From: Igor Mammedov <imammedo@redhat.com>
To: Paolo Bonzini <pbonzini@redhat.com>
Cc: qemu-devel@nongnu.org
Subject: Re: [PATCH 01/15] remove preconfig state
Date: Mon, 7 Dec 2020 14:57:05 +0100 [thread overview]
Message-ID: <20201207145705.0d5e20ea@redhat.com> (raw)
In-Reply-To: <20201202081854.4126071-2-pbonzini@redhat.com>
On Wed, 2 Dec 2020 03:18:40 -0500
Paolo Bonzini <pbonzini@redhat.com> wrote:
> The preconfig state is only used if -incoming is not specified, which
> makes the RunState state machine more tricky than it need be. However
> there is already an equivalent condition which works even with -incoming,
> namely qdev_hotplug. Use it instead of a separate runstate.
>
> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
> ---
> hw/core/machine-qmp-cmds.c | 5 ++---
> include/qapi/qmp/dispatch.h | 1 +
> monitor/hmp.c | 7 ++++---
> monitor/qmp-cmds.c | 5 ++---
> qapi/qmp-dispatch.c | 5 +----
> qapi/run-state.json | 5 +----
> softmmu/qdev-monitor.c | 12 ++++++++++++
> softmmu/vl.c | 13 ++-----------
> stubs/meson.build | 1 +
> stubs/qmp-command-available.c | 7 +++++++
> tests/qtest/qmp-test.c | 2 +-
> 11 files changed, 34 insertions(+), 29 deletions(-)
> create mode 100644 stubs/qmp-command-available.c
>
> diff --git a/hw/core/machine-qmp-cmds.c b/hw/core/machine-qmp-cmds.c
> index 5362c80a18..cb9387c5f5 100644
> --- a/hw/core/machine-qmp-cmds.c
> +++ b/hw/core/machine-qmp-cmds.c
> @@ -286,9 +286,8 @@ HotpluggableCPUList *qmp_query_hotpluggable_cpus(Error **errp)
>
> void qmp_set_numa_node(NumaOptions *cmd, Error **errp)
> {
> - if (!runstate_check(RUN_STATE_PRECONFIG)) {
> - error_setg(errp, "The command is permitted only in '%s' state",
> - RunState_str(RUN_STATE_PRECONFIG));
> + if (qdev_hotplug) {
it's too late for qmp_set_numa_node(), but given it's temporary
and patch 8/15 changes it to correct state it should be fine.
so
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
> + error_setg(errp, "The command is permitted only before the machine has been created");
> return;
> }
>
> diff --git a/include/qapi/qmp/dispatch.h b/include/qapi/qmp/dispatch.h
> index af8d96c570..1486cac3ef 100644
> --- a/include/qapi/qmp/dispatch.h
> +++ b/include/qapi/qmp/dispatch.h
> @@ -48,6 +48,7 @@ void qmp_disable_command(QmpCommandList *cmds, const char *name);
> void qmp_enable_command(QmpCommandList *cmds, const char *name);
>
> bool qmp_command_is_enabled(const QmpCommand *cmd);
> +bool qmp_command_available(const QmpCommand *cmd, Error **errp);
> const char *qmp_command_name(const QmpCommand *cmd);
> bool qmp_has_success_response(const QmpCommand *cmd);
> QDict *qmp_error_response(Error *err);
> diff --git a/monitor/hmp.c b/monitor/hmp.c
> index d40f4f4391..f2fe192d69 100644
> --- a/monitor/hmp.c
> +++ b/monitor/hmp.c
> @@ -24,6 +24,7 @@
>
> #include "qemu/osdep.h"
> #include <dirent.h>
> +#include "hw/qdev-core.h"
> #include "monitor-internal.h"
> #include "qapi/error.h"
> #include "qapi/qmp/qdict.h"
> @@ -215,7 +216,7 @@ static bool cmd_can_preconfig(const HMPCommand *cmd)
>
