From: Igor Mammedov <imammedo@redhat.com>
To: Paolo Bonzini <pbonzini@redhat.com>
Cc: qemu-devel@nongnu.org
Subject: Re: [PATCH 31/36] vl: extract softmmu/rtc.c
Date: Fri, 27 Nov 2020 13:43:01 +0100 [thread overview]
Message-ID: <20201127134301.4c16886b@redhat.com> (raw)
In-Reply-To: <20201123141435.2726558-32-pbonzini@redhat.com>
On Mon, 23 Nov 2020 09:14:30 -0500
Paolo Bonzini <pbonzini@redhat.com> wrote:
> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
> ---
> include/sysemu/sysemu.h | 2 +
> softmmu/meson.build | 1 +
> softmmu/rtc.c | 190 ++++++++++++++++++++++++++++++++++++++++
> softmmu/vl.c | 156 ---------------------------------
> 4 files changed, 193 insertions(+), 156 deletions(-)
> create mode 100644 softmmu/rtc.c
>
> diff --git a/include/sysemu/sysemu.h b/include/sysemu/sysemu.h
> index 1b62deaf2b..18cf586cd0 100644
> --- a/include/sysemu/sysemu.h
> +++ b/include/sysemu/sysemu.h
> @@ -22,6 +22,8 @@ void qemu_run_machine_init_done_notifiers(void);
> void qemu_add_machine_init_done_notifier(Notifier *notify);
> void qemu_remove_machine_init_done_notifier(Notifier *notify);
>
> +void configure_rtc(QemuOpts *opts);
> +
> extern int autostart;
>
> typedef enum {
> diff --git a/softmmu/meson.build b/softmmu/meson.build
> index 7b52339e7a..d098d89653 100644
> --- a/softmmu/meson.build
> +++ b/softmmu/meson.build
> @@ -6,6 +6,7 @@ specific_ss.add(when: 'CONFIG_SOFTMMU', if_true: [files(
> 'datadir.c',
> 'physmem.c',
> 'ioport.c',
> + 'rtc.c',
> 'memory.c',
> 'memory_mapping.c',
> 'qtest.c',
> diff --git a/softmmu/rtc.c b/softmmu/rtc.c
> new file mode 100644
> index 0000000000..e1e15ef613
> --- /dev/null
> +++ b/softmmu/rtc.c
> @@ -0,0 +1,190 @@
> +/*
> + * RTC configuration and clock read
> + *
> + * Copyright (c) 2003-2020 QEMU contributors
> + *
> + * Permission is hereby granted, free of charge, to any person obtaining a copy
> + * of this software and associated documentation files (the "Software"), to deal
> + * in the Software without restriction, including without limitation the rights
> + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
> + * copies of the Software, and to permit persons to whom the Software is
> + * furnished to do so, subject to the following conditions:
> + *
> + * The above copyright notice and this permission notice shall be included in
> + * all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
> + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
> + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
> + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
> + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
> + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
> + * THE SOFTWARE.
> + */
> +
> +#include "qemu/osdep.h"
> +#include "qemu-common.h"
> +#include "qemu/cutils.h"
> +#include "qapi/error.h"
> +#include "qapi/qmp/qerror.h"
> +#include "qemu/error-report.h"
> +#include "qemu/option.h"
> +#include "qemu/timer.h"
> +#include "qom/object.h"
> +#include "sysemu/replay.h"
> +#include "sysemu/sysemu.h"
> +
> +static enum {
> + RTC_BASE_UTC,
> + RTC_BASE_LOCALTIME,
> + RTC_BASE_DATETIME,
> +} rtc_base_type = RTC_BASE_UTC;
> +static time_t rtc_ref_start_datetime;
> +static int rtc_realtime_clock_offset; /* used only with QEMU_CLOCK_REALTIME */
> +static int rtc_host_datetime_offset = -1; /* valid & used only with
