qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Paolo Bonzini <pbonzini@redhat.com>
To: qemu-devel@nongnu.org
Subject: [PULL 029/113] ppc: remove bios_name
Date: Wed,  2 Dec 2020 03:07:25 -0500	[thread overview]
Message-ID: <20201202080849.4125477-30-pbonzini@redhat.com> (raw)
In-Reply-To: <20201202080849.4125477-1-pbonzini@redhat.com>

Cc: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20201026143028.3034018-11-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
 hw/ppc/e500.c          | 4 ++--
 hw/ppc/mac_newworld.c  | 4 +---
 hw/ppc/mac_oldworld.c  | 4 +---
 hw/ppc/pnv.c           | 5 +----
 hw/ppc/ppc405_boards.c | 6 ++----
 hw/ppc/prep.c          | 4 +---
 hw/ppc/spapr.c         | 4 +---
 7 files changed, 9 insertions(+), 22 deletions(-)

diff --git a/hw/ppc/e500.c b/hw/ppc/e500.c
index ae39b9358e..153a74c98c 100644
--- a/hw/ppc/e500.c
+++ b/hw/ppc/e500.c
@@ -1035,7 +1035,7 @@ void ppce500_init(MachineState *machine)
      * -kernel to users but allows them to run through u-boot as well.
      */
     kernel_as_payload = false;
-    if (bios_name == NULL) {
+    if (machine->firmware == NULL) {
         if (machine->kernel_filename) {
             payload_name = machine->kernel_filename;
             kernel_as_payload = true;
@@ -1043,7 +1043,7 @@ void ppce500_init(MachineState *machine)
             payload_name = "u-boot.e500";
         }
     } else {
-        payload_name = bios_name;
+        payload_name = machine->firmware;
     }
 
     filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, payload_name);
diff --git a/hw/ppc/mac_newworld.c b/hw/ppc/mac_newworld.c
index f9a1cc8944..61c63819df 100644
--- a/hw/ppc/mac_newworld.c
+++ b/hw/ppc/mac_newworld.c
@@ -109,6 +109,7 @@ static void ppc_core99_reset(void *opaque)
 static void ppc_core99_init(MachineState *machine)
 {
     ram_addr_t ram_size = machine->ram_size;
+    const char *bios_name = machine->firmware ?: PROM_FILENAME;
     const char *kernel_filename = machine->kernel_filename;
     const char *kernel_cmdline = machine->kernel_cmdline;
     const char *initrd_filename = machine->initrd_filename;
@@ -161,9 +162,6 @@ static void ppc_core99_init(MachineState *machine)
                            &error_fatal);
     memory_region_add_subregion(get_system_memory(), PROM_BASE, bios);
 
-    if (!bios_name) {
-        bios_name = PROM_FILENAME;
-    }
     filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, bios_name);
     if (filename) {
         /* Load OpenBIOS (ELF) */
diff --git a/hw/ppc/mac_oldworld.c b/hw/ppc/mac_oldworld.c
index 6c59aa5601..11623e8e67 100644
--- a/hw/ppc/mac_oldworld.c
+++ b/hw/ppc/mac_oldworld.c
@@ -83,6 +83,7 @@ static void ppc_heathrow_reset(void *opaque)
 static void ppc_heathrow_init(MachineState *machine)
 {
     ram_addr_t ram_size = machine->ram_size;
+    const char *bios_name = machine->firmware ?: PROM_FILENAME;
     const char *boot_device = machine->boot_order;
     PowerPCCPU *cpu = NULL;
     CPUPPCState *env = NULL;
@@ -130,9 +131,6 @@ static void ppc_heathrow_init(MachineState *machine)
                            &error_fatal);
     memory_region_add_subregion(get_system_memory(), PROM_BASE, bios);
 
