From: Richard Henderson <richard.henderson@linaro.org>
To: qemu-devel@nongnu.org
Cc: peter.maydell@linaro.org, "Alex Bennée" <alex.bennee@linaro.org>,
"Philippe Mathieu-Daudé" <f4bug@amsat.org>,
"David Hildenbrand" <david@redhat.com>
Subject: [PULL 04/46] accel/tcg: Use add/sub overflow routines in tcg-runtime-gvec.c
Date: Sun, 16 May 2021 07:33:49 -0500 [thread overview]
Message-ID: <20210516123431.718318-5-richard.henderson@linaro.org> (raw)
In-Reply-To: <20210516123431.718318-1-richard.henderson@linaro.org>
Obvious uses of the new functions.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
accel/tcg/tcg-runtime-gvec.c | 36 ++++++++++++++++--------------------
1 file changed, 16 insertions(+), 20 deletions(-)
diff --git a/accel/tcg/tcg-runtime-gvec.c b/accel/tcg/tcg-runtime-gvec.c
index 521da4a813..ac7d28c251 100644
--- a/accel/tcg/tcg-runtime-gvec.c
+++ b/accel/tcg/tcg-runtime-gvec.c
@@ -1073,9 +1073,8 @@ void HELPER(gvec_ssadd32)(void *d, void *a, void *b, uint32_t desc)
for (i = 0; i < oprsz; i += sizeof(int32_t)) {
int32_t ai = *(int32_t *)(a + i);
int32_t bi = *(int32_t *)(b + i);
- int32_t di = ai + bi;
- if (((di ^ ai) &~ (ai ^ bi)) < 0) {
- /* Signed overflow. */
+ int32_t di;
+ if (sadd32_overflow(ai, bi, &di)) {
di = (di < 0 ? INT32_MAX : INT32_MIN);
}
*(int32_t *)(d + i) = di;
@@ -1091,9 +1090,8 @@ void HELPER(gvec_ssadd64)(void *d, void *a, void *b, uint32_t desc)
for (i = 0; i < oprsz; i += sizeof(int64_t)) {
int64_t ai = *(int64_t *)(a + i);
int64_t bi = *(int64_t *)(b + i);
- int64_t di = ai + bi;
- if (((di ^ ai) &~ (ai ^ bi)) < 0) {
- /* Signed overflow. */
+ int64_t di;
+ if (sadd64_overflow(ai, bi, &di)) {
di = (di < 0 ? INT64_MAX : INT64_MIN);
}
*(int64_t *)(d + i) = di;
@@ -1143,9 +1141,8 @@ void HELPER(gvec_sssub32)(void *d, void *a, void *b, uint32_t desc)
for (i = 0; i < oprsz; i += sizeof(int32_t)) {
int32_t ai = *(int32_t *)(a + i);
int32_t bi = *(int32_t *)(b + i);
- int32_t di = ai - bi;
- if (((di ^ ai) & (ai ^ bi)) < 0) {
- /* Signed overflow. */
+ int32_t di;
+ if (ssub32_overflow(ai, bi, &di)) {
di = (di < 0 ? INT32_MAX : INT32_MIN);
}
*(int32_t *)(d + i) = di;
@@ -1161,9 +1158,8 @@ void HELPER(gvec_sssub64)(void *d, void *a, void *b, uint32_t desc)
for (i = 0; i < oprsz; i += sizeof(int64_t)) {
int64_t ai = *(int64_t *)(a + i);
int64_t bi = *(int64_t *)(b + i);
- int64_t di = ai - bi;
- if (((di ^ ai) & (ai ^ bi)) < 0) {
- /* Signed overflow. */
+ int64_t di;
+ if (ssub64_overflow(ai, bi, &di)) {
di = (di < 0 ? INT64_MAX : INT64_MIN);
}
*(int64_t *)(d + i) = di;
@@ -1209,8 +1205,8 @@ void HELPER(gvec_usadd32)(void *d, void *a, void *b, uint32_t desc)
for (i = 0; i < oprsz; i += sizeof(uint32_t)) {
uint32_t ai = *(uint32_t *)(a + i);
uint32_t bi = *(uint32_t *)(b + i);
- uint32_t di = ai + bi;
- if (di < ai) {
+ uint32_t di;
+ if (uadd32_overflow(ai, bi, &di)) {
di = UINT32_MAX;
}
*(uint32_t *)(d + i) = di;
@@ -1226,8 +1222,8 @@ void HELPER(gvec_usadd64)(void *d, void *a, void *b, uint32_t desc)
