qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Guenter Roeck <linux@roeck-us.net>
To: BALATON Zoltan <balaton@eik.bme.hu>
Cc: philmd@redhat.com, Huacai Chen <chenhuacai@kernel.org>,
	Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>,
	qemu-devel@nongnu.org, John Snow <jsnow@redhat.com>
Subject: Re: [PATCH 1/2] ide: Make room for flags in PCIIDEState and add one for legacy mode
Date: Thu, 24 Dec 2020 16:37:28 -0800	[thread overview]
Message-ID: <20201225003728.GA34067@roeck-us.net> (raw)

On Fri, Dec 25, 2020 at 12:23:37AM +0100, BALATON Zoltan wrote:
> We'll need a flag for implementing some device specific behaviour in
> via-ide but we already have a currently CMD646 specific field that can
> be repurposed for this and leave room for furhter flags if needed in

further

> the future. This patch changes the "secondary" field to "flags" and
> change CMD646 and its users accordingly and define a new flag for
> forcing legacy mode that will be used by via-ide for now.
> 
> Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>

Reviewed-and-tested-by: Guenter Roeck <linux@roeck-us.net>

> ---
>  hw/ide/cmd646.c      | 4 ++--
>  hw/sparc64/sun4u.c   | 2 +-
>  include/hw/ide/pci.h | 7 ++++++-
>  3 files changed, 9 insertions(+), 4 deletions(-)
> 
> diff --git a/hw/ide/cmd646.c b/hw/ide/cmd646.c
> index c254631485..7a96016116 100644
> --- a/hw/ide/cmd646.c
> +++ b/hw/ide/cmd646.c
> @@ -256,7 +256,7 @@ static void pci_cmd646_ide_realize(PCIDevice *dev, Error **errp)
>      pci_conf[PCI_CLASS_PROG] = 0x8f;
>  
>      pci_conf[CNTRL] = CNTRL_EN_CH0; // enable IDE0
> -    if (d->secondary) {
> +    if (d->flags & BIT(PCI_IDE_SECONDARY)) {
>          /* XXX: if not enabled, really disable the seconday IDE controller */
>          pci_conf[CNTRL] |= CNTRL_EN_CH1; /* enable IDE1 */
>      }
> @@ -314,7 +314,7 @@ static void pci_cmd646_ide_exitfn(PCIDevice *dev)
>  }
>  
>  static Property cmd646_ide_properties[] = {
> -    DEFINE_PROP_UINT32("secondary", PCIIDEState, secondary, 0),
> +    DEFINE_PROP_BIT("secondary", PCIIDEState, flags, PCI_IDE_SECONDARY, false),
>      DEFINE_PROP_END_OF_LIST(),
>  };
>  
> diff --git a/hw/sparc64/sun4u.c b/hw/sparc64/sun4u.c
> index 0fa13a7330..c46baa9f48 100644
> --- a/hw/sparc64/sun4u.c
> +++ b/hw/sparc64/sun4u.c
> @@ -674,7 +674,7 @@ static void sun4uv_init(MemoryRegion *address_space_mem,
>      }
>  
>      pci_dev = pci_new(PCI_DEVFN(3, 0), "cmd646-ide");
> -    qdev_prop_set_uint32(&pci_dev->qdev, "secondary", 1);
> +    qdev_prop_set_bit(&pci_dev->qdev, "secondary", true);
>      pci_realize_and_unref(pci_dev, pci_busA, &error_fatal);
>      pci_ide_create_devs(pci_dev);
>  
> diff --git a/include/hw/ide/pci.h b/include/hw/ide/pci.h
> index d8384e1c42..75d1a32f6d 100644
> --- a/include/hw/ide/pci.h
> +++ b/include/hw/ide/pci.h
> @@ -42,6 +42,11 @@ typedef struct BMDMAState {
>  #define TYPE_PCI_IDE "pci-ide"
>  OBJECT_DECLARE_SIMPLE_TYPE(PCIIDEState, PCI_IDE)
>  
> +enum {
> +    PCI_IDE_SECONDARY, /* used only for cmd646 */
> +    PCI_IDE_LEGACY_MODE
> +};
> +
>  struct PCIIDEState {
>      /*< private >*/
>      PCIDevice parent_obj;
> @@ -49,7 +54,7 @@ struct PCIIDEState {
>  
>      IDEBus bus[2];
>      BMDMAState bmdma[2];
> -    uint32_t secondary; /* used only for cmd646 */
> +    uint32_t flags;
>      MemoryRegion bmdma_bar;
>      MemoryRegion cmd_bar[2];
>      MemoryRegion data_bar[2];
> -- 
> 2.21.3
> 


             reply	other threads:[~2020-12-25  0:39 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-12-25  0:37 Guenter Roeck [this message]
  -- strict thread matches above, loose matches on Subject: below --
2020-12-24 23:23 [PATCH 0/2] Fix via-ide for fuloong2e BALATON Zoltan via
2020-12-24 23:23 ` [PATCH 1/2] ide: Make room for flags in PCIIDEState and add one for legacy mode BALATON Zoltan via
2020-12-27 14:16   ` Philippe Mathieu-Daudé

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201225003728.GA34067@roeck-us.net \
    --to=linux@roeck-us.net \
    --cc=balaton@eik.bme.hu \
    --cc=chenhuacai@kernel.org \
    --cc=jsnow@redhat.com \
    --cc=mark.cave-ayland@ilande.co.uk \
    --cc=philmd@redhat.com \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).