qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Richard Henderson <richard.henderson@linaro.org>
To: qemu-devel@nongnu.org
Cc: bruno.larsen@eldorado.org.br, qemu-ppc@nongnu.org,
	david@gibson.dropbear.id.au
Subject: [PATCH 16/24] target/ppc: Remove PowerPCCPUClass.handle_mmu_fault
Date: Tue, 18 May 2021 15:11:38 -0500	[thread overview]
Message-ID: <20210518201146.794854-17-richard.henderson@linaro.org> (raw)
In-Reply-To: <20210518201146.794854-1-richard.henderson@linaro.org>

Instead, use a switch on env->mmu_model.  This avoids some
replicated information in cpu setup.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
 target/ppc/cpu-qom.h    |  1 -
 target/ppc/cpu_init.c   | 45 -----------------------------------------
 target/ppc/mmu_helper.c | 24 ++++++++++++++++++----
 3 files changed, 20 insertions(+), 50 deletions(-)

diff --git a/target/ppc/cpu-qom.h b/target/ppc/cpu-qom.h
index 06b6571bc9..3b14d2f134 100644
--- a/target/ppc/cpu-qom.h
+++ b/target/ppc/cpu-qom.h
@@ -198,7 +198,6 @@ struct PowerPCCPUClass {
     int n_host_threads;
     void (*init_proc)(CPUPPCState *env);
     int  (*check_pow)(CPUPPCState *env);
-    int (*handle_mmu_fault)(PowerPCCPU *cpu, vaddr eaddr, int rwx, int mmu_idx);
     bool (*interrupts_big_endian)(PowerPCCPU *cpu);
 };
 
diff --git a/target/ppc/cpu_init.c b/target/ppc/cpu_init.c
index d0fa219880..d33aded7cf 100644
--- a/target/ppc/cpu_init.c
+++ b/target/ppc/cpu_init.c
@@ -4580,9 +4580,6 @@ POWERPC_FAMILY(601)(ObjectClass *oc, void *data)
                     (1ull << MSR_IR) |
                     (1ull << MSR_DR);
     pcc->mmu_model = POWERPC_MMU_601;
-#if defined(CONFIG_SOFTMMU)
-    pcc->handle_mmu_fault = ppc_hash32_handle_mmu_fault;
-#endif
     pcc->excp_model = POWERPC_EXCP_601;
     pcc->bus_model = PPC_FLAGS_INPUT_6xx;
     pcc->bfd_mach = bfd_mach_ppc_601;
@@ -4625,9 +4622,6 @@ POWERPC_FAMILY(601v)(ObjectClass *oc, void *data)
                     (1ull << MSR_IR) |
                     (1ull << MSR_DR);
     pcc->mmu_model = POWERPC_MMU_601;
-#if defined(CONFIG_SOFTMMU)
-    pcc->handle_mmu_fault = ppc_hash32_handle_mmu_fault;
-#endif
     pcc->bus_model = PPC_FLAGS_INPUT_6xx;
     pcc->bfd_mach = bfd_mach_ppc_601;
     pcc->flags = POWERPC_FLAG_SE | POWERPC_FLAG_RTC_CLK | POWERPC_FLAG_HID0_LE;
@@ -4891,9 +4885,6 @@ POWERPC_FAMILY(604)(ObjectClass *oc, void *data)
                     (1ull << MSR_RI) |
                     (1ull << MSR_LE);
     pcc->mmu_model = POWERPC_MMU_32B;
-#if defined(CONFIG_SOFTMMU)
-    pcc->handle_mmu_fault = ppc_hash32_handle_mmu_fault;
-#endif
     pcc->excp_model = POWERPC_EXCP_604;
     pcc->bus_model = PPC_FLAGS_INPUT_6xx;
     pcc->bfd_mach = bfd_mach_ppc_604;
@@ -4975,9 +4966,6 @@ POWERPC_FAMILY(604E)(ObjectClass *oc, void *data)
                     (1ull << MSR_RI) |
                     (1ull << MSR_LE);
