qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Kevin Wolf <kwolf@redhat.com>
To: qemu-block@nongnu.org
Cc: kwolf@redhat.com, raphael.norwitz@nutanix.com,
	qemu-devel@nongnu.org, mst@redhat.com
Subject: [PATCH 2/7] vhost: Distinguish errors in vhost_backend_init()
Date: Wed,  9 Jun 2021 17:46:53 +0200	[thread overview]
Message-ID: <20210609154658.350308-3-kwolf@redhat.com> (raw)
In-Reply-To: <20210609154658.350308-1-kwolf@redhat.com>

Instead of just returning 0/-1 and letting the caller make up a
meaningless error message, add an Error parameter to allow reporting the
real error and switch to 0/-errno so that different kind of errors can
be distinguished in the caller.

Specifically, in vhost-user, EPROTO is used for all errors that relate
to the connection itself, whereas other error codes are used for errors
relating to the content of the connection. This will allow us later to
automatically reconnect when the connection goes away, without ending up
in an endless loop if it's a permanent error in the configuration.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
 include/hw/virtio/vhost-backend.h |  3 ++-
 hw/virtio/vhost-backend.c         |  2 +-
 hw/virtio/vhost-user.c            | 41 ++++++++++++++++---------------
 hw/virtio/vhost-vdpa.c            |  2 +-
 hw/virtio/vhost.c                 | 13 +++++-----
 5 files changed, 32 insertions(+), 29 deletions(-)

diff --git a/include/hw/virtio/vhost-backend.h b/include/hw/virtio/vhost-backend.h
index 8a6f8e2a7a..728ebb0ed9 100644
--- a/include/hw/virtio/vhost-backend.h
+++ b/include/hw/virtio/vhost-backend.h
@@ -37,7 +37,8 @@ struct vhost_scsi_target;
 struct vhost_iotlb_msg;
 struct vhost_virtqueue;
 
-typedef int (*vhost_backend_init)(struct vhost_dev *dev, void *opaque);
+typedef int (*vhost_backend_init)(struct vhost_dev *dev, void *opaque,
+                                  Error **errp);
 typedef int (*vhost_backend_cleanup)(struct vhost_dev *dev);
 typedef int (*vhost_backend_memslots_limit)(struct vhost_dev *dev);
 
diff --git a/hw/virtio/vhost-backend.c b/hw/virtio/vhost-backend.c
index 31b33bde37..f4f71cf58a 100644
--- a/hw/virtio/vhost-backend.c
+++ b/hw/virtio/vhost-backend.c
@@ -30,7 +30,7 @@ static int vhost_kernel_call(struct vhost_dev *dev, unsigned long int request,
     return ioctl(fd, request, arg);
 }
 
-static int vhost_kernel_init(struct vhost_dev *dev, void *opaque)
+static int vhost_kernel_init(struct vhost_dev *dev, void *opaque, Error **errp)
 {
     assert(dev->vhost_ops->backend_type == VHOST_BACKEND_TYPE_KERNEL);
 
diff --git a/hw/virtio/vhost-user.c b/hw/virtio/vhost-user.c
index ee57abe045..024cb201bb 100644
--- a/hw/virtio/vhost-user.c
+++ b/hw/virtio/vhost-user.c
@@ -1856,7 +1856,8 @@ static int vhost_user_postcopy_notifier(NotifierWithReturn *notifier,
     return 0;
 }
 
-static int vhost_user_backend_init(struct vhost_dev *dev, void *opaque)
+static int vhost_user_backend_init(struct vhost_dev *dev, void *opaque,
+                                   Error **errp)
 {
     uint64_t features, protocol_features, ram_slots;
     struct vhost_user *u;
@@ -1871,7 +1872,7 @@ static int vhost_user_backend_init(struct vhost_dev *dev, void *opaque)
 
     err = vhost_user_get_features(dev, &features);
     if (err < 0) {
-        return err;
+        return -EPROTO;
     }
 
     if (virtio_has_feature(features, VHOST_USER_F_PROTOCOL_FEATURES)) {
@@ -1880,7 +1881,7 @@ static int vhost_user_backend_init(struct vhost_dev *dev, void *opaque)
         err = vhost_user_get_u64(dev, VHOST_USER_GET_PROTOCOL_FEATURES,
                                  &protocol_features);
         if (err < 0) {
-            return err;
+            return -EPROTO;
         }
 
