qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Richard Henderson <richard.henderson@linaro.org>
To: qemu-devel@nongnu.org
Cc: peter.maydell@linaro.org, "Alex Bennée" <alex.bennee@linaro.org>
Subject: [PULL 10/24] tcg/optimize: Adjust TempOptInfo allocation
Date: Wed, 13 Jan 2021 16:16:40 -1000	[thread overview]
Message-ID: <20210114021654.647242-11-richard.henderson@linaro.org> (raw)
In-Reply-To: <20210114021654.647242-1-richard.henderson@linaro.org>

Do not allocate a large block for indexing.  Instead, allocate
for each temporary as they are seen.

In general, this will use less memory, if we consider that most
TBs do not touch every target register.  This also allows us to
allocate TempOptInfo for new temps created during optimization.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
 tcg/optimize.c | 60 ++++++++++++++++++++++++++++----------------------
 1 file changed, 34 insertions(+), 26 deletions(-)

diff --git a/tcg/optimize.c b/tcg/optimize.c
index e42f9c89a8..49bf1386c7 100644
--- a/tcg/optimize.c
+++ b/tcg/optimize.c
@@ -89,35 +89,41 @@ static void reset_temp(TCGArg arg)
 }
 
 /* Initialize and activate a temporary.  */
-static void init_ts_info(TempOptInfo *infos,
-                         TCGTempSet *temps_used, TCGTemp *ts)
+static void init_ts_info(TCGTempSet *temps_used, TCGTemp *ts)
 {
     size_t idx = temp_idx(ts);
-    if (!test_bit(idx, temps_used->l)) {
-        TempOptInfo *ti = &infos[idx];
+    TempOptInfo *ti;
 
+    if (test_bit(idx, temps_used->l)) {
+        return;
+    }
+    set_bit(idx, temps_used->l);
+
+    ti = ts->state_ptr;
+    if (ti == NULL) {
+        ti = tcg_malloc(sizeof(TempOptInfo));
         ts->state_ptr = ti;
-        ti->next_copy = ts;
-        ti->prev_copy = ts;
-        if (ts->kind == TEMP_CONST) {
-            ti->is_const = true;
-            ti->val = ti->mask = ts->val;
-            if (TCG_TARGET_REG_BITS > 32 && ts->type == TCG_TYPE_I32) {
-                /* High bits of a 32-bit quantity are garbage.  */
-                ti->mask |= ~0xffffffffull;
-            }
-        } else {
-            ti->is_const = false;
-            ti->mask = -1;
+    }
+
+    ti->next_copy = ts;
+    ti->prev_copy = ts;
+    if (ts->kind == TEMP_CONST) {
+        ti->is_const = true;
+        ti->val = ts->val;
+        ti->mask = ts->val;
+        if (TCG_TARGET_REG_BITS > 32 && ts->type == TCG_TYPE_I32) {
+            /* High bits of a 32-bit quantity are garbage.  */
+            ti->mask |= ~0xffffffffull;
         }
-        set_bit(idx, temps_used->l);
+    } else {
+        ti->is_const = false;
+        ti->mask = -1;
     }
 }
 
-static void init_arg_info(TempOptInfo *infos,
-                          TCGTempSet *temps_used, TCGArg arg)
+static void init_arg_info(TCGTempSet *temps_used, TCGArg arg)
 {
-    init_ts_info(infos, temps_used, arg_temp(arg));
+    init_ts_info(temps_used, arg_temp(arg));
 }
 
 static TCGTemp *find_better_copy(TCGContext *s, TCGTemp *ts)
@@ -604,9 +610,8 @@ static bool swap_commutative2(TCGArg *p1, TCGArg *p2)
 /* Propagate constants and copies, fold constant expressions. */
 void tcg_optimize(TCGContext *s)
 {
-    int nb_temps, nb_globals;
+    int nb_temps, nb_globals, i;
     TCGOp *op, *op_next, *prev_mb = NULL;
-    TempOptInfo *infos;
     TCGTempSet temps_used;
 
     /* Array VALS has an element for each temp.
@@ -616,12 +621,15 @@ void tcg_optimize(TCGContext *s)
 
     nb_temps = s->nb_temps;
     nb_globals = s->nb_globals;
+
     bitmap_zero(temps_used.l, nb_temps);
-    infos = tcg_malloc(sizeof(TempOptInfo) * nb_temps);
+    for (i = 0; i < nb_temps; ++i) {
+        s->temps[i].state_ptr = NULL;
+    }
 
     QTAILQ_FOREACH_SAFE(op, &s->ops, link, op_next) {
         uint64_t mask, partmask, affected, tmp;
-        int nb_oargs, nb_iargs, i;
+        int nb_oargs, nb_iargs;
         TCGOpcode opc = op->opc;
         const TCGOpDef *def = &tcg_op_defs[opc];
 
@@ -633,14 +641,14 @@ void tcg_optimize(TCGContext *s)
             for (i = 0; i < nb_oargs + nb_iargs; i++) {
                 TCGTemp *ts = arg_temp(op->args[i]);
                 if (ts) {
-                    init_ts_info(infos, &temps_used, ts);
+                    init_ts_info(&temps_used, ts);
                 }
             }
         } else {
             nb_oargs = def->nb_oargs;
             nb_iargs = def->nb_iargs;
             for (i = 0; i < nb_oargs + nb_iargs; i++) {
-                init_arg_info(infos, &temps_used, op->args[i]);
+                init_arg_info(&temps_used, op->args[i]);
             }
         }
 
