From: Max Reitz <mreitz@redhat.com>
To: qemu-block@nongnu.org
Cc: Kevin Wolf <kwolf@redhat.com>,
Peter Maydell <peter.maydell@linaro.org>,
qemu-devel@nongnu.org, Max Reitz <mreitz@redhat.com>
Subject: [PULL 32/53] block/block-copy: add block_copy_cancel
Date: Tue, 26 Jan 2021 15:19:55 +0100 [thread overview]
Message-ID: <20210126142016.806073-33-mreitz@redhat.com> (raw)
In-Reply-To: <20210126142016.806073-1-mreitz@redhat.com>
From: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Add function to cancel running async block-copy call. It will be used
in backup.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210116214705.822267-8-vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
---
include/block/block-copy.h | 13 +++++++++++++
block/block-copy.c | 24 +++++++++++++++++++-----
2 files changed, 32 insertions(+), 5 deletions(-)
diff --git a/include/block/block-copy.h b/include/block/block-copy.h
index b5a53ad59e..7821850f88 100644
--- a/include/block/block-copy.h
+++ b/include/block/block-copy.h
@@ -74,11 +74,24 @@ void block_copy_call_free(BlockCopyCallState *call_state);
bool block_copy_call_finished(BlockCopyCallState *call_state);
bool block_copy_call_succeeded(BlockCopyCallState *call_state);
bool block_copy_call_failed(BlockCopyCallState *call_state);
+bool block_copy_call_cancelled(BlockCopyCallState *call_state);
int block_copy_call_status(BlockCopyCallState *call_state, bool *error_is_read);
void block_copy_set_speed(BlockCopyState *s, uint64_t speed);
void block_copy_kick(BlockCopyCallState *call_state);
+/*
+ * Cancel running block-copy call.
+ *
+ * Cancel leaves block-copy state valid: dirty bits are correct and you may use
+ * cancel + <run block_copy with same parameters> to emulate pause/resume.
+ *
+ * Note also, that the cancel is async: it only marks block-copy call to be
+ * cancelled. So, the call may be cancelled (block_copy_call_cancelled() reports
+ * true) but not yet finished (block_copy_call_finished() reports false).
+ */
+void block_copy_call_cancel(BlockCopyCallState *call_state);
+
BdrvDirtyBitmap *block_copy_dirty_bitmap(BlockCopyState *s);
void block_copy_set_skip_unallocated(BlockCopyState *s, bool skip);
diff --git a/block/block-copy.c b/block/block-copy.c
index fa27450b14..82cf945693 100644
--- a/block/block-copy.c
+++ b/block/block-copy.c
@@ -51,6 +51,7 @@ typedef struct BlockCopyCallState {
int ret;
bool finished;
QemuCoSleepState *sleep_state;
+ bool cancelled;
/* OUT parameters */
bool error_is_read;
@@ -594,7 +595,7 @@ block_copy_dirty_clusters(BlockCopyCallState *call_state)
assert(QEMU_IS_ALIGNED(offset, s->cluster_size));
assert(QEMU_IS_ALIGNED(bytes, s->cluster_size));
- while (bytes && aio_task_pool_status(aio) == 0) {
+ while (bytes && aio_task_pool_status(aio) == 0 && !call_state->cancelled) {
BlockCopyTask *task;
int64_t status_bytes;
@@ -707,7 +708,7 @@ static int coroutine_fn block_copy_common(BlockCopyCallState *call_state)
do {
ret = block_copy_dirty_clusters(call_state);
- if (ret == 0) {
+ if (ret == 0 && !call_state->cancelled) {
ret = block_copy_wait_one(call_state->s, call_state->offset,
call_state->bytes);
}
@@ -721,7 +722,7 @@ static int coroutine_fn block_copy_common(BlockCopyCallState *call_state)
* 2. We have waited for some intersecting block-copy request
* It may have failed and produced new dirty bits.
