[PATCH v3 2/2] hw/arm/sbsa-ref: add SBSA watchdog device

[Shashi Mallela <shashi.mallela@linaro.org>]

Included the newly implemented SBSA generic watchdog device model into
SBSA platform

Signed-off-by: Shashi Mallela <shashi.mallela@linaro.org>
---
 hw/arm/sbsa-ref.c | 44 ++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 44 insertions(+)

diff --git a/hw/arm/sbsa-ref.c b/hw/arm/sbsa-ref.c
index 9c3a893bedfd..1e6ef124924c 100644
--- a/hw/arm/sbsa-ref.c
+++ b/hw/arm/sbsa-ref.c
@@ -40,6 +40,7 @@
 #include "hw/qdev-properties.h"
 #include "hw/usb.h"
 #include "hw/char/pl011.h"
+#include "hw/watchdog/wdt_sbsa_gwdt.h"
 #include "net/net.h"
 #include "qom/object.h"
 
@@ -64,6 +65,9 @@ enum {
     SBSA_GIC_DIST,
     SBSA_GIC_REDIST,
     SBSA_SECURE_EC,
+    SBSA_GWDT,
+    SBSA_GWDT_REFRESH,
+    SBSA_GWDT_CONTROL,
     SBSA_SMMU,
     SBSA_UART,
     SBSA_RTC,
@@ -104,6 +108,8 @@ static const MemMapEntry sbsa_ref_memmap[] = {
     [SBSA_GIC_DIST] =           { 0x40060000, 0x00010000 },
     [SBSA_GIC_REDIST] =         { 0x40080000, 0x04000000 },
     [SBSA_SECURE_EC] =          { 0x50000000, 0x00001000 },
+    [SBSA_GWDT_REFRESH] =       { 0x50010000, 0x00001000 },
+    [SBSA_GWDT_CONTROL] =       { 0x50011000, 0x00001000 },
     [SBSA_UART] =               { 0x60000000, 0x00001000 },
     [SBSA_RTC] =                { 0x60010000, 0x00001000 },
     [SBSA_GPIO] =               { 0x60020000, 0x00001000 },
@@ -133,6 +139,7 @@ static const int sbsa_ref_irqmap[] = {
     [SBSA_SECURE_UART_MM] = 9,
     [SBSA_AHCI] = 10,
     [SBSA_EHCI] = 11,
+    [SBSA_GWDT] = 12,
 };
 
 static uint64_t sbsa_ref_cpu_mp_affinity(SBSAMachineState *sms, int idx)
@@ -141,6 +148,26 @@ static uint64_t sbsa_ref_cpu_mp_affinity(SBSAMachineState *sms, int idx)
     return arm_cpu_mp_affinity(idx, clustersz);
 }
 
+static void create_wdt_fdt(SBSAMachineState *sms)
+{
+    char *nodename;
+    const char compat[] = "arm,sbsa-gwdt";
+
+    hwaddr rbase = sbsa_ref_memmap[SBSA_GWDT_REFRESH].base;
+    hwaddr cbase = sbsa_ref_memmap[SBSA_GWDT_CONTROL].base;
+
+    nodename = g_strdup_printf("/watchdog@%" PRIx64, rbase);
+    qemu_fdt_add_subnode(sms->fdt, nodename);
+
+    qemu_fdt_setprop(sms->fdt, nodename, "compatible",
+                             compat, sizeof(compat));
+    qemu_fdt_setprop_sized_cells(sms->fdt, nodename, "reg",
+                                 2, rbase, 2, SBSA_GWDT_RMMIO_SIZE,
+                                 2, cbase, 2, SBSA_GWDT_CMMIO_SIZE);
+    qemu_fdt_setprop_cell(sms->fdt, nodename, "timeout-sec", 30);
+    g_free(nodename);
+}
+
 /*
  * Firmware on this machine only uses ACPI table to load OS, these limited
  * device tree nodes are just to let firmware know the info which varies from
@@ -219,6 +246,7 @@ static void create_fdt(SBSAMachineState *sms)
 
         g_free(nodename);
     }
+    create_wdt_fdt(sms);
 }
 
 #define SBSA_FLASH_SECTOR_SIZE (256 * KiB)
@@ -447,6 +475,20 @@ static void create_rtc(const SBSAMachineState *sms)
     sysbus_create_simple("pl031", base, qdev_get_gpio_in(sms->gic, irq));
 }
 
+static void create_wdt(const SBSAMachineState *sms)
+{
+    hwaddr rbase = sbsa_ref_memmap[SBSA_GWDT_REFRESH].base;
+    hwaddr cbase = sbsa_ref_memmap[SBSA_GWDT_CONTROL].base;
+    DeviceState *dev = qdev_new(TYPE_WDT_SBSA_GWDT);
+    SysBusDevice *s = SYS_BUS_DEVICE(dev);
+    int irq = sbsa_ref_irqmap[SBSA_GWDT];
+
+    sysbus_realize_and_unref(s, &error_fatal);
+    sysbus_mmio_map(s, 0, rbase);
+    sysbus_mmio_map(s, 1, cbase);
+    sysbus_connect_irq(s, 0, qdev_get_gpio_in(sms->gic, irq));
+}
+
 static DeviceState *gpio_key_dev;
 static void sbsa_ref_powerdown_req(Notifier *n, void *opaque)
 {
@@ -730,6 +772,8 @@ static void sbsa_ref_init(MachineState *machine)
 
     create_rtc(sms);
 
+    create_wdt(sms);
+
     create_gpio(sms);
 
     create_ahci(sms);
-- 
2.18.4