From: David Gibson <david@gibson.dropbear.id.au>
To: peter.maydell@linaro.org, groug@kaod.org
Cc: richard.henderson@linaro.org, qemu-ppc@nongnu.org,
qemu-devel@nongnu.org, David Gibson <david@gibson.dropbear.id.au>
Subject: [PULL 36/48] target/ppc: Use MMUAccessType in mmu-hash64.c
Date: Wed, 19 May 2021 22:51:36 +1000 [thread overview]
Message-ID: <20210519125148.27720-37-david@gibson.dropbear.id.au> (raw)
In-Reply-To: <20210519125148.27720-1-david@gibson.dropbear.id.au>
From: Richard Henderson <richard.henderson@linaro.org>
We must leave the 'int rwx' parameter to ppc_hash64_handle_mmu_fault
for now, but will clean that up later.
Signed-off-by: Ricgard Henderson <richard.henderson@linaro.org>
Message-Id: <20210518201146.794854-4-richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
---
target/ppc/mmu-hash64.c | 61 ++++++++++++++++++++++++++---------------
1 file changed, 39 insertions(+), 22 deletions(-)
diff --git a/target/ppc/mmu-hash64.c b/target/ppc/mmu-hash64.c
index d5b70ddc9c..f48b625f48 100644
--- a/target/ppc/mmu-hash64.c
+++ b/target/ppc/mmu-hash64.c
@@ -877,10 +877,12 @@ int ppc_hash64_handle_mmu_fault(PowerPCCPU *cpu, vaddr eaddr,
hwaddr ptex;
ppc_hash_pte64_t pte;
int exec_prot, pp_prot, amr_prot, prot;
+ MMUAccessType access_type;
int need_prot;
hwaddr raddr;
assert((rwx == 0) || (rwx == 1) || (rwx == 2));
+ access_type = rwx;
/*
* Note on LPCR usage: 970 uses HID4, but our special variant of
@@ -891,7 +893,7 @@ int ppc_hash64_handle_mmu_fault(PowerPCCPU *cpu, vaddr eaddr,
*/
/* 1. Handle real mode accesses */
- if (((rwx == 2) && (msr_ir == 0)) || ((rwx != 2) && (msr_dr == 0))) {
+ if (access_type == MMU_INST_FETCH ? !msr_ir : !msr_dr) {
/*
* Translation is supposedly "off", but in real mode the top 4
* effective address bits are (mostly) ignored
@@ -924,14 +926,19 @@ int ppc_hash64_handle_mmu_fault(PowerPCCPU *cpu, vaddr eaddr,
/* Emulated old-style RMO mode, bounds check against RMLS */
if (raddr >= limit) {
- if (rwx == 2) {
+ switch (access_type) {
+ case MMU_INST_FETCH:
ppc_hash64_set_isi(cs, SRR1_PROTFAULT);
- } else {
- int dsisr = DSISR_PROTFAULT;
- if (rwx == 1) {
- dsisr |= DSISR_ISSTORE;
- }
- ppc_hash64_set_dsi(cs, eaddr, dsisr);
+ break;
+ case MMU_DATA_LOAD:
+ ppc_hash64_set_dsi(cs, eaddr, DSISR_PROTFAULT);
+ break;
+ case MMU_DATA_STORE:
+ ppc_hash64_set_dsi(cs, eaddr,
+ DSISR_PROTFAULT | DSISR_ISSTORE);
+ break;
+ default:
+ g_assert_not_reached();
}
return 1;
}
@@ -954,13 +961,19 @@ int ppc_hash64_handle_mmu_fault(PowerPCCPU *cpu, vaddr eaddr,
exit(1);
}
/* Segment still not found, generate the appropriate interrupt */
- if (rwx == 2) {
+ switch (access_type) {
+ case MMU_INST_FETCH:
cs->exception_index = POWERPC_EXCP_ISEG;
env->error_code = 0;
- } else {
+ break;
+ case MMU_DATA_LOAD:
+ case MMU_DATA_STORE:
cs->exception_index = POWERPC_EXCP_DSEG;
env->error_code = 0;
env->spr[SPR_DAR] = eaddr;
+ break;
+ default:
+ g_assert_not_reached();
}
return 1;
}
@@ -968,7 +981,7 @@ int ppc_hash64_handle_mmu_fault(PowerPCCPU *cpu, vaddr eaddr,
skip_slb_search:
/* 3. Check for segment level no-execute violation */
- if ((rwx == 2) && (slb->vsid & SLB_VSID_N)) {
+ if (access_type == MMU_INST_FETCH && (slb->vsid & SLB_VSID_N)) {
ppc_hash64_set_isi(cs, SRR1_NOEXEC_GUARD);
return 1;
}
@@ -976,14 +989,18 @@ skip_slb_search:
/* 4. Locate the PTE in the hash table */
