From: "Dr. David Alan Gilbert (git)" <dgilbert@redhat.com>
To: qemu-devel@nongnu.org, zhengchuan@huawei.com,
dovmurik@linux.vnet.ibm.com, hgcoin@gmail.com,
zhangjiachen.jaycee@bytedance.com, lvivier@redhat.com,
peterx@redhat.com, stefanha@redhat.com, vgoyal@redhat.com,
jinyan12@huawei.com, ann.zhuangyanying@huawei.com
Cc: quintela@redhat.com
Subject: [PULL 02/26] migration: Rework migrate_send_rp_req_pages() function
Date: Fri, 25 Sep 2020 13:06:31 +0100 [thread overview]
Message-ID: <20200925120655.295142-3-dgilbert@redhat.com> (raw)
In-Reply-To: <20200925120655.295142-1-dgilbert@redhat.com>
From: Peter Xu <peterx@redhat.com>
We duplicated the logic of maintaining the last_rb variable at both callers of
this function. Pass *rb pointer into the function so that we can avoid
duplicating the logic. Also, when we have the rb pointer, it's also easier to
remove the original 2nd & 4th parameters, because both of them (name of the
ramblock when needed, or the page size) can be fetched from the ramblock
pointer too.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20200908203022.341615-3-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
---
migration/migration.c | 26 ++++++++++++++++++--------
migration/migration.h | 4 ++--
migration/postcopy-ram.c | 24 ++----------------------
3 files changed, 22 insertions(+), 32 deletions(-)
diff --git a/migration/migration.c b/migration/migration.c
index 3495c9e542..827f8be07d 100644
--- a/migration/migration.c
+++ b/migration/migration.c
@@ -314,25 +314,35 @@ error:
return ret;
}
-/* Request a range of pages from the source VM at the given
- * start address.
- * rbname: Name of the RAMBlock to request the page in, if NULL it's the same
- * as the last request (a name must have been given previously)
+/* Request one page from the source VM at the given start address.
+ * rb: the RAMBlock to request the page in
* Start: Address offset within the RB
* Len: Length in bytes required - must be a multiple of pagesize
*/
-int migrate_send_rp_req_pages(MigrationIncomingState *mis, const char *rbname,
- ram_addr_t start, size_t len)
+int migrate_send_rp_req_pages(MigrationIncomingState *mis, RAMBlock *rb,
+ ram_addr_t start)
{
uint8_t bufc[12 + 1 + 255]; /* start (8), len (4), rbname up to 256 */
size_t msglen = 12; /* start + len */
+ size_t len = qemu_ram_pagesize(rb);
enum mig_rp_message_type msg_type;
+ const char *rbname;
+ int rbname_len;
*(uint64_t *)bufc = cpu_to_be64((uint64_t)start);
*(uint32_t *)(bufc + 8) = cpu_to_be32((uint32_t)len);
- if (rbname) {
- int rbname_len = strlen(rbname);
+ /*
+ * We maintain the last ramblock that we requested for page. Note that we
+ * don't need locking because this function will only be called within the
+ * postcopy ram fault thread.
+ */
+ if (rb != mis->last_rb) {
+ mis->last_rb = rb;
+
+ rbname = qemu_ram_get_idstr(rb);
+ rbname_len = strlen(rbname);
+
assert(rbname_len < 256);
bufc[msglen++] = rbname_len;
diff --git a/migration/migration.h b/migration/migration.h
index bdc7450da3..e74042362d 100644
--- a/migration/migration.h
+++ b/migration/migration.h
@@ -326,8 +326,8 @@ void migrate_send_rp_shut(MigrationIncomingState *mis,
uint32_t value);
void migrate_send_rp_pong(MigrationIncomingState *mis,
uint32_t value);
-int migrate_send_rp_req_pages(MigrationIncomingState *mis, const char* rbname,
- ram_addr_t start, size_t len);
+int migrate_send_rp_req_pages(MigrationIncomingState *mis, RAMBlock *rb,
+ ram_addr_t start);
void migrate_send_rp_recv_bitmap(MigrationIncomingState *mis,
char *block_name);
void migrate_send_rp_resume_ack(MigrationIncomingState *mis, uint32_t value);
diff --git a/migration/postcopy-ram.c b/migration/postcopy-ram.c
index 1654ff11a5..0a2f88a87d 100644
--- a/migration/postcopy-ram.c
+++ b/migration/postcopy-ram.c
@@ -684,14 +684,7 @@ int postcopy_request_shared_page(struct PostCopyFD *pcfd, RAMBlock *rb,
qemu_ram_get_idstr(rb), rb_offset);
return postcopy_wake_shared(pcfd, client_addr, rb);
}
- if (rb != mis->last_rb) {
- mis->last_rb = rb;
- migrate_send_rp_req_pages(mis, qemu_ram_get_idstr(rb),
- aligned_rbo, pagesize);
- } else {
- /* Save some space */
- migrate_send_rp_req_pages(mis, NULL, aligned_rbo, pagesize);
- }
+ migrate_send_rp_req_pages(mis, rb, aligned_rbo);
return 0;
}
@@ -986,20 +979,7 @@ retry:
* Send the request to the source - we want to request one
* of our host page sizes (which is >= TPS)
*/
- if (rb != mis->last_rb) {
- mis->last_rb = rb;
- ret = migrate_send_rp_req_pages(mis,
