From: Richard Henderson <richard.henderson@linaro.org>
To: qemu-devel@nongnu.org
Subject: [PATCH v4 31/43] tcg/sparc: Support split-wx code generation
Date: Mon, 14 Dec 2020 08:03:02 -0600 [thread overview]
Message-ID: <20201214140314.18544-32-richard.henderson@linaro.org> (raw)
In-Reply-To: <20201214140314.18544-1-richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
tcg/sparc/tcg-target.h | 2 +-
tcg/sparc/tcg-target.c.inc | 24 +++++++++++++-----------
2 files changed, 14 insertions(+), 12 deletions(-)
diff --git a/tcg/sparc/tcg-target.h b/tcg/sparc/tcg-target.h
index 21e7e2f56f..54b9da9aeb 100644
--- a/tcg/sparc/tcg-target.h
+++ b/tcg/sparc/tcg-target.h
@@ -171,6 +171,6 @@ extern bool use_vis3_instructions;
void tb_target_set_jmp_target(uintptr_t, uintptr_t, uintptr_t, uintptr_t);
#define TCG_TARGET_NEED_POOL_LABELS
-#define TCG_TARGET_SUPPORT_MIRROR 0
+#define TCG_TARGET_SUPPORT_MIRROR 1
#endif
diff --git a/tcg/sparc/tcg-target.c.inc b/tcg/sparc/tcg-target.c.inc
index 8f04fdf981..182124b96c 100644
--- a/tcg/sparc/tcg-target.c.inc
+++ b/tcg/sparc/tcg-target.c.inc
@@ -291,14 +291,15 @@ static inline int check_fit_i32(int32_t val, unsigned int bits)
# define check_fit_ptr check_fit_i32
#endif
-static bool patch_reloc(tcg_insn_unit *code_ptr, int type,
+static bool patch_reloc(tcg_insn_unit *src_rw, int type,
intptr_t value, intptr_t addend)
{
- uint32_t insn = *code_ptr;
+ const tcg_insn_unit *src_rx = tcg_splitwx_to_rx(src_rw);
+ uint32_t insn = *src_rw;
intptr_t pcrel;
value += addend;
- pcrel = tcg_ptr_byte_diff((tcg_insn_unit *)value, code_ptr);
+ pcrel = tcg_ptr_byte_diff((tcg_insn_unit *)value, src_rx);
switch (type) {
case R_SPARC_WDISP16:
@@ -315,7 +316,7 @@ static bool patch_reloc(tcg_insn_unit *code_ptr, int type,
g_assert_not_reached();
}
- *code_ptr = insn;
+ *src_rw = insn;
return true;
}
@@ -868,8 +869,8 @@ static void tcg_out_mb(TCGContext *s, TCGArg a0)
}
#ifdef CONFIG_SOFTMMU
-static tcg_insn_unit *qemu_ld_trampoline[16];
-static tcg_insn_unit *qemu_st_trampoline[16];
+static const tcg_insn_unit *qemu_ld_trampoline[16];
+static const tcg_insn_unit *qemu_st_trampoline[16];
static void emit_extend(TCGContext *s, TCGReg r, int op)
{
@@ -930,7 +931,7 @@ static void build_trampolines(TCGContext *s)
while ((uintptr_t)s->code_ptr & 15) {
tcg_out_nop(s);
}
- qemu_ld_trampoline[i] = s->code_ptr;
+ qemu_ld_trampoline[i] = tcg_splitwx_to_rx(s->code_ptr);
if (SPARC64 || TARGET_LONG_BITS == 32) {
ra = TCG_REG_O3;
@@ -958,7 +959,7 @@ static void build_trampolines(TCGContext *s)
while ((uintptr_t)s->code_ptr & 15) {
tcg_out_nop(s);
}
- qemu_st_trampoline[i] = s->code_ptr;
+ qemu_st_trampoline[i] = tcg_splitwx_to_rx(s->code_ptr);
if (SPARC64) {
emit_extend(s, TCG_REG_O2, i);
@@ -1038,7 +1039,8 @@ static void tcg_target_qemu_prologue(TCGContext *s)
tcg_out_nop(s);
/* Epilogue for goto_ptr. */
- tcg_code_gen_epilogue = s->code_ptr;
+ /* TODO: Cast goes away when all hosts converted */
+ tcg_code_gen_epilogue = (void *)tcg_splitwx_to_rx(s->code_ptr);
tcg_out_arithi(s, TCG_REG_G0, TCG_REG_I7, 8, RETURN);
/* delay slot */
tcg_out_movi_imm13(s, TCG_REG_O0, 0);
@@ -1163,7 +1165,7 @@ static void tcg_out_qemu_ld(TCGContext *s, TCGReg data, TCGReg addr,
#ifdef CONFIG_SOFTMMU
unsigned memi = get_mmuidx(oi);