     pcc->mmu_model = POWERPC_MMU_32B;
-#if defined(CONFIG_SOFTMMU)
-    pcc->handle_mmu_fault = ppc_hash32_handle_mmu_fault;
-#endif
     pcc->excp_model = POWERPC_EXCP_604;
     pcc->bus_model = PPC_FLAGS_INPUT_6xx;
     pcc->bfd_mach = bfd_mach_ppc_604;
@@ -5046,9 +5034,6 @@ POWERPC_FAMILY(740)(ObjectClass *oc, void *data)
                     (1ull << MSR_RI) |
                     (1ull << MSR_LE);
     pcc->mmu_model = POWERPC_MMU_32B;
-#if defined(CONFIG_SOFTMMU)
-    pcc->handle_mmu_fault = ppc_hash32_handle_mmu_fault;
-#endif
     pcc->excp_model = POWERPC_EXCP_7x0;
     pcc->bus_model = PPC_FLAGS_INPUT_6xx;
     pcc->bfd_mach = bfd_mach_ppc_750;
@@ -5126,9 +5111,6 @@ POWERPC_FAMILY(750)(ObjectClass *oc, void *data)
                     (1ull << MSR_RI) |
                     (1ull << MSR_LE);
     pcc->mmu_model = POWERPC_MMU_32B;
-#if defined(CONFIG_SOFTMMU)
-    pcc->handle_mmu_fault = ppc_hash32_handle_mmu_fault;
-#endif
     pcc->excp_model = POWERPC_EXCP_7x0;
     pcc->bus_model = PPC_FLAGS_INPUT_6xx;
     pcc->bfd_mach = bfd_mach_ppc_750;
@@ -5329,9 +5311,6 @@ POWERPC_FAMILY(750cl)(ObjectClass *oc, void *data)
                     (1ull << MSR_RI) |
                     (1ull << MSR_LE);
     pcc->mmu_model = POWERPC_MMU_32B;
-#if defined(CONFIG_SOFTMMU)
-    pcc->handle_mmu_fault = ppc_hash32_handle_mmu_fault;
-#endif
     pcc->excp_model = POWERPC_EXCP_7x0;
     pcc->bus_model = PPC_FLAGS_INPUT_6xx;
     pcc->bfd_mach = bfd_mach_ppc_750;
@@ -5412,9 +5391,6 @@ POWERPC_FAMILY(750cx)(ObjectClass *oc, void *data)
                     (1ull << MSR_RI) |
                     (1ull << MSR_LE);
     pcc->mmu_model = POWERPC_MMU_32B;
-#if defined(CONFIG_SOFTMMU)
-    pcc->handle_mmu_fault = ppc_hash32_handle_mmu_fault;
-#endif
     pcc->excp_model = POWERPC_EXCP_7x0;
     pcc->bus_model = PPC_FLAGS_INPUT_6xx;
     pcc->bfd_mach = bfd_mach_ppc_750;
@@ -5500,9 +5476,6 @@ POWERPC_FAMILY(750fx)(ObjectClass *oc, void *data)
                     (1ull << MSR_RI) |
                     (1ull << MSR_LE);
     pcc->mmu_model = POWERPC_MMU_32B;
-#if defined(CONFIG_SOFTMMU)
-    pcc->handle_mmu_fault = ppc_hash32_handle_mmu_fault;
-#endif
     pcc->excp_model = POWERPC_EXCP_7x0;
     pcc->bus_model = PPC_FLAGS_INPUT_6xx;
     pcc->bfd_mach = bfd_mach_ppc_750;
@@ -5588,9 +5561,6 @@ POWERPC_FAMILY(750gx)(ObjectClass *oc, void *data)
                     (1ull << MSR_RI) |
                     (1ull << MSR_LE);
     pcc->mmu_model = POWERPC_MMU_32B;
-#if defined(CONFIG_SOFTMMU)
-    pcc->handle_mmu_fault = ppc_hash32_handle_mmu_fault;
-#endif
     pcc->excp_model = POWERPC_EXCP_7x0;
     pcc->bus_model = PPC_FLAGS_INPUT_6xx;
     pcc->bfd_mach = bfd_mach_ppc_750;
@@ -5830,9 +5800,6 @@ POWERPC_FAMILY(7400)(ObjectClass *oc, void *data)
                     (1ull << MSR_RI) |
