[PULL 51/54] hw/ssi: xilinx_spips: Clean up coding convention issues

[Peter Maydell <peter.maydell@linaro.org>]

From: Xuzhou Cheng <xuzhou.cheng@windriver.com>

There are some coding convention warnings in xilinx_spips.c,
as reported by:

  $ ./scripts/checkpatch.pl hw/ssi/xilinx_spips.c

Let's clean them up.

Signed-off-by: Xuzhou Cheng <xuzhou.cheng@windriver.com>
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20210303135254.3970-5-bmeng.cn@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/ssi/xilinx_spips.c | 23 ++++++++++++++---------
 1 file changed, 14 insertions(+), 9 deletions(-)

diff --git a/hw/ssi/xilinx_spips.c b/hw/ssi/xilinx_spips.c
index a8970346017..8a0cc22d42e 100644
--- a/hw/ssi/xilinx_spips.c
+++ b/hw/ssi/xilinx_spips.c
@@ -176,7 +176,8 @@
     FIELD(GQSPI_FIFO_CTRL, GENERIC_FIFO_RESET, 0, 1)
 #define R_GQSPI_GFIFO_THRESH    (0x150 / 4)
 #define R_GQSPI_DATA_STS (0x15c / 4)
-/* We use the snapshot register to hold the core state for the currently
+/*
+ * We use the snapshot register to hold the core state for the currently
  * or most recently executed command. So the generic fifo format is defined
  * for the snapshot register
  */
@@ -424,7 +425,8 @@ static void xlnx_zynqmp_qspips_reset(DeviceState *d)
     xlnx_zynqmp_qspips_update_ixr(s);
 }
 
-/* N way (num) in place bit striper. Lay out row wise bits (MSB to LSB)
+/*
+ * N way (num) in place bit striper. Lay out row wise bits (MSB to LSB)
  * column wise (from element 0 to N-1). num is the length of x, and dir
  * reverses the direction of the transform. Best illustrated by example:
  * Each digit in the below array is a single bit (num == 3):
@@ -637,8 +639,10 @@ static void xilinx_spips_flush_txfifo(XilinxSPIPS *s)
                 tx_rx[i] = tx;
             }
         } else {
-            /* Extract a dummy byte and generate dummy cycles according to the
-             * link state */
+            /*
+             * Extract a dummy byte and generate dummy cycles according to the
+             * link state
+             */
             tx = fifo8_pop(&s->tx_fifo);
             dummy_cycles = 8 / s->link_state;
         }
@@ -721,8 +725,9 @@ static void xilinx_spips_flush_txfifo(XilinxSPIPS *s)
             }
             break;
         case (SNOOP_ADDR):
-            /* Address has been transmitted, transmit dummy cycles now if
-             * needed */
+            /*
+             * Address has been transmitted, transmit dummy cycles now if needed
+             */
             if (s->cmd_dummies < 0) {
                 s->snoop_state = SNOOP_NONE;
             } else {
@@ -876,7 +881,7 @@ static void xlnx_zynqmp_qspips_notify(void *opaque)
 }
 
 static uint64_t xilinx_spips_read(void *opaque, hwaddr addr,
-                                                        unsigned size)
+                                  unsigned size)
 {
     XilinxSPIPS *s = opaque;
     uint32_t mask = ~0;
@@ -970,7 +975,7 @@ static uint64_t xlnx_zynqmp_qspips_read(void *opaque,
 }
 
 static void xilinx_spips_write(void *opaque, hwaddr addr,
-                                        uint64_t value, unsigned size)
+                               uint64_t value, unsigned size)
 {
     int mask = ~0;
     XilinxSPIPS *s = opaque;
@@ -1072,7 +1077,7 @@ static void xilinx_qspips_write(void *opaque, hwaddr addr,
 }
 
 static void xlnx_zynqmp_qspips_write(void *opaque, hwaddr addr,
-                                        uint64_t value, unsigned size)
+                                     uint64_t value, unsigned size)
 {
     XlnxZynqMPQSPIPS *s = XLNX_ZYNQMP_QSPIPS(opaque);
     uint32_t reg = addr / 4;
-- 
2.20.1