TCGReg addrz, param;
- tcg_insn_unit *func;
+ const tcg_insn_unit *func;
tcg_insn_unit *label_ptr;
addrz = tcg_out_tlb_load(s, addr, memi, memop,
@@ -1245,7 +1247,7 @@ static void tcg_out_qemu_st(TCGContext *s, TCGReg data, TCGReg addr,
#ifdef CONFIG_SOFTMMU
unsigned memi = get_mmuidx(oi);
TCGReg addrz, param;
- tcg_insn_unit *func;
+ const tcg_insn_unit *func;
tcg_insn_unit *label_ptr;
addrz = tcg_out_tlb_load(s, addr, memi, memop,
--
2.25.1
next prev parent reply other threads:[~2020-12-14 14:12 UTC|newest]
Thread overview: 88+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-12-14 14:02 [PATCH v4 00/43] Mirror map JIT memory for TCG Richard Henderson
2020-12-14 14:02 ` [PATCH v4 01/43] tcg: Do not flush icache for interpreter Richard Henderson
2020-12-14 21:17 ` Joelle van Dyne
2020-12-14 14:02 ` [PATCH v4 02/43] util: Extract flush_icache_range to cacheflush.c Richard Henderson
2020-12-14 21:59 ` Philippe Mathieu-Daudé
2020-12-15 1:41 ` Joelle van Dyne
2020-12-14 14:02 ` [PATCH v4 03/43] util: Enhance flush_icache_range with separate data pointer Richard Henderson
2020-12-15 1:43 ` Joelle van Dyne
2020-12-14 14:02 ` [PATCH v4 04/43] util: Specialize flush_idcache_range for aarch64 Richard Henderson
2020-12-15 1:46 ` Joelle van Dyne
2020-12-14 14:02 ` [PATCH v4 05/43] tcg: Move tcg prologue pointer out of TCGContext Richard Henderson
2020-12-14 22:01 ` Philippe Mathieu-Daudé
2020-12-15 1:48 ` Joelle van Dyne
2020-12-14 14:02 ` [PATCH v4 06/43] tcg: Move tcg epilogue " Richard Henderson
2020-12-15 1:54 ` Joelle van Dyne
2020-12-14 14:02 ` [PATCH v4 07/43] tcg: Add in_code_gen_buffer Richard Henderson
2020-12-14 22:09 ` Philippe Mathieu-Daudé
2020-12-15 22:43 ` Richard Henderson
2020-12-15 23:15 ` Philippe Mathieu-Daudé
2020-12-14 14:02 ` [PATCH v4 08/43] tcg: Introduce tcg_splitwx_to_{rx,rw} Richard Henderson
2021-01-02 20:00 ` Joelle van Dyne
2020-12-14 14:02 ` [PATCH v4 09/43] tcg: Adjust TCGLabel for const Richard Henderson
2021-01-02 20:01 ` Joelle van Dyne
2020-12-14 14:02 ` [PATCH v4 10/43] tcg: Adjust tcg_out_call " Richard Henderson
2020-12-14 22:16 ` Philippe Mathieu-Daudé
2021-01-02 20:02 ` Joelle van Dyne
2020-12-14 14:02 ` [PATCH v4 11/43] tcg: Adjust tcg_out_label " Richard Henderson
2020-12-14 22:18 ` Philippe Mathieu-Daudé
2021-01-02 20:03 ` Joelle van Dyne
2020-12-14 14:02 ` [PATCH v4 12/43] tcg: Adjust tcg_register_jit " Richard Henderson
2021-01-02 20:03 ` Joelle van Dyne
2020-12-14 14:02 ` [PATCH v4 13/43] tcg: Adjust tb_target_set_jmp_target for split-wx Richard Henderson
2021-01-02 20:05 ` Joelle van Dyne
2020-12-14 14:02 ` [PATCH v4 14/43] tcg: Make DisasContextBase.tb const Richard Henderson
2020-12-14 22:14 ` Philippe Mathieu-Daudé
2021-01-02 20:05 ` Joelle van Dyne
2020-12-14 14:02 ` [PATCH v4 15/43] tcg: Make tb arg to synchronize_from_tb const Richard Henderson
2020-12-14 22:15 ` Philippe Mathieu-Daudé
2021-01-02 20:06 ` Joelle van Dyne
2020-12-14 14:02 ` [PATCH v4 16/43] tcg: Use Error with alloc_code_gen_buffer Richard Henderson
2021-01-02 20:09 ` Joelle van Dyne
2020-12-14 14:02 ` [PATCH v4 17/43] tcg: Add --accel tcg,split-wx property Richard Henderson
2020-12-15 2:05 ` Joelle van Dyne
2020-12-15 22:50 ` Richard Henderson