*/
- } while (ret > 0);
+ } while (ret > 0 && !call_state->cancelled);
call_state->finished = true;
@@ -801,12 +802,19 @@ bool block_copy_call_finished(BlockCopyCallState *call_state)
bool block_copy_call_succeeded(BlockCopyCallState *call_state)
{
- return call_state->finished && call_state->ret == 0;
+ return call_state->finished && !call_state->cancelled &&
+ call_state->ret == 0;
}
bool block_copy_call_failed(BlockCopyCallState *call_state)
{
- return call_state->finished && call_state->ret < 0;
+ return call_state->finished && !call_state->cancelled &&
+ call_state->ret < 0;
+}
+
+bool block_copy_call_cancelled(BlockCopyCallState *call_state)
+{
+ return call_state->cancelled;
}
int block_copy_call_status(BlockCopyCallState *call_state, bool *error_is_read)
@@ -818,6 +826,12 @@ int block_copy_call_status(BlockCopyCallState *call_state, bool *error_is_read)
return call_state->ret;
}
+void block_copy_call_cancel(BlockCopyCallState *call_state)
+{
+ call_state->cancelled = true;
+ block_copy_kick(call_state);
+}
+
BdrvDirtyBitmap *block_copy_dirty_bitmap(BlockCopyState *s)
{
return s->copy_bitmap;
--
2.29.2
next prev parent reply other threads:[~2021-01-26 14:43 UTC|newest]
Thread overview: 59+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-01-26 14:19 [PULL 00/53] Block patches Max Reitz
2021-01-26 14:19 ` [PULL 01/53] iotests: fix _check_o_direct Max Reitz
2021-01-26 14:19 ` [PULL 02/53] copy-on-read: support preadv/pwritev_part functions Max Reitz
2021-01-26 14:19 ` [PULL 03/53] block: add API function to insert a node Max Reitz
2021-01-26 14:19 ` [PULL 04/53] copy-on-read: add filter drop function Max Reitz
2021-01-26 14:19 ` [PULL 05/53] qapi: add filter-node-name to block-stream Max Reitz
2021-01-26 14:19 ` [PULL 06/53] qapi: copy-on-read filter: add 'bottom' option Max Reitz
2021-01-26 14:19 ` [PULL 07/53] iotests: add #310 to test bottom node in COR driver Max Reitz
2021-01-26 14:19 ` [PULL 08/53] block: include supported_read_flags into BDS structure Max Reitz
2021-01-26 14:19 ` [PULL 09/53] copy-on-read: skip non-guest reads if no copy needed Max Reitz
2021-01-26 14:19 ` [PULL 10/53] stream: rework backing-file changing Max Reitz
2021-01-26 14:19 ` [PULL 11/53] qapi: block-stream: add "bottom" argument Max Reitz
2021-01-26 14:19 ` [PULL 12/53] iotests: 30: prepare to COR filter insertion by stream job Max Reitz
2021-01-26 14:19 ` [PULL 13/53] block/stream: add s->target_bs Max Reitz
2021-01-26 14:19 ` [PULL 14/53] block: apply COR-filter to block-stream jobs Max Reitz
2021-01-28 18:38 ` Philippe Mathieu-Daudé
2021-01-29 5:26 ` Vladimir Sementsov-Ogievskiy
2021-01-29 8:23 ` Max Reitz
2021-01-29 9:23 ` Philippe Mathieu-Daudé
2021-01-26 14:19 ` [PULL 15/53] iotests.py: Assume a couple of variables as given Max Reitz
2021-01-26 14:19 ` [PULL 16/53] iotests/297: Rewrite in Python and extend reach Max Reitz
2021-01-26 14:19 ` [PULL 17/53] iotests: Move try_remove to iotests.py Max Reitz
2021-01-26 14:19 ` [PULL 18/53] iotests/129: Remove test images in tearDown() Max Reitz
2021-01-26 14:19 ` [PULL 19/53] iotests/129: Do not check @busy Max Reitz
