From: Hannes Reinecke <hare@suse.de>
To: Paolo Bonzini <pbonzini@redhat.com>
Cc: qemu-devel@nongnu.org, Hannes Reinecke <hare@suse.de>
Subject: [PATCH 1/3] virtio-scsi: trace events
Date: Mon, 16 Nov 2020 19:31:12 +0100 [thread overview]
Message-ID: <20201116183114.55703-2-hare@suse.de> (raw)
In-Reply-To: <20201116183114.55703-1-hare@suse.de>
Add trace events for virtio command and response tracing.
Signed-off-by: Hannes Reinecke <hare@suse.de>
---
hw/scsi/trace-events | 9 +++++++++
hw/scsi/virtio-scsi.c | 30 +++++++++++++++++++++++++++++-
2 files changed, 38 insertions(+), 1 deletion(-)
diff --git a/hw/scsi/trace-events b/hw/scsi/trace-events
index 9a4a60ca63..0e0aa9847d 100644
--- a/hw/scsi/trace-events
+++ b/hw/scsi/trace-events
@@ -294,6 +294,15 @@ lsi_awoken(void) "Woken by SIGP"
lsi_reg_read(const char *name, int offset, uint8_t ret) "Read reg %s 0x%x = 0x%02x"
lsi_reg_write(const char *name, int offset, uint8_t val) "Write reg %s 0x%x = 0x%02x"
+# virtio-scsi.c
+virtio_scsi_cmd_req(int lun, uint32_t tag, uint8_t cmd) "virtio_scsi_cmd_req lun=%u tag=0x%x cmd=0x%x"
+virtio_scsi_cmd_resp(int lun, uint32_t tag, int response, uint8_t status) "virtio_scsi_cmd_resp lun=%u tag=0x%x response=%d status=0x%x"
+virtio_scsi_tmf_req(int lun, uint32_t tag, int subtype) "virtio_scsi_tmf_req lun=%u tag=0x%x subtype=%d"
+virtio_scsi_tmf_resp(int lun, uint32_t tag, int response) "virtio_scsi_tmf_resp lun=%u tag=0x%x response=%d"
+virtio_scsi_an_req(int lun, uint32_t event_requested) "virtio_scsi_an_req lun=%u event_requested=0x%x"
+virtio_scsi_an_resp(int lun, int response) "virtio_scsi_an_resp lun=%u response=%d"
+virtio_scsi_event(int lun, int event, int reason) "virtio_scsi_event lun=%u event=%d reason=%d"
+
# scsi-disk.c
scsi_disk_check_condition(uint32_t tag, uint8_t key, uint8_t asc, uint8_t ascq) "Command complete tag=0x%x sense=%d/%d/%d"
scsi_disk_read_complete(uint32_t tag, size_t size) "Data ready tag=0x%x len=%zd"
diff --git a/hw/scsi/virtio-scsi.c b/hw/scsi/virtio-scsi.c
index 3a71ea7097..c9873d5af7 100644
--- a/hw/scsi/virtio-scsi.c
+++ b/hw/scsi/virtio-scsi.c
@@ -27,6 +27,7 @@
#include "scsi/constants.h"
#include "hw/virtio/virtio-bus.h"
#include "hw/virtio/virtio-access.h"
+#include "trace.h"
static inline int virtio_scsi_get_lun(uint8_t *lun)
{
@@ -239,7 +240,11 @@ static void virtio_scsi_cancel_notify(Notifier *notifier, void *data)
notifier);
if (--n->tmf_req->remaining == 0) {
- virtio_scsi_complete_req(n->tmf_req);
+ VirtIOSCSIReq *req = n->tmf_req;
+
+ trace_virtio_scsi_tmf_resp(virtio_scsi_get_lun(req->req.tmf.lun),
+ req->req.tmf.tag, req->resp.tmf.response);
+ virtio_scsi_complete_req(req);
}
g_free(n);
}
@@ -273,6 +278,9 @@ static int virtio_scsi_do_tmf(VirtIOSCSI *s, VirtIOSCSIReq *req)
req->req.tmf.subtype =
virtio_tswap32(VIRTIO_DEVICE(s), req->req.tmf.subtype);
