From: "Michael S. Tsirkin" <mst@redhat.com>
To: qemu-devel@nongnu.org
Cc: "Peter Maydell" <peter.maydell@linaro.org>,
"Dr . David Alan Gilbert" <dgilbert@redhat.com>,
"Raphael Norwitz" <raphael.norwitz@nutanix.com>,
"Stefan Hajnoczi" <stefanha@redhat.com>,
"Marc-André Lureau" <marcandre.lureau@redhat.com>,
"Philippe Mathieu-Daudé" <philmd@redhat.com>
Subject: [PULL v2 44/65] libvhost-user: replace qemu/bswap.h with glibc endian.h
Date: Wed, 9 Dec 2020 13:09:52 -0500 [thread overview]
Message-ID: <20201209180546.721296-45-mst@redhat.com> (raw)
In-Reply-To: <20201209180546.721296-1-mst@redhat.com>
From: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20201125100640.366523-2-marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
---
contrib/libvhost-user/libvhost-user.c | 77 ++++++++++++++-------------
1 file changed, 40 insertions(+), 37 deletions(-)
diff --git a/contrib/libvhost-user/libvhost-user.c b/contrib/libvhost-user/libvhost-user.c
index 5c73ffdd6b..1c1cfbf1e7 100644
--- a/contrib/libvhost-user/libvhost-user.c
+++ b/contrib/libvhost-user/libvhost-user.c
@@ -26,6 +26,7 @@
#include <sys/socket.h>
#include <sys/eventfd.h>
#include <sys/mman.h>
+#include <endian.h>
#include "qemu/compiler.h"
#if defined(__linux__)
@@ -42,7 +43,6 @@
#include "qemu/atomic.h"
#include "qemu/osdep.h"
-#include "qemu/bswap.h"
#include "qemu/memfd.h"
#include "libvhost-user.h"
@@ -1081,7 +1081,7 @@ vu_set_vring_addr_exec(VuDev *dev, VhostUserMsg *vmsg)
return false;
}
- vq->used_idx = lduw_le_p(&vq->vring.used->idx);
+ vq->used_idx = le16toh(vq->vring.used->idx);
if (vq->last_avail_idx != vq->used_idx) {
bool resume = dev->iface->queue_is_processed_in_order &&
@@ -1198,7 +1198,7 @@ vu_check_queue_inflights(VuDev *dev, VuVirtq *vq)
return 0;
}
- vq->used_idx = lduw_le_p(&vq->vring.used->idx);
+ vq->used_idx = le16toh(vq->vring.used->idx);
vq->resubmit_num = 0;
vq->resubmit_list = NULL;
vq->counter = 0;
@@ -2031,13 +2031,13 @@ vu_queue_started(const VuDev *dev, const VuVirtq *vq)
static inline uint16_t
vring_avail_flags(VuVirtq *vq)
{
- return lduw_le_p(&vq->vring.avail->flags);
+ return le16toh(vq->vring.avail->flags);
}
static inline uint16_t
vring_avail_idx(VuVirtq *vq)
{
- vq->shadow_avail_idx = lduw_le_p(&vq->vring.avail->idx);
+ vq->shadow_avail_idx = le16toh(vq->vring.avail->idx);
return vq->shadow_avail_idx;
}
@@ -2045,7 +2045,7 @@ vring_avail_idx(VuVirtq *vq)
static inline uint16_t
vring_avail_ring(VuVirtq *vq, int i)
{
- return lduw_le_p(&vq->vring.avail->ring[i]);
+ return le16toh(vq->vring.avail->ring[i]);
}
static inline uint16_t
@@ -2133,12 +2133,12 @@ virtqueue_read_next_desc(VuDev *dev, struct vring_desc *desc,
int i, unsigned int max, unsigned int *next)
{
/* If this descriptor says it doesn't chain, we're done. */
- if (!(lduw_le_p(&desc[i].flags) & VRING_DESC_F_NEXT)) {
+ if (!(le16toh(desc[i].flags) & VRING_DESC_F_NEXT)) {
return VIRTQUEUE_READ_DESC_DONE;
}
/* Check they're not leading us off end of descriptors. */
- *next = lduw_le_p(&desc[i].next);
+ *next = le16toh(desc[i].next);
/* Make sure compiler knows to grab that: we don't want it changing! */
smp_wmb();