> + RTC_BASE_DATETIME */
> +QEMUClockType rtc_clock;
> +/***********************************************************/
> +/* RTC reference time/date access */
> +static time_t qemu_ref_timedate(QEMUClockType clock)
> +{
> + time_t value = qemu_clock_get_ms(clock) / 1000;
> + switch (clock) {
> + case QEMU_CLOCK_REALTIME:
> + value -= rtc_realtime_clock_offset;
> + /* fall through */
> + case QEMU_CLOCK_VIRTUAL:
> + value += rtc_ref_start_datetime;
> + break;
> + case QEMU_CLOCK_HOST:
> + if (rtc_base_type == RTC_BASE_DATETIME) {
> + value -= rtc_host_datetime_offset;
> + }
> + break;
> + default:
> + assert(0);
> + }
> + return value;
> +}
> +
> +void qemu_get_timedate(struct tm *tm, int offset)
> +{
> + time_t ti = qemu_ref_timedate(rtc_clock);
> +
> + ti += offset;
> +
> + switch (rtc_base_type) {
> + case RTC_BASE_DATETIME:
> + case RTC_BASE_UTC:
> + gmtime_r(&ti, tm);
> + break;
> + case RTC_BASE_LOCALTIME:
> + localtime_r(&ti, tm);
> + break;
> + }
> +}
> +
> +int qemu_timedate_diff(struct tm *tm)
> +{
> + time_t seconds;
> +
> + switch (rtc_base_type) {
> + case RTC_BASE_DATETIME:
> + case RTC_BASE_UTC:
> + seconds = mktimegm(tm);
> + break;
> + case RTC_BASE_LOCALTIME:
> + {
> + struct tm tmp = *tm;
> + tmp.tm_isdst = -1; /* use timezone to figure it out */
> + seconds = mktime(&tmp);
> + break;
> + }
> + default:
> + abort();
> + }
> +
> + return seconds - qemu_ref_timedate(QEMU_CLOCK_HOST);
> +}
> +
> +static void configure_rtc_base_datetime(const char *startdate)
> +{
> + time_t rtc_start_datetime;
> + struct tm tm;
> +
> + if (sscanf(startdate, "%d-%d-%dT%d:%d:%d", &tm.tm_year, &tm.tm_mon,
> + &tm.tm_mday, &tm.tm_hour, &tm.tm_min, &tm.tm_sec) == 6) {
> + /* OK */
> + } else if (sscanf(startdate, "%d-%d-%d",
> + &tm.tm_year, &tm.tm_mon, &tm.tm_mday) == 3) {
> + tm.tm_hour = 0;
> + tm.tm_min = 0;
> + tm.tm_sec = 0;
> + } else {
> + goto date_fail;
> + }
> + tm.tm_year -= 1900;
> + tm.tm_mon--;
> + rtc_start_datetime = mktimegm(&tm);
> + if (rtc_start_datetime == -1) {
> + date_fail:
> + error_report("invalid datetime format");
> + error_printf("valid formats: "
> + "'2006-06-17T16:01:21' or '2006-06-17'\n");
> + exit(1);
> + }
> + rtc_host_datetime_offset = rtc_ref_start_datetime - rtc_start_datetime;
> + rtc_ref_start_datetime = rtc_start_datetime;
> +}
> +
> +void configure_rtc(QemuOpts *opts)
> +{
> + const char *value;
> +
> + /* Set defaults */
> + rtc_clock = QEMU_CLOCK_HOST;
> + rtc_ref_start_datetime = qemu_clock_get_ms(QEMU_CLOCK_HOST) / 1000;
> + rtc_realtime_clock_offset = qemu_clock_get_ms(QEMU_CLOCK_REALTIME) / 1000;
> +
> + value = qemu_opt_get(opts, "base");
> + if (value) {
> + if (!strcmp(value, "utc")) {
> + rtc_base_type = RTC_BASE_UTC;
> + } else if (!strcmp(value, "localtime")) {
> + Error *blocker = NULL;
> + rtc_base_type = RTC_BASE_LOCALTIME;
> + error_setg(&blocker, QERR_REPLAY_NOT_SUPPORTED,
> + "-rtc base=localtime");
> + replay_add_blocker(blocker);
> + } else {
> + rtc_base_type = RTC_BASE_DATETIME;
> + configure_rtc_base_datetime(value);
> + }
> + }
> + value = qemu_opt_get(opts, "clock");
> + if (value) {
> + if (!strcmp(value, "host")) {
> + rtc_clock = QEMU_CLOCK_HOST;
> + } else if (!strcmp(value, "rt")) {
> + rtc_clock = QEMU_CLOCK_REALTIME;
> + } else if (!strcmp(value, "vm")) {
> + rtc_clock = QEMU_CLOCK_VIRTUAL;
