From: Gerd Hoffmann <kraxel@redhat.com>
To: qemu-devel@nongnu.org
Cc: Geoffrey McRae <geoff@hostfission.com>,
Christian Schoenebeck <qemu_oss@crudebyte.com>,
Gerd Hoffmann <kraxel@redhat.com>
Subject: [PULL 1/6] audio/jack: fix use after free segfault
Date: Fri, 13 Nov 2020 13:29:50 +0100 [thread overview]
Message-ID: <20201113122955.759-2-kraxel@redhat.com> (raw)
In-Reply-To: <20201113122955.759-1-kraxel@redhat.com>
From: Geoffrey McRae <geoff@hostfission.com>
This change registers a bottom handler to close the JACK client
connection when a server shutdown signal is received. Without this
libjack2 attempts to "clean up" old clients and causes a use after free
segfault.
Signed-off-by: Geoffrey McRae <geoff@hostfission.com>
Reviewed-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Message-Id: <20201108063351.35804-2-geoff@hostfission.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
---
audio/jackaudio.c | 50 +++++++++++++++++++++++++++++++++++------------
1 file changed, 37 insertions(+), 13 deletions(-)
diff --git a/audio/jackaudio.c b/audio/jackaudio.c
index 1e714b30bc8a..3b7c18443dbe 100644
--- a/audio/jackaudio.c
+++ b/audio/jackaudio.c
@@ -25,6 +25,7 @@
#include "qemu/osdep.h"
#include "qemu/module.h"
#include "qemu/atomic.h"
+#include "qemu/main-loop.h"
#include "qemu-common.h"
#include "audio.h"
@@ -63,6 +64,7 @@ typedef struct QJackClient {
QJackState state;
jack_client_t *client;
jack_nframes_t freq;
+ QEMUBH *shutdown_bh;
struct QJack *j;
int nchannels;
@@ -87,6 +89,7 @@ QJackIn;
static int qjack_client_init(QJackClient *c);
static void qjack_client_connect_ports(QJackClient *c);
static void qjack_client_fini(QJackClient *c);
+static QemuMutex qjack_shutdown_lock;
static void qjack_buffer_create(QJackBuffer *buffer, int channels, int frames)
{
@@ -306,21 +309,27 @@ static int qjack_xrun(void *arg)
return 0;
}
+static void qjack_shutdown_bh(void *opaque)
+{
+ QJackClient *c = (QJackClient *)opaque;
+ qjack_client_fini(c);
+}
+
static void qjack_shutdown(void *arg)
{
QJackClient *c = (QJackClient *)arg;
c->state = QJACK_STATE_SHUTDOWN;
+ qemu_bh_schedule(c->shutdown_bh);
}
static void qjack_client_recover(QJackClient *c)
{
- if (c->state == QJACK_STATE_SHUTDOWN) {
- qjack_client_fini(c);
+ if (c->state != QJACK_STATE_DISCONNECTED) {
+ return;
}
/* packets is used simply to throttle this */
- if (c->state == QJACK_STATE_DISCONNECTED &&
- c->packets % 100 == 0) {
+ if (c->packets % 100 == 0) {
/* if enabled then attempt to recover */
if (c->enabled) {
@@ -489,15 +498,16 @@ static int qjack_init_out(HWVoiceOut *hw, struct audsettings *as,
QJackOut *jo = (QJackOut *)hw;
Audiodev *dev = (Audiodev *)drv_opaque;
- qjack_client_fini(&jo->c);
-
jo->c.out = true;
jo->c.enabled = false;
jo->c.nchannels = as->nchannels;
jo->c.opt = dev->u.jack.out;
+ jo->c.shutdown_bh = qemu_bh_new(qjack_shutdown_bh, &jo->c);
+
int ret = qjack_client_init(&jo->c);
if (ret != 0) {