         dev->protocol_features =
@@ -1891,14 +1892,14 @@ static int vhost_user_backend_init(struct vhost_dev *dev, void *opaque)
             dev->protocol_features &= ~(1ULL << VHOST_USER_PROTOCOL_F_CONFIG);
         } else if (!(protocol_features &
                     (1ULL << VHOST_USER_PROTOCOL_F_CONFIG))) {
-            error_report("Device expects VHOST_USER_PROTOCOL_F_CONFIG "
-                    "but backend does not support it.");
-            return -1;
+            error_setg(errp, "Device expects VHOST_USER_PROTOCOL_F_CONFIG "
+                       "but backend does not support it.");
+            return -EINVAL;
         }
 
         err = vhost_user_set_protocol_features(dev, dev->protocol_features);
         if (err < 0) {
-            return err;
+            return -EPROTO;
         }
 
         /* query the max queues we support if backend supports Multiple Queue */
@@ -1906,12 +1907,12 @@ static int vhost_user_backend_init(struct vhost_dev *dev, void *opaque)
             err = vhost_user_get_u64(dev, VHOST_USER_GET_QUEUE_NUM,
                                      &dev->max_queues);
             if (err < 0) {
-                return err;
+                return -EPROTO;
             }
         }
         if (dev->num_queues && dev->max_queues < dev->num_queues) {
-            error_report("The maximum number of queues supported by the "
-                         "backend is %" PRIu64, dev->max_queues);
+            error_setg(errp, "The maximum number of queues supported by the "
+                       "backend is %" PRIu64, dev->max_queues);
             return -EINVAL;
         }
 
@@ -1920,9 +1921,9 @@ static int vhost_user_backend_init(struct vhost_dev *dev, void *opaque)
                     VHOST_USER_PROTOCOL_F_SLAVE_REQ) &&
                  virtio_has_feature(dev->protocol_features,
                     VHOST_USER_PROTOCOL_F_REPLY_ACK))) {
-            error_report("IOMMU support requires reply-ack and "
-                         "slave-req protocol features.");
-            return -1;
+            error_setg(errp, "IOMMU support requires reply-ack and "
+                       "slave-req protocol features.");
+            return -EINVAL;
         }
 
         /* get max memory regions if backend supports configurable RAM slots */
@@ -1932,15 +1933,15 @@ static int vhost_user_backend_init(struct vhost_dev *dev, void *opaque)
         } else {
             err = vhost_user_get_max_memslots(dev, &ram_slots);
             if (err < 0) {
-                return err;
+                return -EPROTO;
             }
 
             if (ram_slots < u->user->memory_slots) {
-                error_report("The backend specified a max ram slots limit "
-                             "of %" PRIu64", when the prior validated limit was %d. "
-                             "This limit should never decrease.", ram_slots,
-                             u->user->memory_slots);
-                return -1;
+                error_setg(errp, "The backend specified a max ram slots limit "
+                           "of %" PRIu64", when the prior validated limit was "
+                           "%d. This limit should never decrease.", ram_slots,
+                           u->user->memory_slots);
+                return -EINVAL;
             }
 
             u->user->memory_slots = MIN(ram_slots, VHOST_USER_MAX_RAM_SLOTS);
@@ -1958,7 +1959,7 @@ static int vhost_user_backend_init(struct vhost_dev *dev, void *opaque)
     if (dev->vq_index == 0) {
         err = vhost_setup_slave_channel(dev);
         if (err < 0) {
-            return err;
+            return -EPROTO;
         }
     }
 
diff --git a/hw/virtio/vhost-vdpa.c b/hw/virtio/vhost-vdpa.c
index ee51863d28..c2aadb57cb 100644
--- a/hw/virtio/vhost-vdpa.c
+++ b/hw/virtio/vhost-vdpa.c
@@ -273,7 +273,7 @@ static void vhost_vdpa_add_status(struct vhost_dev *dev, uint8_t status)
     vhost_vdpa_call(dev, VHOST_VDPA_SET_STATUS, &s);
 }
 
