[PULL 06/11] hw/block/pflash_cfi02: Rename register_memory(true) as mode_read_array

["Philippe Mathieu-Daudé" <philmd@redhat.com>]

The same pattern is used when setting the flash in READ_ARRAY mode:
- Set the state machine command to READ_ARRAY
- Reset the write_cycle counter
- Reset the memory region in ROMD

Refactor the current code by extracting this pattern.
It is used three times:

- When the timer expires and not in bypass mode

- On a read access (on invalid command).

- When the device is initialized. Here the ROMD mode is hidden
  by the memory_region_init_rom_device() call.

pflash_register_memory(rom_mode=true) already sets the ROM device
in "read array" mode (from I/O device to ROM one). Explicit that
by renaming the function as pflash_mode_read_array(), adding
a trace event and resetting wcycle.

Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: David Edmondson <david.edmondson@oracle.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210310170528.1184868-7-philmd@redhat.com>
---
 hw/block/pflash_cfi02.c | 18 +++++++++---------
 hw/block/trace-events   |  1 +
 2 files changed, 10 insertions(+), 9 deletions(-)

diff --git a/hw/block/pflash_cfi02.c b/hw/block/pflash_cfi02.c
index 897b7333222..2ba77a0171b 100644
--- a/hw/block/pflash_cfi02.c
+++ b/hw/block/pflash_cfi02.c
@@ -184,10 +184,13 @@ static void pflash_setup_mappings(PFlashCFI02 *pfl)
     pfl->rom_mode = true;
 }
 
-static void pflash_register_memory(PFlashCFI02 *pfl, int rom_mode)
+static void pflash_mode_read_array(PFlashCFI02 *pfl)
 {
-    memory_region_rom_device_set_romd(&pfl->orig_mem, rom_mode);
-    pfl->rom_mode = !!rom_mode;
+    trace_pflash_mode_read_array();
+    pfl->cmd = 0x00;
+    pfl->wcycle = 0;
+    pfl->rom_mode = true;
+    memory_region_rom_device_set_romd(&pfl->orig_mem, true);
 }
 
 static size_t pflash_regions_count(PFlashCFI02 *pfl)
@@ -249,11 +252,10 @@ static void pflash_timer(void *opaque)
     toggle_dq7(pfl);
     if (pfl->bypass) {
         pfl->wcycle = 2;
+        pfl->cmd = 0;
     } else {
-        pflash_register_memory(pfl, 1);
-        pfl->wcycle = 0;
+        pflash_mode_read_array(pfl);
     }
-    pfl->cmd = 0;
 }
 
 /*
@@ -315,7 +317,7 @@ static uint64_t pflash_read(void *opaque, hwaddr offset, unsigned int width)
     /* Lazy reset to ROMD mode after a certain amount of read accesses */
     if (!pfl->rom_mode && pfl->wcycle == 0 &&
         ++pfl->read_counter > PFLASH_LAZY_ROMD_THRESHOLD) {
-        pflash_register_memory(pfl, 1);
+        pflash_mode_read_array(pfl);
     }
     offset &= pfl->chip_len - 1;
     boff = offset & 0xFF;
@@ -933,8 +935,6 @@ static void pflash_cfi02_realize(DeviceState *dev, Error **errp)
     sysbus_init_mmio(SYS_BUS_DEVICE(dev), &pfl->mem);
 
     timer_init_ns(&pfl->timer, QEMU_CLOCK_VIRTUAL, pflash_timer, pfl);
-    pfl->wcycle = 0;
-    pfl->cmd = 0;
     pfl->status = 0;
 
     pflash_cfi02_fill_cfi_table(pfl, nb_regions);
diff --git a/hw/block/trace-events b/hw/block/trace-events
index ef06d2ea747..6d0c43f9977 100644
--- a/hw/block/trace-events
+++ b/hw/block/trace-events
@@ -7,6 +7,7 @@ fdc_ioport_write(uint8_t reg, uint8_t value) "write reg 0x%02x val 0x%02x"
 # pflash_cfi01.c
 # pflash_cfi02.c
 pflash_reset(void) "reset"
+pflash_mode_read_array(void) "mode: read array"
 pflash_timer_expired(uint8_t cmd) "command 0x%02x done"
 pflash_io_read(uint64_t offset, unsigned size, uint32_t value, uint8_t cmd, uint8_t wcycle) "offset:0x%04"PRIx64" size:%u value:0x%04x cmd:0x%02x wcycle:%u"
 pflash_io_write(uint64_t offset, unsigned size, uint32_t value, uint8_t wcycle) "offset:0x%04"PRIx64" size:%u value:0x%04x wcycle:%u"
-- 
2.26.2