From: Peter Maydell <peter.maydell@linaro.org>
To: qemu-devel@nongnu.org
Subject: [PULL 39/54] hw/misc/mps2-scc: Implement changes for AN547
Date: Mon, 8 Mar 2021 17:32:29 +0000 [thread overview]
Message-ID: <20210308173244.20710-40-peter.maydell@linaro.org> (raw)
In-Reply-To: <20210308173244.20710-1-peter.maydell@linaro.org>
Implement the minor changes required to the SCC block for AN547 images:
* CFG2 and CFG5 exist (like AN524)
* CFG3 is reserved (like AN524)
* CFG0 bit 1 is CPU_WAIT; we don't implement it, but note this
in the TODO comment
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210219144617.4782-40-peter.maydell@linaro.org
---
hw/misc/mps2-scc.c | 15 +++++++++------
1 file changed, 9 insertions(+), 6 deletions(-)
diff --git a/hw/misc/mps2-scc.c b/hw/misc/mps2-scc.c
index 140a4b9ceba..c56aca86ad5 100644
--- a/hw/misc/mps2-scc.c
+++ b/hw/misc/mps2-scc.c
@@ -110,14 +110,14 @@ static uint64_t mps2_scc_read(void *opaque, hwaddr offset, unsigned size)
r = s->cfg1;
break;
case A_CFG2:
- if (scc_partno(s) != 0x524) {
+ if (scc_partno(s) != 0x524 && scc_partno(s) != 0x547) {
/* CFG2 reserved on other boards */
goto bad_offset;
}
r = s->cfg2;
break;
case A_CFG3:
- if (scc_partno(s) == 0x524) {
+ if (scc_partno(s) == 0x524 && scc_partno(s) == 0x547) {
/* CFG3 reserved on AN524 */
goto bad_offset;
}
@@ -130,7 +130,7 @@ static uint64_t mps2_scc_read(void *opaque, hwaddr offset, unsigned size)
r = s->cfg4;
break;
case A_CFG5:
- if (scc_partno(s) != 0x524) {
+ if (scc_partno(s) != 0x524 && scc_partno(s) != 0x547) {
/* CFG5 reserved on other boards */
goto bad_offset;
}
@@ -185,7 +185,10 @@ static void mps2_scc_write(void *opaque, hwaddr offset, uint64_t value,
switch (offset) {
case A_CFG0:
- /* TODO on some boards bit 0 controls RAM remapping */
+ /*
+ * TODO on some boards bit 0 controls RAM remapping;
+ * on others bit 1 is CPU_WAIT.
+ */
s->cfg0 = value;
break;
case A_CFG1:
@@ -195,7 +198,7 @@ static void mps2_scc_write(void *opaque, hwaddr offset, uint64_t value,
}
break;
case A_CFG2:
- if (scc_partno(s) != 0x524) {
+ if (scc_partno(s) != 0x524 && scc_partno(s) != 0x547) {
/* CFG2 reserved on other boards */
goto bad_offset;
}
@@ -203,7 +206,7 @@ static void mps2_scc_write(void *opaque, hwaddr offset, uint64_t value,
s->cfg2 = value;
break;
case A_CFG5:
- if (scc_partno(s) != 0x524) {
+ if (scc_partno(s) != 0x524 && scc_partno(s) != 0x547) {
/* CFG5 reserved on other boards */
goto bad_offset;
}
--
2.20.1
next prev parent reply other threads:[~2021-03-08 18:23 UTC|newest]
Thread overview: 56+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-08 17:31 [PULL 00/54] target-arm queue Peter Maydell
2021-03-08 17:31 ` [PULL 01/54] clock: Add ClockEvent parameter to callbacks Peter Maydell
2021-03-08 17:31 ` [PULL 02/54] clock: Add ClockPreUpdate callback event type Peter Maydell
2021-03-08 17:31 ` [PULL 03/54] clock: Add clock_ns_to_ticks() function Peter Maydell
2021-03-08 17:31 ` [PULL 04/54] hw/timer/npcm7xx_timer: Use new clock_ns_to_ticks() Peter Maydell
2021-03-08 17:31 ` [PULL 05/54] hw/arm/armsse: Introduce SSE subsystem version property Peter Maydell
2021-03-08 17:31 ` [PULL 06/54] hw/misc/iotkit-sysctl: Remove is_sse200 flag Peter Maydell
2021-03-08 17:31 ` [PULL 07/54] hw/misc/iotkit-secctl.c: Implement SSE-300 PID register values Peter Maydell
2021-03-08 17:31 ` [PULL 08/54] hw/misc/iotkit-sysinfo.c: " Peter Maydell
2021-03-08 17:31 ` [PULL 09/54] hw/arm/armsse.c: Use correct SYS_CONFIG0 register value for SSE-300 Peter Maydell
2021-03-08 17:32 ` [PULL 10/54] hw/misc/iotkit-sysinfo.c: Implement SYS_CONFIG1 and IIDR Peter Maydell
2021-03-08 17:32 ` [PULL 11/54] hw/timer/sse-counter: Model the SSE Subsystem System Counter Peter Maydell
2021-03-08 17:32 ` [PULL 12/54] hw/timer/sse-timer: Model the SSE Subsystem System Timer Peter Maydell
2021-03-08 17:32 ` [PULL 13/54] hw/misc/iotkit-sysctl: Add SSE-300 cases which match SSE-200 behaviour Peter Maydell
2021-03-08 17:32 ` [PULL 14/54] hw/misc/iotkit-sysctl: Handle CPU_WAIT, NMI_ENABLE for SSE-300 Peter Maydell
2021-03-08 17:32 ` [PULL 15/54] hw/misc/iotkit-sysctl: Handle INITSVTOR* " Peter Maydell
