qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Peter Maydell <peter.maydell@linaro.org>
To: qemu-devel@nongnu.org
Subject: [PULL 25/36] hw/intc/armv7m_nvic: Update FPDSCR masking for v8.1M
Date: Thu, 10 Dec 2020 11:47:45 +0000	[thread overview]
Message-ID: <20201210114756.16501-26-peter.maydell@linaro.org> (raw)
In-Reply-To: <20201210114756.16501-1-peter.maydell@linaro.org>

The FPDSCR register has a similar layout to the FPSCR.  In v8.1M it
gains new fields FZ16 (if half-precision floating point is supported)
and LTPSIZE (always reads as 4).  Update the reset value and the code
that handles writes to this register accordingly.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201119215617.29887-16-peter.maydell@linaro.org
---
 target/arm/cpu.h      | 5 +++++
 hw/intc/armv7m_nvic.c | 9 ++++++++-
 target/arm/cpu.c      | 3 +++
 3 files changed, 16 insertions(+), 1 deletion(-)

diff --git a/target/arm/cpu.h b/target/arm/cpu.h
index 04f6220b2f7..47cb5032ce9 100644
--- a/target/arm/cpu.h
+++ b/target/arm/cpu.h
@@ -1521,14 +1521,19 @@ void vfp_set_fpscr(CPUARMState *env, uint32_t val);
 #define FPCR_IXE    (1 << 12)   /* Inexact exception trap enable */
 #define FPCR_IDE    (1 << 15)   /* Input Denormal exception trap enable */
 #define FPCR_FZ16   (1 << 19)   /* ARMv8.2+, FP16 flush-to-zero */
+#define FPCR_RMODE_MASK (3 << 22) /* Rounding mode */
 #define FPCR_FZ     (1 << 24)   /* Flush-to-zero enable bit */
 #define FPCR_DN     (1 << 25)   /* Default NaN enable bit */
+#define FPCR_AHP    (1 << 26)   /* Alternative half-precision */
 #define FPCR_QC     (1 << 27)   /* Cumulative saturation bit */
 #define FPCR_V      (1 << 28)   /* FP overflow flag */
 #define FPCR_C      (1 << 29)   /* FP carry flag */
 #define FPCR_Z      (1 << 30)   /* FP zero flag */
 #define FPCR_N      (1 << 31)   /* FP negative flag */
 
+#define FPCR_LTPSIZE_SHIFT 16   /* LTPSIZE, M-profile only */
+#define FPCR_LTPSIZE_MASK (7 << FPCR_LTPSIZE_SHIFT)
+
 #define FPCR_NZCV_MASK (FPCR_N | FPCR_Z | FPCR_C | FPCR_V)
 #define FPCR_NZCVQC_MASK (FPCR_NZCV_MASK | FPCR_QC)
 
diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c
index 9628ce876e0..be3bc1f1f45 100644
--- a/hw/intc/armv7m_nvic.c
+++ b/hw/intc/armv7m_nvic.c
@@ -2068,7 +2068,14 @@ static void nvic_writel(NVICState *s, uint32_t offset, uint32_t value,
         break;
     case 0xf3c: /* FPDSCR */
         if (cpu_isar_feature(aa32_vfp_simd, cpu)) {
-            value &= 0x07c00000;
+            uint32_t mask = FPCR_AHP | FPCR_DN | FPCR_FZ | FPCR_RMODE_MASK;
+            if (cpu_isar_feature(any_fp16, cpu)) {
+                mask |= FPCR_FZ16;
+            }
+            value &= mask;
+            if (cpu_isar_feature(aa32_lob, cpu)) {
+                value |= 4 << FPCR_LTPSIZE_SHIFT;
+            }
             cpu->env.v7m.fpdscr[attrs.secure] = value;
         }
         break;
diff --git a/target/arm/cpu.c b/target/arm/cpu.c
index 40f3f798b2b..d6188f6566a 100644
--- a/target/arm/cpu.c
+++ b/target/arm/cpu.c
@@ -262,6 +262,9 @@ static void arm_cpu_reset(DeviceState *dev)
              * always reset to 4.
              */
             env->v7m.ltpsize = 4;
+            /* The LTPSIZE field in FPDSCR is constant and reads as 4. */
+            env->v7m.fpdscr[M_REG_NS] = 4 << FPCR_LTPSIZE_SHIFT;
+            env->v7m.fpdscr[M_REG_S] = 4 << FPCR_LTPSIZE_SHIFT;
         }
 
         if (arm_feature(env, ARM_FEATURE_M_SECURITY)) {
-- 
2.20.1



  parent reply	other threads:[~2020-12-10 12:09 UTC|newest]

