From: Paolo Bonzini <pbonzini@redhat.com>
To: qemu-devel@nongnu.org
Subject: [PULL 10/29] scsi: introduce scsi_sense_from_errno()
Date: Fri, 26 Feb 2021 09:05:07 +0100 [thread overview]
Message-ID: <20210226080526.651705-11-pbonzini@redhat.com> (raw)
In-Reply-To: <20210226080526.651705-1-pbonzini@redhat.com>
The new function is an extension of the switch statement in scsi-disk.c
which also includes the errno cases only found in sg_io_sense_from_errno.
This allows us to consolidate the errno handling.
Extracted from a patch by Hannes Reinecke <hare@suse.de>.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
hw/scsi/scsi-disk.c | 45 +++++++-------------------------------
include/scsi/utils.h | 2 ++
scsi/utils.c | 51 +++++++++++++++++++++++++++++++++++---------
3 files changed, 51 insertions(+), 47 deletions(-)
diff --git a/hw/scsi/scsi-disk.c b/hw/scsi/scsi-disk.c
index 36aa872445..9c6099ffc4 100644
--- a/hw/scsi/scsi-disk.c
+++ b/hw/scsi/scsi-disk.c
@@ -194,13 +194,13 @@ static bool scsi_handle_rw_error(SCSIDiskReq *r, int error, bool acct_failed)
SCSIDiskClass *sdc = (SCSIDiskClass *) object_get_class(OBJECT(s));
BlockErrorAction action = blk_get_error_action(s->qdev.conf.blk,
is_read, error);
+ SCSISense sense;
if (action == BLOCK_ERROR_ACTION_REPORT) {
if (acct_failed) {
block_acct_failed(blk_get_stats(s->qdev.conf.blk), &r->acct);
}
- switch (error) {
- case 0:
+ if (error == 0) {
/* A passthrough command has run and has produced sense data; check
* whether the error has to be handled by the guest or should rather
* pause the host.
@@ -213,41 +213,12 @@ static bool scsi_handle_rw_error(SCSIDiskReq *r, int error, bool acct_failed)
return true;
}
error = scsi_sense_buf_to_errno(r->req.sense, sizeof(r->req.sense));
- break;
-#ifdef CONFIG_LINUX
- /* These errno mapping are specific to Linux. For more information:
- * - scsi_decide_disposition in drivers/scsi/scsi_error.c
- * - scsi_result_to_blk_status in drivers/scsi/scsi_lib.c
- * - blk_errors[] in block/blk-core.c
- */
- case EBADE:
- /* DID_NEXUS_FAILURE -> BLK_STS_NEXUS. */
- scsi_req_complete(&r->req, RESERVATION_CONFLICT);
- break;
- case ENODATA:
- /* DID_MEDIUM_ERROR -> BLK_STS_MEDIUM. */
- scsi_check_condition(r, SENSE_CODE(READ_ERROR));
- break;
- case EREMOTEIO:
- /* DID_TARGET_FAILURE -> BLK_STS_TARGET. */
- scsi_req_complete(&r->req, HARDWARE_ERROR);
- break;
-#endif
- case ENOMEDIUM:
- scsi_check_condition(r, SENSE_CODE(NO_MEDIUM));
- break;
- case ENOMEM:
- scsi_check_condition(r, SENSE_CODE(TARGET_FAILURE));
- break;
- case EINVAL:
- scsi_check_condition(r, SENSE_CODE(INVALID_FIELD));
- break;
- case ENOSPC:
- scsi_check_condition(r, SENSE_CODE(SPACE_ALLOC_FAILED));
- break;
- default:
- scsi_check_condition(r, SENSE_CODE(IO_ERROR));
- break;
+ } else {
+ int status = scsi_sense_from_errno(error, &sense);
+ if (status == CHECK_CONDITION) {