for (i = 0; i < oprsz; i += sizeof(uint64_t)) {
uint64_t ai = *(uint64_t *)(a + i);
uint64_t bi = *(uint64_t *)(b + i);
- uint64_t di = ai + bi;
- if (di < ai) {
+ uint64_t di;
+ if (uadd64_overflow(ai, bi, &di)) {
di = UINT64_MAX;
}
*(uint64_t *)(d + i) = di;
@@ -1273,8 +1269,8 @@ void HELPER(gvec_ussub32)(void *d, void *a, void *b, uint32_t desc)
for (i = 0; i < oprsz; i += sizeof(uint32_t)) {
uint32_t ai = *(uint32_t *)(a + i);
uint32_t bi = *(uint32_t *)(b + i);
- uint32_t di = ai - bi;
- if (ai < bi) {
+ uint32_t di;
+ if (usub32_overflow(ai, bi, &di)) {
di = 0;
}
*(uint32_t *)(d + i) = di;
@@ -1290,8 +1286,8 @@ void HELPER(gvec_ussub64)(void *d, void *a, void *b, uint32_t desc)
for (i = 0; i < oprsz; i += sizeof(uint64_t)) {
uint64_t ai = *(uint64_t *)(a + i);
uint64_t bi = *(uint64_t *)(b + i);
- uint64_t di = ai - bi;
- if (ai < bi) {
+ uint64_t di;
+ if (usub64_overflow(ai, bi, &di)) {
di = 0;
}
*(uint64_t *)(d + i) = di;
--
2.25.1
next prev parent reply other threads:[~2021-05-16 12:37 UTC|newest]
Thread overview: 52+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-16 12:33 [PULL 00/46] softfloat: Convert float128 to FloatParts (part 1) Richard Henderson
2021-05-16 12:33 ` [PULL 01/46] qemu/host-utils: Use __builtin_bitreverseN Richard Henderson
2021-05-16 12:33 ` [PULL 02/46] qemu/host-utils: Add wrappers for overflow builtins Richard Henderson
2021-05-16 12:33 ` [PULL 03/46] qemu/host-utils: Add wrappers for carry builtins Richard Henderson
2021-05-16 12:33 ` Richard Henderson [this message]
2021-05-16 12:33 ` [PULL 05/46] tests/fp: add quad support to the benchmark utility Richard Henderson
2021-05-16 12:33 ` [PULL 06/46] softfloat: Move the binary point to the msb Richard Henderson
2021-05-16 12:33 ` [PULL 07/46] softfloat: Inline float_raise Richard Henderson
2021-05-16 12:33 ` [PULL 08/46] softfloat: Use float_raise in more places Richard Henderson
2021-05-16 12:33 ` [PULL 09/46] softfloat: Tidy a * b + inf return Richard Henderson
2021-05-16 12:33 ` [PULL 10/46] softfloat: Add float_cmask and constants Richard Henderson
2021-05-16 12:33 ` [PULL 11/46] softfloat: Use return_nan in float_to_float Richard Henderson
2021-05-16 12:33 ` [PULL 12/46] softfloat: fix return_nan vs default_nan_mode Richard Henderson
2021-05-16 12:33 ` [PULL 13/46] target/mips: Set set_default_nan_mode with set_snan_bit_is_one Richard Henderson
2021-05-16 12:33 ` [PULL 14/46] softfloat: Do not produce a default_nan from parts_silence_nan Richard Henderson
2021-05-16 12:34 ` [PULL 15/46] softfloat: Rename FloatParts to FloatParts64 Richard Henderson
2021-05-16 12:34 ` [PULL 16/46] softfloat: Move type-specific pack/unpack routines Richard Henderson
2021-05-16 12:34 ` [PULL 17/46] softfloat: Use pointers with parts_default_nan Richard Henderson
2021-05-16 12:34 ` [PULL 18/46] softfloat: Use pointers with unpack_raw Richard Henderson
2021-05-16 12:34 ` [PULL 19/46] softfloat: Use pointers with ftype_unpack_raw Richard Henderson