> + } else {
> + error_report("invalid option value '%s'", value);
> + exit(1);
> + }
> + }
> + value = qemu_opt_get(opts, "driftfix");
> + if (value) {
> + if (!strcmp(value, "slew")) {
> + object_register_sugar_prop("mc146818rtc",
> + "lost_tick_policy",
> + "slew");
> + } else if (!strcmp(value, "none")) {
> + /* discard is default */
> + } else {
> + error_report("invalid option value '%s'", value);
> + exit(1);
> + }
> + }
> +}
> diff --git a/softmmu/vl.c b/softmmu/vl.c
> index 7e13bb4a59..c9bb205c42 100644
> --- a/softmmu/vl.c
> +++ b/softmmu/vl.c
> @@ -152,16 +152,6 @@ bool enable_cpu_pm = false;
> int nb_nics;
> NICInfo nd_table[MAX_NICS];
> int autostart = 1;
> -static enum {
> - RTC_BASE_UTC,
> - RTC_BASE_LOCALTIME,
> - RTC_BASE_DATETIME,
> -} rtc_base_type = RTC_BASE_UTC;
> -static time_t rtc_ref_start_datetime;
> -static int rtc_realtime_clock_offset; /* used only with QEMU_CLOCK_REALTIME */
> -static int rtc_host_datetime_offset = -1; /* valid & used only with
> - RTC_BASE_DATETIME */
> -QEMUClockType rtc_clock;
> int vga_interface_type = VGA_NONE;
> static const char *vga_model = NULL;
> static DisplayOptions dpy;
> @@ -766,152 +756,6 @@ void qemu_system_vmstop_request(RunState state)
> qemu_mutex_unlock(&vmstop_lock);
> qemu_notify_event();
> }
> -
> -/***********************************************************/
> -/* RTC reference time/date access */
> -static time_t qemu_ref_timedate(QEMUClockType clock)
> -{
> - time_t value = qemu_clock_get_ms(clock) / 1000;
> - switch (clock) {
> - case QEMU_CLOCK_REALTIME:
> - value -= rtc_realtime_clock_offset;
> - /* fall through */
> - case QEMU_CLOCK_VIRTUAL:
> - value += rtc_ref_start_datetime;
> - break;
> - case QEMU_CLOCK_HOST:
> - if (rtc_base_type == RTC_BASE_DATETIME) {
> - value -= rtc_host_datetime_offset;
> - }
> - break;
> - default:
> - assert(0);
> - }
> - return value;
> -}
> -
> -void qemu_get_timedate(struct tm *tm, int offset)
> -{
> - time_t ti = qemu_ref_timedate(rtc_clock);
> -
> - ti += offset;
> -
> - switch (rtc_base_type) {
> - case RTC_BASE_DATETIME:
> - case RTC_BASE_UTC:
> - gmtime_r(&ti, tm);
> - break;
> - case RTC_BASE_LOCALTIME:
> - localtime_r(&ti, tm);
> - break;
> - }
> -}
> -
> -int qemu_timedate_diff(struct tm *tm)
> -{
> - time_t seconds;
> -
> - switch (rtc_base_type) {
> - case RTC_BASE_DATETIME:
> - case RTC_BASE_UTC:
> - seconds = mktimegm(tm);
> - break;
> - case RTC_BASE_LOCALTIME:
> - {
> - struct tm tmp = *tm;
> - tmp.tm_isdst = -1; /* use timezone to figure it out */
> - seconds = mktime(&tmp);
> - break;
> - }
> - default:
> - abort();
> - }
> -
> - return seconds - qemu_ref_timedate(QEMU_CLOCK_HOST);
> -}
> -
> -static void configure_rtc_base_datetime(const char *startdate)
> -{
> - time_t rtc_start_datetime;
> - struct tm tm;
> -
> - if (sscanf(startdate, "%d-%d-%dT%d:%d:%d", &tm.tm_year, &tm.tm_mon,
> - &tm.tm_mday, &tm.tm_hour, &tm.tm_min, &tm.tm_sec) == 6) {
> - /* OK */
> - } else if (sscanf(startdate, "%d-%d-%d",
> - &tm.tm_year, &tm.tm_mon, &tm.tm_mday) == 3) {
> - tm.tm_hour = 0;
> - tm.tm_min = 0;
> - tm.tm_sec = 0;
> - } else {
> - goto date_fail;
> - }
> - tm.tm_year -= 1900;
> - tm.tm_mon--;
> - rtc_start_datetime = mktimegm(&tm);
> - if (rtc_start_datetime == -1) {
> - date_fail:
> - error_report("invalid datetime format");
