From: Richard Henderson <richard.henderson@linaro.org>
To: qemu-devel@nongnu.org
Cc: peter.maydell@linaro.org, qemu-arm@nongnu.org
Subject: [PATCH v5 00/31] target-arm: Implement ARMv8.5-MemTag, user mode
Date: Wed, 3 Feb 2021 08:59:39 -1000 [thread overview]
Message-ID: <20210203190010.759771-1-richard.henderson@linaro.org> (raw)
The kernel abi was finally merged into 5.10.
Changes for v5:
* Actually include the revamp for TARGET_TAGGED_ADDRESSES,
which got lost at some point before posting v4.
Patches lacking review are only the new ones:
0011-exec-Introduce-cpu_untagged_addr.patch
0012-exec-Use-cpu_untagged_addr-in-g2h-split-out-g2h_u.patch
0013-linux-user-Explicitly-untag-memory-management-sys.patch
0014-linux-user-Use-guest_range_valid-in-access_ok.patch
0015-exec-Rename-guest_-addr-range-_valid-to-_untagged.patch
0016-linux-user-Use-cpu_untagged_addr-in-access_ok-spl.patch
0017-linux-user-Move-lock_user-et-al-out-of-line.patch
0018-linux-user-Fix-types-in-uaccess.c.patch
0019-linux-user-Handle-tags-in-lock_user-unlock_user.patch
Changes for v4:
* Revamp "Add support for TARGET_TAGGED_ADDRESSES". There are now two
sets of functions in include/exec/, one for tagged and one for
untagged addresses. The former takes a CPUState, and does not
assume current_cpu is a thing. So much for the generic bits...
However, use of current_cpu remains, pushed down to lock_user.
Changing everything that touches that, or get/put_user, is daunting.
* Fix tbi0 vs tbi1 for linux-user.
This had a number of cascading effects.
* Adjust when async errors are noticed.
Changes for v3:
* Split out type changes to separate patches.
* Add doc comments; tweak alloc so that the !PAGE_VALID case is clear.
* Do not overlap PAGE_TARGET_2 with PAGE_RESERVED.
* Use syndrome.h, arm_deliver_fault.
r~
Richard Henderson (31):
tcg: Introduce target-specific page data for user-only
linux-user: Introduce PAGE_ANON
exec: Use uintptr_t for guest_base
exec: Use uintptr_t in cpu_ldst.h
exec: Improve types for guest_addr_valid
linux-user: Check for overflow in access_ok
linux-user: Tidy VERIFY_READ/VERIFY_WRITE
bsd-user: Tidy VERIFY_READ/VERIFY_WRITE
linux-user: Do not use guest_addr_valid for h2g_valid
linux-user: Fix guest_addr_valid vs reserved_va
exec: Introduce cpu_untagged_addr
exec: Use cpu_untagged_addr in g2h; split out g2h_untagged
linux-user: Explicitly untag memory management syscalls
linux-user: Use guest_range_valid in access_ok
exec: Rename guest_{addr,range}_valid to *_untagged
linux-user: Use cpu_untagged_addr in access_ok; split out *_untagged
linux-user: Move lock_user et al out of line
linux-user: Fix types in uaccess.c
linux-user: Handle tags in lock_user/unlock_user
linux-user/aarch64: Implement PR_TAGGED_ADDR_ENABLE
target/arm: Improve gen_top_byte_ignore
target/arm: Use the proper TBI settings for linux-user
linux-user/aarch64: Implement PR_MTE_TCF and PR_MTE_TAG
linux-user/aarch64: Implement PROT_MTE
target/arm: Split out syndrome.h from internals.h
linux-user/aarch64: Pass syndrome to EXC_*_ABORT
linux-user/aarch64: Signal SEGV_MTESERR for sync tag check fault
