From: Stefan Hajnoczi <stefanha@redhat.com>
To: Peter Maydell <peter.maydell@linaro.org>, qemu-devel@nongnu.org
Cc: "Fam Zheng" <fam@euphon.net>,
"John G Johnson" <john.g.johnson@oracle.com>,
thuth@redhat.com, "Jagannathan Raman" <jag.raman@oracle.com>,
"Eduardo Habkost" <ehabkost@redhat.com>,
qemu-block@nongnu.org, "Michael S. Tsirkin" <mst@redhat.com>,
"Denis V. Lunev" <den@openvz.org>,
"Philippe Mathieu-Daudé" <philmd@redhat.com>,
"Stefan Hajnoczi" <stefanha@redhat.com>,
"Daniel P. Berrangé" <berrange@redhat.com>,
"Wainer dos Santos Moschetta" <wainersm@redhat.com>,
"Elena Ufimtseva" <elena.ufimtseva@oracle.com>,
"Igor Mammedov" <imammedo@redhat.com>,
"Paolo Bonzini" <pbonzini@redhat.com>,
"Alex Bennée" <alex.bennee@linaro.org>
Subject: [PULL v4 22/27] multi-process: PCI BAR read/write handling for proxy & remote endpoints
Date: Wed, 10 Feb 2021 09:26:23 +0000 [thread overview]
Message-ID: <20210210092628.193785-23-stefanha@redhat.com> (raw)
In-Reply-To: <20210210092628.193785-1-stefanha@redhat.com>
From: Jagannathan Raman <jag.raman@oracle.com>
Proxy device object implements handler for PCI BAR writes and reads.
The handler uses BAR_WRITE/BAR_READ message to communicate to the
remote process with the BAR address and value to be written/read.
The remote process implements handler for BAR_WRITE/BAR_READ
message.
Signed-off-by: Jagannathan Raman <jag.raman@oracle.com>
Signed-off-by: Elena Ufimtseva <elena.ufimtseva@oracle.com>
Signed-off-by: John G Johnson <john.g.johnson@oracle.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: a8b76714a9688be5552c4c92d089bc9e8a4707ff.1611938319.git.jag.raman@oracle.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
---
include/hw/remote/mpqemu-link.h | 10 ++++
include/hw/remote/proxy.h | 9 ++++
hw/remote/message.c | 83 +++++++++++++++++++++++++++++++++
hw/remote/mpqemu-link.c | 6 +++
hw/remote/proxy.c | 60 ++++++++++++++++++++++++
5 files changed, 168 insertions(+)
diff --git a/include/hw/remote/mpqemu-link.h b/include/hw/remote/mpqemu-link.h
index 7bc0bddb5a..6303e62b17 100644
--- a/include/hw/remote/mpqemu-link.h
+++ b/include/hw/remote/mpqemu-link.h
@@ -37,6 +37,8 @@ typedef enum {
MPQEMU_CMD_RET,
MPQEMU_CMD_PCI_CFGWRITE,
MPQEMU_CMD_PCI_CFGREAD,
+ MPQEMU_CMD_BAR_WRITE,
+ MPQEMU_CMD_BAR_READ,
MPQEMU_CMD_MAX,
} MPQemuCmd;
@@ -52,6 +54,13 @@ typedef struct {
int len;
} PciConfDataMsg;
+typedef struct {
+ hwaddr addr;
+ uint64_t val;
+ unsigned size;
+ bool memory;
+} BarAccessMsg;
+
/**
* MPQemuMsg:
* @cmd: The remote command
@@ -71,6 +80,7 @@ typedef struct {
uint64_t u64;
PciConfDataMsg pci_conf_data;
SyncSysmemMsg sync_sysmem;
+ BarAccessMsg bar_access;
} data;
int fds[REMOTE_MAX_FDS];
diff --git a/include/hw/remote/proxy.h b/include/hw/remote/proxy.h
index faa9c4d580..ea7fa4fb3c 100644
--- a/include/hw/remote/proxy.h
+++ b/include/hw/remote/proxy.h
@@ -15,6 +15,14 @@
#define TYPE_PCI_PROXY_DEV "x-pci-proxy-dev"
OBJECT_DECLARE_SIMPLE_TYPE(PCIProxyDev, PCI_PROXY_DEV)
+typedef struct ProxyMemoryRegion {
+ PCIProxyDev *dev;
