qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Peter Maydell <peter.maydell@linaro.org>
To: qemu-devel@nongnu.org
Subject: [PULL 31/36] hw/intc/armv7m_nvic: Support v8.1M CCR.TRD bit
Date: Thu, 10 Dec 2020 11:47:51 +0000	[thread overview]
Message-ID: <20201210114756.16501-32-peter.maydell@linaro.org> (raw)
In-Reply-To: <20201210114756.16501-1-peter.maydell@linaro.org>

v8.1M introduces a new TRD flag in the CCR register, which enables
checking for stack frame integrity signatures on SG instructions.
This bit is not banked, and is always RAZ/WI to Non-secure code.
Adjust the code for handling CCR reads and writes to handle this.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201119215617.29887-23-peter.maydell@linaro.org
---
 target/arm/cpu.h      |  2 ++
 hw/intc/armv7m_nvic.c | 26 ++++++++++++++++++--------
 2 files changed, 20 insertions(+), 8 deletions(-)

diff --git a/target/arm/cpu.h b/target/arm/cpu.h
index 47cb5032ce9..22c55c81933 100644
--- a/target/arm/cpu.h
+++ b/target/arm/cpu.h
@@ -1611,6 +1611,8 @@ FIELD(V7M_CCR, STKOFHFNMIGN, 10, 1)
 FIELD(V7M_CCR, DC, 16, 1)
 FIELD(V7M_CCR, IC, 17, 1)
 FIELD(V7M_CCR, BP, 18, 1)
+FIELD(V7M_CCR, LOB, 19, 1)
+FIELD(V7M_CCR, TRD, 20, 1)
 
 /* V7M SCR bits */
 FIELD(V7M_SCR, SLEEPONEXIT, 1, 1)
diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c
index effc4a784ca..6f94f88a795 100644
--- a/hw/intc/armv7m_nvic.c
+++ b/hw/intc/armv7m_nvic.c
@@ -1095,8 +1095,9 @@ static uint32_t nvic_readl(NVICState *s, uint32_t offset, MemTxAttrs attrs)
         }
         return cpu->env.v7m.scr[attrs.secure];
     case 0xd14: /* Configuration Control.  */
-        /* The BFHFNMIGN bit is the only non-banked bit; we
-         * keep it in the non-secure copy of the register.
+        /*
+         * Non-banked bits: BFHFNMIGN (stored in the NS copy of the register)
+         * and TRD (stored in the S copy of the register)
          */
         val = cpu->env.v7m.ccr[attrs.secure];
         val |= cpu->env.v7m.ccr[M_REG_NS] & R_V7M_CCR_BFHFNMIGN_MASK;
@@ -1639,17 +1640,25 @@ static void nvic_writel(NVICState *s, uint32_t offset, uint32_t value,
         cpu->env.v7m.scr[attrs.secure] = value;
         break;
     case 0xd14: /* Configuration Control.  */
+    {
+        uint32_t mask;
+
         if (!arm_feature(&cpu->env, ARM_FEATURE_M_MAIN)) {
             goto bad_offset;
         }
 
         /* Enforce RAZ/WI on reserved and must-RAZ/WI bits */
-        value &= (R_V7M_CCR_STKALIGN_MASK |
-                  R_V7M_CCR_BFHFNMIGN_MASK |
-                  R_V7M_CCR_DIV_0_TRP_MASK |
-                  R_V7M_CCR_UNALIGN_TRP_MASK |
-                  R_V7M_CCR_USERSETMPEND_MASK |
-                  R_V7M_CCR_NONBASETHRDENA_MASK);
+        mask = R_V7M_CCR_STKALIGN_MASK |
+            R_V7M_CCR_BFHFNMIGN_MASK |
+            R_V7M_CCR_DIV_0_TRP_MASK |
+            R_V7M_CCR_UNALIGN_TRP_MASK |
+            R_V7M_CCR_USERSETMPEND_MASK |
+            R_V7M_CCR_NONBASETHRDENA_MASK;
+        if (arm_feature(&cpu->env, ARM_FEATURE_V8_1M) && attrs.secure) {
+            /* TRD is always RAZ/WI from NS */
+            mask |= R_V7M_CCR_TRD_MASK;
+        }
+        value &= mask;
 
         if (arm_feature(&cpu->env, ARM_FEATURE_V8)) {
             /* v8M makes NONBASETHRDENA and STKALIGN be RES1 */
@@ -1666,6 +1675,7 @@ static void nvic_writel(NVICState *s, uint32_t offset, uint32_t value,
 
         cpu->env.v7m.ccr[attrs.secure] = value;
         break;
+    }
     case 0xd24: /* System Handler Control and State (SHCSR) */
         if (!arm_feature(&cpu->env, ARM_FEATURE_V7)) {
             goto bad_offset;
-- 
2.20.1



  parent reply	other threads:[~2020-12-10 12:07 UTC|newest]

