qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Klaus Jensen <its@irrelevant.dk>
To: qemu-devel@nongnu.org, Peter Maydell <peter.maydell@linaro.org>
Cc: Fam Zheng <fam@euphon.net>, Kevin Wolf <kwolf@redhat.com>,
	qemu-block@nongnu.org, Dmitry Fomichev <dmitry.fomichev@wdc.com>,
	Klaus Jensen <k.jensen@samsung.com>,
	Max Reitz <mreitz@redhat.com>, Klaus Jensen <its@irrelevant.dk>,
	Stefan Hajnoczi <stefanha@redhat.com>,
	Keith Busch <kbusch@kernel.org>
Subject: [PULL 25/56] hw/block/nvme: zero out zones on reset
Date: Tue,  9 Feb 2021 08:30:30 +0100	[thread overview]
Message-ID: <20210209073101.548811-26-its@irrelevant.dk> (raw)
In-Reply-To: <20210209073101.548811-1-its@irrelevant.dk>

From: Klaus Jensen <k.jensen@samsung.com>

The zoned command set specification states that "All logical blocks in a
zone *shall* be marked as deallocated when [the zone is reset]". Since
the device guarantees 0x00 to be read from deallocated blocks we have to
issue a pwrite_zeroes since we cannot be sure that a discard will do
anything. But typically, this will be achieved with an efficient
unmap/discard operation.

Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Tested-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
---
 hw/block/nvme.c       | 150 +++++++++++++++++++++++++++++++-----------
 hw/block/trace-events |   1 +
 2 files changed, 113 insertions(+), 38 deletions(-)

diff --git a/hw/block/nvme.c b/hw/block/nvme.c
index a5cf798bbbaa..7222eff755ee 100644
--- a/hw/block/nvme.c
+++ b/hw/block/nvme.c
@@ -1371,6 +1371,53 @@ static void nvme_aio_discard_cb(void *opaque, int ret)
     nvme_enqueue_req_completion(nvme_cq(req), req);
 }
 
+struct nvme_zone_reset_ctx {
+    NvmeRequest *req;
+    NvmeZone    *zone;
+};
+
+static void nvme_aio_zone_reset_cb(void *opaque, int ret)
+{
+    struct nvme_zone_reset_ctx *ctx = opaque;
+    NvmeRequest *req = ctx->req;
+    NvmeNamespace *ns = req->ns;
+    NvmeZone *zone = ctx->zone;
+    uintptr_t *resets = (uintptr_t *)&req->opaque;
+
+    g_free(ctx);
+
+    trace_pci_nvme_aio_zone_reset_cb(nvme_cid(req), zone->d.zslba);
+
+    if (!ret) {
+        switch (nvme_get_zone_state(zone)) {
+        case NVME_ZONE_STATE_EXPLICITLY_OPEN:
+        case NVME_ZONE_STATE_IMPLICITLY_OPEN:
+            nvme_aor_dec_open(ns);
+            /* fall through */
+        case NVME_ZONE_STATE_CLOSED:
+            nvme_aor_dec_active(ns);
+            /* fall through */
+        case NVME_ZONE_STATE_FULL:
+            zone->w_ptr = zone->d.zslba;
+            zone->d.wp = zone->w_ptr;
+            nvme_assign_zone_state(ns, zone, NVME_ZONE_STATE_EMPTY);
+            /* fall through */
+        default:
+            break;
+        }
+    } else {
+        nvme_aio_err(req, ret);
+    }
+
+    (*resets)--;
+
+    if (*resets) {
+        return;
+    }
+
+    nvme_enqueue_req_completion(nvme_cq(req), req);
+}
+
 struct nvme_compare_ctx {
     QEMUIOVector iov;
     uint8_t *bounce;
@@ -1735,7 +1782,8 @@ static uint16_t nvme_get_mgmt_zone_slba_idx(NvmeNamespace *ns, NvmeCmd *c,
     return NVME_SUCCESS;
 }
 
-typedef uint16_t (*op_handler_t)(NvmeNamespace *, NvmeZone *, NvmeZoneState);
+typedef uint16_t (*op_handler_t)(NvmeNamespace *, NvmeZone *, NvmeZoneState,
+                                 NvmeRequest *);
 
 enum NvmeZoneProcessingMask {
     NVME_PROC_CURRENT_ZONE    = 0,
@@ -1746,7 +1794,7 @@ enum NvmeZoneProcessingMask {
 };
 
 static uint16_t nvme_open_zone(NvmeNamespace *ns, NvmeZone *zone,
-                               NvmeZoneState state)
+                               NvmeZoneState state, NvmeRequest *req)
 {
     uint16_t status;
 