@@ -2181,8 +2181,8 @@ vu_queue_get_avail_bytes(VuDev *dev, VuVirtq *vq, unsigned int *in_bytes,
}
desc = vq->vring.desc;
- if (lduw_le_p(&desc[i].flags) & VRING_DESC_F_INDIRECT) {
- if (ldl_le_p(&desc[i].len) % sizeof(struct vring_desc)) {
+ if (le16toh(desc[i].flags) & VRING_DESC_F_INDIRECT) {
+ if (le32toh(desc[i].len) % sizeof(struct vring_desc)) {
vu_panic(dev, "Invalid size for indirect buffer table");
goto err;
}
@@ -2195,8 +2195,8 @@ vu_queue_get_avail_bytes(VuDev *dev, VuVirtq *vq, unsigned int *in_bytes,
/* loop over the indirect descriptor table */
indirect = 1;
- desc_addr = ldq_le_p(&desc[i].addr);
- desc_len = ldl_le_p(&desc[i].len);
+ desc_addr = le64toh(desc[i].addr);
+ desc_len = le32toh(desc[i].len);
max = desc_len / sizeof(struct vring_desc);
read_len = desc_len;
desc = vu_gpa_to_va(dev, &read_len, desc_addr);
@@ -2223,10 +2223,10 @@ vu_queue_get_avail_bytes(VuDev *dev, VuVirtq *vq, unsigned int *in_bytes,
goto err;
}
- if (lduw_le_p(&desc[i].flags) & VRING_DESC_F_WRITE) {
- in_total += ldl_le_p(&desc[i].len);
+ if (le16toh(desc[i].flags) & VRING_DESC_F_WRITE) {
+ in_total += le32toh(desc[i].len);
} else {
- out_total += ldl_le_p(&desc[i].len);
+ out_total += le32toh(desc[i].len);
}
if (in_total >= max_in_bytes && out_total >= max_out_bytes) {
goto done;
@@ -2377,7 +2377,7 @@ vring_used_flags_set_bit(VuVirtq *vq, int mask)
flags = (uint16_t *)((char*)vq->vring.used +
offsetof(struct vring_used, flags));
- stw_le_p(flags, lduw_le_p(flags) | mask);
+ *flags = htole16(le16toh(*flags) | mask);
}
static inline void
@@ -2387,17 +2387,20 @@ vring_used_flags_unset_bit(VuVirtq *vq, int mask)
flags = (uint16_t *)((char*)vq->vring.used +
offsetof(struct vring_used, flags));
- stw_le_p(flags, lduw_le_p(flags) & ~mask);
+ *flags = htole16(le16toh(*flags) & ~mask);
}
static inline void
vring_set_avail_event(VuVirtq *vq, uint16_t val)
{
+ uint16_t *avail;
+
if (!vq->notification) {
return;
}
- stw_le_p(&vq->vring.used->ring[vq->vring.num], val);
+ avail = (uint16_t *)&vq->vring.used->ring[vq->vring.num];
+ *avail = htole16(val);
}
void
@@ -2487,15 +2490,15 @@ vu_queue_map_desc(VuDev *dev, VuVirtq *vq, unsigned int idx, size_t sz)
struct vring_desc desc_buf[VIRTQUEUE_MAX_SIZE];
int rc;
- if (lduw_le_p(&desc[i].flags) & VRING_DESC_F_INDIRECT) {
- if (ldl_le_p(&desc[i].len) % sizeof(struct vring_desc)) {
+ if (le16toh(desc[i].flags) & VRING_DESC_F_INDIRECT) {
+ if (le32toh(desc[i].len) % sizeof(struct vring_desc)) {
vu_panic(dev, "Invalid size for indirect buffer table");
return NULL;
}
/* loop over the indirect descriptor table */
- desc_addr = ldq_le_p(&desc[i].addr);
- desc_len = ldl_le_p(&desc[i].len);
+ desc_addr = le64toh(desc[i].addr);
+ desc_len = le32toh(desc[i].len);
max = desc_len / sizeof(struct vring_desc);
read_len = desc_len;
desc = vu_gpa_to_va(dev, &read_len, desc_addr);
@@ -2517,11 +2520,11 @@ vu_queue_map_desc(VuDev *dev, VuVirtq *vq, unsigned int idx, size_t sz)
/* Collect all the descriptors */
do {
- if (lduw_le_p(&desc[i].flags) & VRING_DESC_F_WRITE) {
+ if (le16toh(desc[i].flags) & VRING_DESC_F_WRITE) {
if (!virtqueue_map_desc(dev, &in_num, iov + out_num,
