From: Eric Blake <eblake@redhat.com>
To: qemu-devel@nongnu.org
Cc: Fam Zheng <fam@euphon.net>, Kevin Wolf <kwolf@redhat.com>,
Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>,
"open list:Block I/O path" <qemu-block@nongnu.org>,
Max Reitz <mreitz@redhat.com>,
Stefan Hajnoczi <stefanha@redhat.com>
Subject: [PULL 14/20] block/io: support int64_t bytes in bdrv_aligned_preadv()
Date: Tue, 2 Feb 2021 16:45:23 -0600 [thread overview]
Message-ID: <20210202224529.642055-15-eblake@redhat.com> (raw)
In-Reply-To: <20210202224529.642055-1-eblake@redhat.com>
From: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
We are generally moving to int64_t for both offset and bytes parameters
on all io paths.
Main motivation is realization of 64-bit write_zeroes operation for
fast zeroing large disk chunks, up to the whole disk.
We chose signed type, to be consistent with off_t (which is signed) and
with possibility for signed return type (where negative value means
error).
So, prepare bdrv_aligned_preadv() now.
Make the bytes variable in bdrv_padding_rmw_read() int64_t, as it is
only used for pass-through to bdrv_aligned_preadv().
All bdrv_aligned_preadv() callers are safe as type is widening. Let's
look inside:
- add a new-style assertion that request is good.
- callees bdrv_is_allocated(), bdrv_co_do_copy_on_readv() supports
int64_t bytes
- conversion of bytes_remaining is OK, as we never have requests
overflowing BDRV_MAX_LENGTH
- looping through bytes_remaining is ok, num is updated to int64_t
- for bdrv_driver_preadv we have same limit of max_transfer
- qemu_iovec_memset is OK, as bytes+qiov_offset should not overflow
qiov->size anyway (thanks to bdrv_check_qiov_request())
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201211183934.169161-14-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: grammar tweak]
Signed-off-by: Eric Blake <eblake@redhat.com>
---
block/io.c | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)
diff --git a/block/io.c b/block/io.c
index 63b0fa0e9ed7..cef284e3a189 100644
--- a/block/io.c
+++ b/block/io.c
@@ -1475,15 +1475,16 @@ err:
* reads; any other features must be implemented by the caller.
*/
static int coroutine_fn bdrv_aligned_preadv(BdrvChild *child,
- BdrvTrackedRequest *req, int64_t offset, unsigned int bytes,
+ BdrvTrackedRequest *req, int64_t offset, int64_t bytes,
int64_t align, QEMUIOVector *qiov, size_t qiov_offset, int flags)
{
BlockDriverState *bs = child->bs;
int64_t total_bytes, max_bytes;
int ret = 0;
- uint64_t bytes_remaining = bytes;
+ int64_t bytes_remaining = bytes;
int max_transfer;
+ bdrv_check_qiov_request(offset, bytes, qiov, qiov_offset, &error_abort);
assert(is_power_of_2(align));
assert((offset & (align - 1)) == 0);
assert((bytes & (align - 1)) == 0);
@@ -1545,7 +1546,7 @@ static int coroutine_fn bdrv_aligned_preadv(BdrvChild *child,
}
while (bytes_remaining) {
- int num;
+ int64_t num;
if (max_bytes) {
num = MIN(bytes_remaining, MIN(max_bytes, max_transfer));
@@ -1652,7 +1653,7 @@ static int bdrv_padding_rmw_read(BdrvChild *child,
assert(req->serialising && pad->buf);
if (pad->head || pad->merge_reads) {
- uint64_t bytes = pad->merge_reads ? pad->buf_len : align;
+ int64_t bytes = pad->merge_reads ? pad->buf_len : align;
qemu_iovec_init_buf(&local_qiov, pad->buf, bytes);
--
2.30.0
next prev parent reply other threads:[~2021-02-02 22:53 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-02-02 22:45 [PULL 00/20] NBD patches for 2021-02-02 Eric Blake
2021-02-02 22:45 ` [PULL 01/20] iotests: Fix expected whitespace for 185 Eric Blake
2021-02-02 22:45 ` [PULL 02/20] block: refactor bdrv_check_request: add errp Eric Blake
2021-02-02 22:45 ` [PULL 03/20] util/iov: make qemu_iovec_init_extended() honest Eric Blake
2021-02-02 22:45 ` [PULL 04/20] block: fix theoretical overflow in bdrv_init_padding() Eric Blake
2021-02-02 22:45 ` [PULL 05/20] block/io: refactor bdrv_pad_request(): move bdrv_pad_request() up Eric Blake
2021-02-02 22:45 ` [PULL 06/20] block/io: bdrv_pad_request(): support qemu_iovec_init_extended failure Eric Blake
2021-02-02 22:45 ` [PULL 07/20] block/throttle-groups: throttle_group_co_io_limits_intercept(): 64bit bytes Eric Blake
2021-02-02 22:45 ` [PULL 08/20] block/io: improve bdrv_check_request: check qiov too Eric Blake
2021-02-02 22:45 ` [PULL 09/20] block: use int64_t as bytes type in tracked requests Eric Blake
2021-02-02 22:45 ` [PULL 10/20] block/io: use int64_t bytes in driver wrappers Eric Blake
2021-02-02 22:45 ` [PULL 11/20] block/io: support int64_t bytes in bdrv_co_do_pwrite_zeroes() Eric Blake
2021-02-02 22:45 ` [PULL 12/20] block/io: support int64_t bytes in bdrv_aligned_pwritev() Eric Blake
2021-02-02 22:45 ` [PULL 13/20] block/io: support int64_t bytes in bdrv_co_do_copy_on_readv() Eric Blake
2021-02-02 22:45 ` Eric Blake [this message]
2021-02-02 22:45 ` [PULL 15/20] block/io: support int64_t bytes in bdrv_co_p{read, write}v_part() Eric Blake
2021-02-02 22:45 ` [PULL 16/20] block/io: support int64_t bytes in read/write wrappers Eric Blake
2021-02-02 22:45 ` [PULL 17/20] block/io: use int64_t bytes in copy_range Eric Blake
2021-02-02 22:45 ` [PULL 18/20] block/nbd: only detach existing iochannel from aio_context Eric Blake
2021-02-02 22:45 ` [PULL 19/20] block/nbd: only enter connection coroutine if it's present Eric Blake
2021-02-02 22:45 ` [PULL 20/20] nbd: make nbd_read* return -EIO on error Eric Blake
2021-02-02 23:12 ` [PULL 00/20] NBD patches for 2021-02-02 no-reply
2021-02-03 13:25 ` Eric Blake
2021-02-03 13:27 ` Eric Blake
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210202224529.642055-15-eblake@redhat.com \
--to=eblake@redhat.com \
--cc=fam@euphon.net \
--cc=kwolf@redhat.com \
--cc=mreitz@redhat.com \
--cc=qemu-block@nongnu.org \
--cc=qemu-devel@nongnu.org \
--cc=stefanha@redhat.com \
--cc=vsementsov@virtuozzo.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).