Re: [RFC PATCH v3 1/4] vl.c: Add -smp, clusters=* command line support for ARM cpu

[Andrew Jones <drjones@redhat.com>]

On Sun, May 16, 2021 at 06:32:25PM +0800, Yanan Wang wrote:
> In implementations of ARM architecture, at most there could be a
> cpu hierarchy like "sockets/dies/clusters/cores/threads" defined.
> For example, ARM64 server chip Kunpeng 920 totally has 2 sockets,
> 2 NUMA nodes (also means cpu dies) in each socket, 6 clusters in
> each NUMA node, 4 cores in each cluster, and doesn't support SMT.
> Clusters within the same NUMA share a L3 cache and cores within
> the same cluster share a L2 cache.
> 
> The cache affinity of ARM cluster has been proved to improve the
> kernel scheduling performance and a patchset has been posted, in
> which a general sched_domain for clusters was added and a cluster
> level was added in the arch-neutral cpu topology struct like below.
> 
> struct cpu_topology {
>     int thread_id;
>     int core_id;
>     int cluster_id;
>     int package_id;
>     int llc_id;
>     cpumask_t thread_sibling;
>     cpumask_t core_sibling;
>     cpumask_t cluster_sibling;
>     cpumask_t llc_sibling;
> }
> 
> In virtuallization, exposing the cluster level topology to guest
> kernel may also improve the scheduling performance. So let's add
> the -smp, clusters=* command line support for ARM cpu, then users
> will be able to define a four-level cpu hierarchy for machines
> and it will be sockets/clusters/cores/threads.
> 
> Because we only support clusters for ARM cpu currently, a new member
> "smp_clusters" is only added to the VirtMachineState structure.
> 
> Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
> ---
>  include/hw/arm/virt.h |  1 +
>  qemu-options.hx       | 26 +++++++++++++++-----------
>  softmmu/vl.c          |  3 +++
>  3 files changed, 19 insertions(+), 11 deletions(-)
> 
> diff --git a/include/hw/arm/virt.h b/include/hw/arm/virt.h
> index f546dd2023..74fff9667b 100644
> --- a/include/hw/arm/virt.h
> +++ b/include/hw/arm/virt.h
> @@ -156,6 +156,7 @@ struct VirtMachineState {
>      char *pciehb_nodename;
>      const int *irqmap;
>      int fdt_size;
> +    unsigned smp_clusters;
>      uint32_t clock_phandle;
>      uint32_t gic_phandle;
>      uint32_t msi_phandle;
> diff --git a/qemu-options.hx b/qemu-options.hx
> index bd97086c21..245eb415a6 100644
> --- a/qemu-options.hx
> +++ b/qemu-options.hx
> @@ -184,25 +184,29 @@ SRST
>  ERST
>  
>  DEF("smp", HAS_ARG, QEMU_OPTION_smp,
> -    "-smp [cpus=]n[,maxcpus=cpus][,cores=cores][,threads=threads][,dies=dies][,sockets=sockets]\n"
> +    "-smp [cpus=]n[,maxcpus=cpus][,cores=cores][,threads=threads][,clusters=clusters][,dies=dies][,sockets=sockets]\n"
>      "                set the number of CPUs to 'n' [default=1]\n"
>      "                maxcpus= maximum number of total cpus, including\n"
>      "                offline CPUs for hotplug, etc\n"
> -    "                cores= number of CPU cores on one socket (for PC, it's on one die)\n"
> +    "                cores= number of CPU cores on one socket\n"
> +    "                (it's on one die for PC, and on one cluster for ARM)\n"
>      "                threads= number of threads on one CPU core\n"
> +    "                clusters= number of CPU clusters on one socket (for ARM only)\n"
>      "                dies= number of CPU dies on one socket (for PC only)\n"
>      "                sockets= number of discrete sockets in the system\n",
>          QEMU_ARCH_ALL)
>  SRST
> -``-smp [cpus=]n[,cores=cores][,threads=threads][,dies=dies][,sockets=sockets][,maxcpus=maxcpus]``
> -    Simulate an SMP system with n CPUs. On the PC target, up to 255 CPUs
> -    are supported. On Sparc32 target, Linux limits the number of usable
> -    CPUs to 4. For the PC target, the number of cores per die, the
> -    number of threads per cores, the number of dies per packages and the
> -    total number of sockets can be specified. Missing values will be
> -    computed. If any on the three values is given, the total number of
> -    CPUs n can be omitted. maxcpus specifies the maximum number of
> -    hotpluggable CPUs.
> +``-smp [cpus=]n[,cores=cores][,threads=threads][,clusters=clusters][,dies=dies][,sockets=sockets][,maxcpus=maxcpus]``
> +    Simulate an SMP system with n CPUs. On the PC target, up to 255
> +    CPUs are supported. On the Sparc32 target, Linux limits the number
> +    of usable CPUs to 4. For the PC target, the number of threads per
> +    core, the number of cores per die, the number of dies per package
> +    and the total number of sockets can be specified. For the ARM target,
> +    the number of threads per core, the number of cores per cluster, the
> +    number of clusters per socket and the total number of sockets can be
> +    specified. And missing values will be computed. If any of the five
                  ^ Why did you add this 'And'?
> +    values is given, the total number of CPUs n can be omitted.

The last two sentences are not valid for Arm, which requires most of its
parameters to be given.

> Maxcpus
> +    specifies the maximum number of hotpluggable CPUs.
>  
>      For the ARM target, at least one of cpus or maxcpus must be provided.
>      Threads will default to 1 if not provided. Sockets and cores must be
> diff --git a/softmmu/vl.c b/softmmu/vl.c
> index 307944aef3..69a5c73ef7 100644
> --- a/softmmu/vl.c
> +++ b/softmmu/vl.c
> @@ -719,6 +719,9 @@ static QemuOptsList qemu_smp_opts = {
>          }, {
>              .name = "dies",
>              .type = QEMU_OPT_NUMBER,
> +        }, {
> +            .name = "clusters",
> +            .type = QEMU_OPT_NUMBER,
>          }, {
>              .name = "cores",
>              .type = QEMU_OPT_NUMBER,
> -- 
> 2.19.1
>

Thanks,
drew