- qemu_ram_get_idstr(rb),
- rb_offset,
- qemu_ram_pagesize(rb));
- } else {
- /* Save some space */
- ret = migrate_send_rp_req_pages(mis,
- NULL,
- rb_offset,
- qemu_ram_pagesize(rb));
- }
-
+ ret = migrate_send_rp_req_pages(mis, rb, rb_offset);
if (ret) {
/* May be network failure, try to wait for recovery */
if (ret == -EIO && postcopy_pause_fault_thread(mis)) {
--
2.26.2
next prev parent reply other threads:[~2020-09-25 12:10 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-09-25 12:06 [PULL 00/26] migration and friends queue Dr. David Alan Gilbert (git)
2020-09-25 12:06 ` [PULL 01/26] migration: Properly destroy variables on incoming side Dr. David Alan Gilbert (git)
2020-09-25 12:06 ` Dr. David Alan Gilbert (git) [this message]
2020-09-25 12:06 ` [PULL 03/26] migration/dirtyrate: setup up query-dirtyrate framwork Dr. David Alan Gilbert (git)
2020-09-25 12:06 ` [PULL 04/26] migration/dirtyrate: add DirtyRateStatus to denote calculation status Dr. David Alan Gilbert (git)
2020-09-25 12:06 ` [PULL 05/26] migration/dirtyrate: Add RamblockDirtyInfo to store sampled page info Dr. David Alan Gilbert (git)
2020-09-25 12:06 ` [PULL 06/26] migration/dirtyrate: Add dirtyrate statistics series functions Dr. David Alan Gilbert (git)
2020-09-25 12:06 ` [PULL 07/26] migration/dirtyrate: move RAMBLOCK_FOREACH_MIGRATABLE into ram.h Dr. David Alan Gilbert (git)
2020-09-25 12:06 ` [PULL 08/26] migration/dirtyrate: Record hash results for each sampled page Dr. David Alan Gilbert (git)
2020-09-25 12:06 ` [PULL 09/26] migration/dirtyrate: Compare page hash results for recorded " Dr. David Alan Gilbert (git)
2020-09-25 12:06 ` [PULL 10/26] migration/dirtyrate: skip sampling ramblock with size below MIN_RAMBLOCK_SIZE Dr. David Alan Gilbert (git)
2020-09-25 12:06 ` [PULL 11/26] migration/dirtyrate: Implement set_sample_page_period() and is_sample_period_valid() Dr. David Alan Gilbert (git)
2020-09-25 12:06 ` [PULL 12/26] migration/dirtyrate: Implement calculate_dirtyrate() function Dr. David Alan Gilbert (git)
2020-09-25 12:06 ` [PULL 13/26] migration/dirtyrate: Implement qmp_cal_dirty_rate()/qmp_get_dirty_rate() function Dr. David Alan Gilbert (git)
2020-09-25 12:06 ` [PULL 14/26] migration/dirtyrate: Add trace_calls to make it easier to debug Dr. David Alan Gilbert (git)
2020-09-25 12:06 ` [PULL 15/26] migration: Truncate state file in xen-save-devices-state Dr. David Alan Gilbert (git)
2020-09-25 12:06 ` [PULL 16/26] migration: increase max-bandwidth to 128 MiB/s (1 Gib/s) Dr. David Alan Gilbert (git)
2020-09-25 12:06 ` [PULL 17/26] migration/tls: save hostname into MigrationState Dr. David Alan Gilbert (git)
2020-09-25 12:06 ` [PULL 18/26] migration/tls: extract migration_tls_client_create for common-use Dr. David Alan Gilbert (git)
2020-09-25 12:06 ` [PULL 19/26] migration/tls: add tls_hostname into MultiFDSendParams Dr. David Alan Gilbert (git)
2020-09-25 12:06 ` [PULL 20/26] migration/tls: extract cleanup function for common-use Dr. David Alan Gilbert (git)
2020-09-25 12:06 ` [PULL 21/26] migration/tls: add support for multifd tls-handshake Dr. David Alan Gilbert (git)
2020-09-25 12:06 ` [PULL 22/26] migration/tls: add trace points for multifd-tls Dr. David Alan Gilbert (git)
2020-09-25 12:06 ` [PULL 23/26] monitor: Use LOCK_GUARD macros Dr. David Alan Gilbert (git)
2023-02-07 13:26 ` Marc-André Lureau
2023-02-07 13:41 ` Dr. David Alan Gilbert
2023-02-07 14:06 ` Marc-André Lureau
2020-09-25 12:06 ` [PULL 24/26] virtiofsd: document cache=auto default Dr. David Alan Gilbert (git)
2020-09-25 12:06 ` [PULL 25/26] virtiofsd: Used glib "shared" thread pool Dr. David Alan Gilbert (git)
2020-09-25 12:06 ` [PULL 26/26] virtiofsd: Add -o allow_direct_io|no_allow_direct_io options Dr. David Alan Gilbert (git)
2020-09-29 21:53 ` Vivek Goyal
2020-09-30 2:14 ` [External] " Jiachen Zhang
2020-09-25 12:35 ` [PULL 00/26] migration and friends queue no-reply
2020-09-25 14:31 ` Dr. David Alan Gilbert
2020-09-25 16:22 ` Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200925120655.295142-3-dgilbert@redhat.com \
--to=dgilbert@redhat.com \
--cc=ann.zhuangyanying@huawei.com \
--cc=dovmurik@linux.vnet.ibm.com \
--cc=hgcoin@gmail.com \
--cc=jinyan12@huawei.com \
--cc=lvivier@redhat.com \
--cc=peterx@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=quintela@redhat.com \
--cc=stefanha@redhat.com \
--cc=vgoyal@redhat.com \
--cc=zhangjiachen.jaycee@bytedance.com \
--cc=zhengchuan@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).