+ qemu_bh_delete(jo->c.shutdown_bh);
return ret;
}
@@ -525,15 +535,16 @@ static int qjack_init_in(HWVoiceIn *hw, struct audsettings *as,
QJackIn *ji = (QJackIn *)hw;
Audiodev *dev = (Audiodev *)drv_opaque;
- qjack_client_fini(&ji->c);
-
ji->c.out = false;
ji->c.enabled = false;
ji->c.nchannels = as->nchannels;
ji->c.opt = dev->u.jack.in;
+ ji->c.shutdown_bh = qemu_bh_new(qjack_shutdown_bh, &ji->c);
+
int ret = qjack_client_init(&ji->c);
if (ret != 0) {
+ qemu_bh_delete(ji->c.shutdown_bh);
return ret;
}
@@ -555,7 +566,7 @@ static int qjack_init_in(HWVoiceIn *hw, struct audsettings *as,
return 0;
}
-static void qjack_client_fini(QJackClient *c)
+static void qjack_client_fini_locked(QJackClient *c)
{
switch (c->state) {
case QJACK_STATE_RUNNING:
@@ -564,28 +575,40 @@ static void qjack_client_fini(QJackClient *c)
case QJACK_STATE_SHUTDOWN:
jack_client_close(c->client);
+ c->client = NULL;
+
+ qjack_buffer_free(&c->fifo);
+ g_free(c->port);
+
+ c->state = QJACK_STATE_DISCONNECTED;
/* fallthrough */
case QJACK_STATE_DISCONNECTED:
break;
}
+}
- qjack_buffer_free(&c->fifo);
- g_free(c->port);
-
- c->state = QJACK_STATE_DISCONNECTED;
+static void qjack_client_fini(QJackClient *c)
+{
+ qemu_mutex_lock(&qjack_shutdown_lock);
+ qjack_client_fini_locked(c);
+ qemu_mutex_unlock(&qjack_shutdown_lock);
}
static void qjack_fini_out(HWVoiceOut *hw)
{
QJackOut *jo = (QJackOut *)hw;
qjack_client_fini(&jo->c);
+
+ qemu_bh_delete(jo->c.shutdown_bh);
}
static void qjack_fini_in(HWVoiceIn *hw)
{
QJackIn *ji = (QJackIn *)hw;
qjack_client_fini(&ji->c);
+
+ qemu_bh_delete(ji->c.shutdown_bh);
}
static void qjack_enable_out(HWVoiceOut *hw, bool enable)
@@ -662,6 +685,7 @@ static void qjack_info(const char *msg)
static void register_audio_jack(void)
{
+ qemu_mutex_init(&qjack_shutdown_lock);
audio_driver_register(&jack_driver);
jack_set_thread_creator(qjack_thread_creator);
jack_set_error_function(qjack_error);
--
2.27.0
next prev parent reply other threads:[~2020-11-13 12:37 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-11-13 12:29 [PULL 0/6] Fixes 20201113 patches Gerd Hoffmann
2020-11-13 12:29 ` Gerd Hoffmann [this message]
2020-11-13 12:29 ` [PULL 2/6] console: avoid passing con=NULL to graphic_hw_update_done() Gerd Hoffmann
2020-11-13 12:29 ` [PULL 3/6] hw/usb/Kconfig: Fix USB_XHCI_NEC (depends on USB_XHCI_PCI) Gerd Hoffmann
2020-11-13 12:29 ` [PULL 4/6] hw/display/cirrus_vga: Remove debugging code commented out Gerd Hoffmann
2020-11-13 12:29 ` [PULL 5/6] hw/display/cirrus_vga: Fix hexadecimal format string specifier Gerd Hoffmann
2020-11-13 12:29 ` [PULL 6/6] xhci: fix nec-usb-xhci properties Gerd Hoffmann
2020-11-13 13:40 ` [PULL 0/6] Fixes 20201113 patches Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201113122955.759-2-kraxel@redhat.com \
--to=kraxel@redhat.com \
--cc=geoff@hostfission.com \
--cc=qemu-devel@nongnu.org \
--cc=qemu_oss@crudebyte.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).