From: Peter Maydell <peter.maydell@linaro.org>
To: qemu-devel@nongnu.org
Subject: [PULL 27/54] hw/arm/armsse: Move sysinfo register block into data-driven framework
Date: Mon, 8 Mar 2021 17:32:17 +0000 [thread overview]
Message-ID: <20210308173244.20710-28-peter.maydell@linaro.org> (raw)
In-Reply-To: <20210308173244.20710-1-peter.maydell@linaro.org>
Move the sysinfo register block into the data-driven framework.
While we are moving the code for configuring this device around,
regularize on using &error_abortw when setting the integer
properties: they are all simple DEFINE_PROP_UINT32 properties so the
setting can never fail.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210219144617.4782-28-peter.maydell@linaro.org
---
hw/arm/armsse.c | 47 ++++++++++++++++++++++++++++-------------------
1 file changed, 28 insertions(+), 19 deletions(-)
diff --git a/hw/arm/armsse.c b/hw/arm/armsse.c
index 3270362d599..91f30b1fdc4 100644
--- a/hw/arm/armsse.c
+++ b/hw/arm/armsse.c
@@ -157,6 +157,14 @@ static const ARMSSEDeviceInfo sse200_devices[] = {
.ppc = NO_PPC,
.irq = NMI_1,
},
+ {
+ .name = "armsse-sysinfo",
+ .type = TYPE_IOTKIT_SYSINFO,
+ .index = 0,
+ .addr = 0x40020000,
+ .ppc = NO_PPC,
+ .irq = NO_IRQ,
+ },
{
.name = NULL,
}
@@ -407,6 +415,10 @@ static void armsse_init(Object *obj)
object_initialize_child(obj, devinfo->name,
&s->cmsdk_watchdog[devinfo->index],
TYPE_CMSDK_APB_WATCHDOG);
+ } else if (!strcmp(devinfo->type, TYPE_IOTKIT_SYSINFO)) {
+ assert(devinfo->index == 0);
+ object_initialize_child(obj, devinfo->name, &s->sysinfo,
+ TYPE_IOTKIT_SYSINFO);
} else {
g_assert_not_reached();
}
@@ -437,8 +449,6 @@ static void armsse_init(Object *obj)
object_initialize_child(obj, "armsse-sysctl", &s->sysctl,
TYPE_IOTKIT_SYSCTL);
- object_initialize_child(obj, "armsse-sysinfo", &s->sysinfo,
- TYPE_IOTKIT_SYSINFO);
if (info->has_mhus) {
object_initialize_child(obj, "mhu0", &s->mhu[0], TYPE_ARMSSE_MHU);
object_initialize_child(obj, "mhu1", &s->mhu[1], TYPE_ARMSSE_MHU);
@@ -889,6 +899,22 @@ static void armsse_realize(DeviceState *dev, Error **errp)
return;
}
mr = sysbus_mmio_get_region(sbd, 0);
+ } else if (!strcmp(devinfo->type, TYPE_IOTKIT_SYSINFO)) {
+ sbd = SYS_BUS_DEVICE(&s->sysinfo);
+
+ object_property_set_int(OBJECT(&s->sysinfo), "SYS_VERSION",
+ info->sys_version, &error_abort);
+ object_property_set_int(OBJECT(&s->sysinfo), "SYS_CONFIG",
+ armsse_sys_config_value(s, info),
+ &error_abort);
+ object_property_set_int(OBJECT(&s->sysinfo), "sse-version",
+ info->sse_version, &error_abort);
+ object_property_set_int(OBJECT(&s->sysinfo), "IIDR",
+ info->iidr, &error_abort);
+ if (!sysbus_realize(sbd, errp)) {
+ return;
+ }
+ mr = sysbus_mmio_get_region(sbd, 0);
} else {
g_assert_not_reached();
}
@@ -1106,23 +1132,6 @@ static void armsse_realize(DeviceState *dev, Error **errp)
memory_region_add_subregion(&s->container, devinfo->addr, mr);
}
- if (!object_property_set_int(OBJECT(&s->sysinfo), "SYS_VERSION",
- info->sys_version, errp)) {
- return;
- }
- if (!object_property_set_int(OBJECT(&s->sysinfo), "SYS_CONFIG",
- armsse_sys_config_value(s, info), errp)) {
- return;
- }