> static bool cmd_available(const HMPCommand *cmd)
> {
> - return !runstate_check(RUN_STATE_PRECONFIG) || cmd_can_preconfig(cmd);
> + return qdev_hotplug || cmd_can_preconfig(cmd);
> }
>
> static void help_cmd_dump_one(Monitor *mon,
> @@ -658,8 +659,8 @@ static const HMPCommand *monitor_parse_command(MonitorHMP *hmp_mon,
> return NULL;
> }
> if (!cmd_available(cmd)) {
> - monitor_printf(mon, "Command '%.*s' not available with -preconfig "
> - "until after exit_preconfig.\n",
> + monitor_printf(mon, "Command '%.*s' not available "
> + "until machine initialization has completed.\n",
> (int)(p - cmdp_start), cmdp_start);
> return NULL;
> }
> diff --git a/monitor/qmp-cmds.c b/monitor/qmp-cmds.c
> index 6299c0c8c7..501a3024c7 100644
> --- a/monitor/qmp-cmds.c
> +++ b/monitor/qmp-cmds.c
> @@ -104,9 +104,8 @@ void qmp_system_powerdown(Error **errp)
>
> void qmp_x_exit_preconfig(Error **errp)
> {
> - if (!runstate_check(RUN_STATE_PRECONFIG)) {
> - error_setg(errp, "The command is permitted only in '%s' state",
> - RunState_str(RUN_STATE_PRECONFIG));
> + if (qdev_hotplug) {
> + error_setg(errp, "The command is permitted only before machine initialization");
> return;
> }
> qemu_exit_preconfig_request();
> diff --git a/qapi/qmp-dispatch.c b/qapi/qmp-dispatch.c
> index 9a2d7dd29a..0a2b20a4e4 100644
> --- a/qapi/qmp-dispatch.c
> +++ b/qapi/qmp-dispatch.c
> @@ -167,10 +167,7 @@ QDict *qmp_dispatch(const QmpCommandList *cmds, QObject *request,
> goto out;
> }
>
> - if (runstate_check(RUN_STATE_PRECONFIG) &&
> - !(cmd->options & QCO_ALLOW_PRECONFIG)) {
> - error_setg(&err, "The command '%s' isn't permitted in '%s' state",
> - cmd->name, RunState_str(RUN_STATE_PRECONFIG));
> + if (!qmp_command_available(cmd, &err)) {
> goto out;
> }
>
> diff --git a/qapi/run-state.json b/qapi/run-state.json
> index 964c8ef391..38194b0e44 100644
> --- a/qapi/run-state.json
> +++ b/qapi/run-state.json
> @@ -50,15 +50,12 @@
> # @colo: guest is paused to save/restore VM state under colo checkpoint,
> # VM can not get into this state unless colo capability is enabled
> # for migration. (since 2.8)
> -# @preconfig: QEMU is paused before board specific init callback is executed.
> -# The state is reachable only if the --preconfig CLI option is used.
> -# (Since 3.0)
> ##
> { 'enum': 'RunState',
> 'data': [ 'debug', 'inmigrate', 'internal-error', 'io-error', 'paused',
> 'postmigrate', 'prelaunch', 'finish-migrate', 'restore-vm',
> 'running', 'save-vm', 'shutdown', 'suspended', 'watchdog',
> - 'guest-panicked', 'colo', 'preconfig' ] }
> + 'guest-panicked', 'colo' ] }
>
> ##
> # @ShutdownCause:
> diff --git a/softmmu/qdev-monitor.c b/softmmu/qdev-monitor.c
> index d060e765da..e967d13bd0 100644
> --- a/softmmu/qdev-monitor.c
> +++ b/softmmu/qdev-monitor.c
> @@ -25,6 +25,7 @@
> #include "sysemu/arch_init.h"
> #include "qapi/error.h"
> #include "qapi/qapi-commands-qdev.h"
> +#include "qapi/qmp/dispatch.h"
> #include "qapi/qmp/qdict.h"
> #include "qapi/qmp/qerror.h"
> #include "qemu/config-file.h"
> @@ -997,3 +998,14 @@ int qemu_global_option(const char *str)
>
