From: Peter Maydell <peter.maydell@linaro.org>
To: qemu-devel@nongnu.org
Subject: [PULL 065/114] target/arm: Implement SVE2 XAR
Date: Tue, 25 May 2021 16:02:35 +0100 [thread overview]
Message-ID: <20210525150324.32370-66-peter.maydell@linaro.org> (raw)
In-Reply-To: <20210525150324.32370-1-peter.maydell@linaro.org>
From: Richard Henderson <richard.henderson@linaro.org>
In addition, use the same vector generator interface for AdvSIMD.
This fixes a bug in which the AdvSIMD insn failed to clear the
high bits of the SVE register.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-44-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
target/arm/helper-sve.h | 4 ++
target/arm/helper.h | 2 +
target/arm/translate-a64.h | 3 ++
target/arm/sve.decode | 4 ++
target/arm/sve_helper.c | 39 ++++++++++++++
target/arm/translate-a64.c | 25 ++-------
target/arm/translate-sve.c | 104 +++++++++++++++++++++++++++++++++++++
target/arm/vec_helper.c | 12 +++++
8 files changed, 172 insertions(+), 21 deletions(-)
diff --git a/target/arm/helper-sve.h b/target/arm/helper-sve.h
index 507a2fea8e4..28b8f002017 100644
--- a/target/arm/helper-sve.h
+++ b/target/arm/helper-sve.h
@@ -2558,6 +2558,10 @@ DEF_HELPER_FLAGS_5(sve2_histcnt_d, TCG_CALL_NO_RWG,
DEF_HELPER_FLAGS_4(sve2_histseg, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
+DEF_HELPER_FLAGS_4(sve2_xar_b, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
+DEF_HELPER_FLAGS_4(sve2_xar_h, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
+DEF_HELPER_FLAGS_4(sve2_xar_s, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
+
DEF_HELPER_FLAGS_6(sve2_faddp_zpzz_h, TCG_CALL_NO_RWG,
void, ptr, ptr, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_6(sve2_faddp_zpzz_s, TCG_CALL_NO_RWG,
diff --git a/target/arm/helper.h b/target/arm/helper.h
index 6bb0b0ddc03..23a7ec56384 100644
--- a/target/arm/helper.h
+++ b/target/arm/helper.h
@@ -953,6 +953,8 @@ DEF_HELPER_FLAGS_5(neon_sqrdmulh_h, TCG_CALL_NO_RWG,
DEF_HELPER_FLAGS_5(neon_sqrdmulh_s, TCG_CALL_NO_RWG,
void, ptr, ptr, ptr, ptr, i32)
+DEF_HELPER_FLAGS_4(gvec_xar_d, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
+
#ifdef TARGET_AARCH64
#include "helper-a64.h"
#include "helper-sve.h"
diff --git a/target/arm/translate-a64.h b/target/arm/translate-a64.h
index 89437276e70..58f50abca46 100644
--- a/target/arm/translate-a64.h
+++ b/target/arm/translate-a64.h
@@ -120,5 +120,8 @@ bool disas_sve(DisasContext *, uint32_t);
void gen_gvec_rax1(unsigned vece, uint32_t rd_ofs, uint32_t rn_ofs,
uint32_t rm_ofs, uint32_t opr_sz, uint32_t max_sz);
+void gen_gvec_xar(unsigned vece, uint32_t rd_ofs, uint32_t rn_ofs,
+ uint32_t rm_ofs, int64_t shift,
+ uint32_t opr_sz, uint32_t max_sz);
#endif /* TARGET_ARM_TRANSLATE_A64_H */
diff --git a/target/arm/sve.decode b/target/arm/sve.decode
index 8f501a083c9..7645587469c 100644