@@ -1779,7 +1827,7 @@ static uint16_t nvme_open_zone(NvmeNamespace *ns, NvmeZone *zone,
 }
 
 static uint16_t nvme_close_zone(NvmeNamespace *ns, NvmeZone *zone,
-                                NvmeZoneState state)
+                                NvmeZoneState state, NvmeRequest *req)
 {
     switch (state) {
     case NVME_ZONE_STATE_EXPLICITLY_OPEN:
@@ -1795,7 +1843,7 @@ static uint16_t nvme_close_zone(NvmeNamespace *ns, NvmeZone *zone,
 }
 
 static uint16_t nvme_finish_zone(NvmeNamespace *ns, NvmeZone *zone,
-                                 NvmeZoneState state)
+                                 NvmeZoneState state, NvmeRequest *req)
 {
     switch (state) {
     case NVME_ZONE_STATE_EXPLICITLY_OPEN:
@@ -1818,30 +1866,42 @@ static uint16_t nvme_finish_zone(NvmeNamespace *ns, NvmeZone *zone,
 }
 
 static uint16_t nvme_reset_zone(NvmeNamespace *ns, NvmeZone *zone,
-                                NvmeZoneState state)
+                                NvmeZoneState state, NvmeRequest *req)
 {
+    uintptr_t *resets = (uintptr_t *)&req->opaque;
+    struct nvme_zone_reset_ctx *ctx;
+
     switch (state) {
-    case NVME_ZONE_STATE_EXPLICITLY_OPEN:
-    case NVME_ZONE_STATE_IMPLICITLY_OPEN:
-        nvme_aor_dec_open(ns);
-        /* fall through */
-    case NVME_ZONE_STATE_CLOSED:
-        nvme_aor_dec_active(ns);
-        /* fall through */
-    case NVME_ZONE_STATE_FULL:
-        zone->w_ptr = zone->d.zslba;
-        zone->d.wp = zone->w_ptr;
-        nvme_assign_zone_state(ns, zone, NVME_ZONE_STATE_EMPTY);
-        /* fall through */
     case NVME_ZONE_STATE_EMPTY:
         return NVME_SUCCESS;
+    case NVME_ZONE_STATE_EXPLICITLY_OPEN:
+    case NVME_ZONE_STATE_IMPLICITLY_OPEN:
+    case NVME_ZONE_STATE_CLOSED:
+    case NVME_ZONE_STATE_FULL:
+        break;
     default:
         return NVME_ZONE_INVAL_TRANSITION;
     }
+
+    /*
+     * The zone reset aio callback needs to know the zone that is being reset
+     * in order to transition the zone on completion.
+     */
+    ctx = g_new(struct nvme_zone_reset_ctx, 1);
+    ctx->req = req;
+    ctx->zone = zone;
+
+    (*resets)++;
+
+    blk_aio_pwrite_zeroes(ns->blkconf.blk, nvme_l2b(ns, zone->d.zslba),
+                          nvme_l2b(ns, ns->zone_size), BDRV_REQ_MAY_UNMAP,
+                          nvme_aio_zone_reset_cb, ctx);
+
+    return NVME_NO_COMPLETE;
 }
 
 static uint16_t nvme_offline_zone(NvmeNamespace *ns, NvmeZone *zone,
-                                  NvmeZoneState state)
+                                  NvmeZoneState state, NvmeRequest *req)
 {
     switch (state) {
     case NVME_ZONE_STATE_READ_ONLY:
@@ -1875,7 +1935,7 @@ static uint16_t nvme_set_zd_ext(NvmeNamespace *ns, NvmeZone *zone)
 
 static uint16_t nvme_bulk_proc_zone(NvmeNamespace *ns, NvmeZone *zone,
                                     enum NvmeZoneProcessingMask proc_mask,
-                                    op_handler_t op_hndlr)
+                                    op_handler_t op_hndlr, NvmeRequest *req)
 {
     uint16_t status = NVME_SUCCESS;
     NvmeZoneState zs = nvme_get_zone_state(zone);
@@ -1900,7 +1960,7 @@ static uint16_t nvme_bulk_proc_zone(NvmeNamespace *ns, NvmeZone *zone,
     }
 