linux-user/aarch64: Signal SEGV_MTEAERR for async tag check error
target/arm: Add allocation tag storage for user mode
target/arm: Enable MTE for user-only
tests/tcg/aarch64: Add mte smoke tests
bsd-user/qemu.h | 9 +-
include/exec/cpu-all.h | 47 ++++-
include/exec/cpu_ldst.h | 39 ++--
include/exec/exec-all.h | 2 +-
linux-user/aarch64/target_signal.h | 3 +
linux-user/aarch64/target_syscall.h | 13 ++
linux-user/qemu.h | 76 +++-----
linux-user/syscall_defs.h | 1 +
target/arm/cpu-param.h | 3 +
target/arm/cpu.h | 32 ++++
target/arm/internals.h | 249 +------------------------
target/arm/syndrome.h | 273 ++++++++++++++++++++++++++++
tests/tcg/aarch64/mte.h | 60 ++++++
accel/tcg/translate-all.c | 32 +++-
accel/tcg/user-exec.c | 57 +++---
bsd-user/main.c | 4 +-
linux-user/aarch64/cpu_loop.c | 38 +++-
linux-user/elfload.c | 18 +-
linux-user/flatload.c | 2 +-
linux-user/hppa/cpu_loop.c | 39 ++--
linux-user/i386/cpu_loop.c | 6 +-
linux-user/i386/signal.c | 5 +-
linux-user/main.c | 4 +-
linux-user/mmap.c | 86 +++++----
linux-user/ppc/signal.c | 4 +-
linux-user/syscall.c | 165 +++++++++++++----
linux-user/uaccess.c | 82 +++++++--
target/arm/cpu.c | 25 ++-
target/arm/helper-a64.c | 4 +-
target/arm/mte_helper.c | 39 +++-
target/arm/tlb_helper.c | 15 +-
target/arm/translate-a64.c | 25 +--
target/hppa/op_helper.c | 2 +-
target/i386/tcg/mem_helper.c | 2 +-
target/s390x/mem_helper.c | 4 +-
tests/tcg/aarch64/mte-1.c | 28 +++
tests/tcg/aarch64/mte-2.c | 45 +++++
tests/tcg/aarch64/mte-3.c | 51 ++++++
tests/tcg/aarch64/mte-4.c | 45 +++++
tests/tcg/aarch64/pauth-2.c | 1 -
tests/tcg/aarch64/Makefile.target | 6 +
tests/tcg/configure.sh | 4 +
42 files changed, 1126 insertions(+), 519 deletions(-)
create mode 100644 target/arm/syndrome.h
create mode 100644 tests/tcg/aarch64/mte.h
create mode 100644 tests/tcg/aarch64/mte-1.c
create mode 100644 tests/tcg/aarch64/mte-2.c
create mode 100644 tests/tcg/aarch64/mte-3.c
create mode 100644 tests/tcg/aarch64/mte-4.c
--
2.25.1
next reply other threads:[~2021-02-03 19:03 UTC|newest]
Thread overview: 47+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-02-03 18:59 Richard Henderson [this message]
2021-02-03 18:59 ` [PATCH v5 01/31] tcg: Introduce target-specific page data for user-only Richard Henderson
2021-02-03 18:59 ` [PATCH v5 02/31] linux-user: Introduce PAGE_ANON Richard Henderson
2021-02-03 18:59 ` [PATCH v5 03/31] exec: Use uintptr_t for guest_base Richard Henderson
2021-02-03 19:08 ` Philippe Mathieu-Daudé
2021-02-03 19:10 ` Richard Henderson
2021-02-03 19:20 ` Philippe Mathieu-Daudé
2021-02-03 18:59 ` [PATCH v5 04/31] exec: Use uintptr_t in cpu_ldst.h Richard Henderson
2021-02-03 18:59 ` [PATCH v5 05/31] exec: Improve types for guest_addr_valid Richard Henderson
2021-02-03 18:59 ` [PATCH v5 06/31] linux-user: Check for overflow in access_ok Richard Henderson
2021-02-03 18:59 ` [PATCH v5 07/31] linux-user: Tidy VERIFY_READ/VERIFY_WRITE Richard Henderson
2021-02-03 18:59 ` [PATCH v5 08/31] bsd-user: " Richard Henderson
2021-02-03 18:59 ` [PATCH v5 09/31] linux-user: Do not use guest_addr_valid for h2g_valid Richard Henderson