ptex = ppc_hash64_htab_lookup(cpu, slb, eaddr, &pte, &apshift);
if (ptex == -1) {
- if (rwx == 2) {
+ switch (access_type) {
+ case MMU_INST_FETCH:
ppc_hash64_set_isi(cs, SRR1_NOPTE);
- } else {
- int dsisr = DSISR_NOPTE;
- if (rwx == 1) {
- dsisr |= DSISR_ISSTORE;
- }
- ppc_hash64_set_dsi(cs, eaddr, dsisr);
+ break;
+ case MMU_DATA_LOAD:
+ ppc_hash64_set_dsi(cs, eaddr, DSISR_NOPTE);
+ break;
+ case MMU_DATA_STORE:
+ ppc_hash64_set_dsi(cs, eaddr, DSISR_NOPTE | DSISR_ISSTORE);
+ break;
+ default:
+ g_assert_not_reached();
}
return 1;
}
@@ -997,11 +1014,11 @@ skip_slb_search:
amr_prot = ppc_hash64_amr_prot(cpu, pte);
prot = exec_prot & pp_prot & amr_prot;
- need_prot = prot_for_access_type(rwx);
+ need_prot = prot_for_access_type(access_type);
if (need_prot & ~prot) {
/* Access right violation */
qemu_log_mask(CPU_LOG_MMU, "PTE access rejected\n");
- if (rwx == 2) {
+ if (access_type == MMU_INST_FETCH) {
int srr1 = 0;
if (PAGE_EXEC & ~exec_prot) {
srr1 |= SRR1_NOEXEC_GUARD; /* Access violates noexec or guard */
@@ -1017,7 +1034,7 @@ skip_slb_search:
if (need_prot & ~pp_prot) {
dsisr |= DSISR_PROTFAULT;
}
- if (rwx == 1) {
+ if (access_type == MMU_DATA_STORE) {
dsisr |= DSISR_ISSTORE;
}
if (need_prot & ~amr_prot) {
@@ -1036,7 +1053,7 @@ skip_slb_search:
ppc_hash64_set_r(cpu, ptex, pte.pte1);
}
if (!(pte.pte1 & HPTE64_R_C)) {
- if (rwx == 1) {
+ if (access_type == MMU_DATA_STORE) {
ppc_hash64_set_c(cpu, ptex, pte.pte1);
} else {
/*
--
2.31.1
next prev parent reply other threads:[~2021-05-19 13:17 UTC|newest]
Thread overview: 52+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-19 12:51 [PULL 00/48] ppc-for-6.1 queue 20210519 David Gibson
2021-05-19 12:51 ` [PULL 01/48] hw/ppc/spapr.c: Extract MMU mode error reporting into a function David Gibson
2021-05-19 12:51 ` [PULL 02/48] hw/ppc/spapr.c: Make sure the host supports the selected MMU mode David Gibson
2021-05-19 12:51 ` [PULL 03/48] target/ppc: Fold gen_*_xer into their callers David Gibson
2021-05-19 12:51 ` [PULL 04/48] target/ppc: renamed SPR registration functions David Gibson
2021-05-19 12:51 ` [PULL 05/48] target/ppc: move SPR R/W callbacks to translate.c David Gibson
2021-05-19 12:51 ` [PULL 06/48] hw/ppc: moved hcalls that depend on softmmu David Gibson
2021-05-19 12:51 ` [PULL 07/48] target/ppc: moved function out of mmu-hash64 David Gibson
2021-05-19 12:51 ` [PULL 08/48] target/ppc: moved ppc_store_lpcr to misc_helper.c David Gibson
2021-05-19 12:51 ` [PULL 09/48] hw/ppc: moved has_spr to cpu.h David Gibson
2021-05-19 12:51 ` [PULL 10/48] target/ppc: turned SPR R/W callbacks not static David Gibson
2021-05-19 12:51 ` [PULL 11/48] target/ppc: isolated cpu init from translation logic David Gibson
2021-05-19 12:51 ` [PULL 12/48] target/ppc: created ppc_{store, get}_vscr for generic vscr usage David Gibson
2021-05-19 12:51 ` [PULL 13/48] target/ppc: updated vscr manipulation in machine.c David Gibson
2021-05-19 12:51 ` [PULL 14/48] target/ppc: moved ppc_store_sdr1 to cpu.c David Gibson
2021-05-19 12:51 ` [PULL 15/48] target/ppc: moved ppc_cpu_dump_state to cpu_init.c David Gibson
2021-05-19 12:51 ` [PULL 16/48] target/ppc: Add cia field to DisasContext David Gibson
2021-05-19 12:51 ` [PULL 17/48] target/ppc: Split out decode_legacy David Gibson
2021-05-19 12:51 ` [PULL 18/48] target/ppc: Move DISAS_NORETURN setting into gen_exception* David Gibson