+ scsi_req_build_sense(&r->req, sense);
+ }
+ scsi_req_complete(&r->req, status);
}
}
diff --git a/include/scsi/utils.h b/include/scsi/utils.h
index 096489c6cd..ff7c7091b6 100644
--- a/include/scsi/utils.h
+++ b/include/scsi/utils.h
@@ -135,4 +135,6 @@ int sg_io_sense_from_errno(int errno_value, struct sg_io_hdr *io_hdr,
SCSISense *sense);
#endif
+int scsi_sense_from_errno(int errno_value, SCSISense *sense);
+
#endif
diff --git a/scsi/utils.c b/scsi/utils.c
index 793c3a6b9c..6b56e01002 100644
--- a/scsi/utils.c
+++ b/scsi/utils.c
@@ -565,21 +565,52 @@ const char *scsi_command_name(uint8_t cmd)
return names[cmd];
}
+int scsi_sense_from_errno(int errno_value, SCSISense *sense)
+{
+ switch (errno_value) {
+ case 0:
+ return GOOD;
+ case EDOM:
+ return TASK_SET_FULL;
+#ifdef CONFIG_LINUX
+ /* These errno mapping are specific to Linux. For more information:
+ * - scsi_decide_disposition in drivers/scsi/scsi_error.c
+ * - scsi_result_to_blk_status in drivers/scsi/scsi_lib.c
+ * - blk_errors[] in block/blk-core.c
+ */
+ case EBADE:
+ return RESERVATION_CONFLICT;
+ case ENODATA:
+ *sense = SENSE_CODE(READ_ERROR);
+ return CHECK_CONDITION;
+ case EREMOTEIO:
+ *sense = SENSE_CODE(LUN_COMM_FAILURE);
+ return CHECK_CONDITION;
+#endif
+ case ENOMEDIUM:
+ *sense = SENSE_CODE(NO_MEDIUM);
+ return CHECK_CONDITION;
+ case ENOMEM:
+ *sense = SENSE_CODE(TARGET_FAILURE);
+ return CHECK_CONDITION;
+ case EINVAL:
+ *sense = SENSE_CODE(INVALID_FIELD);
+ return CHECK_CONDITION;
+ case ENOSPC:
+ *sense = SENSE_CODE(SPACE_ALLOC_FAILED);
+ return CHECK_CONDITION;
+ default:
+ *sense = SENSE_CODE(IO_ERROR);
+ return CHECK_CONDITION;
+ }
+}
+
#ifdef CONFIG_LINUX
int sg_io_sense_from_errno(int errno_value, struct sg_io_hdr *io_hdr,
SCSISense *sense)
{
if (errno_value != 0) {
- switch (errno_value) {
- case EDOM:
- return TASK_SET_FULL;
- case ENOMEM:
- *sense = SENSE_CODE(TARGET_FAILURE);
- return CHECK_CONDITION;
- default:
- *sense = SENSE_CODE(IO_ERROR);
- return CHECK_CONDITION;
- }
+ return scsi_sense_from_errno(errno_value, sense);
} else {
if (io_hdr->host_status == SG_ERR_DID_NO_CONNECT ||
io_hdr->host_status == SG_ERR_DID_BUS_BUSY ||
--
2.29.2
next prev parent reply other threads:[~2021-02-26 8:23 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-02-26 8:04 [PULL 00/29] Misc patches for 2021-02-25 Paolo Bonzini
2021-02-26 8:04 ` [PULL 01/29] hvf: Sign the code after installation Paolo Bonzini
2021-02-26 8:04 ` [PULL 02/29] configure: fix --enable-fuzzing linker failures Paolo Bonzini
2021-02-26 8:05 ` [PULL 03/29] multiprocess: move feature to meson_options.txt Paolo Bonzini
2021-02-26 8:05 ` [PULL 04/29] scsi: make io_timeout configurable Paolo Bonzini
2021-02-26 8:05 ` [PULL 05/29] scsi: add tracing for SG_IO commands Paolo Bonzini
2021-02-26 8:05 ` [PULL 06/29] scsi: allow user to set werror as report Paolo Bonzini