- object_property_set_int(OBJECT(&s->sysinfo), "sse-version",
- info->sse_version, &error_abort);
- object_property_set_int(OBJECT(&s->sysinfo), "IIDR",
- info->iidr, &error_abort);
- if (!sysbus_realize(SYS_BUS_DEVICE(&s->sysinfo), errp)) {
- return;
- }
- /* System information registers */
- sysbus_mmio_map(SYS_BUS_DEVICE(&s->sysinfo), 0, 0x40020000);
/* System control registers */
object_property_set_int(OBJECT(&s->sysctl), "sse-version",
info->sse_version, &error_abort);
--
2.20.1
next prev parent reply other threads:[~2021-03-08 17:54 UTC|newest]
Thread overview: 56+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-08 17:31 [PULL 00/54] target-arm queue Peter Maydell
2021-03-08 17:31 ` [PULL 01/54] clock: Add ClockEvent parameter to callbacks Peter Maydell
2021-03-08 17:31 ` [PULL 02/54] clock: Add ClockPreUpdate callback event type Peter Maydell
2021-03-08 17:31 ` [PULL 03/54] clock: Add clock_ns_to_ticks() function Peter Maydell
2021-03-08 17:31 ` [PULL 04/54] hw/timer/npcm7xx_timer: Use new clock_ns_to_ticks() Peter Maydell
2021-03-08 17:31 ` [PULL 05/54] hw/arm/armsse: Introduce SSE subsystem version property Peter Maydell
2021-03-08 17:31 ` [PULL 06/54] hw/misc/iotkit-sysctl: Remove is_sse200 flag Peter Maydell
2021-03-08 17:31 ` [PULL 07/54] hw/misc/iotkit-secctl.c: Implement SSE-300 PID register values Peter Maydell
2021-03-08 17:31 ` [PULL 08/54] hw/misc/iotkit-sysinfo.c: " Peter Maydell
2021-03-08 17:31 ` [PULL 09/54] hw/arm/armsse.c: Use correct SYS_CONFIG0 register value for SSE-300 Peter Maydell
2021-03-08 17:32 ` [PULL 10/54] hw/misc/iotkit-sysinfo.c: Implement SYS_CONFIG1 and IIDR Peter Maydell
2021-03-08 17:32 ` [PULL 11/54] hw/timer/sse-counter: Model the SSE Subsystem System Counter Peter Maydell
2021-03-08 17:32 ` [PULL 12/54] hw/timer/sse-timer: Model the SSE Subsystem System Timer Peter Maydell
2021-03-08 17:32 ` [PULL 13/54] hw/misc/iotkit-sysctl: Add SSE-300 cases which match SSE-200 behaviour Peter Maydell
2021-03-08 17:32 ` [PULL 14/54] hw/misc/iotkit-sysctl: Handle CPU_WAIT, NMI_ENABLE for SSE-300 Peter Maydell
2021-03-08 17:32 ` [PULL 15/54] hw/misc/iotkit-sysctl: Handle INITSVTOR* " Peter Maydell
2021-03-08 17:32 ` [PULL 16/54] hw/misc/iotkit-sysctl: Implement dummy version of SSE-300 PWRCTRL register Peter Maydell
2021-03-08 17:32 ` [PULL 17/54] hw/misc/iotkit-sysctl: Handle SSE-300 changes to PDCM_PD_*_SENSE registers Peter Maydell
2021-03-08 17:32 ` [PULL 18/54] hw/misc/iotkit-sysctl: Implement SSE-200 and SSE-300 PID register values Peter Maydell
2021-03-08 17:32 ` [PULL 19/54] hw/arm/Kconfig: Move ARMSSE_CPUID and ARMSSE_MHU stanzas to hw/misc Peter Maydell
2021-03-08 17:32 ` [PULL 20/54] hw/misc/sse-cpu-pwrctrl: Implement SSE-300 CPU<N>_PWRCTRL register block Peter Maydell
2021-03-08 17:32 ` [PULL 21/54] hw/arm/armsse: Use an array for apb_ppc fields in the state structure Peter Maydell
2021-03-08 17:32 ` [PULL 22/54] hw/arm/armsse: Add a define for number of IRQs used by the SSE itself Peter Maydell
2021-03-08 17:32 ` [PULL 23/54] hw/arm/armsse: Add framework for data-driven device placement Peter Maydell
2021-03-08 17:32 ` [PULL 24/54] hw/arm/armsse: Move dual-timer device into data-driven framework Peter Maydell