--- a/target/arm/sve.decode
+++ b/target/arm/sve.decode
@@ -65,6 +65,7 @@
&rr_dbm rd rn dbm
&rrri rd rn rm imm
&rri_esz rd rn imm esz
+&rrri_esz rd rn rm imm esz
&rrr_esz rd rn rm esz
&rpr_esz rd pg rn esz
&rpr_s rd pg rn s
@@ -384,6 +385,9 @@ ORR_zzz 00000100 01 1 ..... 001 100 ..... ..... @rd_rn_rm_e0
EOR_zzz 00000100 10 1 ..... 001 100 ..... ..... @rd_rn_rm_e0
BIC_zzz 00000100 11 1 ..... 001 100 ..... ..... @rd_rn_rm_e0
+XAR 00000100 .. 1 ..... 001 101 rm:5 rd:5 &rrri_esz \
+ rn=%reg_movprfx esz=%tszimm16_esz imm=%tszimm16_shr
+
# SVE2 bitwise ternary operations
EOR3 00000100 00 1 ..... 001 110 ..... ..... @rdn_ra_rm_e0
BSL 00000100 00 1 ..... 001 111 ..... ..... @rdn_ra_rm_e0
diff --git a/target/arm/sve_helper.c b/target/arm/sve_helper.c
index 662ed80b1c4..5b6292929ee 100644
--- a/target/arm/sve_helper.c
+++ b/target/arm/sve_helper.c
@@ -7202,3 +7202,42 @@ void HELPER(sve2_histseg)(void *vd, void *vn, void *vm, uint32_t desc)
*(uint64_t *)(vd + i + 8) = out1;
}
}
+
+void HELPER(sve2_xar_b)(void *vd, void *vn, void *vm, uint32_t desc)
+{
+ intptr_t i, opr_sz = simd_oprsz(desc) / 8;
+ int shr = simd_data(desc);
+ int shl = 8 - shr;
+ uint64_t mask = dup_const(MO_8, 0xff >> shr);
+ uint64_t *d = vd, *n = vn, *m = vm;
+
+ for (i = 0; i < opr_sz; ++i) {
+ uint64_t t = n[i] ^ m[i];
+ d[i] = ((t >> shr) & mask) | ((t << shl) & ~mask);
+ }
+}
+
+void HELPER(sve2_xar_h)(void *vd, void *vn, void *vm, uint32_t desc)
+{
+ intptr_t i, opr_sz = simd_oprsz(desc) / 8;
+ int shr = simd_data(desc);
+ int shl = 16 - shr;
+ uint64_t mask = dup_const(MO_16, 0xffff >> shr);
+ uint64_t *d = vd, *n = vn, *m = vm;
+
+ for (i = 0; i < opr_sz; ++i) {
+ uint64_t t = n[i] ^ m[i];
+ d[i] = ((t >> shr) & mask) | ((t << shl) & ~mask);
+ }
+}
+
+void HELPER(sve2_xar_s)(void *vd, void *vn, void *vm, uint32_t desc)
+{
+ intptr_t i, opr_sz = simd_oprsz(desc) / 4;
+ int shr = simd_data(desc);
+ uint32_t *d = vd, *n = vn, *m = vm;
+
+ for (i = 0; i < opr_sz; ++i) {
+ d[i] = ror32(n[i] ^ m[i], shr);
+ }
+}
diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c
index 0c80d0b5055..bdd47208b15 100644
--- a/target/arm/translate-a64.c
+++ b/target/arm/translate-a64.c
@@ -14349,8 +14349,6 @@ static void disas_crypto_xar(DisasContext *s, uint32_t insn)
int imm6 = extract32(insn, 10, 6);
int rn = extract32(insn, 5, 5);
int rd = extract32(insn, 0, 5);
- TCGv_i64 tcg_op1, tcg_op2, tcg_res[2];
- int pass;
if (!dc_isar_feature(aa64_sha3, s)) {
unallocated_encoding(s);
@@ -14361,25 +14359,10 @@ static void disas_crypto_xar(DisasContext *s, uint32_t insn)
return;
}
- tcg_op1 = tcg_temp_new_i64();
- tcg_op2 = tcg_temp_new_i64();
- tcg_res[0] = tcg_temp_new_i64();
- tcg_res[1] = tcg_temp_new_i64();
-
- for (pass = 0; pass < 2; pass++) {
- read_vec_element(s, tcg_op1, rn, pass, MO_64);
- read_vec_element(s, tcg_op2, rm, pass, MO_64);
