qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Stefan Hajnoczi <stefanha@redhat.com>
To: qemu-devel@nongnu.org, Peter Maydell <peter.maydell@linaro.org>
Cc: "Kevin Wolf" <kwolf@redhat.com>, "Fam Zheng" <fam@euphon.net>,
	"Eduardo Habkost" <ehabkost@redhat.com>,
	qemu-block@nongnu.org, "Max Reitz" <mreitz@redhat.com>,
	"Stefan Hajnoczi" <stefanha@redhat.com>,
	"Cleber Rosa" <crosa@redhat.com>,
	"Philippe Mathieu-Daudé" <philmd@redhat.com>
Subject: [PULL v2 03/17] block/nvme: Reduce I/O registers scope
Date: Mon,  5 Oct 2020 16:43:09 +0100	[thread overview]
Message-ID: <20201005154323.31347-4-stefanha@redhat.com> (raw)
In-Reply-To: <20201005154323.31347-1-stefanha@redhat.com>

From: Philippe Mathieu-Daudé <philmd@redhat.com>

We only access the I/O register in nvme_init().
Remove the reference in BDRVNVMeState and reduce its scope.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20200922083821.578519-4-philmd@redhat.com>
---
 block/nvme.c | 29 ++++++++++++++++-------------
 1 file changed, 16 insertions(+), 13 deletions(-)

diff --git a/block/nvme.c b/block/nvme.c
index 3c834da8fe..e517c7539f 100644
--- a/block/nvme.c
+++ b/block/nvme.c
@@ -98,7 +98,6 @@ enum {
 struct BDRVNVMeState {
     AioContext *aio_context;
     QEMUVFIOState *vfio;
-    NVMeRegs *regs;
     /* Memory mapped registers */
     volatile struct {
         uint32_t sq_tail;
@@ -695,6 +694,7 @@ static int nvme_init(BlockDriverState *bs, const char *device, int namespace,
     uint64_t timeout_ms;
     uint64_t deadline, now;
     Error *local_err = NULL;
+    NVMeRegs *regs;
 
     qemu_co_mutex_init(&s->dma_map_lock);
     qemu_co_queue_init(&s->dma_flush_queue);
@@ -713,16 +713,16 @@ static int nvme_init(BlockDriverState *bs, const char *device, int namespace,
         goto out;
     }
 
-    s->regs = qemu_vfio_pci_map_bar(s->vfio, 0, 0, sizeof(NvmeBar),
-                                    PROT_READ | PROT_WRITE, errp);
-    if (!s->regs) {
+    regs = qemu_vfio_pci_map_bar(s->vfio, 0, 0, sizeof(NvmeBar),
+                                 PROT_READ | PROT_WRITE, errp);
+    if (!regs) {
         ret = -EINVAL;
         goto out;
     }
     /* Perform initialize sequence as described in NVMe spec "7.6.1
      * Initialization". */
 
-    cap = le64_to_cpu(s->regs->ctrl.cap);
+    cap = le64_to_cpu(regs->ctrl.cap);
     if (!(cap & (1ULL << 37))) {
         error_setg(errp, "Device doesn't support NVMe command set");
         ret = -EINVAL;
@@ -735,10 +735,10 @@ static int nvme_init(BlockDriverState *bs, const char *device, int namespace,
     timeout_ms = MIN(500 * ((cap >> 24) & 0xFF), 30000);
 
     /* Reset device to get a clean state. */
-    s->regs->ctrl.cc = cpu_to_le32(le32_to_cpu(s->regs->ctrl.cc) & 0xFE);
+    regs->ctrl.cc = cpu_to_le32(le32_to_cpu(regs->ctrl.cc) & 0xFE);
     /* Wait for CSTS.RDY = 0. */
     deadline = qemu_clock_get_ns(QEMU_CLOCK_REALTIME) + timeout_ms * SCALE_MS;
-    while (le32_to_cpu(s->regs->ctrl.csts) & 0x1) {
+    while (le32_to_cpu(regs->ctrl.csts) & 0x1) {
         if (qemu_clock_get_ns(QEMU_CLOCK_REALTIME) > deadline) {
             error_setg(errp, "Timeout while waiting for device to reset (%"
                              PRId64 " ms)",
@@ -766,18 +766,18 @@ static int nvme_init(BlockDriverState *bs, const char *device, int namespace,
     }
     s->nr_queues = 1;
     QEMU_BUILD_BUG_ON(NVME_QUEUE_SIZE & 0xF000);
-    s->regs->ctrl.aqa = cpu_to_le32((NVME_QUEUE_SIZE << 16) | NVME_QUEUE_SIZE);
-    s->regs->ctrl.asq = cpu_to_le64(s->queues[INDEX_ADMIN]->sq.iova);
-    s->regs->ctrl.acq = cpu_to_le64(s->queues[INDEX_ADMIN]->cq.iova);
+    regs->ctrl.aqa = cpu_to_le32((NVME_QUEUE_SIZE << 16) | NVME_QUEUE_SIZE);
+    regs->ctrl.asq = cpu_to_le64(s->queues[INDEX_ADMIN]->sq.iova);
+    regs->ctrl.acq = cpu_to_le64(s->queues[INDEX_ADMIN]->cq.iova);
 
