From: Bin Meng <bmeng.cn@gmail.com>
To: "Philippe Mathieu-Daudé" <f4bug@amsat.org>,
"Alistair Francis" <alistair.francis@wdc.com>,
qemu-block@nongnu.org, qemu-riscv@nongnu.org,
qemu-devel@nongnu.org
Cc: Bin Meng <bin.meng@windriver.com>
Subject: [PATCH v2 09/25] hw/sd: ssi-sd: Fix the wrong command index for STOP_TRANSMISSION
Date: Sat, 23 Jan 2021 18:40:00 +0800 [thread overview]
Message-ID: <20210123104016.17485-10-bmeng.cn@gmail.com> (raw)
In-Reply-To: <20210123104016.17485-1-bmeng.cn@gmail.com>
From: Bin Meng <bin.meng@windriver.com>
This fixes the wrong command index for STOP_TRANSMISSION, the
required command to interrupt the multiple block read command,
in the old codes. It should be CMD12 (0x4c), not CMD13 (0x4d).
Fixes: 775616c3ae8c ("Partial SD card SPI mode support")
Signed-off-by: Bin Meng <bin.meng@windriver.com>
---
Changes in v2:
- Make this fix a separate patch from the CMD18 support
hw/sd/ssi-sd.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/hw/sd/ssi-sd.c b/hw/sd/ssi-sd.c
index 5763afeba0..9e2f13374a 100644
--- a/hw/sd/ssi-sd.c
+++ b/hw/sd/ssi-sd.c
@@ -83,7 +83,7 @@ static uint32_t ssi_sd_transfer(SSIPeripheral *dev, uint32_t val)
ssi_sd_state *s = SSI_SD(dev);
/* Special case: allow CMD12 (STOP TRANSMISSION) while reading data. */
- if (s->mode == SSI_SD_DATA_READ && val == 0x4d) {
+ if (s->mode == SSI_SD_DATA_READ && val == 0x4c) {
s->mode = SSI_SD_CMD;
/* There must be at least one byte delay before the card responds. */
s->stopping = 1;
--
2.25.1
next prev parent reply other threads:[~2021-01-23 10:45 UTC|newest]
Thread overview: 49+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-01-23 10:39 [PATCH v2 00/25] hw/riscv: sifive_u: Add missing SPI support Bin Meng
2021-01-23 10:39 ` [PATCH v2 01/25] hw/block: m25p80: Add ISSI SPI flash support Bin Meng
2021-01-23 10:39 ` [PATCH v2 02/25] hw/block: m25p80: Add various ISSI flash information Bin Meng
2021-01-23 10:39 ` [PATCH v2 03/25] hw/sd: ssi-sd: Fix incorrect card response sequence Bin Meng
2021-01-24 17:48 ` Philippe Mathieu-Daudé
2021-01-23 10:39 ` [PATCH v2 04/25] hw/sd: sd: Support CMD59 for SPI mode Bin Meng
2021-01-24 17:21 ` Philippe Mathieu-Daudé
2021-01-23 10:39 ` [PATCH v2 05/25] hw/sd: sd: Drop sd_crc16() Bin Meng
2021-01-24 18:14 ` Philippe Mathieu-Daudé
2021-01-23 10:39 ` [PATCH v2 06/25] util: Add CRC16 (CCITT) calculation routines Bin Meng
2021-01-24 18:59 ` Philippe Mathieu-Daudé
2021-01-24 20:07 ` Richard Henderson
2021-01-24 20:24 ` Philippe Mathieu-Daudé
2021-01-24 21:41 ` Richard Henderson
2021-01-26 7:44 ` Philippe Mathieu-Daudé
2021-01-23 10:39 ` [PATCH v2 07/25] hw/sd: ssi-sd: Suffix a data block with CRC16 Bin Meng
2021-01-24 18:57 ` Philippe Mathieu-Daudé