+ trace_virtio_scsi_tmf_req(virtio_scsi_get_lun(req->req.tmf.lun),
+ req->req.tmf.tag, req->req.tmf.subtype);
+
switch (req->req.tmf.subtype) {
case VIRTIO_SCSI_T_TMF_ABORT_TASK:
case VIRTIO_SCSI_T_TMF_QUERY_TASK:
@@ -422,11 +430,23 @@ static void virtio_scsi_handle_ctrl_req(VirtIOSCSI *s, VirtIOSCSIReq *req)
virtio_scsi_bad_req(req);
return;
} else {
+ req->req.an.event_requested =
+ virtio_tswap32(VIRTIO_DEVICE(s), req->req.an.event_requested);
+ trace_virtio_scsi_an_req(virtio_scsi_get_lun(req->req.an.lun),
+ req->req.an.event_requested);
req->resp.an.event_actual = 0;
req->resp.an.response = VIRTIO_SCSI_S_OK;
}
}
if (r == 0) {
+ if (type == VIRTIO_SCSI_T_TMF)
+ trace_virtio_scsi_tmf_resp(virtio_scsi_get_lun(req->req.tmf.lun),
+ req->req.tmf.tag,
+ req->resp.tmf.response);
+ else if (type == VIRTIO_SCSI_T_AN_QUERY ||
+ type == VIRTIO_SCSI_T_AN_SUBSCRIBE)
+ trace_virtio_scsi_an_resp(virtio_scsi_get_lun(req->req.an.lun),
+ req->resp.an.response);
virtio_scsi_complete_req(req);
} else {
assert(r == -EINPROGRESS);
@@ -462,6 +482,10 @@ static void virtio_scsi_handle_ctrl(VirtIODevice *vdev, VirtQueue *vq)
static void virtio_scsi_complete_cmd_req(VirtIOSCSIReq *req)
{
+ trace_virtio_scsi_cmd_resp(virtio_scsi_get_lun(req->req.cmd.lun),
+ req->req.cmd.tag,
+ req->resp.cmd.response,
+ req->resp.cmd.status);
/* Sense data is not in req->resp and is copied separately
* in virtio_scsi_command_complete.
*/
@@ -559,6 +583,8 @@ static int virtio_scsi_handle_cmd_req_prepare(VirtIOSCSI *s, VirtIOSCSIReq *req)
return -EINVAL;
}
}
+ trace_virtio_scsi_cmd_req(virtio_scsi_get_lun(req->req.cmd.lun),
+ req->req.cmd.tag, req->req.cmd.cdb[0]);
d = virtio_scsi_device_find(s, req->req.cmd.lun);
if (!d) {
@@ -758,6 +784,8 @@ void virtio_scsi_push_event(VirtIOSCSI *s, SCSIDevice *dev,
}
evt->lun[3] = dev->lun & 0xFF;
}
+ trace_virtio_scsi_event(virtio_scsi_get_lun(evt->lun), event, reason);
+
virtio_scsi_complete_req(req);
}
--
2.16.4
next prev parent reply other threads:[~2020-11-16 18:56 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-11-16 18:31 [PATCH 0/3] scsi: infinite guest hangs with scsi-disk Hannes Reinecke
2020-11-16 18:31 ` Hannes Reinecke [this message]
2020-11-16 18:31 ` [PATCH 2/3] scsi: make io_timeout configurable Hannes Reinecke
2021-09-20 18:56 ` Paolo Bonzini
2021-09-21 5:39 ` Hannes Reinecke
2021-09-21 7:25 ` Paolo Bonzini
2021-09-22 15:47 ` Philippe Mathieu-Daudé
2021-09-23 6:03 ` Hannes Reinecke
2021-09-23 7:19 ` Paolo Bonzini
2020-11-16 18:31 ` [PATCH 3/3] scsi: add tracing for SG_IO commands Hannes Reinecke
2020-11-16 19:09 ` [PATCH 0/3] scsi: infinite guest hangs with scsi-disk no-reply
2020-12-17 13:49 ` Paolo Bonzini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201116183114.55703-2-hare@suse.de \
--to=hare@suse.de \
--cc=pbonzini@redhat.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).