[PULL 41/54] hw/arm/mps2-tz: Make initsvtor0 setting board-specific

[Peter Maydell <peter.maydell@linaro.org>]

The AN547 configures the SSE-300 with a different initsvtor0
setting from its default; make this a board-specific setting.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210219144617.4782-42-peter.maydell@linaro.org
---
 hw/arm/mps2-tz.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/hw/arm/mps2-tz.c b/hw/arm/mps2-tz.c
index f25a4ac0929..0a1e6c20c21 100644
--- a/hw/arm/mps2-tz.c
+++ b/hw/arm/mps2-tz.c
@@ -114,6 +114,7 @@ struct MPS2TZMachineClass {
     bool fpgaio_has_dbgctrl; /* Does FPGAIO have DBGCTRL register? */
     int numirq; /* Number of external interrupts */
     int uart_overflow_irq; /* number of the combined UART overflow IRQ */
+    uint32_t init_svtor; /* init-svtor setting for SSE */
     const RAMInfo *raminfo;
     const char *armsse_type;
 };
@@ -700,6 +701,7 @@ static void mps2tz_common_init(MachineState *machine)
     object_property_set_link(OBJECT(&mms->iotkit), "memory",
                              OBJECT(system_memory), &error_abort);
     qdev_prop_set_uint32(iotkitdev, "EXP_NUMIRQ", mmc->numirq);
+    qdev_prop_set_uint32(iotkitdev, "init-svtor", mmc->init_svtor);
     qdev_connect_clock_in(iotkitdev, "MAINCLK", mms->sysclk);
     qdev_connect_clock_in(iotkitdev, "S32KCLK", mms->s32kclk);
     sysbus_realize(SYS_BUS_DEVICE(&mms->iotkit), &error_fatal);
@@ -1053,6 +1055,7 @@ static void mps2tz_an505_class_init(ObjectClass *oc, void *data)
     mmc->fpgaio_has_dbgctrl = false;
     mmc->numirq = 92;
     mmc->uart_overflow_irq = 47;
+    mmc->init_svtor = 0x10000000;
     mmc->raminfo = an505_raminfo;
     mmc->armsse_type = TYPE_IOTKIT;
     mps2tz_set_default_ram_info(mmc);
@@ -1079,6 +1082,7 @@ static void mps2tz_an521_class_init(ObjectClass *oc, void *data)
     mmc->fpgaio_has_dbgctrl = false;
     mmc->numirq = 92;
     mmc->uart_overflow_irq = 47;
+    mmc->init_svtor = 0x10000000;
     mmc->raminfo = an505_raminfo; /* AN521 is the same as AN505 here */
     mmc->armsse_type = TYPE_SSE200;
     mps2tz_set_default_ram_info(mmc);
@@ -1105,6 +1109,7 @@ static void mps3tz_an524_class_init(ObjectClass *oc, void *data)
     mmc->fpgaio_has_dbgctrl = false;
     mmc->numirq = 95;
     mmc->uart_overflow_irq = 47;
+    mmc->init_svtor = 0x10000000;
     mmc->raminfo = an524_raminfo;
     mmc->armsse_type = TYPE_SSE200;
     mps2tz_set_default_ram_info(mmc);
-- 
2.20.1