-
- tcg_gen_xor_i64(tcg_res[pass], tcg_op1, tcg_op2);
- tcg_gen_rotri_i64(tcg_res[pass], tcg_res[pass], imm6);
- }
- write_vec_element(s, tcg_res[0], rd, 0, MO_64);
- write_vec_element(s, tcg_res[1], rd, 1, MO_64);
-
- tcg_temp_free_i64(tcg_op1);
- tcg_temp_free_i64(tcg_op2);
- tcg_temp_free_i64(tcg_res[0]);
- tcg_temp_free_i64(tcg_res[1]);
+ gen_gvec_xar(MO_64, vec_full_reg_offset(s, rd),
+ vec_full_reg_offset(s, rn),
+ vec_full_reg_offset(s, rm), imm6, 16,
+ vec_full_reg_size(s));
}
/* Crypto three-reg imm2
diff --git a/target/arm/translate-sve.c b/target/arm/translate-sve.c
index 13f84d14d3e..ba39ff84a54 100644
--- a/target/arm/translate-sve.c
+++ b/target/arm/translate-sve.c
@@ -340,6 +340,110 @@ static bool trans_BIC_zzz(DisasContext *s, arg_rrr_esz *a)
return do_zzz_fn(s, a, tcg_gen_gvec_andc);
}
+static void gen_xar8_i64(TCGv_i64 d, TCGv_i64 n, TCGv_i64 m, int64_t sh)
+{
+ TCGv_i64 t = tcg_temp_new_i64();
+ uint64_t mask = dup_const(MO_8, 0xff >> sh);
+
+ tcg_gen_xor_i64(t, n, m);
+ tcg_gen_shri_i64(d, t, sh);
+ tcg_gen_shli_i64(t, t, 8 - sh);
+ tcg_gen_andi_i64(d, d, mask);
+ tcg_gen_andi_i64(t, t, ~mask);
+ tcg_gen_or_i64(d, d, t);
+ tcg_temp_free_i64(t);
+}
+
+static void gen_xar16_i64(TCGv_i64 d, TCGv_i64 n, TCGv_i64 m, int64_t sh)
+{
+ TCGv_i64 t = tcg_temp_new_i64();
+ uint64_t mask = dup_const(MO_16, 0xffff >> sh);
+
+ tcg_gen_xor_i64(t, n, m);
+ tcg_gen_shri_i64(d, t, sh);
+ tcg_gen_shli_i64(t, t, 16 - sh);
+ tcg_gen_andi_i64(d, d, mask);
+ tcg_gen_andi_i64(t, t, ~mask);
+ tcg_gen_or_i64(d, d, t);
+ tcg_temp_free_i64(t);
+}
+
+static void gen_xar_i32(TCGv_i32 d, TCGv_i32 n, TCGv_i32 m, int32_t sh)
+{
+ tcg_gen_xor_i32(d, n, m);
+ tcg_gen_rotri_i32(d, d, sh);
+}
+
+static void gen_xar_i64(TCGv_i64 d, TCGv_i64 n, TCGv_i64 m, int64_t sh)
+{
+ tcg_gen_xor_i64(d, n, m);
+ tcg_gen_rotri_i64(d, d, sh);
+}
+
+static void gen_xar_vec(unsigned vece, TCGv_vec d, TCGv_vec n,
+ TCGv_vec m, int64_t sh)
+{
+ tcg_gen_xor_vec(vece, d, n, m);
+ tcg_gen_rotri_vec(vece, d, d, sh);
+}
+
+void gen_gvec_xar(unsigned vece, uint32_t rd_ofs, uint32_t rn_ofs,
+ uint32_t rm_ofs, int64_t shift,
+ uint32_t opr_sz, uint32_t max_sz)
+{
+ static const TCGOpcode vecop[] = { INDEX_op_rotli_vec, 0 };
+ static const GVecGen3i ops[4] = {
+ { .fni8 = gen_xar8_i64,
+ .fniv = gen_xar_vec,
+ .fno = gen_helper_sve2_xar_b,
+ .opt_opc = vecop,
+ .vece = MO_8 },
+ { .fni8 = gen_xar16_i64,
+ .fniv = gen_xar_vec,
+ .fno = gen_helper_sve2_xar_h,
+ .opt_opc = vecop,
+ .vece = MO_16 },
+ { .fni4 = gen_xar_i32,
+ .fniv = gen_xar_vec,
+ .fno = gen_helper_sve2_xar_s,
+ .opt_opc = vecop,
+ .vece = MO_32 },
+ { .fni8 = gen_xar_i64,
+ .fniv = gen_xar_vec,
+ .fno = gen_helper_gvec_xar_d,
+ .opt_opc = vecop,
+ .vece = MO_64 }
+ };
+ int esize = 8 << vece;
+
+ /* The SVE2 range is 1 .. esize; the AdvSIMD range is 0 .. esize-1. */