2021-05-19 12:51 ` [PULL 19/48] target/ppc: Remove special case for POWERPC_SYSCALL David Gibson
2021-05-19 12:51 ` [PULL 20/48] target/ppc: Remove special case for POWERPC_EXCP_TRAP David Gibson
2021-05-19 12:51 ` [PULL 21/48] target/ppc: Simplify gen_debug_exception David Gibson
2021-05-19 12:51 ` [PULL 22/48] target/ppc: Introduce DISAS_{EXIT,CHAIN}{,_UPDATE} David Gibson
2021-05-19 12:51 ` [PULL 23/48] target/ppc: Replace POWERPC_EXCP_SYNC with DISAS_EXIT David Gibson
2021-05-19 12:51 ` [PULL 24/48] target/ppc: Remove unnecessary gen_io_end calls David Gibson
2021-05-19 12:51 ` [PULL 25/48] target/ppc: Introduce gen_icount_io_start David Gibson
2021-05-19 12:51 ` [PULL 26/48] target/ppc: Replace POWERPC_EXCP_STOP with DISAS_EXIT_UPDATE David Gibson
2021-05-19 12:51 ` [PULL 27/48] target/ppc: Replace POWERPC_EXCP_BRANCH with DISAS_NORETURN David Gibson
2021-05-19 12:51 ` [PULL 28/48] target/ppc: Remove DisasContext.exception David Gibson
2021-05-19 12:51 ` [PULL 29/48] target/ppc: Move single-step check to ppc_tr_tb_stop David Gibson
2021-05-19 12:51 ` [PULL 30/48] target/ppc: Tidy exception vs exit_tb David Gibson
2021-05-19 12:51 ` [PULL 31/48] target/ppc: Mark helper_raise_exception* as noreturn David Gibson
2021-05-19 12:51 ` [PULL 32/48] target/ppc: Use translator_loop_temp_check David Gibson
2021-05-19 12:51 ` [PULL 33/48] target/ppc: Fix load endianness for lxvwsx/lxvdsx David Gibson
2021-05-19 12:51 ` [PULL 34/48] target/ppc: Introduce prot_for_access_type David Gibson
2021-05-19 12:51 ` [PULL 35/48] target/ppc: Use MMUAccessType in mmu-radix64.c David Gibson
2021-05-19 12:51 ` David Gibson [this message]
2021-05-19 12:51 ` [PULL 37/48] target/ppc: Use MMUAccessType in mmu-hash32.c David Gibson
2021-05-19 12:51 ` [PULL 38/48] target/ppc: Rename access_type to type in mmu_helper.c David Gibson
2021-05-19 12:51 ` [PULL 39/48] target/ppc: Use MMUAccessType " David Gibson
2021-05-19 12:51 ` [PULL 40/48] target/ppc: Remove type argument from check_prot David Gibson
2021-05-19 12:51 ` [PULL 41/48] target/ppc: Remove type argument from ppc6xx_tlb_pte_check David Gibson
2021-05-19 12:51 ` [PULL 42/48] target/ppc: Remove type argument from ppc6xx_tlb_check David Gibson
2021-05-19 12:51 ` [PULL 43/48] target/ppc: Remove type argument from get_bat_6xx_tlb David Gibson
2021-05-19 12:51 ` [PULL 44/48] target/ppc: Remove type argument from mmu40x_get_physical_address David Gibson
2021-05-19 12:51 ` [PULL 45/48] target/ppc: Remove type argument from mmubooke_check_tlb David Gibson
2021-05-19 12:51 ` [PULL 46/48] target/ppc: Remove type argument from mmubooke_get_physical_address David Gibson
2021-05-19 12:51 ` [PULL 47/48] target/ppc: Remove type argument from mmubooke206_check_tlb David Gibson
2021-05-19 12:51 ` [PULL 48/48] target/ppc: Remove type argument for mmubooke206_get_physical_address David Gibson
2021-05-19 13:46 ` [PULL 00/48] ppc-for-6.1 queue 20210519 no-reply
2021-05-20 0:42 ` David Gibson
2021-05-20 9:00 ` Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210519125148.27720-37-david@gibson.dropbear.id.au \
--to=david@gibson.dropbear.id.au \
--cc=groug@kaod.org \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
--cc=qemu-ppc@nongnu.org \
--cc=richard.henderson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).