     if (proc_zone) {
-        status = op_hndlr(ns, zone, zs);
+        status = op_hndlr(ns, zone, zs, req);
     }
 
     return status;
@@ -1908,42 +1968,46 @@ static uint16_t nvme_bulk_proc_zone(NvmeNamespace *ns, NvmeZone *zone,
 
 static uint16_t nvme_do_zone_op(NvmeNamespace *ns, NvmeZone *zone,
                                 enum NvmeZoneProcessingMask proc_mask,
-                                op_handler_t op_hndlr)
+                                op_handler_t op_hndlr, NvmeRequest *req)
 {
     NvmeZone *next;
     uint16_t status = NVME_SUCCESS;
     int i;
 
     if (!proc_mask) {
-        status = op_hndlr(ns, zone, nvme_get_zone_state(zone));
+        status = op_hndlr(ns, zone, nvme_get_zone_state(zone), req);
     } else {
         if (proc_mask & NVME_PROC_CLOSED_ZONES) {
             QTAILQ_FOREACH_SAFE(zone, &ns->closed_zones, entry, next) {
-                status = nvme_bulk_proc_zone(ns, zone, proc_mask, op_hndlr);
-                if (status != NVME_SUCCESS) {
+                status = nvme_bulk_proc_zone(ns, zone, proc_mask, op_hndlr,
+                                             req);
+                if (status && status != NVME_NO_COMPLETE) {
                     goto out;
                 }
             }
         }
         if (proc_mask & NVME_PROC_OPENED_ZONES) {
             QTAILQ_FOREACH_SAFE(zone, &ns->imp_open_zones, entry, next) {
-                status = nvme_bulk_proc_zone(ns, zone, proc_mask, op_hndlr);
-                if (status != NVME_SUCCESS) {
+                status = nvme_bulk_proc_zone(ns, zone, proc_mask, op_hndlr,
+                                             req);
+                if (status && status != NVME_NO_COMPLETE) {
                     goto out;
                 }
             }
 
             QTAILQ_FOREACH_SAFE(zone, &ns->exp_open_zones, entry, next) {
-                status = nvme_bulk_proc_zone(ns, zone, proc_mask, op_hndlr);
-                if (status != NVME_SUCCESS) {
+                status = nvme_bulk_proc_zone(ns, zone, proc_mask, op_hndlr,
+                                             req);
+                if (status && status != NVME_NO_COMPLETE) {
                     goto out;
                 }
             }
         }
         if (proc_mask & NVME_PROC_FULL_ZONES) {
             QTAILQ_FOREACH_SAFE(zone, &ns->full_zones, entry, next) {
-                status = nvme_bulk_proc_zone(ns, zone, proc_mask, op_hndlr);
-                if (status != NVME_SUCCESS) {
+                status = nvme_bulk_proc_zone(ns, zone, proc_mask, op_hndlr,
+                                             req);
+                if (status && status != NVME_NO_COMPLETE) {
                     goto out;
                 }
             }
@@ -1951,8 +2015,9 @@ static uint16_t nvme_do_zone_op(NvmeNamespace *ns, NvmeZone *zone,
 
         if (proc_mask & NVME_PROC_READ_ONLY_ZONES) {
             for (i = 0; i < ns->num_zones; i++, zone++) {
-                status = nvme_bulk_proc_zone(ns, zone, proc_mask, op_hndlr);
-                if (status != NVME_SUCCESS) {
+                status = nvme_bulk_proc_zone(ns, zone, proc_mask, op_hndlr,
+                                             req);
+                if (status && status != NVME_NO_COMPLETE) {
                     goto out;
                 }
             }
@@ -1968,6 +2033,7 @@ static uint16_t nvme_zone_mgmt_send(NvmeCtrl *n, NvmeRequest *req)
     NvmeCmd *cmd = (NvmeCmd *)&req->cmd;
     NvmeNamespace *ns = req->ns;
     NvmeZone *zone;
+    uintptr_t *resets;
     uint8_t *zd_ext;
     uint32_t dw13 = le32_to_cpu(cmd->cdw13);
     uint64_t slba = 0;
@@ -2002,7 +2068,7 @@ static uint16_t nvme_zone_mgmt_send(NvmeCtrl *n, NvmeRequest *req)
             proc_mask = NVME_PROC_CLOSED_ZONES;
         }
         trace_pci_nvme_open_zone(slba, zone_idx, all);
-        status = nvme_do_zone_op(ns, zone, proc_mask, nvme_open_zone);
+        status = nvme_do_zone_op(ns, zone, proc_mask, nvme_open_zone, req);
         break;
 