+ tcg_debug_assert(shift >= 0);
+ tcg_debug_assert(shift <= esize);
+ shift &= esize - 1;
+
+ if (shift == 0) {
+ /* xar with no rotate devolves to xor. */
+ tcg_gen_gvec_xor(vece, rd_ofs, rn_ofs, rm_ofs, opr_sz, max_sz);
+ } else {
+ tcg_gen_gvec_3i(rd_ofs, rn_ofs, rm_ofs, opr_sz, max_sz,
+ shift, &ops[vece]);
+ }
+}
+
+static bool trans_XAR(DisasContext *s, arg_rrri_esz *a)
+{
+ if (a->esz < 0 || !dc_isar_feature(aa64_sve2, s)) {
+ return false;
+ }
+ if (sve_access_check(s)) {
+ unsigned vsz = vec_full_reg_size(s);
+ gen_gvec_xar(a->esz, vec_full_reg_offset(s, a->rd),
+ vec_full_reg_offset(s, a->rn),
+ vec_full_reg_offset(s, a->rm), a->imm, vsz, vsz);
+ }
+ return true;
+}
+
static bool do_sve2_zzzz_fn(DisasContext *s, arg_rrrr_esz *a, GVecGen4Fn *fn)
{
if (!dc_isar_feature(aa64_sve2, s)) {
diff --git a/target/arm/vec_helper.c b/target/arm/vec_helper.c
index 19006f50f71..a3d80ecad05 100644
--- a/target/arm/vec_helper.c
+++ b/target/arm/vec_helper.c
@@ -2253,3 +2253,15 @@ void HELPER(gvec_umulh_d)(void *vd, void *vn, void *vm, uint32_t desc)
}
clear_tail(d, opr_sz, simd_maxsz(desc));
}
+
+void HELPER(gvec_xar_d)(void *vd, void *vn, void *vm, uint32_t desc)
+{
+ intptr_t i, opr_sz = simd_oprsz(desc) / 8;
+ int shr = simd_data(desc);
+ uint64_t *d = vd, *n = vn, *m = vm;
+
+ for (i = 0; i < opr_sz; ++i) {
+ d[i] = ror64(n[i] ^ m[i], shr);
+ }
+ clear_tail(d, opr_sz * 8, simd_maxsz(desc));
+}
--
2.20.1
next prev parent reply other threads:[~2021-05-25 15:37 UTC|newest]
Thread overview: 96+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-25 15:01 [PULL 000/114] target-arm queue Peter Maydell
2021-05-25 15:01 ` [PULL 001/114] hw/arm/smmuv3: Another range invalidation fix Peter Maydell
2021-05-25 15:01 ` [PULL 002/114] hw/intc/arm_gicv3_cpuif: Fix EOIR write access check logic Peter Maydell
2021-05-25 15:01 ` [PULL 003/114] hw/arm/mps2-tz: Don't duplicate modelling of SRAM in AN524 Peter Maydell
2021-05-25 15:01 ` [PULL 004/114] hw/arm/mps2-tz: Make SRAM_ADDR_WIDTH board-specific Peter Maydell
2021-05-25 15:01 ` [PULL 005/114] hw/arm/armsse.c: Correct modelling of SSE-300 internal SRAMs Peter Maydell
2021-05-25 15:01 ` [PULL 006/114] hw/arm/armsse: Convert armsse_realize() to use ERRP_GUARD Peter Maydell
2021-05-25 15:01 ` [PULL 007/114] hw/arm/mps2-tz: Allow board to specify a boot RAM size Peter Maydell
2021-05-25 15:01 ` [PULL 008/114] hw/arm: Model TCMs in the SSE-300, not the AN547 Peter Maydell
2021-05-25 15:01 ` [PULL 009/114] target/arm: Use correct SP in M-profile exception return Peter Maydell
2021-05-25 15:01 ` [PULL 010/114] accel/tcg: Replace g_new() + memcpy() by g_memdup() Peter Maydell
2021-05-25 15:01 ` [PULL 011/114] accel/tcg: Pass length argument to tlb_flush_range_locked() Peter Maydell
2021-05-25 15:01 ` [PULL 012/114] accel/tlb: Rename TLBFlushPageBitsByMMUIdxData -> TLBFlushRangeData Peter Maydell