+ MemoryRegion mr;
+ bool memory;
+ bool present;
+ uint8_t type;
+} ProxyMemoryRegion;
+
struct PCIProxyDev {
PCIDevice parent_dev;
char *fd;
@@ -28,6 +36,7 @@ struct PCIProxyDev {
QemuMutex io_mutex;
QIOChannel *ioc;
Error *migration_blocker;
+ ProxyMemoryRegion region[PCI_NUM_REGIONS];
};
#endif /* PROXY_H */
diff --git a/hw/remote/message.c b/hw/remote/message.c
index 636bd161bd..f2e84457e0 100644
--- a/hw/remote/message.c
+++ b/hw/remote/message.c
@@ -16,11 +16,14 @@
#include "qapi/error.h"
#include "sysemu/runstate.h"
#include "hw/pci/pci.h"
+#include "exec/memattrs.h"
static void process_config_write(QIOChannel *ioc, PCIDevice *dev,
MPQemuMsg *msg, Error **errp);
static void process_config_read(QIOChannel *ioc, PCIDevice *dev,
MPQemuMsg *msg, Error **errp);
+static void process_bar_write(QIOChannel *ioc, MPQemuMsg *msg, Error **errp);
+static void process_bar_read(QIOChannel *ioc, MPQemuMsg *msg, Error **errp);
void coroutine_fn mpqemu_remote_msg_loop_co(void *data)
{
@@ -52,6 +55,12 @@ void coroutine_fn mpqemu_remote_msg_loop_co(void *data)
case MPQEMU_CMD_PCI_CFGREAD:
process_config_read(com->ioc, pci_dev, &msg, &local_err);
break;
+ case MPQEMU_CMD_BAR_WRITE:
+ process_bar_write(com->ioc, &msg, &local_err);
+ break;
+ case MPQEMU_CMD_BAR_READ:
+ process_bar_read(com->ioc, &msg, &local_err);
+ break;
default:
error_setg(&local_err,
"Unknown command (%d) received for device %s"
@@ -115,3 +124,77 @@ static void process_config_read(QIOChannel *ioc, PCIDevice *dev,
getpid());
}
}
+
+static void process_bar_write(QIOChannel *ioc, MPQemuMsg *msg, Error **errp)
+{
+ ERRP_GUARD();
+ BarAccessMsg *bar_access = &msg->data.bar_access;
+ AddressSpace *as =
+ bar_access->memory ? &address_space_memory : &address_space_io;
+ MPQemuMsg ret = { 0 };
+ MemTxResult res;
+ uint64_t val;
+
+ if (!is_power_of_2(bar_access->size) ||
+ (bar_access->size > sizeof(uint64_t))) {
+ ret.data.u64 = UINT64_MAX;
+ goto fail;
+ }
+
+ val = cpu_to_le64(bar_access->val);
+
+ res = address_space_rw(as, bar_access->addr, MEMTXATTRS_UNSPECIFIED,
+ (void *)&val, bar_access->size, true);
+
+ if (res != MEMTX_OK) {
+ error_setg(errp, "Bad address %"PRIx64" for mem write, pid "FMT_pid".",
+ bar_access->addr, getpid());
+ ret.data.u64 = -1;
+ }
+
+fail:
+ ret.cmd = MPQEMU_CMD_RET;
+ ret.size = sizeof(ret.data.u64);
+
+ if (!mpqemu_msg_send(&ret, ioc, NULL)) {
+ error_prepend(errp, "Error returning code to proxy, pid "FMT_pid": ",
+ getpid());
+ }
+}
+
+static void process_bar_read(QIOChannel *ioc, MPQemuMsg *msg, Error **errp)
+{
+ ERRP_GUARD();
+ BarAccessMsg *bar_access = &msg->data.bar_access;
+ MPQemuMsg ret = { 0 };
+ AddressSpace *as;
+ MemTxResult res;
+ uint64_t val = 0;
+
+ as = bar_access->memory ? &address_space_memory : &address_space_io;
+
+ if (!is_power_of_2(bar_access->size) ||
+ (bar_access->size > sizeof(uint64_t))) {
+ val = UINT64_MAX;
+ goto fail;
+ }
+
+ res = address_space_rw(as, bar_access->addr, MEMTXATTRS_UNSPECIFIED,
+ (void *)&val, bar_access->size, false);
+
+ if (res != MEMTX_OK) {
