qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Richard Henderson <richard.henderson@linaro.org>
To: qemu-devel@nongnu.org
Cc: sw@weilnetz.de
Subject: [PATCH v3 01/70] gdbstub: Fix handle_query_xfer_auxv
Date: Sun,  7 Feb 2021 18:36:43 -0800	[thread overview]
Message-ID: <20210208023752.270606-2-richard.henderson@linaro.org> (raw)
In-Reply-To: <20210208023752.270606-1-richard.henderson@linaro.org>

The main problem was that we were treating a guest address
as a host address with a mere cast.

Use the correct interface for accessing guest memory.  Do not
allow offset == auxv_len, which would result in an empty packet.

Fixes: 51c623b0de1 ("gdbstub: add support to Xfer:auxv:read: packet")
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
 gdbstub.c | 17 ++++++++++++-----
 1 file changed, 12 insertions(+), 5 deletions(-)

diff --git a/gdbstub.c b/gdbstub.c
index c7ca7e9f88..759bb00bcf 100644
--- a/gdbstub.c
+++ b/gdbstub.c
@@ -2245,7 +2245,6 @@ static void handle_query_xfer_auxv(GdbCmdContext *gdb_ctx, void *user_ctx)
 {
     TaskState *ts;
     unsigned long offset, len, saved_auxv, auxv_len;
-    const char *mem;
 
     if (gdb_ctx->num_params < 2) {
         put_packet("E22");
@@ -2257,8 +2256,8 @@ static void handle_query_xfer_auxv(GdbCmdContext *gdb_ctx, void *user_ctx)
     ts = gdbserver_state.c_cpu->opaque;
     saved_auxv = ts->info->saved_auxv;
     auxv_len = ts->info->auxv_len;
-    mem = (const char *)(saved_auxv + offset);
-    if (offset > auxv_len) {
+
+    if (offset >= auxv_len) {
         put_packet("E00");
         return;
     }
@@ -2269,12 +2268,20 @@ static void handle_query_xfer_auxv(GdbCmdContext *gdb_ctx, void *user_ctx)
 
     if (len < auxv_len - offset) {
         g_string_assign(gdbserver_state.str_buf, "m");
-        memtox(gdbserver_state.str_buf, mem, len);
     } else {
         g_string_assign(gdbserver_state.str_buf, "l");
-        memtox(gdbserver_state.str_buf, mem, auxv_len - offset);
+        len = auxv_len - offset;
     }
 
+    g_byte_array_set_size(gdbserver_state.mem_buf, len);
+    if (target_memory_rw_debug(gdbserver_state.g_cpu, saved_auxv + offset,
+                               gdbserver_state.mem_buf->data, len, false)) {
+        put_packet("E14");
+        return;
+    }
+
+    memtox(gdbserver_state.str_buf,
+           (const char *)gdbserver_state.mem_buf->data, len);
     put_packet_binary(gdbserver_state.str_buf->str,
                       gdbserver_state.str_buf->len, true);
 }
-- 
2.25.1



  reply	other threads:[~2021-02-08  2:39 UTC|newest]