2021-02-26 8:05 ` [PULL 07/29] virtio-scsi: don't process IO on fenced dataplane Paolo Bonzini
2021-02-26 8:05 ` [PULL 08/29] scsi-disk: move scsi_handle_rw_error earlier Paolo Bonzini
2021-02-26 8:05 ` [PULL 09/29] scsi-disk: do not complete requests early for rerror/werror=ignore Paolo Bonzini
2021-02-26 8:05 ` Paolo Bonzini [this message]
2021-02-26 8:05 ` [PULL 11/29] scsi-disk: pass SCSI status to scsi_handle_rw_error Paolo Bonzini
2021-02-26 8:05 ` [PULL 12/29] scsi-disk: pass guest recoverable errors through even for rerror=stop Paolo Bonzini
2021-02-26 8:05 ` [PULL 13/29] scsi: drop 'result' argument from command_complete callback Paolo Bonzini
2021-02-26 8:05 ` [PULL 14/29] char: don't fail when client is not connected Paolo Bonzini
2021-02-26 8:05 ` [PULL 15/29] gdbstub: use preferred boolean option syntax Paolo Bonzini
2021-02-26 8:05 ` [PULL 16/29] qemu-options: update to show preferred boolean syntax for -chardev Paolo Bonzini
2021-02-26 8:05 ` [PULL 17/29] qemu-options: update to show preferred boolean syntax for -spice Paolo Bonzini
2021-02-26 8:05 ` [PULL 18/29] qemu-options: update to show preferred boolean syntax for -netdev Paolo Bonzini
2021-02-26 8:05 ` [PULL 19/29] qemu-options: update to show preferred boolean syntax for -incoming Paolo Bonzini
2021-02-26 8:05 ` [PULL 20/29] qemu-options: update to show preferred boolean syntax for -vnc Paolo Bonzini
2021-02-26 8:05 ` [PULL 21/29] docs: update to show preferred boolean syntax for -chardev Paolo Bonzini
2021-02-26 8:05 ` [PULL 22/29] docs: update to show preferred boolean syntax for -vnc Paolo Bonzini
2021-02-26 8:05 ` [PULL 23/29] docs: update to show preferred boolean syntax for -cpu Paolo Bonzini
2021-02-26 8:05 ` [PULL 24/29] target/i386: " Paolo Bonzini
2021-02-26 8:05 ` [PULL 25/29] qom/object.c: Fix typo Paolo Bonzini
2021-02-26 8:05 ` [PULL 26/29] target/i386: Add bus lock debug exception support Paolo Bonzini
2021-02-26 8:05 ` [PULL 27/29] vl: deprecate -writeconfig Paolo Bonzini
2021-03-01 8:00 ` Markus Armbruster
2021-03-01 10:09 ` Paolo Bonzini
2021-03-01 13:26 ` Markus Armbruster
2021-03-01 13:45 ` Paolo Bonzini
2021-03-01 14:54 ` Markus Armbruster
2021-03-01 15:05 ` Paolo Bonzini
2021-03-01 16:03 ` About '-readconfig' [Was: Re: [PULL 27/29] vl: deprecate -writeconfig] Kashyap Chamarthy
2021-03-01 16:24 ` Paolo Bonzini
2021-03-02 15:36 ` Kashyap Chamarthy
2021-02-26 8:05 ` [PULL 28/29] chardev: do not use short form boolean options in non-QemuOpts character device descriptions Paolo Bonzini
2021-02-26 8:05 ` [PULL 29/29] tcg/i386: rdpmc: fix the the condtions Paolo Bonzini
2021-02-26 8:51 ` [PULL 00/29] Misc patches for 2021-02-25 no-reply
2021-03-03 16:54 ` Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210226080526.651705-11-pbonzini@redhat.com \
--to=pbonzini@redhat.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).