     /* After setting up all control registers we can enable device now. */
-    s->regs->ctrl.cc = cpu_to_le32((ctz32(NVME_CQ_ENTRY_BYTES) << 20) |
+    regs->ctrl.cc = cpu_to_le32((ctz32(NVME_CQ_ENTRY_BYTES) << 20) |
                               (ctz32(NVME_SQ_ENTRY_BYTES) << 16) |
                               0x1);
     /* Wait for CSTS.RDY = 1. */
     now = qemu_clock_get_ns(QEMU_CLOCK_REALTIME);
     deadline = now + timeout_ms * 1000000;
-    while (!(le32_to_cpu(s->regs->ctrl.csts) & 0x1)) {
+    while (!(le32_to_cpu(regs->ctrl.csts) & 0x1)) {
         if (qemu_clock_get_ns(QEMU_CLOCK_REALTIME) > deadline) {
             error_setg(errp, "Timeout while waiting for device to start (%"
                              PRId64 " ms)",
@@ -808,6 +808,10 @@ static int nvme_init(BlockDriverState *bs, const char *device, int namespace,
         ret = -EIO;
     }
 out:
+    if (regs) {
+        qemu_vfio_pci_unmap_bar(s->vfio, 0, (void *)regs, 0, sizeof(NvmeBar));
+    }
+
     /* Cleaning up is done in nvme_file_open() upon error. */
     return ret;
 }
@@ -882,7 +886,6 @@ static void nvme_close(BlockDriverState *bs)
     event_notifier_cleanup(&s->irq_notifier[MSIX_SHARED_IRQ_IDX]);
     qemu_vfio_pci_unmap_bar(s->vfio, 0, (void *)s->doorbells,
                             sizeof(NvmeBar), NVME_DOORBELL_SIZE);
-    qemu_vfio_pci_unmap_bar(s->vfio, 0, (void *)s->regs, 0, sizeof(NvmeBar));
     qemu_vfio_close(s->vfio);
 
     g_free(s->device);
-- 
2.26.2


  parent reply	other threads:[~2020-10-05 15:50 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-10-05 15:43 [PULL v2 00/17] Block patches Stefan Hajnoczi
2020-10-05 15:43 ` [PULL v2 01/17] util/vfio-helpers: Pass page protections to qemu_vfio_pci_map_bar() Stefan Hajnoczi
2020-10-05 15:43 ` [PULL v2 02/17] block/nvme: Map doorbells pages write-only Stefan Hajnoczi
2020-10-05 15:43 ` Stefan Hajnoczi [this message]
2020-10-05 15:43 ` [PULL v2 04/17] block/nvme: Drop NVMeRegs structure, directly use NvmeBar Stefan Hajnoczi
2020-10-05 15:43 ` [PULL v2 05/17] block/nvme: Use register definitions from 'block/nvme.h' Stefan Hajnoczi
2020-10-05 15:43 ` [PULL v2 06/17] block/nvme: Replace magic value by SCALE_MS definition Stefan Hajnoczi
2020-10-05 15:43 ` [PULL v2 07/17] block: return error-code from bdrv_invalidate_cache Stefan Hajnoczi
2020-10-05 15:43 ` [PULL v2 08/17] block/io: refactor coroutine wrappers Stefan Hajnoczi
2020-10-05 15:43 ` [PULL v2 09/17] block: declare some coroutine functions in block/coroutines.h Stefan Hajnoczi
2020-10-05 15:43 ` [PULL v2 10/17] scripts: add block-coroutine-wrapper.py Stefan Hajnoczi
2020-10-05 15:43 ` [PULL v2 11/17] block: generate coroutine-wrapper code Stefan Hajnoczi
2020-10-05 15:43 ` [PULL v2 12/17] block: drop bdrv_prwv Stefan Hajnoczi
2020-10-05 15:43 ` [PULL v2 13/17] block/io: refactor save/load vmstate Stefan Hajnoczi
2020-10-05 15:43 ` [PULL v2 14/17] include/block/block.h: drop non-ascii quotation mark Stefan Hajnoczi
2020-10-05 15:43 ` [PULL v2 15/17] docs: add 'io_uring' option to 'aio' param in qemu-options.hx Stefan Hajnoczi
2020-10-05 15:43 ` [PULL v2 16/17] util/vfio-helpers: Collect IOVA reserved regions Stefan Hajnoczi
2020-10-05 15:43 ` [PULL v2 17/17] util/vfio-helpers: Rework the IOVA allocator to avoid " Stefan Hajnoczi
2020-10-06 12:18 ` [PULL v2 00/17] Block patches Peter Maydell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201005154323.31347-4-stefanha@redhat.com \
    --to=stefanha@redhat.com \
    --cc=crosa@redhat.com \
    --cc=ehabkost@redhat.com \
    --cc=fam@euphon.net \
    --cc=kwolf@redhat.com \
    --cc=mreitz@redhat.com \
    --cc=peter.maydell@linaro.org \
    --cc=philmd@redhat.com \
    --cc=qemu-block@nongnu.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).