2021-05-25 15:01 ` [PULL 013/114] accel/tcg: Remove {encode,decode}_pbm_to_runon Peter Maydell
2021-05-25 15:01 ` [PULL 014/114] accel/tcg: Add tlb_flush_range_by_mmuidx() Peter Maydell
2021-05-25 15:01 ` [PULL 015/114] accel/tcg: Add tlb_flush_range_by_mmuidx_all_cpus() Peter Maydell
2021-05-25 15:01 ` [PULL 016/114] accel/tlb: Add tlb_flush_range_by_mmuidx_all_cpus_synced() Peter Maydell
2021-05-25 15:01 ` [PULL 017/114] accel/tcg: Rename tlb_flush_page_bits -> range]_by_mmuidx_async_0 Peter Maydell
2021-05-25 15:01 ` [PULL 018/114] accel/tlb: Rename tlb_flush_[page_bits > range]_by_mmuidx_async_[2 > 1] Peter Maydell
2021-05-25 15:01 ` [PULL 019/114] target/arm: Add support for FEAT_TLBIRANGE Peter Maydell
2021-05-25 15:01 ` [PULL 020/114] target/arm: Add support for FEAT_TLBIOS Peter Maydell
2021-05-25 15:01 ` [PULL 021/114] target/arm: set ID_AA64ISAR0.TLB to 2 for max AARCH64 CPU type Peter Maydell
2021-05-25 15:01 ` [PULL 022/114] disas/libvixl: Protect C system header for C++ compiler Peter Maydell
2021-05-25 15:01 ` [PULL 023/114] target/arm: Add ID_AA64ZFR0 fields and isar_feature_aa64_sve2 Peter Maydell
2021-05-25 15:01 ` [PULL 024/114] target/arm: Implement SVE2 Integer Multiply - Unpredicated Peter Maydell
2021-05-25 15:01 ` [PULL 025/114] target/arm: Implement SVE2 integer pairwise add and accumulate long Peter Maydell
2021-05-25 15:01 ` [PULL 026/114] target/arm: Implement SVE2 integer unary operations (predicated) Peter Maydell
2021-05-25 15:01 ` [PULL 027/114] target/arm: Split out saturating/rounding shifts from neon Peter Maydell
2021-05-25 15:01 ` [PULL 028/114] target/arm: Implement SVE2 saturating/rounding bitwise shift left (predicated) Peter Maydell
2021-05-25 15:01 ` [PULL 029/114] target/arm: Implement SVE2 integer halving add/subtract (predicated) Peter Maydell
2021-05-25 15:02 ` [PULL 030/114] target/arm: Implement SVE2 integer pairwise arithmetic Peter Maydell
2021-05-25 15:02 ` [PULL 031/114] target/arm: Implement SVE2 saturating add/subtract (predicated) Peter Maydell
2021-05-25 15:02 ` [PULL 032/114] target/arm: Implement SVE2 integer add/subtract long Peter Maydell
2021-05-25 15:02 ` [PULL 033/114] target/arm: Implement SVE2 integer add/subtract interleaved long Peter Maydell
2021-05-25 15:02 ` [PULL 034/114] target/arm: Implement SVE2 integer add/subtract wide Peter Maydell
2021-05-25 15:02 ` [PULL 035/114] target/arm: Implement SVE2 integer multiply long Peter Maydell
2021-05-25 15:02 ` [PULL 036/114] target/arm: Implement SVE2 PMULLB, PMULLT Peter Maydell
2021-05-25 15:02 ` [PULL 037/114] target/arm: Implement SVE2 bitwise shift left long Peter Maydell
2021-05-25 15:02 ` [PULL 038/114] target/arm: Implement SVE2 bitwise exclusive-or interleaved Peter Maydell
2021-05-25 15:02 ` [PULL 039/114] target/arm: Implement SVE2 bitwise permute Peter Maydell