+ error_setg(errp, "Bad address %"PRIx64" for mem read, pid "FMT_pid".",
+ bar_access->addr, getpid());
+ val = UINT64_MAX;
+ }
+
+fail:
+ ret.cmd = MPQEMU_CMD_RET;
+ ret.data.u64 = le64_to_cpu(val);
+ ret.size = sizeof(ret.data.u64);
+
+ if (!mpqemu_msg_send(&ret, ioc, NULL)) {
+ error_prepend(errp, "Error returning code to proxy, pid "FMT_pid": ",
+ getpid());
+ }
+}
diff --git a/hw/remote/mpqemu-link.c b/hw/remote/mpqemu-link.c
index b45f325686..52bfeddcdc 100644
--- a/hw/remote/mpqemu-link.c
+++ b/hw/remote/mpqemu-link.c
@@ -248,6 +248,12 @@ bool mpqemu_msg_valid(MPQemuMsg *msg)
return false;
}
break;
+ case MPQEMU_CMD_BAR_WRITE:
+ case MPQEMU_CMD_BAR_READ:
+ if ((msg->size != sizeof(BarAccessMsg)) || (msg->num_fds != 0)) {
+ return false;
+ }
+ break;
default:
break;
}
diff --git a/hw/remote/proxy.c b/hw/remote/proxy.c
index 2b1439432b..22eb422231 100644
--- a/hw/remote/proxy.c
+++ b/hw/remote/proxy.c
@@ -152,3 +152,63 @@ static void pci_proxy_dev_register_types(void)
}
type_init(pci_proxy_dev_register_types)
+
+static void send_bar_access_msg(PCIProxyDev *pdev, MemoryRegion *mr,
+ bool write, hwaddr addr, uint64_t *val,
+ unsigned size, bool memory)
+{
+ MPQemuMsg msg = { 0 };
+ long ret = -EINVAL;
+ Error *local_err = NULL;
+
+ msg.size = sizeof(BarAccessMsg);
+ msg.data.bar_access.addr = mr->addr + addr;
+ msg.data.bar_access.size = size;
+ msg.data.bar_access.memory = memory;
+
+ if (write) {
+ msg.cmd = MPQEMU_CMD_BAR_WRITE;
+ msg.data.bar_access.val = *val;
+ } else {
+ msg.cmd = MPQEMU_CMD_BAR_READ;
+ }
+
+ ret = mpqemu_msg_send_and_await_reply(&msg, pdev, &local_err);
+ if (local_err) {
+ error_report_err(local_err);
+ }
+
+ if (!write) {
+ *val = ret;
+ }
+}
+
+static void proxy_bar_write(void *opaque, hwaddr addr, uint64_t val,
+ unsigned size)
+{
+ ProxyMemoryRegion *pmr = opaque;
+
+ send_bar_access_msg(pmr->dev, &pmr->mr, true, addr, &val, size,
+ pmr->memory);
+}
+
+static uint64_t proxy_bar_read(void *opaque, hwaddr addr, unsigned size)
+{
+ ProxyMemoryRegion *pmr = opaque;
+ uint64_t val;
+
+ send_bar_access_msg(pmr->dev, &pmr->mr, false, addr, &val, size,
+ pmr->memory);
+
+ return val;
+}
+
+const MemoryRegionOps proxy_mr_ops = {
+ .read = proxy_bar_read,
+ .write = proxy_bar_write,
+ .endianness = DEVICE_NATIVE_ENDIAN,
+ .impl = {
+ .min_access_size = 1,
+ .max_access_size = 8,
+ },
+};
--
2.29.2
next prev parent reply other threads:[~2021-02-10 9:44 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-02-10 9:26 [PULL v4 00/27] Block patches Stefan Hajnoczi
2021-02-10 9:26 ` [PULL v4 01/27] .github: point Repo Lockdown bot to GitLab repo Stefan Hajnoczi
2021-02-10 9:26 ` [PULL v4 02/27] gitmodules: use GitLab repos instead of qemu.org Stefan Hajnoczi
2021-02-10 9:26 ` [PULL v4 03/27] gitlab-ci: remove redundant GitLab repo URL command Stefan Hajnoczi
2021-02-10 9:26 ` [PULL v4 04/27] docs: update README to use GitLab repo URLs Stefan Hajnoczi
2021-02-10 9:26 ` [PULL v4 05/27] pc-bios: update mirror URLs to GitLab Stefan Hajnoczi