2021-03-08 17:32 ` [PULL 16/54] hw/misc/iotkit-sysctl: Implement dummy version of SSE-300 PWRCTRL register Peter Maydell
2021-03-08 17:32 ` [PULL 17/54] hw/misc/iotkit-sysctl: Handle SSE-300 changes to PDCM_PD_*_SENSE registers Peter Maydell
2021-03-08 17:32 ` [PULL 18/54] hw/misc/iotkit-sysctl: Implement SSE-200 and SSE-300 PID register values Peter Maydell
2021-03-08 17:32 ` [PULL 19/54] hw/arm/Kconfig: Move ARMSSE_CPUID and ARMSSE_MHU stanzas to hw/misc Peter Maydell
2021-03-08 17:32 ` [PULL 20/54] hw/misc/sse-cpu-pwrctrl: Implement SSE-300 CPU<N>_PWRCTRL register block Peter Maydell
2021-03-08 17:32 ` [PULL 21/54] hw/arm/armsse: Use an array for apb_ppc fields in the state structure Peter Maydell
2021-03-08 17:32 ` [PULL 22/54] hw/arm/armsse: Add a define for number of IRQs used by the SSE itself Peter Maydell
2021-03-08 17:32 ` [PULL 23/54] hw/arm/armsse: Add framework for data-driven device placement Peter Maydell
2021-03-08 17:32 ` [PULL 24/54] hw/arm/armsse: Move dual-timer device into data-driven framework Peter Maydell
2021-03-08 17:32 ` [PULL 25/54] hw/arm/armsse: Move watchdogs " Peter Maydell
2021-03-08 17:32 ` [PULL 26/54] hw/arm/armsse: Move s32ktimer " Peter Maydell
2021-03-08 17:32 ` [PULL 27/54] hw/arm/armsse: Move sysinfo register block " Peter Maydell
2021-03-08 17:32 ` [PULL 28/54] hw/arm/armsse: Move sysctl " Peter Maydell
2021-03-08 17:32 ` [PULL 29/54] hw/arm/armsse: Move PPUs " Peter Maydell
2021-03-08 17:32 ` [PULL 30/54] hw/arm/armsse: Add missing SSE-200 SYS_PPU Peter Maydell
2021-03-08 17:32 ` [PULL 31/54] hw/arm/armsse: Indirect irq_is_common[] through ARMSSEInfo Peter Maydell
2021-03-08 17:32 ` [PULL 32/54] hw/arm/armsse: Add support for SSE variants with a system counter Peter Maydell
2021-03-08 17:32 ` [PULL 33/54] hw/arm/armsse: Add support for TYPE_SSE_TIMER in ARMSSEDeviceInfo Peter Maydell
2021-03-08 17:32 ` [PULL 34/54] hw/arm/armsse: Support variants with ARMSSE_CPU_PWRCTRL block Peter Maydell
2021-03-08 17:32 ` [PULL 35/54] hw/arm/armsse: Add SSE-300 support Peter Maydell
2021-03-08 17:32 ` [PULL 36/54] hw/arm/mps2-tz: Make UART overflow IRQ board-specific Peter Maydell
2021-03-08 17:32 ` [PULL 37/54] hw/misc/mps2-fpgaio: Fold counters subsection into main vmstate Peter Maydell
2021-03-08 17:32 ` [PULL 38/54] hw/misc/mps2-fpgaio: Support AN547 DBGCTRL register Peter Maydell
2021-03-08 17:32 ` Peter Maydell [this message]
2021-03-08 17:32 ` [PULL 40/54] hw/arm/mps2-tz: Support running APB peripherals on different clock Peter Maydell
2021-03-08 17:32 ` [PULL 41/54] hw/arm/mps2-tz: Make initsvtor0 setting board-specific Peter Maydell
2021-03-08 17:32 ` [PULL 42/54] hw/arm/mps2-tz: Add new mps3-an547 board Peter Maydell
2021-03-08 17:32 ` [PULL 43/54] docs/system/arm/mps2.rst: Document the " Peter Maydell
2021-03-08 17:32 ` [PULL 44/54] tests/qtest/sse-timer-test: Add simple test of the SSE counter Peter Maydell
2021-03-08 17:32 ` [PULL 45/54] tests/qtest/sse-timer-test: Test the system timer Peter Maydell
2021-03-08 17:32 ` [PULL 46/54] tests/qtest/sse-timer-test: Test counter scaling changes Peter Maydell
2021-03-08 17:32 ` [PULL 47/54] target/arm: Restrict v7A TCG cpus to TCG accel Peter Maydell
2021-03-08 17:32 ` [PULL 48/54] hw/dma: Implement a Xilinx CSU DMA model Peter Maydell
2021-03-08 17:32 ` [PULL 49/54] hw/arm: xlnx-zynqmp: Clean up coding convention issues Peter Maydell
2021-03-08 17:32 ` [PULL 50/54] hw/arm: xlnx-zynqmp: Connect a Xilinx CSU DMA module for QSPI Peter Maydell
2021-03-08 17:32 ` [PULL 51/54] hw/ssi: xilinx_spips: Clean up coding convention issues Peter Maydell
2021-03-08 17:32 ` [PULL 52/54] hw/ssi: xilinx_spips: Remove DMA related dead codes from zynqmp_spips Peter Maydell
2021-03-08 17:32 ` [PULL 53/54] hw/timer/renesas_tmr: Prefix constants for CSS values with CSS_ Peter Maydell
2021-03-08 17:32 ` [PULL 54/54] hw/timer/renesas_tmr: Fix use of uninitialized data in read_tcnt() Peter Maydell
2021-03-08 18:49 ` [PULL 00/54] target-arm queue no-reply
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210308173244.20710-40-peter.maydell@linaro.org \
--to=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).