VIRTQUEUE_MAX_SIZE - out_num, true,
- ldq_le_p(&desc[i].addr),
- ldl_le_p(&desc[i].len))) {
+ le64toh(desc[i].addr),
+ le32toh(desc[i].len))) {
return NULL;
}
} else {
@@ -2531,8 +2534,8 @@ vu_queue_map_desc(VuDev *dev, VuVirtq *vq, unsigned int idx, size_t sz)
}
if (!virtqueue_map_desc(dev, &out_num, iov,
VIRTQUEUE_MAX_SIZE, false,
- ldq_le_p(&desc[i].addr),
- ldl_le_p(&desc[i].len))) {
+ le64toh(desc[i].addr),
+ le32toh(desc[i].len))) {
return NULL;
}
}
@@ -2731,15 +2734,15 @@ vu_log_queue_fill(VuDev *dev, VuVirtq *vq,
max = vq->vring.num;
i = elem->index;
- if (lduw_le_p(&desc[i].flags) & VRING_DESC_F_INDIRECT) {
- if (ldl_le_p(&desc[i].len) % sizeof(struct vring_desc)) {
+ if (le16toh(desc[i].flags) & VRING_DESC_F_INDIRECT) {
+ if (le32toh(desc[i].len) % sizeof(struct vring_desc)) {
vu_panic(dev, "Invalid size for indirect buffer table");
return;
}
/* loop over the indirect descriptor table */
- desc_addr = ldq_le_p(&desc[i].addr);
- desc_len = ldl_le_p(&desc[i].len);
+ desc_addr = le64toh(desc[i].addr);
+ desc_len = le32toh(desc[i].len);
max = desc_len / sizeof(struct vring_desc);
read_len = desc_len;
desc = vu_gpa_to_va(dev, &read_len, desc_addr);
@@ -2765,9 +2768,9 @@ vu_log_queue_fill(VuDev *dev, VuVirtq *vq,
return;
}
- if (lduw_le_p(&desc[i].flags) & VRING_DESC_F_WRITE) {
- min = MIN(ldl_le_p(&desc[i].len), len);
- vu_log_write(dev, ldq_le_p(&desc[i].addr), min);
+ if (le16toh(desc[i].flags) & VRING_DESC_F_WRITE) {
+ min = MIN(le32toh(desc[i].len), len);
+ vu_log_write(dev, le64toh(desc[i].addr), min);
len -= min;
}
@@ -2792,15 +2795,15 @@ vu_queue_fill(VuDev *dev, VuVirtq *vq,
idx = (idx + vq->used_idx) % vq->vring.num;
- stl_le_p(&uelem.id, elem->index);
- stl_le_p(&uelem.len, len);
+ uelem.id = htole32(elem->index);
+ uelem.len = htole32(len);
vring_used_write(dev, vq, &uelem, idx);
}
static inline
void vring_used_idx_set(VuDev *dev, VuVirtq *vq, uint16_t val)
{
- stw_le_p(&vq->vring.used->idx, val);
+ vq->vring.used->idx = htole16(val);
vu_log_write(dev,
vq->vring.log_guest_addr + offsetof(struct vring_used, idx),
sizeof(vq->vring.used->idx));
--
MST
next prev parent reply other threads:[~2020-12-09 19:00 UTC|newest]
Thread overview: 70+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-12-09 18:06 [PULL v2 00/65] pc,pci,virtio: fixes, cleanups Michael S. Tsirkin
2020-12-09 18:06 ` [PULL v2 01/65] vhost-user-scsi: Fix memleaks in vus_proc_req() Michael S. Tsirkin
2020-12-09 18:06 ` [PULL v2 02/65] memory: Rename memory_region_notify_one to memory_region_notify_iommu_one Michael S. Tsirkin
2020-12-09 18:06 ` [PULL v2 03/65] memory: Add IOMMUTLBEvent Michael S. Tsirkin
2020-12-09 18:06 ` [PULL v2 04/65] memory: Add IOMMU_NOTIFIER_DEVIOTLB_UNMAP IOMMUTLBNotificationType Michael S. Tsirkin
2020-12-09 18:06 ` [PULL v2 05/65] intel_iommu: Skip page walking on device iotlb invalidations Michael S. Tsirkin
2020-12-09 18:07 ` [PULL v2 06/65] memory: Skip bad range assertion if notifier is DEVIOTLB_UNMAP type Michael S. Tsirkin
2020-12-09 18:07 ` [PULL v2 07/65] virtio: reset device on bad guest index in virtio_load() Michael S. Tsirkin
