From: Richard Henderson <richard.henderson@linaro.org>
To: qemu-devel@nongnu.org
Subject: [PATCH v3 18/28] tcg: Tidy tcg_n_regions
Date: Sun, 2 May 2021 16:18:34 -0700 [thread overview]
Message-ID: <20210502231844.1977630-19-richard.henderson@linaro.org> (raw)
In-Reply-To: <20210502231844.1977630-1-richard.henderson@linaro.org>
Compute the value using straight division and bounds,
rather than a loop. Pass in tb_size rather than reading
from tcg_init_ctx.code_gen_buffer_size,
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
tcg/region.c | 29 ++++++++++++-----------------
1 file changed, 12 insertions(+), 17 deletions(-)
diff --git a/tcg/region.c b/tcg/region.c
index bd81b35359..b44246e1aa 100644
--- a/tcg/region.c
+++ b/tcg/region.c
@@ -363,38 +363,33 @@ void tcg_region_reset_all(void)
tcg_region_tree_reset_all();
}
-static size_t tcg_n_regions(unsigned max_cpus)
+static size_t tcg_n_regions(size_t tb_size, unsigned max_cpus)
{
#ifdef CONFIG_USER_ONLY
return 1;
#else
+ size_t n_regions;
+
/*
* It is likely that some vCPUs will translate more code than others,
* so we first try to set more regions than max_cpus, with those regions
* being of reasonable size. If that's not possible we make do by evenly
* dividing the code_gen_buffer among the vCPUs.
*/
- size_t i;
-
/* Use a single region if all we have is one vCPU thread */
if (max_cpus == 1 || !qemu_tcg_mttcg_enabled()) {
return 1;
}
- /* Try to have more regions than max_cpus, with each region being >= 2 MB */
- for (i = 8; i > 0; i--) {
- size_t regions_per_thread = i;
- size_t region_size;
-
- region_size = tcg_init_ctx.code_gen_buffer_size;
- region_size /= max_cpus * regions_per_thread;
-
- if (region_size >= 2 * 1024u * 1024) {
- return max_cpus * regions_per_thread;
- }
+ /*
+ * Try to have more regions than max_cpus, with each region being >= 2 MB.
+ * If we can't, then just allocate one region per vCPU thread.
+ */
+ n_regions = tb_size / (2 * MiB);
+ if (n_regions <= max_cpus) {
+ return max_cpus;
}
- /* If we can't, then just allocate one region per vCPU thread */
- return max_cpus;
+ return MIN(n_regions, max_cpus * 8);
#endif
}
@@ -828,7 +823,7 @@ void tcg_region_init(size_t tb_size, int splitwx, unsigned max_cpus)
buf = tcg_init_ctx.code_gen_buffer;
total_size = tcg_init_ctx.code_gen_buffer_size;
page_size = qemu_real_host_page_size;
- n_regions = tcg_n_regions(max_cpus);
+ n_regions = tcg_n_regions(total_size, max_cpus);
/* The first region will be 'aligned - buf' bytes larger than the others */
aligned = QEMU_ALIGN_PTR_UP(buf, page_size);
--
2.25.1
next prev parent reply other threads:[~2021-05-02 23:43 UTC|newest]
Thread overview: 92+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-02 23:18 [PATCH v3 00/28] tcg: Clean up code_gen_buffer allocation Richard Henderson
2021-05-02 23:18 ` [PATCH v3 01/28] meson: Split out tcg/meson.build Richard Henderson
2021-06-07 19:38 ` Alex Bennée
2021-06-09 14:56 ` Luis Fernando Fujita Pires
2021-05-02 23:18 ` [PATCH v3 02/28] meson: Split out fpu/meson.build Richard Henderson
2021-06-07 19:38 ` Alex Bennée
2021-06-09 14:57 ` Luis Fernando Fujita Pires
2021-05-02 23:18 ` [PATCH v3 03/28] tcg: Re-order tcg_region_init vs tcg_prologue_init Richard Henderson
2021-06-08 9:04 ` Alex Bennée
2021-06-09 14:57 ` Luis Fernando Fujita Pires
2021-05-02 23:18 ` [PATCH v3 04/28] tcg: Remove error return from tcg_region_initial_alloc__locked Richard Henderson
2021-06-08 11:04 ` Alex Bennée
2021-06-08 15:44 ` Richard Henderson
2021-06-09 14:57 ` Luis Fernando Fujita Pires
2021-05-02 23:18 ` [PATCH v3 05/28] tcg: Split out tcg_region_initial_alloc Richard Henderson
2021-06-08 11:45 ` Alex Bennée
2021-06-09 14:57 ` Luis Fernando Fujita Pires
2021-05-02 23:18 ` [PATCH v3 06/28] tcg: Split out tcg_region_prologue_set Richard Henderson
2021-06-08 11:47 ` Alex Bennée
2021-06-09 14:57 ` Luis Fernando Fujita Pires
2021-05-02 23:18 ` [PATCH v3 07/28] tcg: Split out region.c Richard Henderson
2021-06-08 11:48 ` Alex Bennée
2021-06-09 14:57 ` Luis Fernando Fujita Pires
2021-05-02 23:18 ` [PATCH v3 08/28] accel/tcg: Inline cpu_gen_init Richard Henderson