2021-01-23 10:39 ` [PATCH v2 08/25] hw/sd: ssi-sd: Add a state representing Nac Bin Meng
2021-01-24 17:26 ` Philippe Mathieu-Daudé
2021-01-24 17:47 ` Philippe Mathieu-Daudé
2021-01-23 10:40 ` Bin Meng [this message]
2021-01-24 17:33 ` [PATCH v2 09/25] hw/sd: ssi-sd: Fix the wrong command index for STOP_TRANSMISSION Philippe Mathieu-Daudé
2021-01-24 17:35 ` Philippe Mathieu-Daudé
2021-01-25 0:33 ` Bin Meng
2021-01-25 0:42 ` Bin Meng
2021-01-23 10:40 ` [PATCH v2 10/25] hw/sd: ssi-sd: Support multiple block read Bin Meng
2021-01-23 10:40 ` [PATCH v2 11/25] hw/sd: ssi-sd: Use macros for the dummy value and tokens in the transfer Bin Meng
2021-01-24 17:36 ` Philippe Mathieu-Daudé
2021-01-23 10:40 ` [PATCH v2 12/25] hw/sd: sd: Remove duplicated codes in single/multiple block read/write Bin Meng
2021-01-23 10:40 ` [PATCH v2 13/25] hw/sd: sd: Allow single/multiple block write for SPI mode Bin Meng
2021-01-23 10:40 ` [PATCH v2 14/25] hw/sd: sd.h: Cosmetic change of using spaces Bin Meng
2021-01-24 17:43 ` Philippe Mathieu-Daudé
2021-01-23 10:40 ` [PATCH v2 15/25] hw/sd: Introduce receive_ready() callback Bin Meng
2021-01-23 10:40 ` [PATCH v2 16/25] hw/sd: ssi-sd: Support single block write Bin Meng
2021-01-23 10:40 ` [PATCH v2 17/25] hw/sd: ssi-sd: Support multiple " Bin Meng
2021-01-23 10:40 ` [PATCH v2 18/25] hw/sd: ssi-sd: Bump up version ids of VMStateDescription Bin Meng
2021-01-24 16:59 ` Philippe Mathieu-Daudé
2021-01-24 17:07 ` Philippe Mathieu-Daudé
2021-01-25 1:20 ` Bin Meng
2021-01-25 10:41 ` Dr. David Alan Gilbert
2021-01-25 10:48 ` Bin Meng
2021-01-23 10:40 ` [PATCH v2 19/25] hw/ssi: Add SiFive SPI controller support Bin Meng
2021-01-23 10:40 ` [PATCH v2 20/25] hw/riscv: sifive_u: Add QSPI0 controller and connect a flash Bin Meng
2021-01-23 10:40 ` [PATCH v2 21/25] hw/riscv: sifive_u: Add QSPI2 controller and connect an SD card Bin Meng
2021-01-23 10:40 ` [PATCH v2 22/25] hw/riscv: sifive_u: Change SIFIVE_U_GEM_IRQ to decimal value Bin Meng
2021-01-23 10:40 ` [PATCH v2 23/25] docs/system: Sort targets in alphabetical order Bin Meng
2021-01-23 10:40 ` [PATCH v2 24/25] docs/system: Add RISC-V documentation Bin Meng
2021-01-23 10:40 ` [PATCH v2 25/25] docs/system: riscv: Add documentation for sifive_u machine Bin Meng
2021-01-24 20:07 ` [PATCH v2 00/25] hw/riscv: sifive_u: Add missing SPI support Philippe Mathieu-Daudé
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210123104016.17485-10-bmeng.cn@gmail.com \
--to=bmeng.cn@gmail.com \
--cc=alistair.francis@wdc.com \
--cc=bin.meng@windriver.com \
--cc=f4bug@amsat.org \
--cc=qemu-block@nongnu.org \
--cc=qemu-devel@nongnu.org \
--cc=qemu-riscv@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).