2020-12-09 18:07 ` [PULL v2 08/65] acpi/gpex: Extract two APIs from acpi_dsdt_add_pci Michael S. Tsirkin
2020-12-09 18:07 ` [PULL v2 09/65] fw_cfg: Refactor extra pci roots addition Michael S. Tsirkin
2020-12-09 18:07 ` [PULL v2 10/65] hw/arm/virt: Write extra pci roots into fw_cfg Michael S. Tsirkin
2020-12-09 18:07 ` [PULL v2 11/65] acpi: Extract crs build form acpi_build.c Michael S. Tsirkin
2020-12-09 18:07 ` [PULL v2 12/65] acpi/gpex: Build tables for pxb Michael S. Tsirkin
2020-12-09 18:07 ` [PULL v2 13/65] acpi: Align the size to 128k Michael S. Tsirkin
2020-12-09 18:07 ` [PULL v2 14/65] unit-test: The files changed Michael S. Tsirkin
2020-12-09 18:07 ` [PULL v2 15/65] unit-test: Add testcase for pxb Michael S. Tsirkin
2020-12-09 18:07 ` [PULL v2 16/65] unit-test: Add the binary file and clear diff.h Michael S. Tsirkin
2020-12-09 18:07 ` [PULL v2 17/65] failover: fix indentantion Michael S. Tsirkin
2020-12-09 18:08 ` [PULL v2 18/65] failover: Use always atomics for primary_should_be_hidden Michael S. Tsirkin
2020-12-09 18:08 ` [PULL v2 19/65] failover: primary bus is only used once, and where it is set Michael S. Tsirkin
2020-12-09 18:08 ` [PULL v2 20/65] failover: Remove unused parameter Michael S. Tsirkin
2020-12-09 18:08 ` [PULL v2 21/65] failover: Remove external partially_hotplugged property Michael S. Tsirkin
2020-12-09 18:08 ` [PULL v2 22/65] failover: qdev_device_add() returns err or dev set Michael S. Tsirkin
2020-12-09 18:08 ` [PULL v2 23/65] failover: Rename bool to failover_primary_hidden Michael S. Tsirkin
2020-12-09 18:08 ` [PULL v2 24/65] failover: g_strcmp0() knows how to handle NULL Michael S. Tsirkin
2020-12-09 18:08 ` [PULL v2 25/65] failover: Remove primary_device_opts Michael S. Tsirkin
2020-12-09 18:08 ` [PULL v2 26/65] failover: remove standby_id variable Michael S. Tsirkin
2020-12-09 18:08 ` [PULL v2 27/65] failover: Remove primary_device_dict Michael S. Tsirkin
2020-12-09 18:08 ` [PULL v2 28/65] failover: Remove memory leak Michael S. Tsirkin
2020-12-09 18:08 ` [PULL v2 29/65] failover: simplify virtio_net_find_primary() Michael S. Tsirkin
2020-12-09 18:09 ` [PULL v2 30/65] failover: should_be_hidden() should take a bool Michael S. Tsirkin
2020-12-09 18:09 ` [PULL v2 31/65] failover: Rename function to hide_device() Michael S. Tsirkin
2020-12-09 18:09 ` [PULL v2 32/65] failover: virtio_net_connect_failover_devices() does nothing Michael S. Tsirkin
2020-12-09 18:09 ` [PULL v2 33/65] failover: Rename to failover_find_primary_device() Michael S. Tsirkin
2020-12-09 18:09 ` [PULL v2 34/65] failover: simplify qdev_device_add() failover case Michael S. Tsirkin
2020-12-09 18:09 ` [PULL v2 35/65] failover: simplify qdev_device_add() Michael S. Tsirkin
2020-12-09 18:09 ` [PULL v2 36/65] failover: make sure that id always exist Michael S. Tsirkin
2020-12-09 18:09 ` [PULL v2 37/65] failover: remove failover_find_primary_device() error parameter Michael S. Tsirkin
2020-12-09 18:09 ` [PULL v2 38/65] failover: split failover_find_primary_device_id() Michael S. Tsirkin
2020-12-09 18:09 ` [PULL v2 39/65] failover: We don't need to cache primary_device_id anymore Michael S. Tsirkin
