From: Richard Henderson <richard.henderson@linaro.org>
To: qemu-devel@nongnu.org
Cc: peter.maydell@linaro.org, qemu-arm@nongnu.org
Subject: [PATCH v3 01/21] tcg: Introduce target-specific page data for user-only
Date: Fri, 15 Jan 2021 12:46:25 -1000 [thread overview]
Message-ID: <20210115224645.1196742-2-richard.henderson@linaro.org> (raw)
In-Reply-To: <20210115224645.1196742-1-richard.henderson@linaro.org>
This data can be allocated by page_alloc_target_data() and
released by page_set_flags(start, end, prot | PAGE_RESET).
This data will be used to hold tag memory for AArch64 MTE.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
v3: Add doc comments; tweak alloc so that the !PAGE_VALID case is clear.
---
include/exec/cpu-all.h | 42 +++++++++++++++++++++++++++++++++------
accel/tcg/translate-all.c | 28 ++++++++++++++++++++++++++
linux-user/mmap.c | 4 +++-
linux-user/syscall.c | 4 ++--
4 files changed, 69 insertions(+), 9 deletions(-)
diff --git a/include/exec/cpu-all.h b/include/exec/cpu-all.h
index 4b5408c341..99a09ee137 100644
--- a/include/exec/cpu-all.h
+++ b/include/exec/cpu-all.h
@@ -264,15 +264,21 @@ extern intptr_t qemu_host_page_mask;
#define PAGE_EXEC 0x0004
#define PAGE_BITS (PAGE_READ | PAGE_WRITE | PAGE_EXEC)
#define PAGE_VALID 0x0008
-/* original state of the write flag (used when tracking self-modifying
- code */
+/*
+ * Original state of the write flag (used when tracking self-modifying code)
+ */
#define PAGE_WRITE_ORG 0x0010
-/* Invalidate the TLB entry immediately, helpful for s390x
- * Low-Address-Protection. Used with PAGE_WRITE in tlb_set_page_with_attrs() */
-#define PAGE_WRITE_INV 0x0040
+/*
+ * Invalidate the TLB entry immediately, helpful for s390x
+ * Low-Address-Protection. Used with PAGE_WRITE in tlb_set_page_with_attrs()
+ */
+#define PAGE_WRITE_INV 0x0020
+/* For use with page_set_flags: page is being replaced; target_data cleared. */
+#define PAGE_RESET 0x0040
+
#if defined(CONFIG_BSD) && defined(CONFIG_USER_ONLY)
/* FIXME: Code that sets/uses this is broken and needs to go away. */
-#define PAGE_RESERVED 0x0020
+#define PAGE_RESERVED 0x0100
#endif
/* Target-specific bits that will be used via page_get_flags(). */
#define PAGE_TARGET_1 0x0080
@@ -287,6 +293,30 @@ int walk_memory_regions(void *, walk_memory_regions_fn);
int page_get_flags(target_ulong address);
void page_set_flags(target_ulong start, target_ulong end, int flags);
int page_check_range(target_ulong start, target_ulong len, int flags);
+
+/**
+ * page_alloc_target_data(address, size)
+ * @address: guest virtual address
+ * @size: size of data to allocate
+ *
+ * Allocate @size bytes of out-of-band data to associate with the
+ * guest page at @address. If the page is not mapped, NULL will
+ * be returned. If there is existing data associated with @address,
+ * no new memory will be allocated.
+ *
+ * The memory will be freed when the guest page is deallocated,
+ * e.g. with the munmap system call.
+ */
+void *page_alloc_target_data(target_ulong address, size_t size);
+
+/**
+ * page_get_target_data(address)
+ * @address: guest virtual address
+ *
+ * Return any out-of-bound memory assocated with the guest page
+ * at @address, as per page_alloc_target_data.