2021-06-08 11:49 ` Alex Bennée
2021-06-09 14:57 ` Luis Fernando Fujita Pires
2021-05-02 23:18 ` [PATCH v3 09/28] accel/tcg: Move alloc_code_gen_buffer to tcg/region.c Richard Henderson
2021-06-08 11:50 ` Alex Bennée
2021-06-09 14:57 ` Luis Fernando Fujita Pires
2021-05-02 23:18 ` [PATCH v3 10/28] accel/tcg: Rename tcg_init to tcg_init_machine Richard Henderson
2021-06-08 11:51 ` Alex Bennée
2021-06-09 14:57 ` Luis Fernando Fujita Pires
2021-05-02 23:18 ` [PATCH v3 11/28] tcg: Create tcg_init Richard Henderson
2021-06-08 11:52 ` Alex Bennée
2021-06-09 14:57 ` Luis Fernando Fujita Pires
2021-05-02 23:18 ` [PATCH v3 12/28] accel/tcg: Merge tcg_exec_init into tcg_init_machine Richard Henderson
2021-06-08 11:55 ` Alex Bennée
2021-06-08 15:45 ` Richard Henderson
2021-06-09 14:58 ` Luis Fernando Fujita Pires
2021-06-10 15:16 ` Richard Henderson
2021-05-02 23:18 ` [PATCH v3 13/28] accel/tcg: Pass down max_cpus to tcg_init Richard Henderson
2021-06-08 15:44 ` Alex Bennée
2021-06-09 14:58 ` Luis Fernando Fujita Pires
2021-05-02 23:18 ` [PATCH v3 14/28] tcg: Introduce tcg_max_ctxs Richard Henderson
2021-06-08 15:54 ` Alex Bennée
2021-06-09 14:58 ` Luis Fernando Fujita Pires
2021-05-02 23:18 ` [PATCH v3 15/28] tcg: Move MAX_CODE_GEN_BUFFER_SIZE to tcg-target.h Richard Henderson
2021-06-08 15:56 ` Alex Bennée
2021-06-09 14:58 ` Luis Fernando Fujita Pires
2021-05-02 23:18 ` [PATCH v3 16/28] tcg: Replace region.end with region.total_size Richard Henderson
2021-06-08 16:03 ` Alex Bennée
2021-06-08 16:12 ` Richard Henderson
2021-06-09 14:58 ` Luis Fernando Fujita Pires
2021-05-02 23:18 ` [PATCH v3 17/28] tcg: Rename region.start to region.after_prologue Richard Henderson
2021-06-08 16:06 ` Alex Bennée
2021-06-09 14:58 ` Luis Fernando Fujita Pires
2021-05-02 23:18 ` Richard Henderson [this message]
2021-06-08 16:06 ` [PATCH v3 18/28] tcg: Tidy tcg_n_regions Alex Bennée
2021-06-09 14:58 ` Luis Fernando Fujita Pires
2021-05-02 23:18 ` [PATCH v3 19/28] tcg: Tidy split_cross_256mb Richard Henderson
2021-06-09 10:01 ` Alex Bennée
2021-06-09 14:59 ` Luis Fernando Fujita Pires
2021-06-10 15:20 ` Richard Henderson
2021-05-02 23:18 ` [PATCH v3 20/28] tcg: Move in_code_gen_buffer and tests to region.c Richard Henderson
2021-06-09 10:07 ` Alex Bennée
2021-06-09 14:59 ` Luis Fernando Fujita Pires
2021-05-02 23:18 ` [PATCH v3 21/28] tcg: Allocate code_gen_buffer into struct tcg_region_state Richard Henderson
2021-06-09 10:29 ` Alex Bennée
2021-06-09 14:59 ` Luis Fernando Fujita Pires
2021-05-02 23:18 ` [PATCH v3 22/28] tcg: Return the map protection from alloc_code_gen_buffer Richard Henderson
2021-06-09 10:30 ` Alex Bennée
2021-06-09 14:59 ` Luis Fernando Fujita Pires
2021-05-02 23:18 ` [PATCH v3 23/28] tcg: Sink qemu_madvise call to common code Richard Henderson
2021-06-09 10:34 ` Alex Bennée
2021-06-09 14:59 ` Luis Fernando Fujita Pires
2021-05-02 23:18 ` [PATCH v3 24/28] util/osdep: Add qemu_mprotect_rw Richard Henderson
2021-06-09 10:34 ` Alex Bennée
2021-06-09 14:59 ` Luis Fernando Fujita Pires
2021-05-02 23:18 ` [PATCH v3 25/28] tcg: Round the tb_size default from qemu_get_host_physmem Richard Henderson
2021-06-09 10:36 ` Alex Bennée
2021-06-09 14:59 ` Luis Fernando Fujita Pires
2021-05-02 23:18 ` [PATCH v3 26/28] tcg: Merge buffer protection and guard page protection Richard Henderson
2021-06-09 10:39 ` Alex Bennée
2021-06-09 14:59 ` Luis Fernando Fujita Pires
2021-05-02 23:18 ` [PATCH v3 27/28] tcg: When allocating for !splitwx, begin with PROT_NONE Richard Henderson
2021-06-09 11:21 ` Alex Bennée
2021-06-10 15:34 ` Richard Henderson
2021-06-09 14:59 ` Luis Fernando Fujita Pires
2021-05-02 23:18 ` [PATCH v3 28/28] tcg: Move tcg_init_ctx and tcg_ctx from accel/tcg/ Richard Henderson
2021-06-09 11:30 ` Alex Bennée
2021-06-09 14:59 ` Luis Fernando Fujita Pires
2021-05-02 23:45 ` [PATCH v3 00/28] tcg: Clean up code_gen_buffer allocation no-reply
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210502231844.1977630-19-richard.henderson@linaro.org \
--to=richard.henderson@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).