2020-12-09 18:09 ` [PULL v2 40/65] failover: Caller of this two functions already have primary_dev Michael S. Tsirkin
2020-12-09 18:09 ` [PULL v2 41/65] failover: simplify failover_unplug_primary Michael S. Tsirkin
2020-12-09 18:09 ` [PULL v2 42/65] failover: Remove primary_dev member Michael S. Tsirkin
2020-12-09 18:09 ` [PULL v2 43/65] hw: add compat machines for 6.0 Michael S. Tsirkin
2020-12-09 18:09 ` Michael S. Tsirkin [this message]
2020-12-09 18:10 ` [PULL v2 45/65] libvhost-user: replace qemu/memfd.h usage Michael S. Tsirkin
2020-12-09 18:10 ` [PULL v2 46/65] libvhost-user: remove qemu/compiler.h usage Michael S. Tsirkin
2020-12-09 18:10 ` [PULL v2 47/65] libvhost-user: drop qemu/osdep.h dependency Michael S. Tsirkin
2020-12-09 18:10 ` [PULL v2 48/65] libvhost-user: make it a meson subproject Michael S. Tsirkin
2020-12-10 16:09 ` Peter Maydell
2020-12-10 16:17 ` Paolo Bonzini
2020-12-10 16:26 ` Peter Maydell
2020-12-09 18:10 ` [PULL v2 49/65] libvhost-user: add a simple link test without glib Michael S. Tsirkin
2020-12-09 18:10 ` [PULL v2 50/65] .gitlab-ci: add build-libvhost-user Michael S. Tsirkin
2020-12-09 18:10 ` [PULL v2 51/65] contrib/vhost-user-blk: avoid g_return_val_if() input validation Michael S. Tsirkin
2020-12-09 18:10 ` [PULL v2 52/65] contrib/vhost-user-gpu: " Michael S. Tsirkin
2020-12-09 18:10 ` [PULL v2 53/65] contrib/vhost-user-input: " Michael S. Tsirkin
2020-12-09 18:10 ` [PULL v2 54/65] block/export: " Michael S. Tsirkin
2020-12-09 18:10 ` [PULL v2 55/65] hw/i386/pc: add max combined fw size as machine configuration option Michael S. Tsirkin
2020-12-09 18:10 ` [PULL v2 56/65] acpi: cpuhp: introduce 'firmware performs eject' status/control bits Michael S. Tsirkin
2020-12-09 18:11 ` [PULL v2 57/65] x86: acpi: introduce AcpiPmInfo::smi_on_cpu_unplug Michael S. Tsirkin
2020-12-09 18:11 ` [PULL v2 58/65] tests/acpi: allow expected files change Michael S. Tsirkin
2020-12-09 18:11 ` [PULL v2 59/65] x86: acpi: let the firmware handle pending "CPU remove" events in SMM Michael S. Tsirkin
2020-12-09 18:11 ` [PULL v2 60/65] tests/acpi: update expected files Michael S. Tsirkin
2020-12-09 18:11 ` [PULL v2 61/65] x86: ich9: factor out "guest_cpu_hotplug_features" Michael S. Tsirkin
2020-12-09 18:11 ` [PULL v2 62/65] x86: ich9: let firmware negotiate 'CPU hot-unplug with SMI' feature Michael S. Tsirkin
2020-12-09 18:11 ` [PULL v2 63/65] pcie_aer: Fix help message of pcie_aer_inject_error command Michael S. Tsirkin
2020-12-09 18:11 ` [PULL v2 64/65] hw/virtio-pci Added counter for pcie capabilities offsets Michael S. Tsirkin
2020-12-09 18:11 ` [PULL v2 65/65] hw/virtio-pci Added AER capability Michael S. Tsirkin
2020-12-09 21:42 ` [PULL v2 00/65] pc,pci,virtio: fixes, cleanups Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201209180546.721296-45-mst@redhat.com \
--to=mst@redhat.com \
--cc=dgilbert@redhat.com \
--cc=marcandre.lureau@redhat.com \
--cc=peter.maydell@linaro.org \
--cc=philmd@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=raphael.norwitz@nutanix.com \
--cc=stefanha@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).