From: "Michael S. Tsirkin" <mst@redhat.com>
To: qemu-devel@nongnu.org
Cc: Peter Maydell <peter.maydell@linaro.org>,
Igor Mammedov <imammedo@redhat.com>
Subject: [PULL v2 11/19] pci: acpi: ensure that acpi-index is unique
Date: Mon, 22 Mar 2021 19:00:18 -0400 [thread overview]
Message-ID: <20210322225907.541943-12-mst@redhat.com> (raw)
In-Reply-To: <20210322225907.541943-1-mst@redhat.com>
From: Igor Mammedov <imammedo@redhat.com>
it helps to avoid device naming conflicts when guest OS is
configured to use acpi-index for naming.
Spec ialso says so:
PCI Firmware Specification Revision 3.2
4.6.7. _DSM for Naming a PCI or PCI Express Device Under Operating Systems
"
Instance number must be unique under \_SB scope. This instance number does not have to
be sequential in a given system configuration.
"
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20210315180102.3008391-4-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
---
hw/acpi/pcihp.c | 46 ++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 46 insertions(+)
diff --git a/hw/acpi/pcihp.c b/hw/acpi/pcihp.c
index ceab287bd3..f4cb3c979d 100644
--- a/hw/acpi/pcihp.c
+++ b/hw/acpi/pcihp.c
@@ -52,6 +52,21 @@ typedef struct AcpiPciHpFind {
PCIBus *bus;
} AcpiPciHpFind;
+static gint g_cmp_uint32(gconstpointer a, gconstpointer b, gpointer user_data)
+{
+ return a - b;
+}
+
+static GSequence *pci_acpi_index_list(void)
+{
+ static GSequence *used_acpi_index_list;
+
+ if (!used_acpi_index_list) {
+ used_acpi_index_list = g_sequence_new(NULL);
+ }
+ return used_acpi_index_list;
+}
+
static int acpi_pcihp_get_bsel(PCIBus *bus)
{
Error *local_err = NULL;
@@ -277,6 +292,23 @@ void acpi_pcihp_device_pre_plug_cb(HotplugHandler *hotplug_dev,
ONBOARD_INDEX_MAX);
return;
}
+
+ /*
+ * make sure that acpi-index is unique across all present PCI devices
+ */
+ if (pdev->acpi_index) {
+ GSequence *used_indexes = pci_acpi_index_list();
+
+ if (g_sequence_lookup(used_indexes, GINT_TO_POINTER(pdev->acpi_index),
+ g_cmp_uint32, NULL)) {
+ error_setg(errp, "a PCI device with acpi-index = %" PRIu32
+ " already exist", pdev->acpi_index);
+ return;
+ }
+ g_sequence_insert_sorted(used_indexes,
+ GINT_TO_POINTER(pdev->acpi_index),
+ g_cmp_uint32, NULL);
+ }
}
void acpi_pcihp_device_plug_cb(HotplugHandler *hotplug_dev, AcpiPciHpState *s,
@@ -315,8 +347,22 @@ void acpi_pcihp_device_plug_cb(HotplugHandler *hotplug_dev, AcpiPciHpState *s,
void acpi_pcihp_device_unplug_cb(HotplugHandler *hotplug_dev, AcpiPciHpState *s,
DeviceState *dev, Error **errp)
{
+ PCIDevice *pdev = PCI_DEVICE(dev);
+
trace_acpi_pci_unplug(PCI_SLOT(PCI_DEVICE(dev)->devfn),
acpi_pcihp_get_bsel(pci_get_bus(PCI_DEVICE(dev))));
+
+ /*
+ * clean up acpi-index so it could reused by another device
+ */
+ if (pdev->acpi_index) {
+ GSequence *used_indexes = pci_acpi_index_list();
+
+ g_sequence_remove(g_sequence_lookup(used_indexes,
+ GINT_TO_POINTER(pdev->acpi_index),
+ g_cmp_uint32, NULL));
+ }
+
qdev_unrealize(dev);
}
--
MST
next prev parent reply other threads:[~2021-03-22 23:11 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-22 22:59 [PULL v2 00/19] pc,virtio,pci: fixes, features Michael S. Tsirkin
2021-03-22 22:59 ` [PULL v2 01/19] virtio: Fix virtio_mmio_read()/virtio_mmio_write() Michael S. Tsirkin
2021-03-22 22:59 ` [PULL v2 02/19] vhost-user: Drop misleading EAGAIN checks in slave_read() Michael S. Tsirkin
2021-03-22 22:59 ` [PULL v2 03/19] vhost-user: Fix double-close on slave_read() error path Michael S. Tsirkin
2021-03-22 23:00 ` [PULL v2 04/19] vhost-user: Factor out duplicated slave_fd teardown code Michael S. Tsirkin
2021-03-22 23:00 ` [PULL v2 05/19] vhost-user: Convert slave channel to QIOChannelSocket Michael S. Tsirkin
2021-03-22 23:00 ` [PULL v2 06/19] vhost-user: Introduce nested event loop in vhost_user_read() Michael S. Tsirkin
2021-03-22 23:00 ` [PULL v2 07/19] vhost-user: Monitor slave channel " Michael S. Tsirkin
2021-03-22 23:00 ` [PULL v2 08/19] virtio-pmem: fix virtio_pmem_resp assign problem Michael S. Tsirkin
2021-03-22 23:00 ` [PULL v2 09/19] tests: acpi: temporary whitelist DSDT changes Michael S. Tsirkin
2021-03-22 23:00 ` [PULL v2 10/19] pci: introduce acpi-index property for PCI device Michael S. Tsirkin
2021-03-22 23:00 ` Michael S. Tsirkin [this message]
2021-04-06 14:54 ` [PULL v2 11/19] pci: acpi: ensure that acpi-index is unique Daniel P. Berrangé
2021-04-06 15:07 ` Daniel P. Berrangé
2021-04-06 18:15 ` Igor Mammedov
2021-04-07 8:29 ` Daniel P. Berrangé
2021-04-07 21:25 ` Igor Mammedov
2021-04-07 13:29 ` Michael S. Tsirkin
2021-04-07 21:23 ` Igor Mammedov
2021-04-07 13:27 ` Michael S. Tsirkin
2021-03-22 23:00 ` [PULL v2 12/19] acpi: add aml_to_decimalstring() and aml_call6() helpers Michael S. Tsirkin
2021-03-22 23:00 ` [PULL v2 13/19] pci: acpi: add _DSM method to PCI devices Michael S. Tsirkin
2021-03-22 23:00 ` [PULL v2 14/19] tests: acpi: update expected blobs Michael S. Tsirkin
2021-03-23 14:12 ` Michael S. Tsirkin
2021-03-22 23:00 ` [PULL v2 15/19] acpi: Set proper maximum size for "etc/table-loader" blob Michael S. Tsirkin
2021-03-22 23:00 ` [PULL v2 17/19] acpi: Move maximum size logic into acpi_add_rom_blob() Michael S. Tsirkin
2021-03-22 23:00 ` [PULL v2 18/19] acpi: Set proper maximum size for "etc/acpi/rsdp" blob Michael S. Tsirkin
2021-03-22 23:00 ` [PULL v2 19/19] acpi: Move setters/getters of oem fields to X86MachineState Michael S. Tsirkin
2021-03-23 15:30 ` [PULL v2 00/19] pc,virtio,pci: fixes, features Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210322225907.541943-12-mst@redhat.com \
--to=mst@redhat.com \
--cc=imammedo@redhat.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).