Thread overview: 38+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-12-10 11:47 [PULL 00/36] target-arm queue Peter Maydell
2020-12-10 11:47 ` [PULL 01/36] hw/arm/smmuv3: Fix up L1STD_SPAN decoding Peter Maydell
2020-12-10 11:47 ` [PULL 02/36] hw/net/can: Introduce Xilinx ZynqMP CAN controller Peter Maydell
2020-12-10 11:47 ` [PULL 03/36] xlnx-zynqmp: Connect Xilinx ZynqMP CAN controllers Peter Maydell
2020-12-10 11:47 ` [PULL 04/36] tests/qtest: Introduce tests for Xilinx ZynqMP CAN controller Peter Maydell
2020-12-10 11:47 ` [PULL 05/36] MAINTAINERS: Add maintainer entry " Peter Maydell
2020-12-10 11:47 ` [PULL 06/36] sbsa-ref: allow to use Cortex-A53/57/72 cpus Peter Maydell
2020-12-10 11:47 ` [PULL 07/36] tests/qtest/npcm7xx_rng-test: dump random data on failure Peter Maydell
2020-12-10 11:47 ` [PULL 08/36] i.MX25: Fix bad printf format specifiers Peter Maydell
2020-12-10 11:47 ` [PULL 09/36] i.MX31: " Peter Maydell
2020-12-10 11:47 ` [PULL 10/36] i.MX6: " Peter Maydell
2020-12-10 11:47 ` [PULL 11/36] i.MX6ul: " Peter Maydell
2020-12-10 11:47 ` [PULL 12/36] hw/intc/armv7m_nvic: Make all of system PPB range be RAZWI/BusFault Peter Maydell
2020-12-10 11:47 ` [PULL 13/36] target/arm: Implement v8.1M PXN extension Peter Maydell
2020-12-10 11:47 ` [PULL 14/36] target/arm: Don't clobber ID_PFR1.Security on M-profile cores Peter Maydell
2020-12-10 11:47 ` [PULL 15/36] target/arm: Implement VSCCLRM insn Peter Maydell
2020-12-10 11:47 ` [PULL 16/36] target/arm: Implement CLRM instruction Peter Maydell
2020-12-10 11:47 ` [PULL 17/36] target/arm: Enforce M-profile VMRS/VMSR register restrictions Peter Maydell
2020-12-10 11:47 ` [PULL 18/36] target/arm: Refactor M-profile VMSR/VMRS handling Peter Maydell
2020-12-10 11:47 ` [PULL 19/36] target/arm: Move general-use constant expanders up in translate.c Peter Maydell
2020-12-10 11:47 ` [PULL 20/36] target/arm: Implement VLDR/VSTR system register Peter Maydell
2020-12-10 11:47 ` [PULL 21/36] target/arm: Implement M-profile FPSCR_nzcvqc Peter Maydell
2020-12-10 11:47 ` [PULL 22/36] target/arm: Use new FPCR_NZCV_MASK constant Peter Maydell
2020-12-10 11:47 ` [PULL 23/36] target/arm: Factor out preserve-fp-state from full_vfp_access_check() Peter Maydell
2020-12-10 11:47 ` [PULL 24/36] target/arm: Implement FPCXT_S fp system register Peter Maydell
2020-12-10 11:47 ` [PULL 25/36] hw/intc/armv7m_nvic: Update FPDSCR masking for v8.1M Peter Maydell
2020-12-10 11:47 ` [PULL 26/36] target/arm: For v8.1M, always clear R0-R3, R12, APSR, EPSR on exception entry Peter Maydell
2020-12-10 11:47 ` [PULL 27/36] target/arm: In v8.1M, don't set HFSR.FORCED on vector table fetch failures Peter Maydell
2020-12-10 11:47 ` [PULL 28/36] target/arm: Implement v8.1M REVIDR register Peter Maydell
2020-12-10 11:47 ` [PULL 29/36] target/arm: Implement new v8.1M NOCP check for exception return Peter Maydell
2020-12-10 11:47 ` [PULL 30/36] target/arm: Implement new v8.1M VLLDM and VLSTM encodings Peter Maydell
2020-12-10 11:47 ` Peter Maydell [this message]
2020-12-10 11:47 ` [PULL 32/36] target/arm: Implement CCR_S.TRD behaviour for SG insns Peter Maydell
2020-12-10 11:47 ` [PULL 33/36] hw/intc/armv7m_nvic: Fix "return from inactive handler" check Peter Maydell
2020-12-10 11:47 ` [PULL 34/36] target/arm: Implement M-profile "minimal RAS implementation" Peter Maydell
2020-12-10 11:47 ` [PULL 35/36] hw/intc/armv7m_nvic: Implement read/write for RAS register block Peter Maydell
2020-12-10 11:47 ` [PULL 36/36] hw/arm/armv7m: Correct typo in QOM object name Peter Maydell
2020-12-10 12:51 ` [PULL 00/36] target-arm queue Peter Maydell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201210114756.16501-32-peter.maydell@linaro.org \
    --to=peter.maydell@linaro.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).