Thread overview: 81+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-02-08  2:36 [PATCH v3 00/70] TCI fixes and cleanups Richard Henderson
2021-02-08  2:36 ` Richard Henderson [this message]
2021-02-08  2:36 ` [PATCH v3 02/70] tcg: Split out tcg_raise_tb_overflow Richard Henderson
2021-03-05 14:48   ` Alex Bennée
2021-02-08  2:36 ` [PATCH v3 03/70] tcg: Manage splitwx in tc_ptr_to_region_tree by hand Richard Henderson
2021-03-05 15:28   ` Alex Bennée
2021-02-08  2:36 ` [PATCH v3 04/70] tcg/tci: Merge identical cases in generation Richard Henderson
2021-03-05 16:29   ` Alex Bennée
2021-02-08  2:36 ` [PATCH v3 05/70] tcg/tci: Remove tci_read_r8 Richard Henderson
2021-03-05 16:34   ` Alex Bennée
2021-02-08  2:36 ` [PATCH v3 06/70] tcg/tci: Remove tci_read_r8s Richard Henderson
2021-02-08  2:36 ` [PATCH v3 07/70] tcg/tci: Remove tci_read_r16 Richard Henderson
2021-02-08  2:36 ` [PATCH v3 08/70] tcg/tci: Remove tci_read_r16s Richard Henderson
2021-02-08  2:36 ` [PATCH v3 09/70] tcg/tci: Remove tci_read_r32 Richard Henderson
2021-02-08  2:36 ` [PATCH v3 10/70] tcg/tci: Remove tci_read_r32s Richard Henderson
2021-02-08  2:36 ` [PATCH v3 11/70] tcg/tci: Reduce use of tci_read_r64 Richard Henderson
2021-02-08  2:36 ` [PATCH v3 12/70] tcg/tci: Merge basic arithmetic operations Richard Henderson
2021-02-08  2:36 ` [PATCH v3 13/70] tcg/tci: Merge extension operations Richard Henderson
2021-02-08  2:36 ` [PATCH v3 14/70] tcg/tci: Remove ifdefs for TCG_TARGET_HAS_ext32[us]_i64 Richard Henderson
2021-02-08  2:36 ` [PATCH v3 15/70] tcg/tci: Merge bswap operations Richard Henderson
2021-02-08  2:36 ` [PATCH v3 16/70] tcg/tci: Merge mov, not and neg operations Richard Henderson
2021-02-08  2:36 ` [PATCH v3 17/70] tcg/tci: Rename tci_read_r to tci_read_rval Richard Henderson
2021-02-08  2:37 ` [PATCH v3 18/70] tcg/tci: Split out tci_args_rrs Richard Henderson
2021-02-08  2:37 ` [PATCH v3 19/70] tcg/tci: Split out tci_args_rr Richard Henderson
2021-02-08  2:37 ` [PATCH v3 20/70] tcg/tci: Split out tci_args_rrr Richard Henderson
2021-02-08  2:37 ` [PATCH v3 21/70] tcg/tci: Split out tci_args_rrrc Richard Henderson
2021-02-08  2:37 ` [PATCH v3 22/70] tcg/tci: Split out tci_args_l Richard Henderson
2021-02-08  2:37 ` [PATCH v3 23/70] tcg/tci: Split out tci_args_rrrrrc Richard Henderson
2021-02-08  2:37 ` [PATCH v3 24/70] tcg/tci: Split out tci_args_rrcl and tci_args_rrrrcl Richard Henderson
2021-02-08  2:37 ` [PATCH v3 25/70] tcg/tci: Split out tci_args_ri and tci_args_rI Richard Henderson
2021-02-08  2:37 ` [PATCH v3 26/70] tcg/tci: Reuse tci_args_l for calls Richard Henderson
2021-02-08  2:37 ` [PATCH v3 27/70] tcg/tci: Reuse tci_args_l for exit_tb Richard Henderson
2021-02-08  2:37 ` [PATCH v3 28/70] tcg/tci: Reuse tci_args_l for goto_tb Richard Henderson
2021-02-08  2:37 ` [PATCH v3 29/70] tcg/tci: Split out tci_args_rrrrrr Richard Henderson
2021-02-08  2:37 ` [PATCH v3 30/70] tcg/tci: Split out tci_args_rrrr Richard Henderson
2021-02-08  2:37 ` [PATCH v3 31/70] tcg/tci: Clean up deposit operations Richard Henderson
2021-02-08  2:37 ` [PATCH v3 32/70] tcg/tci: Reduce qemu_ld/st TCGMemOpIdx operand to 32-bits Richard Henderson
2021-02-08  2:37 ` [PATCH v3 33/70] tcg/tci: Split out tci_args_{rrm,rrrm,rrrrm} Richard Henderson
2021-02-08  2:37 ` [PATCH v3 34/70] tcg/tci: Hoist op_size checking into tci_args_* Richard Henderson
2021-02-08  2:37 ` [PATCH v3 35/70] tcg/tci: Remove tci_disas Richard Henderson
2021-02-08  2:37 ` [PATCH v3 36/70] tcg/tci: Implement the disassembler properly Richard Henderson