-    if (!bios_name) {
-        bios_name = PROM_FILENAME;
-    }
     filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, bios_name);
     if (filename) {
         /* Load OpenBIOS (ELF) */
diff --git a/hw/ppc/pnv.c b/hw/ppc/pnv.c
index 50ebd4a484..53a5121cab 100644
--- a/hw/ppc/pnv.c
+++ b/hw/ppc/pnv.c
@@ -713,6 +713,7 @@ static void pnv_chip_power10_pic_print_info(PnvChip *chip, Monitor *mon)
 
 static void pnv_init(MachineState *machine)
 {
+    const char *bios_name = machine->firmware ?: FW_FILE_NAME;
     PnvMachineState *pnv = PNV_MACHINE(machine);
     MachineClass *mc = MACHINE_GET_CLASS(machine);
     char *fw_filename;
@@ -739,10 +740,6 @@ static void pnv_init(MachineState *machine)
     pnv->pnor = PNV_PNOR(dev);
 
     /* load skiboot firmware  */
-    if (bios_name == NULL) {
-        bios_name = FW_FILE_NAME;
-    }
-
     fw_filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, bios_name);
     if (!fw_filename) {
         error_report("Could not find OPAL firmware '%s'", bios_name);
diff --git a/hw/ppc/ppc405_boards.c b/hw/ppc/ppc405_boards.c
index 4687715b15..c867e46330 100644
--- a/hw/ppc/ppc405_boards.c
+++ b/hw/ppc/ppc405_boards.c
@@ -141,6 +141,7 @@ static void ref405ep_fpga_init(MemoryRegion *sysmem, uint32_t base)
 static void ref405ep_init(MachineState *machine)
 {
     MachineClass *mc = MACHINE_GET_CLASS(machine);
+    const char *bios_name = machine->firmware ?: BIOS_FILENAME;
     const char *kernel_filename = machine->kernel_filename;
     const char *kernel_cmdline = machine->kernel_cmdline;
     const char *initrd_filename = machine->initrd_filename;
@@ -206,8 +207,6 @@ static void ref405ep_init(MachineState *machine)
         memory_region_init_rom(bios, NULL, "ef405ep.bios", BIOS_SIZE,
                                &error_fatal);
 
-        if (bios_name == NULL)
-            bios_name = BIOS_FILENAME;
         filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, bios_name);
         if (filename) {
             bios_size = load_image_size(filename,
@@ -425,6 +424,7 @@ static void taihu_cpld_init(MemoryRegion *sysmem, uint32_t base)
 static void taihu_405ep_init(MachineState *machine)
 {
     MachineClass *mc = MACHINE_GET_CLASS(machine);
+    const char *bios_name = machine->firmware ?: BIOS_FILENAME;
     const char *kernel_filename = machine->kernel_filename;
     const char *initrd_filename = machine->initrd_filename;
     char *filename;
@@ -475,8 +475,6 @@ static void taihu_405ep_init(MachineState *machine)
     } else
 #endif
     {
-        if (bios_name == NULL)
-            bios_name = BIOS_FILENAME;
         bios = g_new(MemoryRegion, 1);
         memory_region_init_rom(bios, NULL, "taihu_405ep.bios", BIOS_SIZE,
                                &error_fatal);
diff --git a/hw/ppc/prep.c b/hw/ppc/prep.c
index 4a0cb434a6..c6b9d1ddcb 100644
--- a/hw/ppc/prep.c
+++ b/hw/ppc/prep.c
@@ -237,6 +237,7 @@ static int prep_set_cmos_checksum(DeviceState *dev, void *opaque)
 
 static void ibm_40p_init(MachineState *machine)
 {
+    const char *bios_name = machine->firmware ?: "openbios-ppc";
     CPUPPCState *env = NULL;
     uint16_t cmos_checksum;
     PowerPCCPU *cpu;
@@ -271,9 +272,6 @@ static void ibm_40p_init(MachineState *machine)
 