Thread overview: 38+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-12-10 11:47 [PULL 00/36] target-arm queue Peter Maydell
2020-12-10 11:47 ` [PULL 01/36] hw/arm/smmuv3: Fix up L1STD_SPAN decoding Peter Maydell
2020-12-10 11:47 ` [PULL 02/36] hw/net/can: Introduce Xilinx ZynqMP CAN controller Peter Maydell
2020-12-10 11:47 ` [PULL 03/36] xlnx-zynqmp: Connect Xilinx ZynqMP CAN controllers Peter Maydell
2020-12-10 11:47 ` [PULL 04/36] tests/qtest: Introduce tests for Xilinx ZynqMP CAN controller Peter Maydell
2020-12-10 11:47 ` [PULL 05/36] MAINTAINERS: Add maintainer entry " Peter Maydell
2020-12-10 11:47 ` [PULL 06/36] sbsa-ref: allow to use Cortex-A53/57/72 cpus Peter Maydell
2020-12-10 11:47 ` [PULL 07/36] tests/qtest/npcm7xx_rng-test: dump random data on failure Peter Maydell
2020-12-10 11:47 ` [PULL 08/36] i.MX25: Fix bad printf format specifiers Peter Maydell
2020-12-10 11:47 ` [PULL 09/36] i.MX31: " Peter Maydell
2020-12-10 11:47 ` [PULL 10/36] i.MX6: " Peter Maydell
2020-12-10 11:47 ` [PULL 11/36] i.MX6ul: " Peter Maydell
2020-12-10 11:47 ` [PULL 12/36] hw/intc/armv7m_nvic: Make all of system PPB range be RAZWI/BusFault Peter Maydell
2020-12-10 11:47 ` [PULL 13/36] target/arm: Implement v8.1M PXN extension Peter Maydell
2020-12-10 11:47 ` [PULL 14/36] target/arm: Don't clobber ID_PFR1.Security on M-profile cores Peter Maydell
2020-12-10 11:47 ` [PULL 15/36] target/arm: Implement VSCCLRM insn Peter Maydell
2020-12-10 11:47 ` [PULL 16/36] target/arm: Implement CLRM instruction Peter Maydell
2020-12-10 11:47 ` [PULL 17/36] target/arm: Enforce M-profile VMRS/VMSR register restrictions Peter Maydell
2020-12-10 11:47 ` [PULL 18/36] target/arm: Refactor M-profile VMSR/VMRS handling Peter Maydell
2020-12-10 11:47 ` [PULL 19/36] target/arm: Move general-use constant expanders up in translate.c Peter Maydell
2020-12-10 11:47 ` [PULL 20/36] target/arm: Implement VLDR/VSTR system register Peter Maydell
2020-12-10 11:47 ` [PULL 21/36] target/arm: Implement M-profile FPSCR_nzcvqc Peter Maydell
2020-12-10 11:47 ` [PULL 22/36] target/arm: Use new FPCR_NZCV_MASK constant Peter Maydell
2020-12-10 11:47 ` [PULL 23/36] target/arm: Factor out preserve-fp-state from full_vfp_access_check() Peter Maydell
2020-12-10 11:47 ` [PULL 24/36] target/arm: Implement FPCXT_S fp system register Peter Maydell
2020-12-10 11:47 ` Peter Maydell [this message]
2020-12-10 11:47 ` [PULL 26/36] target/arm: For v8.1M, always clear R0-R3, R12, APSR, EPSR on exception entry Peter Maydell
2020-12-10 11:47 ` [PULL 27/36] target/arm: In v8.1M, don't set HFSR.FORCED on vector table fetch failures Peter Maydell
2020-12-10 11:47 ` [PULL 28/36] target/arm: Implement v8.1M REVIDR register Peter Maydell
2020-12-10 11:47 ` [PULL 29/36] target/arm: Implement new v8.1M NOCP check for exception return Peter Maydell
2020-12-10 11:47 ` [PULL 30/36] target/arm: Implement new v8.1M VLLDM and VLSTM encodings Peter Maydell
2020-12-10 11:47 ` [PULL 31/36] hw/intc/armv7m_nvic: Support v8.1M CCR.TRD bit Peter Maydell
2020-12-10 11:47 ` [PULL 32/36] target/arm: Implement CCR_S.TRD behaviour for SG insns Peter Maydell
2020-12-10 11:47 ` [PULL 33/36] hw/intc/armv7m_nvic: Fix "return from inactive handler" check Peter Maydell
2020-12-10 11:47 ` [PULL 34/36] target/arm: Implement M-profile "minimal RAS implementation" Peter Maydell
2020-12-10 11:47 ` [PULL 35/36] hw/intc/armv7m_nvic: Implement read/write for RAS register block Peter Maydell
2020-12-10 11:47 ` [PULL 36/36] hw/arm/armv7m: Correct typo in QOM object name Peter Maydell
2020-12-10 12:51 ` [PULL 00/36] target-arm queue Peter Maydell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201210114756.16501-26-peter.maydell@linaro.org \
    --to=peter.maydell@linaro.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).