[PATCH v10 12/12] hw/block/nvme: Document zoned parameters in usage text

[Dmitry Fomichev <dmitry.fomichev@wdc.com>]

Added brief descriptions of the new device properties that are
now available to users to configure features of Zoned Namespace
Command Set in the emulator.

This patch is for documentation only, no functionality change.

Signed-off-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Reviewed-by: Niklas Cassel <Niklas.Cassel@wdc.com>
---
 hw/block/nvme.c | 47 ++++++++++++++++++++++++++++++++++++++++++-----
 1 file changed, 42 insertions(+), 5 deletions(-)

diff --git a/hw/block/nvme.c b/hw/block/nvme.c
index e82e3be821..6043f95116 100644
--- a/hw/block/nvme.c
+++ b/hw/block/nvme.c
@@ -9,7 +9,7 @@
  */
 
 /**
- * Reference Specs: http://www.nvmexpress.org, 1.2, 1.1, 1.0e
+ * Reference Specs: http://www.nvmexpress.org, 1.4, 1.3, 1.2, 1.1, 1.0e
  *
  *  https://nvmexpress.org/developers/nvme-specification/
  */
@@ -22,8 +22,9 @@
  *              [pmrdev=<mem_backend_file_id>,] \
  *              max_ioqpairs=<N[optional]>, \
  *              aerl=<N[optional]>, aer_max_queued=<N[optional]>, \
- *              mdts=<N[optional]>
- *      -device nvme-ns,drive=<drive_id>,bus=bus_name,nsid=<nsid>
+ *              mdts=<N[optional]>,zoned.append_size_limit=<N[optional]> \
+ *      -device nvme-ns,drive=<drive_id>,bus=<bus_name>,nsid=<nsid>,\
+ *              zoned=<true|false[optional]>
  *
  * Note cmb_size_mb denotes size of CMB in MB. CMB is assumed to be at
  * offset 0 in BAR2 and supports only WDS, RDS and SQS for now.
@@ -41,14 +42,50 @@
  * ~~~~~~~~~~~~~~~~~~~~~~
  * - `aerl`
  *   The Asynchronous Event Request Limit (AERL). Indicates the maximum number
- *   of concurrently outstanding Asynchronous Event Request commands suppoert
+ *   of concurrently outstanding Asynchronous Event Request commands support
  *   by the controller. This is a 0's based value.
  *
  * - `aer_max_queued`
  *   This is the maximum number of events that the device will enqueue for
- *   completion when there are no oustanding AERs. When the maximum number of
+ *   completion when there are no outstanding AERs. When the maximum number of
  *   enqueued events are reached, subsequent events will be dropped.
  *
+ * - `zoned.append_size_limit`
+ *   The maximum I/O size in bytes that is allowed in Zone Append command.
+ *   The default is 128KiB. Since internally this this value is maintained as
+ *   ZASL = log2(<maximum append size> / <page size>), some values assigned
+ *   to this property may be rounded down and result in a lower maximum ZA
+ *   data size being in effect. By setting this property to 0, users can make
+ *   ZASL to be equal to MDTS. This property only affects zoned namespaces.
+ *
+ * Setting `zoned` to true selects Zoned Command Set at the namespace.
+ * In this case, the following namespace properties are available to configure
+ * zoned operation:
+ *     zoned.zsze=<zone size in bytes, default: 128MiB>
+ *         The number may be followed by K, M, G as in kilo-, mega- or giga-.
+ *
+ *     zoned.zcap=<zone capacity in bytes, default: zone size>
+ *         The value 0 (default) forces zone capacity to be the same as zone
+ *         size. The value of this property may not exceed zone size.
+ *
+ *     zoned.descr_ext_size=<zone descriptor extension size, default 0>
+ *         This value needs to be specified in 64B units. If it is zero,
+ *         namespace(s) will not support zone descriptor extensions.
+ *
+ *     zoned.max_active=<Maximum Active Resources (zones), default: 0>
+ *         The default value means there is no limit to the number of
+ *         concurrently active zones.
+ *
+ *     zoned.max_open=<Maximum Open Resources (zones), default: 0>
+ *         The default value means there is no limit to the number of
+ *         concurrently open zones.
+ *
+ *     zoned.offline_zones=<the number of offline zones to inject, default: 0>
+ *
+ *     zoned.rdonly_zones=<the number of read-only zones to inject, default: 0>
+ *
+ *     zoned.cross_zone_read=<enable RAZB, default: false>
+ *         Setting this property to true enables Read Across Zone Boundaries.
  */
 
 #include "qemu/osdep.h"
-- 
2.21.0