                     (1ull << MSR_LE);
     pcc->mmu_model = POWERPC_MMU_32B;
-#if defined(CONFIG_SOFTMMU)
-    pcc->handle_mmu_fault = ppc_hash32_handle_mmu_fault;
-#endif
     pcc->excp_model = POWERPC_EXCP_74xx;
     pcc->bus_model = PPC_FLAGS_INPUT_6xx;
     pcc->bfd_mach = bfd_mach_ppc_7400;
@@ -5916,9 +5883,6 @@ POWERPC_FAMILY(7410)(ObjectClass *oc, void *data)
                     (1ull << MSR_RI) |
                     (1ull << MSR_LE);
     pcc->mmu_model = POWERPC_MMU_32B;
-#if defined(CONFIG_SOFTMMU)
-    pcc->handle_mmu_fault = ppc_hash32_handle_mmu_fault;
-#endif
     pcc->excp_model = POWERPC_EXCP_74xx;
     pcc->bus_model = PPC_FLAGS_INPUT_6xx;
     pcc->bfd_mach = bfd_mach_ppc_7400;
@@ -6745,9 +6709,6 @@ POWERPC_FAMILY(e600)(ObjectClass *oc, void *data)
                     (1ull << MSR_RI) |
                     (1ull << MSR_LE);
     pcc->mmu_model = POWERPC_MMU_32B;
-#if defined(CONFIG_SOFTMMU)
-    pcc->handle_mmu_fault = ppc_hash32_handle_mmu_fault;
-#endif
     pcc->excp_model = POWERPC_EXCP_74xx;
     pcc->bus_model = PPC_FLAGS_INPUT_6xx;
     pcc->bfd_mach = bfd_mach_ppc_7400;
@@ -7507,7 +7468,6 @@ POWERPC_FAMILY(970)(ObjectClass *oc, void *data)
                     (1ull << MSR_RI);
     pcc->mmu_model = POWERPC_MMU_64B;
 #if defined(CONFIG_SOFTMMU)
-    pcc->handle_mmu_fault = ppc_hash64_handle_mmu_fault;
     pcc->hash64_opts = &ppc_hash64_opts_basic;
 #endif
     pcc->excp_model = POWERPC_EXCP_970;
@@ -7585,7 +7545,6 @@ POWERPC_FAMILY(POWER5P)(ObjectClass *oc, void *data)
         LPCR_RMI | LPCR_HDICE;
     pcc->mmu_model = POWERPC_MMU_2_03;
 #if defined(CONFIG_SOFTMMU)
-    pcc->handle_mmu_fault = ppc_hash64_handle_mmu_fault;
     pcc->hash64_opts = &ppc_hash64_opts_basic;
     pcc->lrg_decr_bits = 32;
 #endif
@@ -7729,7 +7688,6 @@ POWERPC_FAMILY(POWER7)(ObjectClass *oc, void *data)
     pcc->lpcr_pm = LPCR_P7_PECE0 | LPCR_P7_PECE1 | LPCR_P7_PECE2;
     pcc->mmu_model = POWERPC_MMU_2_06;
 #if defined(CONFIG_SOFTMMU)
-    pcc->handle_mmu_fault = ppc_hash64_handle_mmu_fault;
     pcc->hash64_opts = &ppc_hash64_opts_POWER7;
     pcc->lrg_decr_bits = 32;
 #endif
@@ -7906,7 +7864,6 @@ POWERPC_FAMILY(POWER8)(ObjectClass *oc, void *data)
                    LPCR_P8_PECE3 | LPCR_P8_PECE4;
     pcc->mmu_model = POWERPC_MMU_2_07;
 #if defined(CONFIG_SOFTMMU)
-    pcc->handle_mmu_fault = ppc_hash64_handle_mmu_fault;
     pcc->hash64_opts = &ppc_hash64_opts_POWER7;
     pcc->lrg_decr_bits = 32;
     pcc->n_host_threads = 8;
@@ -8122,7 +8079,6 @@ POWERPC_FAMILY(POWER9)(ObjectClass *oc, void *data)
     pcc->lpcr_pm = LPCR_PDEE | LPCR_HDEE | LPCR_EEE | LPCR_DEE | LPCR_OEE;
     pcc->mmu_model = POWERPC_MMU_3_00;
 #if defined(CONFIG_SOFTMMU)
-    pcc->handle_mmu_fault = ppc64_v3_handle_mmu_fault;
     /* segment page size remain the same */
     pcc->hash64_opts = &ppc_hash64_opts_POWER7;