> return 0;
> }
> +
> +bool qmp_command_available(const QmpCommand *cmd, Error **errp)
> +{
> + if (!qdev_hotplug &&
> + !(cmd->options & QCO_ALLOW_PRECONFIG)) {
> + error_setg(errp, "The command '%s' is permitted only after machine initialization has completed",
> + cmd->name);
> + return false;
> + }
> + return true;
> +}
> diff --git a/softmmu/vl.c b/softmmu/vl.c
> index 7146fbe219..ab2210bc79 100644
> --- a/softmmu/vl.c
> +++ b/softmmu/vl.c
> @@ -557,7 +557,7 @@ static int default_driver_check(void *opaque, QemuOpts *opts, Error **errp)
> /***********************************************************/
> /* QEMU state */
>
> -static RunState current_run_state = RUN_STATE_PRECONFIG;
> +static RunState current_run_state = RUN_STATE_PRELAUNCH;
>
> /* We use RUN_STATE__MAX but any invalid value will do */
> static RunState vmstop_requested = RUN_STATE__MAX;
> @@ -569,13 +569,7 @@ typedef struct {
> } RunStateTransition;
>
> static const RunStateTransition runstate_transitions_def[] = {
> - /* from -> to */
> - { RUN_STATE_PRECONFIG, RUN_STATE_PRELAUNCH },
> - /* Early switch to inmigrate state to allow -incoming CLI option work
> - * as it used to. TODO: delay actual switching to inmigrate state to
> - * the point after machine is built and remove this hack.
> - */
> - { RUN_STATE_PRECONFIG, RUN_STATE_INMIGRATE },
> + { RUN_STATE_PRELAUNCH, RUN_STATE_INMIGRATE },
>
> { RUN_STATE_DEBUG, RUN_STATE_RUNNING },
> { RUN_STATE_DEBUG, RUN_STATE_FINISH_MIGRATE },
> @@ -1471,9 +1465,6 @@ static bool main_loop_should_exit(void)
> ShutdownCause request;
>
> if (preconfig_exit_requested) {
> - if (runstate_check(RUN_STATE_PRECONFIG)) {
> - runstate_set(RUN_STATE_PRELAUNCH);
> - }
> preconfig_exit_requested = false;
> return true;
> }
> diff --git a/stubs/meson.build b/stubs/meson.build
> index 82b7ba60ab..cc56c83063 100644
> --- a/stubs/meson.build
> +++ b/stubs/meson.build
> @@ -29,6 +29,7 @@ stub_ss.add(files('pci-bus.c'))
> stub_ss.add(files('pci-host-piix.c'))
> stub_ss.add(files('qemu-timer-notify-cb.c'))
> stub_ss.add(files('qmp_memory_device.c'))
> +stub_ss.add(files('qmp-command-available.c'))
> stub_ss.add(files('qtest.c'))
> stub_ss.add(files('ram-block.c'))
> stub_ss.add(files('ramfb.c'))
> diff --git a/stubs/qmp-command-available.c b/stubs/qmp-command-available.c
> new file mode 100644
> index 0000000000..46540af7bf
> --- /dev/null
> +++ b/stubs/qmp-command-available.c
> @@ -0,0 +1,7 @@
> +#include "qemu/osdep.h"
> +#include "qapi/qmp/dispatch.h"
> +
> +bool qmp_command_available(const QmpCommand *cmd, Error **errp)
> +{
> + return true;
> +}
> diff --git a/tests/qtest/qmp-test.c b/tests/qtest/qmp-test.c
> index eb1cd8abb8..11614bf63f 100644
> --- a/tests/qtest/qmp-test.c
> +++ b/tests/qtest/qmp-test.c
> @@ -295,7 +295,7 @@ static void test_qmp_preconfig(void)
> rsp = qtest_qmp(qs, "{ 'execute': 'query-status' }");
> ret = qdict_get_qdict(rsp, "return");
> g_assert(ret);
> - g_assert_cmpstr(qdict_get_try_str(ret, "status"), ==, "preconfig");
> + g_assert_cmpstr(qdict_get_try_str(ret, "status"), ==, "prelaunch");