-- 
2.25.1



  parent reply	other threads:[~2021-01-14  2:27 UTC|newest]

Thread overview: 50+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-01-14  2:16 [PULL 00/24] tcg patch queue Richard Henderson
2021-01-14  2:16 ` [PULL 01/24] tcg: Use tcg_out_dupi_vec from temp_load Richard Henderson
2021-01-14  2:16 ` [PULL 02/24] tcg: Increase tcg_out_dupi_vec immediate to int64_t Richard Henderson
2021-01-14  2:16 ` [PULL 03/24] tcg: Consolidate 3 bits into enum TCGTempKind Richard Henderson
2021-01-14  2:16 ` [PULL 04/24] tcg: Add temp_readonly Richard Henderson
2021-01-14  2:16 ` [PULL 05/24] tcg: Expand TCGTemp.val to 64-bits Richard Henderson
2021-01-14  2:16 ` [PULL 06/24] tcg: Rename struct tcg_temp_info to TempOptInfo Richard Henderson
2021-01-14  2:16 ` [PULL 07/24] tcg: Expand TempOptInfo to 64-bits Richard Henderson
2021-01-14  2:16 ` [PULL 08/24] tcg: Introduce TYPE_CONST temporaries Richard Henderson
2021-01-14  2:16 ` [PULL 09/24] tcg/optimize: Improve find_better_copy Richard Henderson
2021-01-14  2:16 ` Richard Henderson [this message]
2021-01-14  2:16 ` [PULL 11/24] tcg/optimize: Use tcg_constant_internal with constant folding Richard Henderson
2021-01-15 23:03   ` Alistair Francis
2021-01-16 17:24     ` Richard Henderson
2021-01-18 20:17       ` Laurent Vivier
2021-01-18 21:03         ` Richard Henderson
2021-02-01 20:45   ` Richard W.M. Jones
2021-02-01 20:53     ` Richard W.M. Jones
2021-02-04  2:22     ` Richard Henderson
2021-02-04  6:41       ` David Hildenbrand
2021-02-04  7:55         ` David Hildenbrand
2021-02-04  8:38           ` David Hildenbrand
2021-02-04  9:03             ` Richard W.M. Jones
2021-02-04  9:12               ` David Hildenbrand
2021-02-04  9:29               ` Richard W.M. Jones
2021-02-04  9:30                 ` Richard W.M. Jones
2021-02-04  9:37                 ` David Hildenbrand
2021-02-04 16:04                   ` Philippe Mathieu-Daudé
2021-02-04 16:08                     ` Philippe Mathieu-Daudé
2021-02-04 16:12                     ` David Hildenbrand
2021-02-04 16:29                     ` David Hildenbrand
2021-02-04 16:57                       ` Eric Blake
2021-02-04 17:33                       ` Richard Henderson
2021-02-04 16:48                     ` Richard W.M. Jones
2021-02-04 16:52                     ` Eric Blake
2021-01-14  2:16 ` [PULL 12/24] tcg: Convert tcg_gen_dupi_vec to TCG_CONST Richard Henderson
2021-01-14  2:16 ` [PULL 13/24] tcg: Use tcg_constant_i32 with icount expander Richard Henderson
2021-01-14  2:16 ` [PULL 14/24] tcg: Use tcg_constant_{i32,i64} with tcg int expanders Richard Henderson
2021-02-10 10:38   ` Alex Bennée
2021-01-14  2:16 ` [PULL 15/24] tcg: Use tcg_constant_{i32,i64} with tcg plugins Richard Henderson
2021-01-14  2:16 ` [PULL 16/24] tcg: Use tcg_constant_{i32,i64,vec} with gvec expanders Richard Henderson
2021-01-14  2:16 ` [PULL 17/24] tcg/tci: Add special tci_movi_{i32,i64} opcodes Richard Henderson
2021-01-14  2:16 ` [PULL 18/24] tcg: Remove movi and dupi opcodes Richard Henderson
2021-01-14  2:16 ` [PULL 19/24] tcg: Add tcg_reg_alloc_dup2 Richard Henderson
2021-01-14  2:16 ` [PULL 20/24] tcg/i386: Use tcg_constant_vec with tcg vec expanders Richard Henderson
2021-01-14  2:16 ` [PULL 21/24] tcg: Remove tcg_gen_dup{8,16,32,64}i_vec Richard Henderson
2021-01-14  2:16 ` [PULL 22/24] tcg/ppc: Use tcg_constant_vec with tcg vec expanders Richard Henderson
2021-01-14  2:16 ` [PULL 23/24] tcg/aarch64: " Richard Henderson
2021-01-14  2:16 ` [PULL 24/24] decodetree: Open files with encoding='utf-8' Richard Henderson
2021-01-14 13:13 ` [PULL 00/24] tcg patch queue Peter Maydell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210114021654.647242-11-richard.henderson@linaro.org \
    --to=richard.henderson@linaro.org \
    --cc=alex.bennee@linaro.org \
    --cc=peter.maydell@linaro.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).