     pcc->radix_page_info = &POWER9_radix_page_info;
@@ -8334,7 +8290,6 @@ POWERPC_FAMILY(POWER10)(ObjectClass *oc, void *data)
     pcc->lpcr_pm = LPCR_PDEE | LPCR_HDEE | LPCR_EEE | LPCR_DEE | LPCR_OEE;
     pcc->mmu_model = POWERPC_MMU_3_00;
 #if defined(CONFIG_SOFTMMU)
-    pcc->handle_mmu_fault = ppc64_v3_handle_mmu_fault;
     /* segment page size remain the same */
     pcc->hash64_opts = &ppc_hash64_opts_POWER7;
     pcc->radix_page_info = &POWER10_radix_page_info;
diff --git a/target/ppc/mmu_helper.c b/target/ppc/mmu_helper.c
index ef634fcb33..863e556a22 100644
--- a/target/ppc/mmu_helper.c
+++ b/target/ppc/mmu_helper.c
@@ -2963,14 +2963,30 @@ bool ppc_cpu_tlb_fill(CPUState *cs, vaddr addr, int size,
                       bool probe, uintptr_t retaddr)
 {
     PowerPCCPU *cpu = POWERPC_CPU(cs);
-    PowerPCCPUClass *pcc = POWERPC_CPU_GET_CLASS(cs);
     CPUPPCState *env = &cpu->env;
     int ret;
 
-    if (pcc->handle_mmu_fault) {
-        ret = pcc->handle_mmu_fault(cpu, addr, access_type, mmu_idx);
-    } else {
+    switch (env->mmu_model) {
+#if defined(TARGET_PPC64)
+    case POWERPC_MMU_64B:
+    case POWERPC_MMU_2_03:
+    case POWERPC_MMU_2_06:
+    case POWERPC_MMU_2_07:
+        ret = ppc_hash64_handle_mmu_fault(cpu, addr, access_type, mmu_idx);
+        break;
+    case POWERPC_MMU_3_00:
+        ret = ppc64_v3_handle_mmu_fault(cpu, addr, access_type, mmu_idx);
+        break;
+#endif
+
+    case POWERPC_MMU_32B:
+    case POWERPC_MMU_601:
+        ret = ppc_hash32_handle_mmu_fault(cpu, addr, access_type, mmu_idx);
+        break;
+
+    default:
         ret = cpu_ppc_handle_mmu_fault(env, addr, access_type, mmu_idx);
+        break;
     }
     if (unlikely(ret != 0)) {
         if (probe) {
-- 
2.25.1



  parent reply	other threads:[~2021-05-18 20:26 UTC|newest]

Thread overview: 46+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-05-18 20:11 [PATCH 00/24] target/ppc: Clean up mmu translation Richard Henderson
2021-05-18 20:11 ` [PATCH 01/24] target/ppc: Introduce prot_for_access_type Richard Henderson
2021-05-18 20:11 ` [PATCH 02/24] target/ppc: Use MMUAccessType in mmu-radix64.c Richard Henderson
2021-05-18 20:11 ` [PATCH 03/24] target/ppc: Use MMUAccessType in mmu-hash64.c Richard Henderson
2021-05-18 20:11 ` [PATCH 04/24] target/ppc: Use MMUAccessType in mmu-hash32.c Richard Henderson
2021-05-18 20:11 ` [PATCH 05/24] target/ppc: Rename access_type to type in mmu_helper.c Richard Henderson
2021-05-18 20:11 ` [PATCH 06/24] target/ppc: Use MMUAccessType " Richard Henderson
2021-05-18 20:11 ` [PATCH 07/24] target/ppc: Remove type argument from check_prot Richard Henderson
2021-05-18 20:11 ` [PATCH 08/24] target/ppc: Remove type argument from ppc6xx_tlb_pte_check Richard Henderson
2021-05-18 20:11 ` [PATCH 09/24] target/ppc: Remove type argument from ppc6xx_tlb_check Richard Henderson