2021-05-16 12:34 ` [PULL 20/46] softfloat: Use pointers with pack_raw Richard Henderson
2021-05-16 12:34 ` [PULL 21/46] softfloat: Use pointers with ftype_pack_raw Richard Henderson
2021-05-16 12:34 ` [PULL 22/46] softfloat: Use pointers with ftype_unpack_canonical Richard Henderson
2021-05-16 12:34 ` [PULL 23/46] softfloat: Use pointers with ftype_round_pack_canonical Richard Henderson
2021-05-16 12:34 ` [PULL 24/46] softfloat: Use pointers with parts_silence_nan Richard Henderson
2021-05-16 12:34 ` [PULL 25/46] softfloat: Rearrange FloatParts64 Richard Henderson
2021-05-16 12:34 ` [PULL 26/46] softfloat: Convert float128_silence_nan to parts Richard Henderson
2021-05-16 12:34 ` [PULL 27/46] softfloat: Convert float128_default_nan " Richard Henderson
2021-05-16 12:34 ` [PULL 28/46] softfloat: Move return_nan to softfloat-parts.c.inc Richard Henderson
2021-05-16 12:34 ` [PULL 29/46] softfloat: Move pick_nan " Richard Henderson
2021-05-16 12:34 ` [PULL 30/46] softfloat: Move pick_nan_muladd " Richard Henderson
2021-05-16 12:34 ` [PULL 31/46] softfloat: Move sf_canonicalize " Richard Henderson
2021-05-16 12:34 ` [PULL 32/46] softfloat: Move round_canonical " Richard Henderson
2021-05-16 12:34 ` [PULL 33/46] softfloat: Use uadd64_carry, usub64_borrow in softfloat-macros.h Richard Henderson
2021-05-16 12:34 ` [PULL 34/46] softfloat: Move addsub_floats to softfloat-parts.c.inc Richard Henderson
2021-05-16 12:34 ` [PULL 35/46] softfloat: Implement float128_add/sub via parts Richard Henderson
2021-05-16 12:34 ` [PULL 36/46] softfloat: Move mul_floats to softfloat-parts.c.inc Richard Henderson
2021-05-16 12:34 ` [PULL 37/46] softfloat: Move muladd_floats " Richard Henderson
2021-05-16 12:34 ` [PULL 38/46] softfloat: Use mulu64 for mul64To128 Richard Henderson
2021-05-16 12:34 ` [PULL 39/46] softfloat: Use add192 in mul128To256 Richard Henderson
2021-05-16 12:34 ` [PULL 40/46] softfloat: Tidy mul128By64To192 Richard Henderson
2021-05-16 12:34 ` [PULL 41/46] softfloat: Introduce sh[lr]_double primitives Richard Henderson
2021-05-16 12:34 ` [PULL 42/46] softfloat: Move div_floats to softfloat-parts.c.inc Richard Henderson
2021-05-20 13:40 ` Peter Maydell
2021-05-20 16:15 ` Richard Henderson
2021-05-20 17:04 ` Peter Maydell
2021-05-16 12:34 ` [PULL 43/46] softfloat: Split float_to_float Richard Henderson
2021-05-16 12:34 ` [PULL 44/46] softfloat: Convert float-to-float conversions with float128 Richard Henderson
2021-05-16 12:34 ` [PULL 45/46] softfloat: Move round_to_int to softfloat-parts.c.inc Richard Henderson
2021-05-16 12:34 ` [PULL 46/46] softfloat: Move round_to_int_and_pack " Richard Henderson
2021-05-16 13:19 ` [PULL 00/46] softfloat: Convert float128 to FloatParts (part 1) no-reply
2021-05-18 10:11 ` Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210516123431.718318-5-richard.henderson@linaro.org \
--to=richard.henderson@linaro.org \
--cc=alex.bennee@linaro.org \
--cc=david@redhat.com \
--cc=f4bug@amsat.org \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).