sinha
2020-09-24  7:00 ` [RFC PATCH v3 6/7] hw/acpi/ich9: Set ACPI PCI hot-plug as default Julia Suvorova
2020-09-24  9:33   ` Igor Mammedov
2020-09-24  9:41     ` Michael S. Tsirkin
2020-09-24 10:36   ` Daniel P. Berrangé
2020-09-24 14:24     ` Julia Suvorova
2020-09-24  7:00 ` [RFC PATCH v3 7/7] bios-tables-test: Update golden binaries Julia Suvorova
2020-09-24  8:57 ` [RFC PATCH v3 0/7] Use ACPI PCI hot-plug for Q35 no-reply
2020-09-24  9:03 ` no-reply
2020-09-24  9:20 ` Michael S. Tsirkin
2020-10-01  8:55   ` Julia Suvorova
2020-10-01 11:40     ` Michael S. Tsirkin
2020-10-01 13:01       ` Ani Sinha
2020-10-01 15:25         ` Julia Suvorova
2020-10-01 15:54       ` Julia Suvorova
2020-10-01 16:11         ` Ani Sinha
2020-10-06  6:44         ` Michael S. Tsirkin
2020-09-24  9:30 ` Igor Mammedov
2020-09-24  9:39   ` Michael S. Tsirkin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200924130419.47b68e4d@redhat.com \
    --to=imammedo@redhat.com \
    --cc=ani@anisinha.ca \
    --cc=jusual@redhat.com \
    --cc=kraxel@redhat.com \
    --cc=mst@redhat.com \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).