From: David Gibson <david@gibson.dropbear.id.au>
To: "Cédric Le Goater" <clg@kaod.org>
Cc: qemu-devel@nongnu.org, qemu-ppc@nongnu.org,
Greg Kurz <groug@kaod.org>, Joel Stanley <joel@jms.id.au>
Subject: Re: [PATCH v2] ppc/pnv: Set default RAM size to 1 GB
Date: Mon, 1 Feb 2021 14:59:33 +1100 [thread overview]
Message-ID: <20210201035933.GA2251@yekko.fritz.box> (raw)
In-Reply-To: <20210129111719.790692-1-clg@kaod.org>
[-- Attachment #1: Type: text/plain, Size: 3228 bytes --]
On Fri, Jan 29, 2021 at 12:17:19PM +0100, Cédric Le Goater wrote:
65;6201;1c> The memory layout of the PowerNV machine is defined as :
>
> #define KERNEL_LOAD_BASE ((void *)0x20000000)
> #define KERNEL_LOAD_SIZE 0x08000000
>
> #define INITRAMFS_LOAD_BASE KERNEL_LOAD_BASE + KERNEL_LOAD_SIZE
> #define INITRAMFS_LOAD_SIZE 0x08000000
>
> #define SKIBOOT_BASE 0x30000000
> #define SKIBOOT_SIZE 0x01c10000
>
> #define CPU_STACKS_BASE (SKIBOOT_BASE + SKIBOOT_SIZE)
> #define STACK_SHIFT 15
> #define STACK_SIZE (1 << STACK_SHIFT)
>
> The overall size of the CPU stacks is (max PIR + 1) * 32K and the
> machine easily reaches 800MB of minimum required RAM.
>
> Any value below will result in a skiboot crash :
>
> [ 0.034949905,3] MEM: Partial overlap detected between regions:
> [ 0.034959039,3] MEM: ibm,firmware-stacks [0x31c10000-0x3a450000] (new)
> [ 0.034968576,3] MEM: ibm,firmware-allocs-memory@0 [0x31c10000-0x38400000]
> [ 0.034980367,3] Out of memory adding skiboot reserved areas
> [ 0.035074945,3] ***********************************************
> [ 0.035093627,3] < assert failed at core/mem_region.c:1129 >
> [ 0.035104247,3] .
> [ 0.035108025,3] .
> [ 0.035111651,3] .
> [ 0.035115231,3] OO__)
> [ 0.035119198,3] <"__/
> [ 0.035122980,3] ^ ^
>
> Signed-off-by: Cédric Le Goater <clg@kaod.org>
Applied to ppc-for-6.0, thanks.
> ---
> hw/ppc/pnv.c | 10 +++++++---
> 1 file changed, 7 insertions(+), 3 deletions(-)
>
> diff --git a/hw/ppc/pnv.c b/hw/ppc/pnv.c
> index 50810df83815..77af846cdfea 100644
> --- a/hw/ppc/pnv.c
> +++ b/hw/ppc/pnv.c
> @@ -21,6 +21,7 @@
> #include "qemu-common.h"
> #include "qemu/datadir.h"
> #include "qemu/units.h"
> +#include "qemu/cutils.h"
> #include "qapi/error.h"
> #include "sysemu/qtest.h"
> #include "sysemu/sysemu.h"
> @@ -725,8 +726,11 @@ static void pnv_init(MachineState *machine)
> DeviceState *dev;
>
> /* allocate RAM */
> - if (machine->ram_size < (1 * GiB)) {
> - warn_report("skiboot may not work with < 1GB of RAM");
> + if (machine->ram_size < mc->default_ram_size) {
> + char *sz = size_to_str(mc->default_ram_size);
> + error_report("Invalid RAM size, should be bigger than %s", sz);
> + g_free(sz);
> + exit(EXIT_FAILURE);
> }
> memory_region_add_subregion(get_system_memory(), 0, machine->ram);
>
> @@ -1994,7 +1998,7 @@ static void pnv_machine_class_init(ObjectClass *oc, void *data)
> * RAM defaults to less than 2048 for 32-bit hosts, and large
> * enough to fit the maximum initrd size at it's load address
> */
> - mc->default_ram_size = INITRD_LOAD_ADDR + INITRD_MAX_SIZE;
> + mc->default_ram_size = 1 * GiB;
> mc->default_ram_id = "pnv.ram";
> ispc->print_info = pnv_pic_print_info;
> nc->nmi_monitor_handler = pnv_nmi;
--
David Gibson | I'll have my music baroque, and my code
david AT gibson.dropbear.id.au | minimalist, thank you. NOT _the_ _other_
| _way_ _around_!
http://www.ozlabs.org/~dgibson
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
prev parent reply other threads:[~2021-02-01 4:02 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-01-29 11:17 [PATCH v2] ppc/pnv: Set default RAM size to 1 GB Cédric Le Goater
2021-01-29 11:41 ` Greg Kurz
2021-01-29 12:17 ` Cédric Le Goater
2021-01-29 13:56 ` Philippe Mathieu-Daudé
2021-02-01 3:59 ` David Gibson [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210201035933.GA2251@yekko.fritz.box \
--to=david@gibson.dropbear.id.au \
--cc=clg@kaod.org \
--cc=groug@kaod.org \
--cc=joel@jms.id.au \
--cc=qemu-devel@nongnu.org \
--cc=qemu-ppc@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).