+ */
+void *page_get_target_data(target_ulong address);
#endif
CPUArchState *cpu_copy(CPUArchState *env);
diff --git a/accel/tcg/translate-all.c b/accel/tcg/translate-all.c
index e9de6ff9dd..7bcb6663f1 100644
--- a/accel/tcg/translate-all.c
+++ b/accel/tcg/translate-all.c
@@ -113,6 +113,7 @@ typedef struct PageDesc {
unsigned int code_write_count;
#else
unsigned long flags;
+ void *target_data;
#endif
#ifndef CONFIG_USER_ONLY
QemuSpin lock;
@@ -2740,6 +2741,7 @@ int page_get_flags(target_ulong address)
void page_set_flags(target_ulong start, target_ulong end, int flags)
{
target_ulong addr, len;
+ bool reset_target_data;
/* This function should never be called with addresses outside the
guest address space. If this assert fires, it probably indicates
@@ -2754,6 +2756,8 @@ void page_set_flags(target_ulong start, target_ulong end, int flags)
if (flags & PAGE_WRITE) {
flags |= PAGE_WRITE_ORG;
}
+ reset_target_data = !(flags & PAGE_VALID) || (flags & PAGE_RESET);
+ flags &= ~PAGE_RESET;
for (addr = start, len = end - start;
len != 0;
@@ -2767,10 +2771,34 @@ void page_set_flags(target_ulong start, target_ulong end, int flags)
p->first_tb) {
tb_invalidate_phys_page(addr, 0);
}
+ if (reset_target_data && p->target_data) {
+ g_free(p->target_data);
+ p->target_data = NULL;
+ }
p->flags = flags;
}
}
+void *page_get_target_data(target_ulong address)
+{
+ PageDesc *p = page_find(address >> TARGET_PAGE_BITS);
+ return p ? p->target_data : NULL;
+}
+
+void *page_alloc_target_data(target_ulong address, size_t size)
+{
+ PageDesc *p = page_find(address >> TARGET_PAGE_BITS);
+ void *ret = NULL;
+
+ if (p->flags & PAGE_VALID) {
+ ret = p->target_data;
+ if (!ret) {
+ p->target_data = ret = g_malloc0(size);
+ }
+ }
+ return ret;
+}
+
int page_check_range(target_ulong start, target_ulong len, int flags)
{
PageDesc *p;
diff --git a/linux-user/mmap.c b/linux-user/mmap.c
index 810653c503..c693505b60 100644
--- a/linux-user/mmap.c
+++ b/linux-user/mmap.c
@@ -599,6 +599,7 @@ abi_long target_mmap(abi_ulong start, abi_ulong len, int target_prot,
}
}
the_end1:
+ page_flags |= PAGE_RESET;
page_set_flags(start, start + len, page_flags);
the_end:
trace_target_mmap_complete(start);
@@ -792,7 +793,8 @@ abi_long target_mremap(abi_ulong old_addr, abi_ulong old_size,
new_addr = h2g(host_addr);
prot = page_get_flags(old_addr);
page_set_flags(old_addr, old_addr + old_size, 0);
- page_set_flags(new_addr, new_addr + new_size, prot | PAGE_VALID);
+ page_set_flags(new_addr, new_addr + new_size,
+ prot | PAGE_VALID | PAGE_RESET);
}
tb_invalidate_phys_range(new_addr, new_addr + new_size);
mmap_unlock();
diff --git a/linux-user/syscall.c b/linux-user/syscall.c
index d182890ff0..bec2ab7769 100644
--- a/linux-user/syscall.c
+++ b/linux-user/syscall.c
@@ -4625,8 +4625,8 @@ static inline abi_ulong do_shmat(CPUArchState *cpu_env,
raddr=h2g((unsigned long)host_raddr);
page_set_flags(raddr, raddr + shm_info.shm_segsz,
- PAGE_VALID | PAGE_READ |
- ((shmflg & SHM_RDONLY)? 0 : PAGE_WRITE));
+ PAGE_VALID | PAGE_RESET | PAGE_READ |
+ (shmflg & SHM_RDONLY ? 0 : PAGE_WRITE));
for (i = 0; i < N_SHM_REGIONS; i++) {
if (!shm_regions[i].in_use) {
--
2.25.1
next prev parent reply other threads:[~2021-01-15 22:49 UTC|newest]