2021-02-03 18:59 ` [PATCH v5 10/31] linux-user: Fix guest_addr_valid vs reserved_va Richard Henderson
2021-02-03 18:59 ` [PATCH v5 11/31] exec: Introduce cpu_untagged_addr Richard Henderson
2021-02-08 13:34 ` Peter Maydell
2021-02-03 18:59 ` [PATCH v5 12/31] exec: Use cpu_untagged_addr in g2h; split out g2h_untagged Richard Henderson
2021-02-08 13:39 ` Peter Maydell
2021-02-03 18:59 ` [PATCH v5 13/31] linux-user: Explicitly untag memory management syscalls Richard Henderson
2021-02-08 14:10 ` Peter Maydell
2021-02-08 16:33 ` Peter Maydell
2021-02-03 18:59 ` [PATCH v5 14/31] linux-user: Use guest_range_valid in access_ok Richard Henderson
2021-02-08 13:47 ` Peter Maydell
2021-02-03 18:59 ` [PATCH v5 15/31] exec: Rename guest_{addr,range}_valid to *_untagged Richard Henderson
2021-02-08 13:48 ` [PATCH v5 15/31] exec: Rename guest_{addr, range}_valid " Peter Maydell
2021-02-03 18:59 ` [PATCH v5 16/31] linux-user: Use cpu_untagged_addr in access_ok; split out *_untagged Richard Henderson
2021-02-08 13:50 ` Peter Maydell
2021-02-03 18:59 ` [PATCH v5 17/31] linux-user: Move lock_user et al out of line Richard Henderson
2021-02-08 13:50 ` Peter Maydell
2021-02-03 18:59 ` [PATCH v5 18/31] linux-user: Fix types in uaccess.c Richard Henderson
2021-02-08 13:53 ` Peter Maydell
2021-02-03 18:59 ` [PATCH v5 19/31] linux-user: Handle tags in lock_user/unlock_user Richard Henderson
2021-02-08 13:57 ` Peter Maydell
2021-02-08 17:32 ` Richard Henderson
2021-02-03 18:59 ` [PATCH v5 20/31] linux-user/aarch64: Implement PR_TAGGED_ADDR_ENABLE Richard Henderson
2021-02-03 19:00 ` [PATCH v5 21/31] target/arm: Improve gen_top_byte_ignore Richard Henderson
2021-02-03 19:00 ` [PATCH v5 22/31] target/arm: Use the proper TBI settings for linux-user Richard Henderson
2021-02-03 19:00 ` [PATCH v5 23/31] linux-user/aarch64: Implement PR_MTE_TCF and PR_MTE_TAG Richard Henderson
2021-02-03 19:00 ` [PATCH v5 24/31] linux-user/aarch64: Implement PROT_MTE Richard Henderson
2021-02-03 19:00 ` [PATCH v5 25/31] target/arm: Split out syndrome.h from internals.h Richard Henderson
2021-02-03 19:00 ` [PATCH v5 26/31] linux-user/aarch64: Pass syndrome to EXC_*_ABORT Richard Henderson
2021-02-03 19:00 ` [PATCH v5 27/31] linux-user/aarch64: Signal SEGV_MTESERR for sync tag check fault Richard Henderson
2021-02-03 19:00 ` [PATCH v5 28/31] linux-user/aarch64: Signal SEGV_MTEAERR for async tag check error Richard Henderson
2021-02-03 19:00 ` [PATCH v5 29/31] target/arm: Add allocation tag storage for user mode Richard Henderson
2021-02-03 19:00 ` [PATCH v5 30/31] target/arm: Enable MTE for user-only Richard Henderson
2021-02-03 19:00 ` [PATCH v5 31/31] tests/tcg/aarch64: Add mte smoke tests Richard Henderson
2021-02-03 19:57 ` [PATCH v5 00/31] target-arm: Implement ARMv8.5-MemTag, user mode no-reply
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210203190010.759771-1-richard.henderson@linaro.org \
--to=richard.henderson@linaro.org \
--cc=peter.maydell@linaro.org \
--cc=qemu-arm@nongnu.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).