2021-03-08 17:32 ` [PULL 25/54] hw/arm/armsse: Move watchdogs " Peter Maydell
2021-03-08 17:32 ` [PULL 26/54] hw/arm/armsse: Move s32ktimer " Peter Maydell
2021-03-08 17:32 ` Peter Maydell [this message]
2021-03-08 17:32 ` [PULL 28/54] hw/arm/armsse: Move sysctl register block " Peter Maydell
2021-03-08 17:32 ` [PULL 29/54] hw/arm/armsse: Move PPUs " Peter Maydell
2021-03-08 17:32 ` [PULL 30/54] hw/arm/armsse: Add missing SSE-200 SYS_PPU Peter Maydell
2021-03-08 17:32 ` [PULL 31/54] hw/arm/armsse: Indirect irq_is_common[] through ARMSSEInfo Peter Maydell
2021-03-08 17:32 ` [PULL 32/54] hw/arm/armsse: Add support for SSE variants with a system counter Peter Maydell
2021-03-08 17:32 ` [PULL 33/54] hw/arm/armsse: Add support for TYPE_SSE_TIMER in ARMSSEDeviceInfo Peter Maydell
2021-03-08 17:32 ` [PULL 34/54] hw/arm/armsse: Support variants with ARMSSE_CPU_PWRCTRL block Peter Maydell
2021-03-08 17:32 ` [PULL 35/54] hw/arm/armsse: Add SSE-300 support Peter Maydell
2021-03-08 17:32 ` [PULL 36/54] hw/arm/mps2-tz: Make UART overflow IRQ board-specific Peter Maydell
2021-03-08 17:32 ` [PULL 37/54] hw/misc/mps2-fpgaio: Fold counters subsection into main vmstate Peter Maydell
2021-03-08 17:32 ` [PULL 38/54] hw/misc/mps2-fpgaio: Support AN547 DBGCTRL register Peter Maydell
2021-03-08 17:32 ` [PULL 39/54] hw/misc/mps2-scc: Implement changes for AN547 Peter Maydell
2021-03-08 17:32 ` [PULL 40/54] hw/arm/mps2-tz: Support running APB peripherals on different clock Peter Maydell
2021-03-08 17:32 ` [PULL 41/54] hw/arm/mps2-tz: Make initsvtor0 setting board-specific Peter Maydell
2021-03-08 17:32 ` [PULL 42/54] hw/arm/mps2-tz: Add new mps3-an547 board Peter Maydell
2021-03-08 17:32 ` [PULL 43/54] docs/system/arm/mps2.rst: Document the " Peter Maydell
2021-03-08 17:32 ` [PULL 44/54] tests/qtest/sse-timer-test: Add simple test of the SSE counter Peter Maydell
2021-03-08 17:32 ` [PULL 45/54] tests/qtest/sse-timer-test: Test the system timer Peter Maydell
2021-03-08 17:32 ` [PULL 46/54] tests/qtest/sse-timer-test: Test counter scaling changes Peter Maydell
2021-03-08 17:32 ` [PULL 47/54] target/arm: Restrict v7A TCG cpus to TCG accel Peter Maydell
2021-03-08 17:32 ` [PULL 48/54] hw/dma: Implement a Xilinx CSU DMA model Peter Maydell
2021-03-08 17:32 ` [PULL 49/54] hw/arm: xlnx-zynqmp: Clean up coding convention issues Peter Maydell
2021-03-08 17:32 ` [PULL 50/54] hw/arm: xlnx-zynqmp: Connect a Xilinx CSU DMA module for QSPI Peter Maydell
2021-03-08 17:32 ` [PULL 51/54] hw/ssi: xilinx_spips: Clean up coding convention issues Peter Maydell
2021-03-08 17:32 ` [PULL 52/54] hw/ssi: xilinx_spips: Remove DMA related dead codes from zynqmp_spips Peter Maydell
2021-03-08 17:32 ` [PULL 53/54] hw/timer/renesas_tmr: Prefix constants for CSS values with CSS_ Peter Maydell
2021-03-08 17:32 ` [PULL 54/54] hw/timer/renesas_tmr: Fix use of uninitialized data in read_tcnt() Peter Maydell
2021-03-08 18:49 ` [PULL 00/54] target-arm queue no-reply
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210308173244.20710-28-peter.maydell@linaro.org \
--to=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).