> qobject_unref(rsp);
>
> /* exit preconfig state */
next prev parent reply other threads:[~2020-12-07 13:58 UTC|newest]
Thread overview: 50+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-12-02 8:18 [PATCH 00/15] Finish cleaning up qemu_init Paolo Bonzini
2020-12-02 8:18 ` [PATCH 01/15] remove preconfig state Paolo Bonzini
2020-12-07 13:57 ` Igor Mammedov [this message]
2020-12-07 14:11 ` Paolo Bonzini
2020-12-07 15:14 ` Igor Mammedov
2020-12-02 8:18 ` [PATCH 02/15] vl: remove separate preconfig main_loop Paolo Bonzini
2020-12-07 14:02 ` Igor Mammedov
2020-12-02 8:18 ` [PATCH 03/15] vl: allow -incoming defer with -preconfig Paolo Bonzini
2020-12-02 8:18 ` [PATCH 04/15] vl: extract softmmu/runstate.c Paolo Bonzini
2020-12-02 8:18 ` [PATCH 05/15] vl: extract softmmu/globals.c Paolo Bonzini
2020-12-02 8:18 ` [PATCH 06/15] vl: move all generic initialization out of vl.c Paolo Bonzini
2020-12-07 14:19 ` Igor Mammedov
2020-12-02 8:18 ` [PATCH 07/15] chardev: do not use machine_init_done Paolo Bonzini
2020-12-07 15:15 ` Igor Mammedov
2020-12-02 8:18 ` [PATCH 08/15] machine: introduce MachineInitPhase Paolo Bonzini
2020-12-07 15:28 ` Igor Mammedov
2020-12-02 8:18 ` [PATCH 09/15] machine: record whether nvdimm= was set Paolo Bonzini
2020-12-07 15:40 ` Igor Mammedov
2020-12-02 8:18 ` [PATCH 10/15] vl: make qemu_get_machine_opts static Paolo Bonzini
2020-12-07 16:07 ` Igor Mammedov
2020-12-07 16:38 ` Paolo Bonzini
2020-12-08 2:32 ` Daniel Henrique Barboza
2020-12-08 10:55 ` Igor Mammedov
2020-12-08 11:05 ` [PATCH] ppc/spapr: cleanup -machine pseries,nvdimm=X handling Igor Mammedov
2020-12-08 16:46 ` [PATCH v2] " Igor Mammedov
2020-12-08 17:24 ` Daniel Henrique Barboza
2020-12-08 18:35 ` Igor Mammedov
2020-12-08 2:16 ` [PATCH 10/15] vl: make qemu_get_machine_opts static Daniel Henrique Barboza
2020-12-08 8:13 ` Paolo Bonzini
2020-12-02 8:18 ` [PATCH 11/15] qtest: add a QOM object for qtest Paolo Bonzini
2020-12-07 16:24 ` Igor Mammedov
2020-12-07 16:43 ` Paolo Bonzini
2020-12-07 16:57 ` Igor Mammedov
2020-12-07 17:22 ` Paolo Bonzini
2020-12-08 11:11 ` Igor Mammedov
2020-12-02 8:18 ` [PATCH 12/15] plugin: propagate errors Paolo Bonzini
2020-12-02 11:33 ` Alex Bennée
2020-12-07 16:53 ` Igor Mammedov
2020-12-02 8:18 ` [PATCH 13/15] memory: allow creating MemoryRegions before accelerators Paolo Bonzini
2020-12-07 16:38 ` Igor Mammedov
2020-12-07 16:40 ` Paolo Bonzini
2020-12-07 17:06 ` Igor Mammedov
2020-12-02 8:18 ` [PATCH 14/15] null-machine: do not create a default memdev Paolo Bonzini
2020-12-07 16:43 ` Igor Mammedov
2020-12-11 23:24 ` Paolo Bonzini
2020-12-14 11:53 ` Igor Mammedov
2020-12-14 13:24 ` Paolo Bonzini
2020-12-02 8:18 ` [PATCH 15/15] monitor: allow quitting while in preconfig state Paolo Bonzini
2020-12-07 16:45 ` Igor Mammedov
2020-12-07 14:12 ` [PATCH 00/15] Finish cleaning up qemu_init no-reply
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201207145705.0d5e20ea@redhat.com \
--to=imammedo@redhat.com \
--cc=pbonzini@redhat.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).