2021-02-10 9:26 ` [PULL v4 06/27] get_maintainer: update repo URL " Stefan Hajnoczi
2021-02-10 9:26 ` [PULL v4 07/27] multi-process: add the concept description to docs/devel/qemu-multiprocess Stefan Hajnoczi
2023-06-06 14:21 ` Philippe Mathieu-Daudé
2021-02-10 9:26 ` [PULL v4 08/27] multi-process: add configure and usage information Stefan Hajnoczi
2021-02-10 9:26 ` [PULL v4 09/27] memory: alloc RAM from file at offset Stefan Hajnoczi
2021-02-10 9:26 ` [PULL v4 10/27] multi-process: Add config option for multi-process QEMU Stefan Hajnoczi
2021-02-10 9:26 ` [PULL v4 11/27] multi-process: setup PCI host bridge for remote device Stefan Hajnoczi
2021-02-10 9:26 ` [PULL v4 12/27] multi-process: setup a machine object for remote device process Stefan Hajnoczi
2021-02-10 9:26 ` [PULL v4 13/27] io: add qio_channel_writev_full_all helper Stefan Hajnoczi
2021-02-10 9:26 ` [PULL v4 14/27] io: add qio_channel_readv_full_all_eof & qio_channel_readv_full_all helpers Stefan Hajnoczi
2021-02-11 15:34 ` Max Reitz
2021-02-11 15:46 ` Daniel P. Berrangé
2021-02-11 15:48 ` Jag Raman
2021-02-10 9:26 ` [PULL v4 15/27] multi-process: define MPQemuMsg format and transmission functions Stefan Hajnoczi
2021-02-10 9:26 ` [PULL v4 16/27] multi-process: Initialize message handler in remote device Stefan Hajnoczi
2021-02-10 9:26 ` [PULL v4 17/27] multi-process: Associate fd of a PCIDevice with its object Stefan Hajnoczi
2021-02-10 9:26 ` [PULL v4 18/27] multi-process: setup memory manager for remote device Stefan Hajnoczi
2021-02-10 9:26 ` [PULL v4 19/27] multi-process: introduce proxy object Stefan Hajnoczi
2021-02-10 9:26 ` [PULL v4 20/27] multi-process: add proxy communication functions Stefan Hajnoczi
2021-02-10 9:26 ` [PULL v4 21/27] multi-process: Forward PCI config space acceses to the remote process Stefan Hajnoczi
2021-02-10 9:26 ` Stefan Hajnoczi [this message]
2021-02-10 9:26 ` [PULL v4 23/27] multi-process: Synchronize remote memory Stefan Hajnoczi
2021-02-10 9:26 ` [PULL v4 24/27] multi-process: create IOHUB object to handle irq Stefan Hajnoczi
2021-02-10 9:26 ` [PULL v4 25/27] multi-process: Retrieve PCI info from remote process Stefan Hajnoczi
2021-02-10 9:26 ` [PULL v4 26/27] multi-process: perform device reset in the " Stefan Hajnoczi
2021-02-10 9:26 ` [PULL v4 27/27] docs: fix Parallels Image "dirty bitmap" section Stefan Hajnoczi
2021-02-10 17:33 ` [PULL v4 00/27] Block patches Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210210092628.193785-23-stefanha@redhat.com \
--to=stefanha@redhat.com \
--cc=alex.bennee@linaro.org \
--cc=berrange@redhat.com \
--cc=den@openvz.org \
--cc=ehabkost@redhat.com \
--cc=elena.ufimtseva@oracle.com \
--cc=fam@euphon.net \
--cc=imammedo@redhat.com \
--cc=jag.raman@oracle.com \
--cc=john.g.johnson@oracle.com \
--cc=mst@redhat.com \
--cc=pbonzini@redhat.com \
--cc=peter.maydell@linaro.org \
--cc=philmd@redhat.com \
--cc=qemu-block@nongnu.org \
--cc=qemu-devel@nongnu.org \
--cc=thuth@redhat.com \
--cc=wainersm@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).