-static int vhost_vdpa_init(struct vhost_dev *dev, void *opaque)
+static int vhost_vdpa_init(struct vhost_dev *dev, void *opaque, Error **errp)
 {
     struct vhost_vdpa *v;
     uint64_t features;
diff --git a/hw/virtio/vhost.c b/hw/virtio/vhost.c
index 991c67ddcd..fd13135706 100644
--- a/hw/virtio/vhost.c
+++ b/hw/virtio/vhost.c
@@ -1289,9 +1289,9 @@ int vhost_dev_init(struct vhost_dev *hdev, void *opaque,
                    VhostBackendType backend_type, uint32_t busyloop_timeout,
                    Error **errp)
 {
+    ERRP_GUARD();
     uint64_t features;
     int i, r, n_initialized_vqs = 0;
-    Error *local_err = NULL;
 
     hdev->vdev = NULL;
     hdev->migration_blocker = NULL;
@@ -1299,9 +1299,11 @@ int vhost_dev_init(struct vhost_dev *hdev, void *opaque,
     r = vhost_set_backend_type(hdev, backend_type);
     assert(r >= 0);
 
-    r = hdev->vhost_ops->vhost_backend_init(hdev, opaque);
+    r = hdev->vhost_ops->vhost_backend_init(hdev, opaque, errp);
     if (r < 0) {
-        error_setg(errp, "vhost_backend_init failed");
+        if (!*errp) {
+            error_setg_errno(errp, -r, "vhost_backend_init failed");
+        }
         goto fail;
     }
 
@@ -1369,9 +1371,8 @@ int vhost_dev_init(struct vhost_dev *hdev, void *opaque,
     }
 
     if (hdev->migration_blocker != NULL) {
-        r = migrate_add_blocker(hdev->migration_blocker, &local_err);
-        if (local_err) {
-            error_propagate(errp, local_err);
+        r = migrate_add_blocker(hdev->migration_blocker, errp);
+        if (*errp) {
             error_free(hdev->migration_blocker);
             goto fail_busyloop;
         }
-- 
2.30.2



  parent reply	other threads:[~2021-06-09 15:53 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-06-09 15:46 [PATCH 0/7] vhost-user-blk: Implement reconnection during realize Kevin Wolf
2021-06-09 15:46 ` [PATCH 1/7] vhost: Add Error parameter to vhost_dev_init() Kevin Wolf
2021-06-10  9:05   ` Stefano Garzarella
2021-06-11 19:14   ` Raphael Norwitz
2021-06-09 15:46 ` Kevin Wolf [this message]
2021-06-10  9:07   ` [PATCH 2/7] vhost: Distinguish errors in vhost_backend_init() Stefano Garzarella
2021-06-11 19:43   ` Raphael Norwitz
2021-06-09 15:46 ` [PATCH 3/7] vhost: Return 0/-errno in vhost_dev_init() Kevin Wolf
2021-06-10  9:09   ` Stefano Garzarella
2021-06-11 19:49   ` Raphael Norwitz
2021-06-09 15:46 ` [PATCH 4/7] vhost-user-blk: Add Error parameter to vhost_user_blk_start() Kevin Wolf
2021-06-10  9:11   ` Stefano Garzarella
2021-06-11 19:55   ` Raphael Norwitz
2021-06-09 15:46 ` [PATCH 5/7] vhost: Distinguish errors in vhost_dev_get_config() Kevin Wolf
2021-06-10  9:16   ` Stefano Garzarella
2021-06-11 20:08   ` Raphael Norwitz
2021-06-09 15:46 ` [PATCH 6/7] vhost-user-blk: Factor out vhost_user_blk_realize_connect() Kevin Wolf
2021-06-10  9:18   ` Stefano Garzarella
2021-06-11 20:11   ` Raphael Norwitz
2021-06-09 15:46 ` [PATCH 7/7] vhost-user-blk: Implement reconnection during realize Kevin Wolf
2021-06-10  9:23   ` Stefano Garzarella
2021-06-11 20:15   ` Raphael Norwitz
2021-06-30 12:39 ` [PATCH 0/7] " Kevin Wolf

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210609154658.350308-3-kwolf@redhat.com \
    --to=kwolf@redhat.com \
    --cc=mst@redhat.com \
    --cc=qemu-block@nongnu.org \
    --cc=qemu-devel@nongnu.org \
    --cc=raphael.norwitz@nutanix.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).