     case NVME_ZONE_ACTION_CLOSE:
@@ -2010,7 +2076,7 @@ static uint16_t nvme_zone_mgmt_send(NvmeCtrl *n, NvmeRequest *req)
             proc_mask = NVME_PROC_OPENED_ZONES;
         }
         trace_pci_nvme_close_zone(slba, zone_idx, all);
-        status = nvme_do_zone_op(ns, zone, proc_mask, nvme_close_zone);
+        status = nvme_do_zone_op(ns, zone, proc_mask, nvme_close_zone, req);
         break;
 
     case NVME_ZONE_ACTION_FINISH:
@@ -2018,24 +2084,32 @@ static uint16_t nvme_zone_mgmt_send(NvmeCtrl *n, NvmeRequest *req)
             proc_mask = NVME_PROC_OPENED_ZONES | NVME_PROC_CLOSED_ZONES;
         }
         trace_pci_nvme_finish_zone(slba, zone_idx, all);
-        status = nvme_do_zone_op(ns, zone, proc_mask, nvme_finish_zone);
+        status = nvme_do_zone_op(ns, zone, proc_mask, nvme_finish_zone, req);
         break;
 
     case NVME_ZONE_ACTION_RESET:
+        resets = (uintptr_t *)&req->opaque;
+
         if (all) {
             proc_mask = NVME_PROC_OPENED_ZONES | NVME_PROC_CLOSED_ZONES |
                 NVME_PROC_FULL_ZONES;
         }
         trace_pci_nvme_reset_zone(slba, zone_idx, all);
-        status = nvme_do_zone_op(ns, zone, proc_mask, nvme_reset_zone);
-        break;
+
+        *resets = 1;
+
+        status = nvme_do_zone_op(ns, zone, proc_mask, nvme_reset_zone, req);
+
+        (*resets)--;
+
+        return *resets ? NVME_NO_COMPLETE : req->status;
 
     case NVME_ZONE_ACTION_OFFLINE:
         if (all) {
             proc_mask = NVME_PROC_READ_ONLY_ZONES;
         }
         trace_pci_nvme_offline_zone(slba, zone_idx, all);
-        status = nvme_do_zone_op(ns, zone, proc_mask, nvme_offline_zone);
+        status = nvme_do_zone_op(ns, zone, proc_mask, nvme_offline_zone, req);
         break;
 
     case NVME_ZONE_ACTION_SET_ZD_EXT:
diff --git a/hw/block/trace-events b/hw/block/trace-events
index a455979e5911..6d1686e6dc9d 100644
--- a/hw/block/trace-events
+++ b/hw/block/trace-events
@@ -49,6 +49,7 @@ pci_nvme_dsm_deallocate(uint16_t cid, uint32_t nsid, uint64_t slba, uint32_t nlb
 pci_nvme_compare(uint16_t cid, uint32_t nsid, uint64_t slba, uint32_t nlb) "cid %"PRIu16" nsid %"PRIu32" slba 0x%"PRIx64" nlb %"PRIu32""
 pci_nvme_compare_cb(uint16_t cid) "cid %"PRIu16""
 pci_nvme_aio_discard_cb(uint16_t cid) "cid %"PRIu16""
+pci_nvme_aio_zone_reset_cb(uint16_t cid, uint64_t zslba) "cid %"PRIu16" zslba 0x%"PRIx64""
 pci_nvme_create_sq(uint64_t addr, uint16_t sqid, uint16_t cqid, uint16_t qsize, uint16_t qflags) "create submission queue, addr=0x%"PRIx64", sqid=%"PRIu16", cqid=%"PRIu16", qsize=%"PRIu16", qflags=%"PRIu16""
 pci_nvme_create_cq(uint64_t addr, uint16_t cqid, uint16_t vector, uint16_t size, uint16_t qflags, int ien) "create completion queue, addr=0x%"PRIx64", cqid=%"PRIu16", vector=%"PRIu16", qsize=%"PRIu16", qflags=%"PRIu16", ien=%d"
 pci_nvme_del_sq(uint16_t qid) "deleting submission queue sqid=%"PRIu16""
-- 
2.30.0



  parent reply	other threads:[~2021-02-09  8:30 UTC|newest]