     /* PCI host */
     dev = qdev_new("raven-pcihost");
-    if (!bios_name) {
-        bios_name = "openbios-ppc";
-    }
     qdev_prop_set_string(dev, "bios-name", bios_name);
     qdev_prop_set_uint32(dev, "elf-machine", PPC_ELF_MACHINE);
     pcihost = SYS_BUS_DEVICE(dev);
diff --git a/hw/ppc/spapr.c b/hw/ppc/spapr.c
index 12a012d9dd..cd8be98caf 100644
--- a/hw/ppc/spapr.c
+++ b/hw/ppc/spapr.c
@@ -2657,6 +2657,7 @@ static void spapr_machine_init(MachineState *machine)
     SpaprMachineState *spapr = SPAPR_MACHINE(machine);
     SpaprMachineClass *smc = SPAPR_MACHINE_GET_CLASS(machine);
     MachineClass *mc = MACHINE_GET_CLASS(machine);
+    const char *bios_name = machine->firmware ?: FW_FILE_NAME;
     const char *kernel_filename = machine->kernel_filename;
     const char *initrd_filename = machine->initrd_filename;
     PCIHostState *phb;
@@ -2980,9 +2981,6 @@ static void spapr_machine_init(MachineState *machine)
         }
     }
 
-    if (bios_name == NULL) {
-        bios_name = FW_FILE_NAME;
-    }
     filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, bios_name);
     if (!filename) {
         error_report("Could not find LPAR firmware '%s'", bios_name);
-- 
2.26.2




  parent reply	other threads:[~2020-12-02  8:35 UTC|newest]