Thread overview: 46+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-01-15 22:46 [PATCH v3 00/21] target-arm: Implement ARMv8.5-MemTag, user mode Richard Henderson
2021-01-15 22:46 ` Richard Henderson [this message]
2021-01-19 16:53 ` [PATCH v3 01/21] tcg: Introduce target-specific page data for user-only Peter Maydell
2021-01-15 22:46 ` [PATCH v3 02/21] linux-user: Introduce PAGE_ANON Richard Henderson
2021-01-15 22:46 ` [PATCH v3 03/21] exec: Use uintptr_t for guest_base Richard Henderson
2021-01-19 16:56 ` Peter Maydell
2021-01-15 22:46 ` [PATCH v3 04/21] exec: Use uintptr_t in cpu_ldst.h Richard Henderson
2021-01-19 16:56 ` Peter Maydell
2021-01-15 22:46 ` [PATCH v3 05/21] exec: Improve types for guest_addr_valid Richard Henderson
2021-01-19 16:57 ` Peter Maydell
2021-01-15 22:46 ` [PATCH v3 06/21] linux-user: Check for overflow in access_ok Richard Henderson
2021-01-15 22:46 ` [PATCH v3 07/21] linux-user: Tidy VERIFY_READ/VERIFY_WRITE Richard Henderson
2021-01-15 22:46 ` [PATCH v3 08/21] bsd-user: " Richard Henderson
2021-01-16 16:28 ` Warner Losh
2021-01-15 22:46 ` [PATCH v3 09/21] linux-user: Do not use guest_addr_valid for h2g_valid Richard Henderson
2021-01-19 16:59 ` Peter Maydell
2021-01-15 22:46 ` [PATCH v3 10/21] linux-user: Fix guest_addr_valid vs reserved_va Richard Henderson
2021-01-19 17:03 ` Peter Maydell
2021-01-19 17:41 ` Richard Henderson
2021-01-15 22:46 ` [PATCH v3 11/21] exec: Add support for TARGET_TAGGED_ADDRESSES Richard Henderson
2021-01-22 14:13 ` Peter Maydell
2021-01-26 17:10 ` Richard Henderson
2021-01-15 22:46 ` [PATCH v3 12/21] linux-user/aarch64: Implement PR_TAGGED_ADDR_ENABLE Richard Henderson
2021-01-22 11:36 ` Peter Maydell
2021-01-22 11:53 ` Peter Maydell
2021-01-22 12:02 ` Peter Maydell
2021-01-15 22:46 ` [PATCH v3 13/21] linux-user/aarch64: Implement PR_MTE_TCF and PR_MTE_TAG Richard Henderson
2021-01-22 11:48 ` Peter Maydell
2021-01-15 22:46 ` [PATCH v3 14/21] linux-user/aarch64: Implement PROT_MTE Richard Henderson
2021-01-15 22:46 ` [PATCH v3 15/21] target/arm: Split out syndrome.h from internals.h Richard Henderson
2021-01-19 17:07 ` Peter Maydell
2021-01-15 22:46 ` [PATCH v3 16/21] linux-user/aarch64: Pass syndrome to EXC_*_ABORT Richard Henderson
2021-01-19 17:12 ` Peter Maydell
2021-01-15 22:46 ` [PATCH v3 17/21] linux-user/aarch64: Signal SEGV_MTESERR for sync tag check fault Richard Henderson
2021-01-22 12:03 ` Peter Maydell
2021-01-15 22:46 ` [PATCH v3 18/21] linux-user/aarch64: Signal SEGV_MTEAERR for async tag check error Richard Henderson
2021-01-22 13:59 ` Peter Maydell
2021-01-28 8:49 ` Richard Henderson
2021-01-28 10:44 ` Peter Maydell
2021-01-15 22:46 ` [PATCH v3 19/21] target/arm: Add allocation tag storage for user mode Richard Henderson
2021-01-22 14:05 ` Peter Maydell
2021-01-15 22:46 ` [PATCH v3 20/21] target/arm: Enable MTE for user-only Richard Henderson
2021-01-22 14:02 ` Peter Maydell
2021-01-15 22:46 ` [PATCH v3 21/21] tests/tcg/aarch64: Add mte smoke tests Richard Henderson
2021-01-22 14:04 ` Peter Maydell
2021-01-15 23:15 ` [PATCH v3 00/21] target-arm: Implement ARMv8.5-MemTag, user mode no-reply
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210115224645.1196742-2-richard.henderson@linaro.org \
--to=richard.henderson@linaro.org \
--cc=peter.maydell@linaro.org \
--cc=qemu-arm@nongnu.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).