2021-01-26 14:19 ` [PULL 20/53] iotests/129: Use throttle node Max Reitz
2021-01-26 14:19 ` [PULL 21/53] iotests/129: Actually test a commit job Max Reitz
2021-01-26 14:19 ` [PULL 22/53] iotests/129: Limit mirror job's buffer size Max Reitz
2021-01-26 14:19 ` [PULL 23/53] iotests/129: Clean up pylint and mypy complaints Max Reitz
2021-01-26 14:19 ` [PULL 24/53] iotests/300: " Max Reitz
2021-01-26 14:19 ` [PULL 25/53] coroutine-sigaltstack: Add SIGUSR2 mutex Max Reitz
2021-01-26 14:19 ` [PULL 26/53] qapi: backup: add perf.use-copy-range parameter Max Reitz
2021-01-26 14:19 ` [PULL 27/53] block/block-copy: More explicit call_state Max Reitz
2021-01-26 14:19 ` [PULL 28/53] block/block-copy: implement block_copy_async Max Reitz
2021-01-26 14:19 ` [PULL 29/53] block/block-copy: add max_chunk and max_workers parameters Max Reitz
2021-01-26 14:19 ` [PULL 30/53] block/block-copy: add list of all call-states Max Reitz
2021-01-26 14:19 ` [PULL 31/53] block/block-copy: add ratelimit to block-copy Max Reitz
2021-01-26 14:19 ` Max Reitz [this message]
2021-01-26 14:19 ` [PULL 33/53] blockjob: add set_speed to BlockJobDriver Max Reitz
2021-01-26 14:19 ` [PULL 34/53] job: call job_enter from job_pause Max Reitz
2021-01-26 14:19 ` [PULL 35/53] qapi: backup: add max-chunk and max-workers to x-perf struct Max Reitz
2021-01-26 14:19 ` [PULL 36/53] iotests: 56: prepare for backup over block-copy Max Reitz
2021-01-26 14:20 ` [PULL 37/53] iotests/129: Limit backup's max-chunk/max-workers Max Reitz
2021-01-26 14:20 ` [PULL 38/53] iotests: 185: prepare for backup over block-copy Max Reitz
2021-01-26 14:20 ` [PULL 39/53] iotests: 219: " Max Reitz
2021-01-26 14:20 ` [PULL 40/53] iotests: 257: " Max Reitz
2021-01-26 14:20 ` [PULL 41/53] block/block-copy: make progress_bytes_callback optional Max Reitz
2021-01-26 14:20 ` [PULL 42/53] block/backup: drop extra gotos from backup_run() Max Reitz
2021-01-26 14:20 ` [PULL 43/53] backup: move to block-copy Max Reitz
2021-01-26 14:20 ` [PULL 44/53] qapi: backup: disable copy_range by default Max Reitz
2021-01-26 14:20 ` [PULL 45/53] block/block-copy: drop unused block_copy_set_progress_callback() Max Reitz
2021-01-26 14:20 ` [PULL 46/53] block/block-copy: drop unused argument of block_copy() Max Reitz
2021-01-26 14:20 ` [PULL 47/53] simplebench/bench_block_job: use correct shebang line with python3 Max Reitz
2021-01-26 14:20 ` [PULL 48/53] simplebench: bench_block_job: add cmd_options argument Max Reitz
2021-01-26 14:20 ` [PULL 49/53] simplebench: add bench-backup.py Max Reitz
2021-01-26 14:20 ` [PULL 50/53] block: report errno when flock fcntl fails Max Reitz
2021-01-26 14:20 ` [PULL 51/53] iotests: Add test for the regression fixed in c8bf9a9169 Max Reitz
2021-01-26 14:20 ` [PULL 52/53] iotests/118: Drop 'change' test Max Reitz
2021-01-26 14:20 ` [PULL 53/53] iotests/178: Pass value to invalid option Max Reitz
2021-01-27 17:40 ` [PULL 00/53] Block patches Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210126142016.806073-33-mreitz@redhat.com \
--to=mreitz@redhat.com \
--cc=kwolf@redhat.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-block@nongnu.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).