From: "Philippe Mathieu-Daudé" <f4bug@amsat.org>
To: qemu-devel@nongnu.org
Cc: "Bin Meng" <bin.meng@windriver.com>,
"Philippe Mathieu-Daudé" <f4bug@amsat.org>,
qemu-block@nongnu.org
Subject: [PULL 13/18] hw/sd: sd: Move the sd_block_{read, write} and macros ahead
Date: Sat, 20 Feb 2021 01:13:04 +0100 [thread overview]
Message-ID: <20210220001309.2225022-14-f4bug@amsat.org> (raw)
In-Reply-To: <20210220001309.2225022-1-f4bug@amsat.org>
From: Bin Meng <bin.meng@windriver.com>
These APIs and macros may be referenced by functions that are
currently before them. Move them ahead a little bit.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210216150225.27996-5-bmeng.cn@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
---
hw/sd/sd.c | 42 +++++++++++++++++++++---------------------
1 file changed, 21 insertions(+), 21 deletions(-)
diff --git a/hw/sd/sd.c b/hw/sd/sd.c
index 47ac0c51a8e..4c6e7c2a33e 100644
--- a/hw/sd/sd.c
+++ b/hw/sd/sd.c
@@ -739,6 +739,27 @@ void sd_set_cb(SDState *sd, qemu_irq readonly, qemu_irq insert)
qemu_set_irq(insert, sd->blk ? blk_is_inserted(sd->blk) : 0);
}
+static void sd_blk_read(SDState *sd, uint64_t addr, uint32_t len)
+{
+ trace_sdcard_read_block(addr, len);
+ if (!sd->blk || blk_pread(sd->blk, addr, sd->data, len) < 0) {
+ fprintf(stderr, "sd_blk_read: read error on host side\n");
+ }
+}
+
+static void sd_blk_write(SDState *sd, uint64_t addr, uint32_t len)
+{
+ trace_sdcard_write_block(addr, len);
+ if (!sd->blk || blk_pwrite(sd->blk, addr, sd->data, len, 0) < 0) {
+ fprintf(stderr, "sd_blk_write: write error on host side\n");
+ }
+}
+
+#define BLK_READ_BLOCK(a, len) sd_blk_read(sd, a, len)
+#define BLK_WRITE_BLOCK(a, len) sd_blk_write(sd, a, len)
+#define APP_READ_BLOCK(a, len) memset(sd->data, 0xec, len)
+#define APP_WRITE_BLOCK(a, len)
+
static void sd_erase(SDState *sd)
{
int i;
@@ -1754,27 +1775,6 @@ send_response:
return rsplen;
}
-static void sd_blk_read(SDState *sd, uint64_t addr, uint32_t len)
-{
- trace_sdcard_read_block(addr, len);
- if (!sd->blk || blk_pread(sd->blk, addr, sd->data, len) < 0) {
- fprintf(stderr, "sd_blk_read: read error on host side\n");
- }
-}
-
-static void sd_blk_write(SDState *sd, uint64_t addr, uint32_t len)
-{
- trace_sdcard_write_block(addr, len);
- if (!sd->blk || blk_pwrite(sd->blk, addr, sd->data, len, 0) < 0) {
- fprintf(stderr, "sd_blk_write: write error on host side\n");
- }
-}
-
-#define BLK_READ_BLOCK(a, len) sd_blk_read(sd, a, len)
-#define BLK_WRITE_BLOCK(a, len) sd_blk_write(sd, a, len)
-#define APP_READ_BLOCK(a, len) memset(sd->data, 0xec, len)
-#define APP_WRITE_BLOCK(a, len)
-
void sd_write_byte(SDState *sd, uint8_t value)
{
int i;
--
2.26.2
next prev parent reply other threads:[~2021-02-20 0:25 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-02-20 0:12 [PULL 00/18] SD/MMC patches for 2021-02-20 Philippe Mathieu-Daudé
2021-02-20 0:12 ` [PULL 01/18] hw/sd: ssi-sd: Support multiple block read Philippe Mathieu-Daudé
2021-02-20 0:12 ` [PULL 02/18] hw/sd: sd: Remove duplicated codes in single/multiple block read/write Philippe Mathieu-Daudé
2021-02-20 0:12 ` [PULL 03/18] hw/sd: sd: Allow single/multiple block write for SPI mode Philippe Mathieu-Daudé
2021-02-20 0:12 ` [PULL 04/18] hw/sd: Introduce receive_ready() callback Philippe Mathieu-Daudé
2021-02-20 0:12 ` [PULL 05/18] hw/sd: ssi-sd: Support single block write Philippe Mathieu-Daudé
2021-02-20 0:12 ` [PULL 06/18] hw/sd: ssi-sd: Support multiple " Philippe Mathieu-Daudé
2021-02-20 0:12 ` [PULL 07/18] hw/sd: ssi-sd: Fix SEND_IF_COND (CMD8) response Philippe Mathieu-Daudé
2021-02-20 0:12 ` [PULL 08/18] hw/sd: ssi-sd: Fix STOP_TRANSMISSION (CMD12) response Philippe Mathieu-Daudé
2021-02-20 0:13 ` [PULL 09/18] hw/sd: ssi-sd: Handle the rest commands with R1b response type Philippe Mathieu-Daudé
2021-02-20 0:13 ` [PULL 10/18] hw/sd: sd: Fix address check in sd_erase() Philippe Mathieu-Daudé
2021-02-20 0:13 ` [PULL 11/18] hw/sd: sd: Only SDSC cards support CMD28/29/30 Philippe Mathieu-Daudé
2021-02-20 0:13 ` [PULL 12/18] hw/sd: sd: Fix CMD30 response type Philippe Mathieu-Daudé
2021-02-20 0:13 ` Philippe Mathieu-Daudé [this message]
2021-02-20 0:13 ` [PULL 14/18] hw/sd: sd: Skip write protect groups check in sd_erase() for high capacity cards Philippe Mathieu-Daudé
2021-02-20 0:13 ` [PULL 15/18] hw/sd: sd: Skip write protect groups check in CMD24/25 " Philippe Mathieu-Daudé
2021-02-20 0:13 ` [PULL 16/18] hw/sd: sd: Bypass the RCA check for CMD13 in SPI mode Philippe Mathieu-Daudé
2021-02-20 0:13 ` [PULL 17/18] hw/sd: sdhci: Simplify updating s->prnsts in sdhci_sdma_transfer_multi_blocks() Philippe Mathieu-Daudé
2021-02-20 0:13 ` [PULL 18/18] MAINTAINERS: Add Bin Meng as co-maintainer for SD/MMC cards Philippe Mathieu-Daudé
2021-02-21 11:45 ` [PULL 00/18] SD/MMC patches for 2021-02-20 Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210220001309.2225022-14-f4bug@amsat.org \
--to=f4bug@amsat.org \
--cc=bin.meng@windriver.com \
--cc=qemu-block@nongnu.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).