From: Richard Henderson <richard.henderson@linaro.org>
To: qemu-devel@nongnu.org
Cc: ivan@vmfacility.fr, qemu-ppc@nongnu.org, david@gibson.dropbear.id.au
Subject: [PATCH v3 16/16] target/ppc: Validate hflags with CONFIG_DEBUG_TCG
Date: Sun, 14 Mar 2021 11:59:06 -0600 [thread overview]
Message-ID: <20210314175906.1733746-17-richard.henderson@linaro.org> (raw)
In-Reply-To: <20210314175906.1733746-1-richard.henderson@linaro.org>
Verify that hflags was updated correctly whenever we change
cpu state that is used by hflags.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
target/ppc/cpu.h | 5 +++++
target/ppc/helper_regs.c | 29 +++++++++++++++++++++++++++--
2 files changed, 32 insertions(+), 2 deletions(-)
diff --git a/target/ppc/cpu.h b/target/ppc/cpu.h
index 2f8d7fa13c..7ee5c9a66e 100644
--- a/target/ppc/cpu.h
+++ b/target/ppc/cpu.h
@@ -2424,6 +2424,10 @@ void cpu_write_xer(CPUPPCState *env, target_ulong xer);
*/
#define is_book3s_arch2x(ctx) (!!((ctx)->insns_flags & PPC_SEGMENT_64B))
+#ifdef CONFIG_DEBUG_TCG
+void cpu_get_tb_cpu_state(CPUPPCState *env, target_ulong *pc,
+ target_ulong *cs_base, uint32_t *flags);
+#else
static inline void cpu_get_tb_cpu_state(CPUPPCState *env, target_ulong *pc,
target_ulong *cs_base, uint32_t *flags)
{
@@ -2431,6 +2435,7 @@ static inline void cpu_get_tb_cpu_state(CPUPPCState *env, target_ulong *pc,
*cs_base = 0;
*flags = env->hflags;
}
+#endif
void QEMU_NORETURN raise_exception(CPUPPCState *env, uint32_t exception);
void QEMU_NORETURN raise_exception_ra(CPUPPCState *env, uint32_t exception,
diff --git a/target/ppc/helper_regs.c b/target/ppc/helper_regs.c
index b28037ca24..9df1098fec 100644
--- a/target/ppc/helper_regs.c
+++ b/target/ppc/helper_regs.c
@@ -43,7 +43,7 @@ void hreg_swap_gpr_tgpr(CPUPPCState *env)
env->tgpr[3] = tmp;
}
-void hreg_compute_hflags(CPUPPCState *env)
+static uint32_t hreg_compute_hflags_value(CPUPPCState *env)
{
target_ulong msr = env->msr;
uint32_t ppc_flags = env->flags;
@@ -147,9 +147,34 @@ void hreg_compute_hflags(CPUPPCState *env)
hflags |= dmmu_idx << HFLAGS_DMMU_IDX;
#endif
- env->hflags = hflags | (msr & msr_mask);
+ return hflags | (msr & msr_mask);
}
+void hreg_compute_hflags(CPUPPCState *env)
+{
+ env->hflags = hreg_compute_hflags_value(env);
+}
+
+#ifdef CONFIG_DEBUG_TCG
+void cpu_get_tb_cpu_state(CPUPPCState *env, target_ulong *pc,
+ target_ulong *cs_base, uint32_t *flags)
+{
+ uint32_t hflags_current = env->hflags;
+ uint32_t hflags_rebuilt;
+
+ *pc = env->nip;
+ *cs_base = 0;
+ *flags = hflags_current;
+
+ hflags_rebuilt = hreg_compute_hflags_value(env);
+ if (unlikely(hflags_current != hflags_rebuilt)) {
+ cpu_abort(env_cpu(env),
+ "TCG hflags mismatch (current:0x%08x rebuilt:0x%08x)\n",
+ hflags_current, hflags_rebuilt);
+ }
+}
+#endif
+
void cpu_interrupt_exittb(CPUState *cs)
{
if (!kvm_enabled()) {
--
2.25.1
prev parent reply other threads:[~2021-03-14 18:20 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-14 17:58 [PATCH v3 00/16] target/ppc: Fix truncation of env->hflags Richard Henderson
2021-03-14 17:58 ` [PATCH v3 01/16] target/ppc: Move helper_regs.h functions out-of-line Richard Henderson
2021-03-14 17:58 ` [PATCH v3 02/16] target/ppc: Move 601 hflags adjustment to hreg_compute_hflags Richard Henderson
2021-03-14 17:58 ` [PATCH v3 03/16] target/ppc: Properly sync cpu state with new msr in cpu_load_old Richard Henderson
2021-03-14 17:58 ` [PATCH v3 04/16] target/ppc: Do not call hreg_compute_mem_idx after ppc_store_msr Richard Henderson
2021-03-14 17:58 ` [PATCH v3 05/16] target/ppc: Retain hflags_nmsr only for migration Richard Henderson
2021-03-14 17:58 ` [PATCH v3 06/16] target/ppc: Fix comment for MSR_FE{0,1} Richard Henderson
2021-03-14 17:58 ` [PATCH v3 07/16] target/ppc: Disconnect hflags from MSR Richard Henderson
2021-03-14 17:58 ` [PATCH v3 08/16] target/ppc: Reduce env->hflags to uint32_t Richard Henderson
2021-03-14 17:58 ` [PATCH v3 09/16] target/ppc: Put dbcr0 single-step bits into hflags Richard Henderson
2021-03-14 17:59 ` [PATCH v3 10/16] target/ppc: Create helper_scv Richard Henderson
2021-03-14 17:59 ` [PATCH v3 11/16] target/ppc: Put LPCR[GTSE] in hflags Richard Henderson
2021-03-14 17:59 ` [PATCH v3 12/16] target/ppc: Remove MSR_SA and MSR_AP from hflags Richard Henderson
2021-03-14 17:59 ` [PATCH v3 13/16] target/ppc: Remove env->immu_idx and env->dmmu_idx Richard Henderson
2021-03-14 17:59 ` [PATCH v3 14/16] hw/ppc: Use hreg_store_msr for msr updates Richard Henderson
2021-03-15 10:23 ` Cédric Le Goater
2021-03-15 13:47 ` Richard Henderson
2021-03-15 13:55 ` Cédric Le Goater
2021-03-14 17:59 ` [PATCH v3 15/16] linux-user/ppc: Fix " Richard Henderson
2021-03-14 17:59 ` Richard Henderson [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210314175906.1733746-17-richard.henderson@linaro.org \
--to=richard.henderson@linaro.org \
--cc=david@gibson.dropbear.id.au \
--cc=ivan@vmfacility.fr \
--cc=qemu-devel@nongnu.org \
--cc=qemu-ppc@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).