> - error_printf("valid formats: "
> - "'2006-06-17T16:01:21' or '2006-06-17'\n");
> - exit(1);
> - }
> - rtc_host_datetime_offset = rtc_ref_start_datetime - rtc_start_datetime;
> - rtc_ref_start_datetime = rtc_start_datetime;
> -}
> -
> -static void configure_rtc(QemuOpts *opts)
> -{
> - const char *value;
> -
> - /* Set defaults */
> - rtc_clock = QEMU_CLOCK_HOST;
> - rtc_ref_start_datetime = qemu_clock_get_ms(QEMU_CLOCK_HOST) / 1000;
> - rtc_realtime_clock_offset = qemu_clock_get_ms(QEMU_CLOCK_REALTIME) / 1000;
> -
> - value = qemu_opt_get(opts, "base");
> - if (value) {
> - if (!strcmp(value, "utc")) {
> - rtc_base_type = RTC_BASE_UTC;
> - } else if (!strcmp(value, "localtime")) {
> - Error *blocker = NULL;
> - rtc_base_type = RTC_BASE_LOCALTIME;
> - error_setg(&blocker, QERR_REPLAY_NOT_SUPPORTED,
> - "-rtc base=localtime");
> - replay_add_blocker(blocker);
> - } else {
> - rtc_base_type = RTC_BASE_DATETIME;
> - configure_rtc_base_datetime(value);
> - }
> - }
> - value = qemu_opt_get(opts, "clock");
> - if (value) {
> - if (!strcmp(value, "host")) {
> - rtc_clock = QEMU_CLOCK_HOST;
> - } else if (!strcmp(value, "rt")) {
> - rtc_clock = QEMU_CLOCK_REALTIME;
> - } else if (!strcmp(value, "vm")) {
> - rtc_clock = QEMU_CLOCK_VIRTUAL;
> - } else {
> - error_report("invalid option value '%s'", value);
> - exit(1);
> - }
> - }
> - value = qemu_opt_get(opts, "driftfix");
> - if (value) {
> - if (!strcmp(value, "slew")) {
> - object_register_sugar_prop("mc146818rtc",
> - "lost_tick_policy",
> - "slew");
> - } else if (!strcmp(value, "none")) {
> - /* discard is default */
> - } else {
> - error_report("invalid option value '%s'", value);
> - exit(1);
> - }
> - }
> -}
> -
> static int parse_name(void *opaque, QemuOpts *opts, Error **errp)
> {
> const char *proc_name;
next prev parent reply other threads:[~2020-11-27 12:44 UTC|newest]
Thread overview: 70+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-11-23 14:13 [PATCH v3 00/36] cleanup qemu_init and make sense of command line processing Paolo Bonzini
2020-11-23 14:14 ` [PATCH 01/36] vl: extract validation of -smp to machine.c Paolo Bonzini
2020-11-23 14:14 ` [PATCH 02/36] vl: remove bogus check Paolo Bonzini
2020-11-23 14:14 ` [PATCH 03/36] vl: split various early command line options to a separate function Paolo Bonzini
2020-11-26 16:47 ` Igor Mammedov
2020-11-23 14:14 ` [PATCH 04/36] vl: move various initialization routines out of qemu_init Paolo Bonzini
2020-11-23 14:14 ` [PATCH 05/36] vl: extract qemu_init_subsystems Paolo Bonzini
2020-11-23 14:14 ` [PATCH 06/36] vl: move prelaunch part of qemu_init to new functions Paolo Bonzini
2020-11-23 14:14 ` [PATCH 07/36] vl: extract various command line validation snippets to a new function Paolo Bonzini
2020-11-23 14:14 ` [PATCH 08/36] vl: preconfig and loadvm are mutually exclusive Paolo Bonzini
2020-11-23 14:14 ` [PATCH 09/36] vl: extract various command line desugaring snippets to a new function Paolo Bonzini
2020-11-23 14:14 ` [PATCH 10/36] qemu-option: restrict qemu_opts_set to merge-lists QemuOpts Paolo Bonzini
2020-11-23 14:14 ` [PATCH 11/36] vl: create "-net nic -net user" default earlier Paolo Bonzini
2020-11-23 14:14 ` [PATCH 12/36] vl: load plugins as late as possible Paolo Bonzini
2020-11-26 16:54 ` Igor Mammedov
