qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Richard Henderson <richard.henderson@linaro.org>
To: qemu-devel@nongnu.org
Cc: qemu-ppc@nongnu.org, david@gibson.dropbear.id.au
Subject: [PATCH v5 10/10] target/ppc: Validate hflags with CONFIG_DEBUG_TCG
Date: Tue, 23 Mar 2021 12:43:40 -0600	[thread overview]
Message-ID: <20210323184340.619757-11-richard.henderson@linaro.org> (raw)
In-Reply-To: <20210323184340.619757-1-richard.henderson@linaro.org>

Verify that hflags was updated correctly whenever we change
cpu state that is used by hflags.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
 target/ppc/cpu.h         |  5 +++++
 target/ppc/helper_regs.c | 29 +++++++++++++++++++++++++++--
 2 files changed, 32 insertions(+), 2 deletions(-)

diff --git a/target/ppc/cpu.h b/target/ppc/cpu.h
index 3d021f61f3..69fc9a2831 100644
--- a/target/ppc/cpu.h
+++ b/target/ppc/cpu.h
@@ -2425,6 +2425,10 @@ void cpu_write_xer(CPUPPCState *env, target_ulong xer);
  */
 #define is_book3s_arch2x(ctx) (!!((ctx)->insns_flags & PPC_SEGMENT_64B))
 
+#ifdef CONFIG_DEBUG_TCG
+void cpu_get_tb_cpu_state(CPUPPCState *env, target_ulong *pc,
+                          target_ulong *cs_base, uint32_t *flags);
+#else
 static inline void cpu_get_tb_cpu_state(CPUPPCState *env, target_ulong *pc,
                                         target_ulong *cs_base, uint32_t *flags)
 {
@@ -2432,6 +2436,7 @@ static inline void cpu_get_tb_cpu_state(CPUPPCState *env, target_ulong *pc,
     *cs_base = 0;
     *flags = env->hflags;
 }
+#endif
 
 void QEMU_NORETURN raise_exception(CPUPPCState *env, uint32_t exception);
 void QEMU_NORETURN raise_exception_ra(CPUPPCState *env, uint32_t exception,
diff --git a/target/ppc/helper_regs.c b/target/ppc/helper_regs.c
index 5411a67e9a..3723872aa6 100644
--- a/target/ppc/helper_regs.c
+++ b/target/ppc/helper_regs.c
@@ -43,7 +43,7 @@ void hreg_swap_gpr_tgpr(CPUPPCState *env)
     env->tgpr[3] = tmp;
 }
 
-void hreg_compute_hflags(CPUPPCState *env)
+static uint32_t hreg_compute_hflags_value(CPUPPCState *env)
 {
     target_ulong msr = env->msr;
     uint32_t ppc_flags = env->flags;
@@ -155,9 +155,34 @@ void hreg_compute_hflags(CPUPPCState *env)
     hflags |= dmmu_idx << HFLAGS_DMMU_IDX;
 #endif
 
-    env->hflags = hflags | (msr & msr_mask);
+    return hflags | (msr & msr_mask);
 }
 
+void hreg_compute_hflags(CPUPPCState *env)
+{
+    env->hflags = hreg_compute_hflags_value(env);
+}
+
+#ifdef CONFIG_DEBUG_TCG
+void cpu_get_tb_cpu_state(CPUPPCState *env, target_ulong *pc,
+                          target_ulong *cs_base, uint32_t *flags)
+{
+    uint32_t hflags_current = env->hflags;
+    uint32_t hflags_rebuilt;
+
+    *pc = env->nip;
+    *cs_base = 0;
+    *flags = hflags_current;
+
+    hflags_rebuilt = hreg_compute_hflags_value(env);
+    if (unlikely(hflags_current != hflags_rebuilt)) {
+        cpu_abort(env_cpu(env),
+                  "TCG hflags mismatch (current:0x%08x rebuilt:0x%08x)\n",
+                  hflags_current, hflags_rebuilt);
+    }
+}
+#endif
+
 void cpu_interrupt_exittb(CPUState *cs)
 {
     if (!kvm_enabled()) {
-- 
2.25.1



  parent reply	other threads:[~2021-03-23 19:12 UTC|newest]

Thread overview: 35+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-03-23 18:43 [PATCH v5 00/10] target/ppc: Fix truncation of env->hflags Richard Henderson
2021-03-23 18:43 ` [PATCH v5 01/10] target/ppc: Extract post_load_update_msr Richard Henderson
2021-03-24  0:00   ` David Gibson
2021-03-23 18:43 ` [PATCH v5 02/10] target/ppc: Disconnect hflags from MSR Richard Henderson
2021-03-24  0:03   ` David Gibson
2021-03-29 13:05     ` Greg Kurz
2021-03-29 16:26       ` Richard Henderson
2021-03-30  4:54         ` David Gibson
2021-03-30 15:01           ` Richard Henderson
2021-03-31  0:09             ` David Gibson
2021-03-31  4:04               ` Greg Kurz
2021-03-31  4:47                 ` David Gibson
2021-03-31  6:31                   ` Richard Henderson
2021-04-01  3:17                     ` David Gibson
2021-03-31  7:30                   ` Greg Kurz
2021-03-23 18:43 ` [PATCH v5 03/10] target/ppc: Reduce env->hflags to uint32_t Richard Henderson
2021-03-24  0:03   ` David Gibson
2021-03-23 18:43 ` [PATCH v5 04/10] target/ppc: Put dbcr0 single-step bits into hflags Richard Henderson
2021-03-24  0:04   ` David Gibson
2021-03-23 18:43 ` [PATCH v5 05/10] target/ppc: Create helper_scv Richard Henderson
2021-03-24  0:05   ` David Gibson
2021-03-23 18:43 ` [PATCH v5 06/10] target/ppc: Put LPCR[GTSE] in hflags Richard Henderson
2021-03-24  0:06   ` David Gibson
2021-03-23 18:43 ` [PATCH v5 07/10] target/ppc: Remove MSR_SA and MSR_AP from hflags Richard Henderson
2021-03-24  0:08   ` David Gibson
2021-03-23 18:43 ` [PATCH v5 08/10] target/ppc: Remove env->immu_idx and env->dmmu_idx Richard Henderson
2021-03-24  0:09   ` David Gibson
2021-03-23 18:43 ` [PATCH v5 09/10] linux-user/ppc: Fix msr updates for signal handling Richard Henderson
2021-03-24  0:10   ` David Gibson
2021-03-23 18:43 ` Richard Henderson [this message]
2021-03-24  0:12   ` [PATCH v5 10/10] target/ppc: Validate hflags with CONFIG_DEBUG_TCG David Gibson
2021-03-25  8:47     ` David Gibson
2021-03-26 12:41       ` Richard Henderson
2021-03-27 12:46         ` Richard Henderson
2021-03-28 13:09           ` David Gibson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210323184340.619757-11-richard.henderson@linaro.org \
    --to=richard.henderson@linaro.org \
    --cc=david@gibson.dropbear.id.au \
    --cc=qemu-devel@nongnu.org \
    --cc=qemu-ppc@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).