Thread overview: 62+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-02-09  7:30 [PULL 00/56] emulated nvme patches Klaus Jensen
2021-02-09  7:30 ` [PULL 01/56] hw/block/nvme: remove superfluous NvmeCtrl parameter Klaus Jensen
2021-02-09  7:30 ` [PULL 02/56] hw/block/nvme: pull aio error handling Klaus Jensen
2021-02-09  7:30 ` [PULL 03/56] hw/block/nvme: add dulbe support Klaus Jensen
2021-02-09  7:30 ` [PULL 04/56] nvme: add namespace I/O optimization fields to shared header Klaus Jensen
2021-02-09  7:30 ` [PULL 05/56] hw/block/nvme: add the dataset management command Klaus Jensen
2021-02-09  7:30 ` [PULL 06/56] hw/block/nvme: add compare command Klaus Jensen
2021-02-09  7:30 ` [PULL 07/56] hw/block/nvme: fix bad clearing of CAP Klaus Jensen
2021-02-09  7:30 ` [PULL 08/56] hw/block/nvme: Process controller reset and shutdown differently Klaus Jensen
2021-02-09  7:30 ` [PULL 09/56] hw/block/nvme: Generate namespace UUIDs Klaus Jensen
2021-02-09  7:30 ` [PULL 10/56] hw/block/nvme: Separate read and write handlers Klaus Jensen
2021-02-09  7:30 ` [PULL 11/56] hw/block/nvme: Combine nvme_write_zeroes() and nvme_write() Klaus Jensen
2021-02-09  7:30 ` [PULL 12/56] hw/block/nvme: Add Commands Supported and Effects log Klaus Jensen
2021-02-09  7:30 ` [PULL 13/56] hw/block/nvme: Add support for Namespace Types Klaus Jensen
2021-02-09  7:30 ` [PULL 14/56] hw/block/nvme: Support allocated CNS command variants Klaus Jensen
2021-02-09  7:30 ` [PULL 15/56] nvme: Make ZNS-related definitions Klaus Jensen
2021-02-09  7:30 ` [PULL 16/56] hw/block/nvme: Support Zoned Namespace Command Set Klaus Jensen
2021-02-09  7:30 ` [PULL 17/56] hw/block/nvme: Introduce max active and open zone limits Klaus Jensen
2021-02-09  7:30 ` [PULL 18/56] hw/block/nvme: Support Zone Descriptor Extensions Klaus Jensen
2021-02-09  7:30 ` [PULL 19/56] hw/block/nvme: Document zoned parameters in usage text Klaus Jensen
2021-02-09  7:30 ` [PULL 20/56] hw/block/nvme: fix for non-msix machines Klaus Jensen
2021-02-09  7:30 ` [PULL 21/56] hw/block/nvme: conditionally enable DULBE for zoned namespaces Klaus Jensen
2021-02-09  7:30 ` [PULL 22/56] hw/block/nvme: fix shutdown/reset logic Klaus Jensen
2021-02-09  7:30 ` [PULL 23/56] hw/block/nvme: merge implicitly/explicitly opened processing masks Klaus Jensen
2021-02-09  7:30 ` [PULL 24/56] hw/block/nvme: enum style fix Klaus Jensen
2021-02-09  7:30 ` Klaus Jensen [this message]
2021-02-09  7:30 ` [PULL 26/56] hw/block/nvme: add missing string representations for commands Klaus Jensen
2021-02-09  7:30 ` [PULL 27/56] hw/block/nvme: remove unnecessary check for append Klaus Jensen
2021-02-09  7:30 ` [PULL 28/56] hw/block/nvme: Correct error status for unaligned ZA Klaus Jensen
2021-02-09  7:30 ` [PULL 29/56] hw/block/nvme: remove unused argument in nvme_ns_init_zoned Klaus Jensen
2021-02-09  7:30 ` [PULL 30/56] hw/block/nvme: open code for volatile write cache Klaus Jensen
2021-02-09  7:30 ` [PULL 31/56] hw/block/nvme: remove unused argument in nvme_ns_init_blk Klaus Jensen