2020-11-23 14:14 ` [PATCH 13/36] vl: move semihosting command line fallback to qemu_init_board Paolo Bonzini
2020-11-26 17:10 ` Igor Mammedov
2020-11-27 5:03 ` Paolo Bonzini
2020-11-27 10:31 ` Igor Mammedov
2020-11-27 11:22 ` Paolo Bonzini
2020-11-27 12:12 ` Igor Mammedov
2020-11-27 12:22 ` Paolo Bonzini
2020-11-23 14:14 ` [PATCH 14/36] vl: extract default devices to separate functions Paolo Bonzini
2020-11-26 17:29 ` Igor Mammedov
2020-11-23 14:14 ` [PATCH 15/36] vl: move CHECKPOINT_INIT after preconfig Paolo Bonzini
2020-11-26 17:36 ` Igor Mammedov
2020-11-23 14:14 ` [PATCH 16/36] vl: separate qemu_create_early_backends Paolo Bonzini
2020-11-23 14:14 ` [PATCH 17/36] vl: separate qemu_create_late_backends Paolo Bonzini
2020-11-23 14:14 ` [PATCH 18/36] vl: separate qemu_create_machine Paolo Bonzini
2020-11-23 14:14 ` [PATCH 19/36] vl: separate qemu_apply_machine_options Paolo Bonzini
2020-11-23 14:14 ` [PATCH 20/36] vl: separate qemu_resolve_machine_memdev Paolo Bonzini
2020-11-26 17:39 ` Igor Mammedov
2020-11-23 14:14 ` [PATCH 21/36] vl: initialize displays before preconfig loop Paolo Bonzini
2020-11-26 17:51 ` Igor Mammedov
2020-11-23 14:14 ` [PATCH 22/36] vl: move -global check earlier Paolo Bonzini
2020-11-26 17:55 ` Igor Mammedov
2020-11-23 14:14 ` [PATCH 23/36] migration, vl: start migration via qmp_migrate_incoming Paolo Bonzini
2020-11-26 18:04 ` Igor Mammedov
2020-11-23 14:14 ` [PATCH 24/36] vl: start VM via qmp_cont Paolo Bonzini
2020-11-23 14:14 ` [PATCH 25/36] hmp: introduce cmd_available Paolo Bonzini
2020-11-23 14:14 ` [PATCH 26/36] remove preconfig state Paolo Bonzini
2020-11-26 18:55 ` Igor Mammedov
2020-11-27 5:19 ` Paolo Bonzini
2020-11-27 10:50 ` Igor Mammedov
2020-11-27 11:50 ` Paolo Bonzini
2020-11-30 12:41 ` Igor Mammedov
2020-11-23 14:14 ` [PATCH 27/36] vl: remove separate preconfig main_loop Paolo Bonzini
2020-11-30 12:46 ` Igor Mammedov
2020-11-23 14:14 ` [PATCH 28/36] vl: allow -incoming defer with -preconfig Paolo Bonzini
2020-11-27 10:51 ` Igor Mammedov
2020-11-23 14:14 ` [PATCH 29/36] vl: extract softmmu/datadir.c Paolo Bonzini
2020-11-27 12:06 ` Igor Mammedov
2020-11-23 14:14 ` [PATCH 30/36] vl: extract machine done notifiers Paolo Bonzini
2020-11-27 12:14 ` Igor Mammedov
2020-11-23 14:14 ` [PATCH 31/36] vl: extract softmmu/rtc.c Paolo Bonzini
2020-11-27 12:43 ` Igor Mammedov [this message]
2020-11-23 14:14 ` [PATCH 32/36] vl: extract softmmu/runstate.c Paolo Bonzini
2020-11-27 12:59 ` Igor Mammedov
2020-11-23 14:14 ` [PATCH 33/36] vl: extract softmmu/globals.c Paolo Bonzini
2020-11-27 13:19 ` Igor Mammedov
2020-11-23 14:14 ` [PATCH 34/36] vl: remove serial_max_hds Paolo Bonzini
2020-11-27 13:11 ` Igor Mammedov
2020-11-23 14:14 ` [PATCH 35/36] vl: clean up -boot variables Paolo Bonzini
2020-11-27 13:12 ` Igor Mammedov
2020-11-23 14:14 ` [PATCH 36/36] vl: move all generic initialization out of vl.c Paolo Bonzini
2020-11-27 13:30 ` Igor Mammedov
2020-11-27 12:00 ` [PATCH 37/36] machine: introduce MachineInitPhase Paolo Bonzini
2020-11-27 13:29 ` Igor Mammedov
2020-11-27 15:29 ` Paolo Bonzini
2020-11-30 12:50 ` [PATCH v3 00/36] cleanup qemu_init and make sense of command line processing Igor Mammedov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201127134301.4c16886b@redhat.com \
--to=imammedo@redhat.com \
--cc=pbonzini@redhat.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).