2021-05-25 15:02 ` [PULL 040/114] target/arm: Implement SVE2 complex integer add Peter Maydell
2021-05-25 15:02 ` [PULL 041/114] target/arm: Implement SVE2 integer absolute difference and accumulate long Peter Maydell
2021-05-25 15:02 ` [PULL 042/114] target/arm: Implement SVE2 integer add/subtract long with carry Peter Maydell
2021-05-25 15:02 ` [PULL 043/114] target/arm: Implement SVE2 bitwise shift right and accumulate Peter Maydell
2021-05-25 15:02 ` [PULL 044/114] target/arm: Implement SVE2 bitwise shift and insert Peter Maydell
2021-05-25 15:02 ` [PULL 045/114] target/arm: Implement SVE2 integer absolute difference and accumulate Peter Maydell
2021-05-25 15:02 ` [PULL 046/114] target/arm: Implement SVE2 saturating extract narrow Peter Maydell
2021-05-25 15:02 ` [PULL 047/114] target/arm: Implement SVE2 floating-point pairwise Peter Maydell
2021-05-25 15:02 ` [PULL 048/114] target/arm: Implement SVE2 SHRN, RSHRN Peter Maydell
2021-05-25 15:02 ` [PULL 049/114] target/arm: Implement SVE2 SQSHRUN, SQRSHRUN Peter Maydell
2021-05-25 15:02 ` [PULL 050/114] target/arm: Implement SVE2 UQSHRN, UQRSHRN Peter Maydell
2021-05-25 15:02 ` [PULL 051/114] target/arm: Implement SVE2 SQSHRN, SQRSHRN Peter Maydell
2021-05-25 15:02 ` [PULL 052/114] target/arm: Implement SVE2 WHILEGT, WHILEGE, WHILEHI, WHILEHS Peter Maydell
2021-05-25 15:02 ` [PULL 053/114] target/arm: Implement SVE2 WHILERW, WHILEWR Peter Maydell
2021-05-25 15:02 ` [PULL 054/114] target/arm: Implement SVE2 bitwise ternary operations Peter Maydell
2021-05-25 15:02 ` [PULL 055/114] target/arm: Implement SVE2 MATCH, NMATCH Peter Maydell
2021-05-25 15:02 ` [PULL 056/114] target/arm: Implement SVE2 saturating multiply-add long Peter Maydell
2021-05-25 15:02 ` [PULL 057/114] target/arm: Implement SVE2 saturating multiply-add high Peter Maydell
2021-05-25 15:02 ` [PULL 058/114] target/arm: Implement SVE2 integer multiply-add long Peter Maydell
2021-05-25 15:02 ` [PULL 059/114] target/arm: Implement SVE2 complex integer multiply-add Peter Maydell
2021-05-25 15:02 ` [PULL 060/114] target/arm: Implement SVE2 ADDHNB, ADDHNT Peter Maydell
2021-05-25 15:02 ` [PULL 061/114] target/arm: Implement SVE2 RADDHNB, RADDHNT Peter Maydell
2021-05-25 15:02 ` [PULL 062/114] target/arm: Implement SVE2 SUBHNB, SUBHNT Peter Maydell
2021-05-25 15:02 ` [PULL 063/114] target/arm: Implement SVE2 RSUBHNB, RSUBHNT Peter Maydell
2021-05-25 15:02 ` [PULL 064/114] target/arm: Implement SVE2 HISTCNT, HISTSEG Peter Maydell
2021-05-25 15:02 ` Peter Maydell [this message]
2021-05-25 15:02 ` [PULL 066/114] target/arm: Implement SVE2 scatter store insns Peter Maydell
2021-05-25 15:02 ` [PULL 067/114] target/arm: Implement SVE2 gather load insns Peter Maydell
2021-05-25 15:02 ` [PULL 068/114] target/arm: Implement SVE2 FMMLA Peter Maydell