Thread overview: 116+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-12-02  8:06 [PULL 000/113] First batch of misc (i386, kernel-doc, memory, vl.c) changes for QEMU 6.0 Paolo Bonzini
2020-12-02  8:06 ` [PULL 001/113] target/i386: fix operand order for PDEP and PEXT Paolo Bonzini
2020-12-02  8:06 ` [PULL 002/113] target/i386: Support up to 32768 CPUs without IRQ remapping Paolo Bonzini
2020-12-02  8:06 ` [PULL 003/113] target/i386: seg_helper: Correct segement selector nullification in the RET/IRET helper Paolo Bonzini
2020-12-02  8:07 ` [PULL 004/113] WHPX: support for the kernel-irqchip on/off Paolo Bonzini
2020-12-02  8:07 ` [PULL 005/113] docs/devel/loads-stores: Add regexp for DMA functions Paolo Bonzini
2020-12-02  8:07 ` [PULL 006/113] qom: eliminate identical functions Paolo Bonzini
2020-12-02  8:07 ` [PULL 007/113] dma: Document address_space_map/address_space_unmap() prototypes Paolo Bonzini
2020-12-02  8:07 ` [PULL 008/113] dma: Let dma_memory_set() propagate MemTxResult Paolo Bonzini
2020-12-02  8:07 ` [PULL 009/113] dma: Let dma_memory_rw() " Paolo Bonzini
2020-12-02  8:07 ` [PULL 010/113] dma: Let dma_memory_read() " Paolo Bonzini
2020-12-02  8:07 ` [PULL 011/113] dma: Let dma_memory_write() " Paolo Bonzini
2020-12-02  8:07 ` [PULL 012/113] pci: Let pci_dma_rw() " Paolo Bonzini
2020-12-02  8:07 ` [PULL 013/113] pci: Let pci_dma_read() " Paolo Bonzini
2020-12-02  8:07 ` [PULL 014/113] pci: Let pci_dma_write() " Paolo Bonzini
2020-12-02  8:07 ` [PULL 015/113] hw/ssi/aspeed_smc: Rename 'max_slaves' variable as 'max_peripherals' Paolo Bonzini
2020-12-02  8:07 ` [PULL 016/113] hw/ssi: Update coding style to make checkpatch.pl happy Paolo Bonzini
2020-12-02  8:07 ` [PULL 017/113] hw/ssi: Rename SSI 'slave' as 'peripheral' Paolo Bonzini
2020-12-02  8:07 ` [PULL 018/113] hw/core/stream: Rename StreamSlave as StreamSink Paolo Bonzini
2020-12-02  8:07 ` [PULL 019/113] hw/dma/xilinx_axidma: " Paolo Bonzini
2020-12-02  8:07 ` [PULL 020/113] hw/net/xilinx_axienet: " Paolo Bonzini
2020-12-02  8:07 ` [PULL 021/113] alpha: remove bios_name Paolo Bonzini
2020-12-02  8:07 ` [PULL 022/113] arm: " Paolo Bonzini
2020-12-02  8:07 ` [PULL 023/113] hppa: " Paolo Bonzini
2020-12-02  8:07 ` [PULL 024/113] i386: " Paolo Bonzini
2020-12-02  8:07 ` [PULL 025/113] lm32: " Paolo Bonzini
2020-12-02  8:07 ` [PULL 026/113] m68k: " Paolo Bonzini
2020-12-02  8:07 ` [PULL 027/113] mips: " Paolo Bonzini
2020-12-02  8:07 ` [PULL 028/113] moxie: " Paolo Bonzini
2020-12-02  8:07 ` Paolo Bonzini [this message]
2020-12-02  8:07 ` [PULL 030/113] rx: move BIOS load from MCU to board Paolo Bonzini
2020-12-02  8:07 ` [PULL 031/113] s390: remove bios_name Paolo Bonzini
2020-12-02  8:07 ` [PULL 032/113] sh4: " Paolo Bonzini
2020-12-02  8:07 ` [PULL 033/113] sparc: " Paolo Bonzini
2020-12-02  8:07 ` [PULL 034/113] digic: " Paolo Bonzini
2020-12-02  8:07 ` [PULL 035/113] vl: " Paolo Bonzini
2020-12-02  8:07 ` [PULL 036/113] arm: do not use ram_size global Paolo Bonzini
2020-12-02  8:07 ` [PULL 037/113] cris: " Paolo Bonzini
2020-12-02  8:07 ` [PULL 038/113] hppa: " Paolo Bonzini
2020-12-02  8:07 ` [PULL 039/113] i386: " Paolo Bonzini
2020-12-02  8:07 ` [PULL 040/113] m68k: " Paolo Bonzini
2020-12-02  8:07 ` [PULL 041/113] microblaze: " Paolo Bonzini
2020-12-02  8:07 ` [PULL 042/113] mips: " Paolo Bonzini
2020-12-02  8:07 ` [PULL 043/113] moxie: " Paolo Bonzini
2020-12-02  8:07 ` [PULL 044/113] nios2: " Paolo Bonzini