2021-02-09  7:30 ` [PULL 32/56] hw/block/nvme: split setup and register for namespace Klaus Jensen
2021-02-11  9:53   ` Alexander Graf
2021-02-11 10:41     ` Klaus Jensen
2021-02-11 11:40     ` Philippe Mathieu-Daudé
2021-02-11 11:46       ` Klaus Jensen
2021-02-09  7:30 ` [PULL 33/56] hw/block/nvme: remove unused argument in nvme_ns_setup Klaus Jensen
2021-02-09  7:30 ` [PULL 34/56] hw/block/nvme: fix zone write finalize Klaus Jensen
2021-02-09  7:30 ` [PULL 35/56] nvme: introduce bit 5 for critical warning Klaus Jensen
2021-02-09  7:30 ` [PULL 36/56] hw/block/nvme: add smart_critical_warning property Klaus Jensen
2021-02-09  7:30 ` [PULL 37/56] hw/block/nvme: trigger async event during injecting smart warning Klaus Jensen
2021-02-09  7:30 ` [PULL 38/56] hw/block/nvme: add size to mmio read/write trace events Klaus Jensen
2021-02-09  7:30 ` [PULL 39/56] hw/block/nvme: fix 64 bit register hi/lo split writes Klaus Jensen
2021-02-09  7:30 ` [PULL 40/56] hw/block/nvme: indicate CMB support through controller capabilities register Klaus Jensen
2021-02-09  7:30 ` [PULL 41/56] hw/block/nvme: move msix table and pba to BAR 0 Klaus Jensen
2021-02-09  7:30 ` [PULL 42/56] hw/block/nvme: allow cmb and pmr to coexist Klaus Jensen
2021-02-09  7:30 ` [PULL 43/56] hw/block/nvme: rename PMR/CMB shift/mask fields Klaus Jensen
2021-02-09  7:30 ` [PULL 44/56] hw/block/nvme: remove redundant zeroing of PMR registers Klaus Jensen
2021-02-09  7:30 ` [PULL 45/56] hw/block/nvme: disable PMR at boot up Klaus Jensen
2021-02-09  7:30 ` [PULL 46/56] hw/block/nvme: add PMR RDS/WDS support Klaus Jensen
2021-02-09  7:30 ` [PULL 47/56] hw/block/nvme: move cmb logic to v1.4 Klaus Jensen
2021-02-09  7:30 ` [PULL 48/56] hw/block/nvme: bump " Klaus Jensen
2021-02-09  7:30 ` [PULL 49/56] hw/block/nvme: lift cmb restrictions Klaus Jensen
2021-02-09  7:30 ` [PULL 50/56] hw/block/nvme: error if drive less than a zone size Klaus Jensen
2021-02-09  7:30 ` [PULL 51/56] hw/block/nvme: fix set feature for error recovery Klaus Jensen
2021-02-09  7:30 ` [PULL 52/56] hw/block/nvme: fix set feature save field check Klaus Jensen
2021-02-09  7:30 ` [PULL 53/56] hw/block/nvme: align with existing style Klaus Jensen
2021-02-09  7:30 ` [PULL 54/56] hw/block/nvme: fix wrong parameter name 'cross_read' Klaus Jensen
2021-02-09  7:31 ` [PULL 55/56] hw/block/nvme: fix zone boundary check for append Klaus Jensen
2021-02-09  7:31 ` [PULL 56/56] hw/block/nvme: refactor the logic for zone write checks Klaus Jensen
2021-02-09 14:52 ` [PULL 00/56] emulated nvme patches Peter Maydell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210209073101.548811-26-its@irrelevant.dk \
    --to=its@irrelevant.dk \
    --cc=dmitry.fomichev@wdc.com \
    --cc=fam@euphon.net \
    --cc=k.jensen@samsung.com \
    --cc=kbusch@kernel.org \
    --cc=kwolf@redhat.com \
    --cc=mreitz@redhat.com \
    --cc=peter.maydell@linaro.org \
    --cc=qemu-block@nongnu.org \
    --cc=qemu-devel@nongnu.org \
    --cc=stefanha@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).