2021-05-25 15:02 ` [PULL 069/114] target/arm: Implement SVE2 SPLICE, EXT Peter Maydell
2021-05-25 15:02 ` [PULL 070/114] target/arm: Use correct output type for gvec_sdot_*_b Peter Maydell
2021-05-25 15:02 ` [PULL 071/114] target/arm: Pass separate addend to {U, S}DOT helpers Peter Maydell
2021-05-25 15:02 ` [PULL 072/114] target/arm: Pass separate addend to FCMLA helpers Peter Maydell
2021-05-25 15:02 ` [PULL 073/114] target/arm: Split out formats for 2 vectors + 1 index Peter Maydell
2021-05-25 15:02 ` [PULL 074/114] target/arm: Split out formats for 3 " Peter Maydell
2021-05-25 15:02 ` [PULL 075/114] target/arm: Implement SVE2 integer multiply (indexed) Peter Maydell
2021-05-25 15:02 ` [PULL 076/114] target/arm: Implement SVE2 integer multiply-add (indexed) Peter Maydell
2021-05-25 15:02 ` [PULL 077/114] target/arm: Implement SVE2 saturating multiply-add high (indexed) Peter Maydell
2021-05-25 15:02 ` [PULL 078/114] target/arm: Implement SVE2 saturating multiply-add (indexed) Peter Maydell
2021-05-25 15:02 ` [PULL 079/114] target/arm: Implement SVE2 saturating multiply (indexed) Peter Maydell
2021-05-25 15:02 ` [PULL 080/114] target/arm: Implement SVE2 signed saturating doubling multiply high Peter Maydell
2021-05-25 15:02 ` [PULL 081/114] target/arm: Implement SVE2 saturating multiply high (indexed) Peter Maydell
2021-05-25 15:02 ` [PULL 082/114] target/arm: Implement SVE2 multiply-add long (indexed) Peter Maydell
2021-05-25 15:02 ` [PULL 083/114] target/arm: Implement SVE2 integer multiply " Peter Maydell
2021-05-25 15:02 ` [PULL 084/114] target/arm: Implement SVE2 complex integer multiply-add (indexed) Peter Maydell
2021-05-25 15:02 ` [PULL 085/114] target/arm: Implement SVE2 complex integer dot product Peter Maydell
2021-05-25 15:02 ` [PULL 086/114] target/arm: Macroize helper_gvec_{s,u}dot_{b,h} Peter Maydell
2021-05-25 15:02 ` [PULL 087/114] target/arm: Macroize helper_gvec_{s,u}dot_idx_{b,h} Peter Maydell
2021-05-25 15:02 ` [PULL 088/114] target/arm: Implement SVE mixed sign dot product (indexed) Peter Maydell
2021-05-25 15:02 ` [PULL 089/114] target/arm: Implement SVE mixed sign dot product Peter Maydell
2021-05-25 15:03 ` [PULL 090/114] target/arm: Implement SVE2 crypto unary operations Peter Maydell
2021-05-25 15:03 ` [PULL 091/114] target/arm: Implement SVE2 crypto destructive binary operations Peter Maydell
2021-05-25 15:03 ` [PULL 092/114] target/arm: Implement SVE2 crypto constructive " Peter Maydell
2021-05-25 15:03 ` [PULL 093/114] target/arm: Implement SVE2 TBL, TBX Peter Maydell
2021-05-25 15:03 ` [PULL 094/114] target/arm: Implement SVE2 FCVTNT Peter Maydell
2021-05-25 16:30 ` [PULL 000/114] target-arm queue Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210525150324.32370-66-peter.maydell@linaro.org \
--to=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).