2021-02-08  2:37 ` [PATCH v3 37/70] tcg: Build ffi data structures for helpers Richard Henderson
2021-02-08  2:37 ` [PATCH v3 38/70] tcg/tci: Use ffi for calls Richard Henderson
2021-02-08  2:37 ` [PATCH v3 39/70] tcg/tci: Improve tcg_target_call_clobber_regs Richard Henderson
2021-02-08  2:37 ` [PATCH v3 40/70] tcg/tci: Move call-return regs to end of tcg_target_reg_alloc_order Richard Henderson
2021-02-08  2:37 ` [PATCH v3 41/70] tcg/tci: Push opcode emit into each case Richard Henderson
2021-02-08  2:37 ` [PATCH v3 42/70] tcg/tci: Split out tcg_out_op_rrs Richard Henderson
2021-02-08  2:37 ` [PATCH v3 43/70] tcg/tci: Split out tcg_out_op_l Richard Henderson
2021-02-08  2:37 ` [PATCH v3 44/70] tcg/tci: Split out tcg_out_op_p Richard Henderson
2021-02-08  2:37 ` [PATCH v3 45/70] tcg/tci: Split out tcg_out_op_rr Richard Henderson
2021-02-08  2:37 ` [PATCH v3 46/70] tcg/tci: Split out tcg_out_op_rrr Richard Henderson
2021-02-08  2:37 ` [PATCH v3 47/70] tcg/tci: Split out tcg_out_op_rrrc Richard Henderson
2021-02-08  2:37 ` [PATCH v3 48/70] tcg/tci: Split out tcg_out_op_rrrrrc Richard Henderson
2021-02-08  2:37 ` [PATCH v3 49/70] tcg/tci: Split out tcg_out_op_rrrbb Richard Henderson
2021-02-08  2:37 ` [PATCH v3 50/70] tcg/tci: Split out tcg_out_op_rrcl Richard Henderson
2021-02-08  2:37 ` [PATCH v3 51/70] tcg/tci: Split out tcg_out_op_rrrrrr Richard Henderson
2021-02-08  2:37 ` [PATCH v3 52/70] tcg/tci: Split out tcg_out_op_rrrr Richard Henderson
2021-02-08  2:37 ` [PATCH v3 53/70] tcg/tci: Split out tcg_out_op_rrrrcl Richard Henderson
2021-02-08  2:37 ` [PATCH v3 54/70] tcg/tci: Split out tcg_out_op_{rrm,rrrm,rrrrm} Richard Henderson
2021-02-08  2:37 ` [PATCH v3 55/70] tcg/tci: Split out tcg_out_op_v Richard Henderson
2021-02-08  2:37 ` [PATCH v3 56/70] tcg/tci: Split out tcg_out_op_np Richard Henderson
2021-02-08  2:37 ` [PATCH v3 57/70] tcg/tci: Split out tcg_out_op_r[iI] Richard Henderson
2021-02-08  2:37 ` [PATCH v3 58/70] tcg/tci: Reserve r13 for a temporary Richard Henderson
2021-02-08  2:37 ` [PATCH v3 59/70] tcg/tci: Emit setcond before brcond Richard Henderson
2021-02-08  2:37 ` [PATCH v3 60/70] tcg/tci: Remove tci_write_reg Richard Henderson
2021-02-08  2:37 ` [PATCH v3 61/70] tcg/tci: Change encoding to uint32_t units Richard Henderson
2021-02-08  2:37 ` [PATCH v3 62/70] tcg/tci: Implement goto_ptr Richard Henderson
2021-02-08  2:37 ` [PATCH v3 63/70] tcg/tci: Implement movcond Richard Henderson
2021-02-08  2:37 ` [PATCH v3 64/70] tcg/tci: Implement andc, orc, eqv, nand, nor Richard Henderson
2021-02-08  2:37 ` [PATCH v3 65/70] tcg/tci: Implement extract, sextract Richard Henderson
2021-02-08  2:37 ` [PATCH v3 66/70] tcg/tci: Implement clz, ctz, ctpop Richard Henderson
2021-02-08  2:37 ` [PATCH v3 67/70] tcg/tci: Implement mulu2, muls2 Richard Henderson
2021-02-08  2:37 ` [PATCH v3 68/70] tcg/tci: Implement add2, sub2 Richard Henderson
2021-02-08  2:37 ` [PATCH v3 69/70] tests/tcg: Increase timeout for TCI Richard Henderson
2021-02-08  2:37 ` [PATCH v3 70/70] gitlab: Enable cross-i386 builds of TCI Richard Henderson
2021-02-17 17:25   ` Philippe Mathieu-Daudé
2021-02-08  3:45 ` [PATCH v3 00/70] TCI fixes and cleanups no-reply
2021-03-05 16:37 ` Alex Bennée
2021-03-05 16:55   ` Philippe Mathieu-Daudé
2021-03-05 16:55   ` Alex Bennée
2021-03-05 16:59     ` Alex Bennée

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210208023752.270606-2-richard.henderson@linaro.org \
    --to=richard.henderson@linaro.org \
    --cc=qemu-devel@nongnu.org \
    --cc=sw@weilnetz.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).