2020-12-02  8:07 ` [PULL 045/113] ppc: " Paolo Bonzini
2020-12-02  8:07 ` [PULL 046/113] riscv: " Paolo Bonzini
2020-12-02  8:07 ` [PULL 047/113] s390x: " Paolo Bonzini
2020-12-02  8:07 ` [PULL 048/113] sparc64: " Paolo Bonzini
2020-12-02  8:07 ` [PULL 049/113] make ram_size local to vl.c Paolo Bonzini
2020-12-02  8:07 ` [PULL 050/113] hw/char/serial: Clean up unnecessary code Paolo Bonzini
2020-12-02  8:07 ` [PULL 051/113] treewide: do not use short-form boolean options Paolo Bonzini
2020-12-02  8:07 ` [PULL 052/113] vl: extract validation of -smp to machine.c Paolo Bonzini
2020-12-02  8:07 ` [PULL 053/113] vl: remove bogus check Paolo Bonzini
2020-12-02  8:07 ` [PULL 054/113] vl: split various early command line options to a separate function Paolo Bonzini
2020-12-02  8:07 ` [PULL 055/113] vl: move various initialization routines out of qemu_init Paolo Bonzini
2020-12-02  8:07 ` [PULL 056/113] vl: extract qemu_init_subsystems Paolo Bonzini
2020-12-02  8:07 ` [PULL 057/113] vl: move prelaunch part of qemu_init to new functions Paolo Bonzini
2020-12-02  8:07 ` [PULL 058/113] vl: extract various command line validation snippets to a new function Paolo Bonzini
2020-12-02  8:07 ` [PULL 059/113] vl: preconfig and loadvm are mutually exclusive Paolo Bonzini
2020-12-02  8:07 ` [PULL 060/113] vl: extract various command line desugaring snippets to a new function Paolo Bonzini
2020-12-02  8:07 ` [PULL 061/113] qemu-option: restrict qemu_opts_set to merge-lists QemuOpts Paolo Bonzini
2020-12-02  8:07 ` [PULL 062/113] vl: create "-net nic -net user" default earlier Paolo Bonzini
2020-12-02  8:07 ` [PULL 063/113] vl: load plugins as late as possible Paolo Bonzini
2020-12-02  8:08 ` [PULL 064/113] vl: extract default devices to separate functions Paolo Bonzini
2020-12-02  8:08 ` [PULL 065/113] vl: move CHECKPOINT_INIT after preconfig Paolo Bonzini
2020-12-02  8:08 ` [PULL 066/113] vl: separate qemu_create_early_backends Paolo Bonzini
2020-12-02  8:08 ` [PULL 067/113] vl: separate qemu_create_late_backends Paolo Bonzini
2020-12-02  8:08 ` [PULL 068/113] vl: separate qemu_create_machine Paolo Bonzini
2020-12-02  8:08 ` [PULL 069/113] vl: separate qemu_apply_machine_options Paolo Bonzini
2020-12-02  8:08 ` [PULL 070/113] vl: separate qemu_resolve_machine_memdev Paolo Bonzini
2020-12-02  8:08 ` [PULL 071/113] vl: initialize displays before preconfig loop Paolo Bonzini
2020-12-02  8:08 ` [PULL 072/113] vl: move -global check earlier Paolo Bonzini
2020-12-02  8:08 ` [PULL 073/113] migration, vl: start migration via qmp_migrate_incoming Paolo Bonzini
2020-12-02  8:08 ` [PULL 074/113] vl: start VM via qmp_cont Paolo Bonzini
2020-12-02  8:08 ` [PULL 075/113] hmp: introduce cmd_available Paolo Bonzini
2020-12-02  8:08 ` [PULL 076/113] vl: extract softmmu/datadir.c Paolo Bonzini
2020-12-02  8:08 ` [PULL 077/113] vl: extract machine done notifiers Paolo Bonzini
2020-12-02  8:08 ` [PULL 078/113] vl: extract softmmu/rtc.c Paolo Bonzini
2020-12-02  8:08 ` [PULL 079/113] vl: remove serial_max_hds Paolo Bonzini
2020-12-02  8:08 ` [PULL 080/113] vl: clean up -boot variables Paolo Bonzini
2020-12-02  8:08 ` [PULL 081/113] config-file: move -set implementation to vl.c Paolo Bonzini
2020-12-02  8:08 ` [PULL 082/113] docs: temporarily disable the kernel-doc extension Paolo Bonzini
2020-12-02  8:08 ` [PULL 083/113] kernel-doc: fix processing nested structs with attributes Paolo Bonzini