2020-12-14 14:02 ` [PATCH v4 18/43] accel/tcg: Support split-wx for linux with memfd Richard Henderson
2021-01-02 20:11 ` Joelle van Dyne
2020-12-14 14:02 ` [PATCH v4 19/43] accel/tcg: Support split-wx for darwin/iOS with vm_remap Richard Henderson
2021-01-05 6:02 ` Joelle van Dyne
2021-01-05 16:57 ` Richard Henderson
2020-12-14 14:02 ` [PATCH v4 20/43] tcg: Return the TB pointer from the rx region from exit_tb Richard Henderson
2021-01-02 20:14 ` Joelle van Dyne
2020-12-14 14:02 ` [PATCH v4 21/43] tcg/i386: Support split-wx code generation Richard Henderson
2021-01-02 20:15 ` Joelle van Dyne
2020-12-14 14:02 ` [PATCH v4 22/43] tcg/aarch64: Use B not BL for tcg_out_goto_long Richard Henderson
2021-01-02 20:15 ` Joelle van Dyne
2020-12-14 14:02 ` [PATCH v4 23/43] tcg/aarch64: Support split-wx code generation Richard Henderson
2021-01-02 20:16 ` Joelle van Dyne
2020-12-14 14:02 ` [PATCH v4 24/43] disas: Push const down through host disasassembly Richard Henderson
2020-12-14 22:13 ` Philippe Mathieu-Daudé
2021-01-02 20:18 ` Joelle van Dyne
2020-12-14 14:02 ` [PATCH v4 25/43] tcg/tci: Push const down through bytecode reading Richard Henderson
2021-01-02 20:19 ` Joelle van Dyne
2020-12-14 14:02 ` [PATCH v4 26/43] tcg: Introduce tcg_tbrel_diff Richard Henderson
2021-01-02 20:19 ` Joelle van Dyne
2020-12-14 14:02 ` [PATCH v4 27/43] tcg/ppc: Use tcg_tbrel_diff Richard Henderson
2020-12-14 14:02 ` [PATCH v4 28/43] tcg/ppc: Use tcg_out_mem_long to reset TCG_REG_TB Richard Henderson
2020-12-14 14:03 ` [PATCH v4 29/43] tcg/ppc: Support split-wx code generation Richard Henderson
2020-12-14 14:03 ` [PATCH v4 30/43] tcg/sparc: Use tcg_tbrel_diff Richard Henderson
2020-12-14 14:03 ` Richard Henderson [this message]
2020-12-14 14:03 ` [PATCH v4 32/43] tcg/s390: " Richard Henderson
2020-12-14 14:03 ` [PATCH v4 33/43] tcg/s390: Support split-wx code generation Richard Henderson
2020-12-14 14:03 ` [PATCH v4 34/43] tcg/riscv: Fix branch range checks Richard Henderson
2020-12-15 17:29 ` Alistair Francis
2020-12-14 14:03 ` [PATCH v4 35/43] tcg/riscv: Remove branch-over-branch fallback Richard Henderson
2020-12-15 17:30 ` Alistair Francis
2020-12-14 14:03 ` [PATCH v4 36/43] tcg/riscv: Support split-wx code generation Richard Henderson
2020-12-15 17:31 ` Alistair Francis
2020-12-14 14:03 ` [PATCH v4 37/43] accel/tcg: Add mips support to alloc_code_gen_buffer_splitwx_memfd Richard Henderson
2020-12-14 14:03 ` [PATCH v4 38/43] tcg/mips: Do not assert on relocation overflow Richard Henderson
2020-12-14 14:03 ` [PATCH v4 39/43] tcg/mips: Support split-wx code generation Richard Henderson
2020-12-14 14:03 ` [PATCH v4 40/43] tcg/arm: " Richard Henderson
2020-12-14 14:03 ` [PATCH v4 41/43] tcg: Remove TCG_TARGET_SUPPORT_MIRROR Richard Henderson
2021-01-02 20:22 ` Joelle van Dyne
2020-12-14 14:03 ` [PATCH v4 42/43] tcg: Constify tcg_code_gen_epilogue Richard Henderson
2021-01-02 20:23 ` Joelle van Dyne
2020-12-14 14:03 ` [PATCH v4 43/43] tcg: Constify TCGLabelQemuLdst.raddr Richard Henderson
2021-01-02 20:24 ` Joelle van Dyne
2020-12-14 21:01 ` [PATCH v4 00/43] Mirror map JIT memory for TCG no-reply
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201214140314.18544-32-richard.henderson@linaro.org \
--to=richard.henderson@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).