2021-05-18 20:11 ` [PATCH 10/24] target/ppc: Remove type argument from get_bat_6xx_tlb Richard Henderson
2021-05-18 20:11 ` [PATCH 11/24] target/ppc: Remove type argument from mmu40x_get_physical_address Richard Henderson
2021-05-18 20:11 ` [PATCH 12/24] target/ppc: Remove type argument from mmubooke_check_tlb Richard Henderson
2021-05-18 20:11 ` [PATCH 13/24] target/ppc: Remove type argument from mmubooke_get_physical_address Richard Henderson
2021-05-18 20:11 ` [PATCH 14/24] target/ppc: Remove type argument from mmubooke206_check_tlb Richard Henderson
2021-05-18 20:11 ` [PATCH 15/24] target/ppc: Remove type argument for mmubooke206_get_physical_address Richard Henderson
2021-05-18 20:11 ` Richard Henderson [this message]
2021-05-19 13:02   ` [PATCH 16/24] target/ppc: Remove PowerPCCPUClass.handle_mmu_fault Bruno Piazera Larsen
2021-05-24  3:28   ` David Gibson
2021-05-24  4:36     ` Richard Henderson
2021-05-24  5:11       ` David Gibson
2021-05-18 20:11 ` [PATCH 17/24] target/ppc: Use MMUAccessType with *_handle_mmu_fault Richard Henderson
2021-05-19 13:02   ` Bruno Piazera Larsen
2021-05-18 20:11 ` [PATCH 18/24] target/ppc: Push real-mode handling into ppc_radix64_xlate Richard Henderson
2021-05-19 17:44   ` Bruno Piazera Larsen
2021-05-18 20:11 ` [PATCH 19/24] target/ppc: Use bool success for ppc_radix64_xlate Richard Henderson
2021-05-19 17:53   ` Bruno Piazera Larsen
2021-05-18 20:11 ` [PATCH 20/24] target/ppc: Split out ppc_hash64_xlate Richard Henderson
2021-05-19 18:09   ` Bruno Piazera Larsen
2021-05-18 20:11 ` [PATCH 21/24] target/ppc: Split out ppc_hash32_xlate Richard Henderson
2021-05-19 18:20   ` Bruno Piazera Larsen
2021-05-18 20:11 ` [PATCH 22/24] target/ppc: Split out ppc_jumbo_xlate Richard Henderson
2021-05-19 18:40   ` Bruno Piazera Larsen
2021-05-24  3:19     ` David Gibson
2021-05-18 20:11 ` [PATCH 23/24] target/ppc: Introduce ppc_xlate Richard Henderson
2021-05-19 18:53   ` Bruno Piazera Larsen
2021-05-18 20:11 ` [PATCH 24/24] target/ppc: Restrict ppc_cpu_tlb_fill to TCG Richard Henderson
2021-05-20 13:18   ` Bruno Piazera Larsen
2021-05-20 14:52     ` Richard Henderson
2021-05-20 17:13       ` Bruno Piazera Larsen
2021-05-19  2:52 ` [PATCH 00/24] target/ppc: Clean up mmu translation David Gibson
2021-05-19 20:37   ` Richard Henderson
2021-05-19 22:47     ` Richard Henderson
2021-05-24  3:26       ` David Gibson
2021-05-24  4:47         ` Richard Henderson
2021-05-24 12:16         ` Bruno Piazera Larsen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210518201146.794854-17-richard.henderson@linaro.org \
    --to=richard.henderson@linaro.org \
    --cc=bruno.larsen@eldorado.org.br \
    --cc=david@gibson.dropbear.id.au \
    --cc=qemu-devel@nongnu.org \
    --cc=qemu-ppc@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).