2020-12-02  8:08 ` [PULL 084/113] kernel-doc: add support for ____cacheline_aligned_in_smp attribute Paolo Bonzini
2020-12-02  8:08 ` [PULL 085/113] scripts/kernel-doc: Add support for named variable macro arguments Paolo Bonzini
2020-12-02  8:08 ` [PULL 086/113] scripts: kernel-doc: proper handle @foo->bar() Paolo Bonzini
2020-12-02  8:08 ` [PULL 087/113] scripts: kernel-doc: accept negation like !@var Paolo Bonzini
2020-12-02  8:08 ` [PULL 088/113] scripts: kernel-doc: accept blank lines on parameter description Paolo Bonzini
2020-12-02  8:08 ` [PULL 089/113] Replace HTTP links with HTTPS ones: documentation Paolo Bonzini
2020-12-02  8:08 ` [PULL 090/113] scripts/kernel-doc: parse __ETHTOOL_DECLARE_LINK_MODE_MASK Paolo Bonzini
2020-12-02  8:08 ` [PULL 091/113] scripts/kernel-doc: handle function pointer prototypes Paolo Bonzini
2020-12-02  8:08 ` [PULL 092/113] scripts/kernel-doc: optionally treat warnings as errors Paolo Bonzini
2020-12-02  8:08 ` [PULL 093/113] kernel-doc: include line numbers for function prototypes Paolo Bonzini
2020-12-02  8:08 ` [PULL 094/113] kernel-doc: add support for ____cacheline_aligned attribute Paolo Bonzini
2020-12-02  8:08 ` [PULL 095/113] scripts: kernel-doc: add support for typedef enum Paolo Bonzini
2020-12-02  8:08 ` [PULL 096/113] Revert "scripts/kerneldoc: For Sphinx 3 use c:macro for macros with arguments" Paolo Bonzini
2020-12-02  8:08 ` [PULL 097/113] Revert "kernel-doc: Use c:struct for Sphinx 3.0 and later" Paolo Bonzini
2020-12-02  8:08 ` [PULL 098/113] scripts: kernel-doc: make it more compatible with Sphinx 3.x Paolo Bonzini
2020-12-02  8:08 ` [PULL 099/113] scripts: kernel-doc: use a less pedantic markup for funcs on " Paolo Bonzini
2020-12-02  8:08 ` [PULL 100/113] scripts: kernel-doc: fix troubles with line counts Paolo Bonzini
2020-12-02  8:08 ` [PULL 101/113] scripts: kernel-doc: reimplement -nofunction argument Paolo Bonzini
2020-12-02  8:08 ` [PULL 102/113] scripts: kernel-doc: fix typedef identification Paolo Bonzini
2020-12-02  8:08 ` [PULL 103/113] scripts: kernel-doc: don't mangle with parameter list Paolo Bonzini
2020-12-02  8:08 ` [PULL 104/113] scripts: kernel-doc: allow passing desired Sphinx C domain dialect Paolo Bonzini
2020-12-02  8:08 ` [PULL 105/113] scripts: kernel-doc: fix line number handling Paolo Bonzini
2020-12-02  8:08 ` [PULL 106/113] scripts: kernel-doc: try to use c:function if possible Paolo Bonzini
2020-12-02  8:08 ` [PULL 107/113] Revert "kernel-doc: Handle function typedefs without asterisks" Paolo Bonzini
2020-12-02  8:08 ` [PULL 108/113] Revert "kernel-doc: Handle function typedefs that return pointers" Paolo Bonzini
2020-12-02  8:08 ` [PULL 109/113] scripts: kernel-doc: fix typedef parsing Paolo Bonzini
2020-12-02  8:08 ` [PULL 110/113] scripts: kernel-doc: split typedef complex regex Paolo Bonzini
2020-12-02  8:08 ` [PULL 111/113] scripts: kernel-doc: use :c:union when needed Paolo Bonzini
2020-12-02  8:08 ` [PULL 112/113] Revert "docs: temporarily disable the kernel-doc extension" Paolo Bonzini
2020-12-02  8:08 ` [PULL 113/113] scripts: kernel-doc: remove unnecesssary change wrt Linux Paolo Bonzini
2020-12-02 11:52 ` [PULL 000/113] First batch of misc (i386, kernel-doc, memory, vl.c) changes for QEMU 6.0 no-reply
2020-12-09 14:16 ` Peter Maydell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201202080849.4125477-30-pbonzini@redhat.com \
    --to=pbonzini@redhat.com \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).