[PATCH 40/44] hw/arm/mps2-tz: Support running APB peripherals on different clock

[Peter Maydell <peter.maydell@linaro.org>]

The AN547 runs the APB peripherals outside the SSE-300 on a different
and slightly slower clock than it runs the SSE-300 with.  Support
making the APB peripheral clock frequency board-specific.  (For our
implementation only the UARTs actually take a clock.)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/arm/mps2-tz.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/hw/arm/mps2-tz.c b/hw/arm/mps2-tz.c
index fe324e86b3d..47215f1b97c 100644
--- a/hw/arm/mps2-tz.c
+++ b/hw/arm/mps2-tz.c
@@ -106,6 +106,7 @@ struct MPS2TZMachineClass {
     MPS2TZFPGAType fpga_type;
     uint32_t scc_id;
     uint32_t sysclk_frq; /* Main SYSCLK frequency in Hz */
+    uint32_t apb_periph_frq; /* APB peripheral frequency in Hz */
     uint32_t len_oscclk;
     const uint32_t *oscclk;
     uint32_t fpgaio_num_leds; /* Number of LEDs in FPGAIO LED0 register */
@@ -369,7 +370,7 @@ static MemoryRegion *make_uart(MPS2TZMachineState *mms, void *opaque,
 
     object_initialize_child(OBJECT(mms), name, uart, TYPE_CMSDK_APB_UART);
     qdev_prop_set_chr(DEVICE(uart), "chardev", serial_hd(i));
-    qdev_prop_set_uint32(DEVICE(uart), "pclk-frq", mmc->sysclk_frq);
+    qdev_prop_set_uint32(DEVICE(uart), "pclk-frq", mmc->apb_periph_frq);
     sysbus_realize(SYS_BUS_DEVICE(uart), &error_fatal);
     s = SYS_BUS_DEVICE(uart);
     sysbus_connect_irq(s, 0, get_sse_irq_in(mms, irqs[0]));
@@ -1034,6 +1035,7 @@ static void mps2tz_an505_class_init(ObjectClass *oc, void *data)
     mc->default_cpu_type = ARM_CPU_TYPE_NAME("cortex-m33");
     mmc->scc_id = 0x41045050;
     mmc->sysclk_frq = 20 * 1000 * 1000; /* 20MHz */
+    mmc->apb_periph_frq = mmc->sysclk_frq;
     mmc->oscclk = an505_oscclk;
     mmc->len_oscclk = ARRAY_SIZE(an505_oscclk);
     mmc->fpgaio_num_leds = 2;
@@ -1059,6 +1061,7 @@ static void mps2tz_an521_class_init(ObjectClass *oc, void *data)
     mc->default_cpu_type = ARM_CPU_TYPE_NAME("cortex-m33");
     mmc->scc_id = 0x41045210;
     mmc->sysclk_frq = 20 * 1000 * 1000; /* 20MHz */
+    mmc->apb_periph_frq = mmc->sysclk_frq;
     mmc->oscclk = an505_oscclk; /* AN521 is the same as AN505 here */
     mmc->len_oscclk = ARRAY_SIZE(an505_oscclk);
     mmc->fpgaio_num_leds = 2;
@@ -1084,6 +1087,7 @@ static void mps3tz_an524_class_init(ObjectClass *oc, void *data)
     mc->default_cpu_type = ARM_CPU_TYPE_NAME("cortex-m33");
     mmc->scc_id = 0x41045240;
     mmc->sysclk_frq = 32 * 1000 * 1000; /* 32MHz */
+    mmc->apb_periph_frq = mmc->sysclk_frq;
     mmc->oscclk = an524_oscclk;
     mmc->len_oscclk = ARRAY_SIZE(an524_oscclk);
     mmc->fpgaio_num_leds = 10;
-- 
2.20.1